Configure R3 to replicate zdata to CRM

Hi all
This is my requirement: I need to develop a tx in R3 for some zdata, when I click to save the data the system must replicate it to CRM into Ztable. The data is not saved into any table in R3. I already check some information about BDOCs, adapter object, etc but I'm not able to generate the Bdoc from R3 tx. How to implement a BTE or something in R3 to trigger the replication? Any idea? Note that initial load is not necessary
Thanks a lot.

If you do not want to persist the data in R/3 but need that persisted only in CRM, then there won't be a need for middleware after all. Middleware is effective for data persistence in both the systems. A new adapter for this will be a over design. You can probably develop a RFC enabled function module written in the CRM system to store the zdata and use that RFC in R/3.

Similar Messages

Automatic replication of Configuration from R/3 (ECC) to CRM 2007

Hi all,
We would like to set up an automatic replication of configuration maintained in R/3, e.g. Customer group 1, Payment terms, Incoterms, etc.. in order to secure consistency between R/3 and CRM as well as reduce work load.
As I understand, Customer data (customer_main) is supported by SAP but how about Configuration entries?
Is it possible?
Is it standard?
What is the way forward?
Your input is highly appreciated.
Thanks,
//Anders

Anders,
Take a look here for a start:
http://help.sap.com/saphelp_crm60/helpdata/en/00/cbe527805d23439ff8abd3813ec8fc/frameset.htm
Take care,
Stephen

Email configuration with Office 365 exchange- MS CRM online 2015

Hi,
Is there any link available which I can refer to configure Office 365 exchange with Ms Dynamics CRM 2015?
Thanks
Regards.

Please refer this:
https://msdn.microsoft.com/en-us/library/hh670607.aspx?f=255&MSPPError=-2147217396
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

How to configure marketing org model in sap crm

Hi Folks,
I want to configure my clients marketing,sales organization structure in my SAP CRM system.Currently all these have been replicated from ECC (HR&SD) to CRM and I have to modify, enhance the structure by adding positions and users based on clients current org structure.This is my requirement.Please help and guide how to do this in my CRM sytem as I am having difficulty to figure out which structure should be enhanced and how should the attributes be assigned.
Regards
Jaya

Hi Jayalakshmi
Try to use this guides
C02 - CRM Organizational Model Standalone
https://help.sap.com/bp_crmv12007/CRM_DE/BBLibrary/html/C01_EN_DE.htm
If you want to use client org structure you can use this consolut - CRM_CSDR_ORGANIGRAPH - Buying Center

How to configure the RFC destination of ERP-CRM connection when moving to Q

Hi Experts,
I set up a ERP sales order and quotation in CRM but under configuration
Customer Relationship Management -->Transactions -->Settings for Sales Transactions -->Define Profile for ERP Sales Transactions
you can only configure one which is i already did in development now we are moving to Quality then next to Prod.
Do you mean we will change this everytime we move to different environment thanks in advanced
Br,
Etrafanob

Hi Etrafanob,
Yes, in each system you will have to change the RFC destination for this as the destination set in your development system will normally be transported through to QA and production. To make the change you will need to contact your basis team and request the system client to be open for configuration changes in transaction SCC4.
I hope this helps.
Regards,
David.

Inbound email configuration is not working in SAP CRM 7.0

We have issue with the Inbound mail in SAP CRM 7.0, the emails from external ID (eg *@gmail.com) unable to receive in SAP Mailbox.
SMTP Settings as per the note : 455140 have been done and its working fine, we are able to send email from SAP to external server.
Also as per the note 607108 telnet test was successful and we can see the email in SOIN,
However if we send a mail from Gmail to SAP it is not visible in SOIN and it is bouncing back with error
said: 553 5.1.8 <[email protected]>... Domain of sender address
[email protected] does not exist (in reply to MAIL FROM command)
I have attached screenshot of the SOIN.

Hi Garcia,
I have checked with the Network team who manages Exchange server and they have mentioned that it is bouncing back from our CRM host with the error as below,
said: 553 5.1.8 <[email protected]>... Domain of sender address
[email protected] does not exist (in reply to MAIL FROM command)
Regards,
Arpit

How to replicate Customer to CRM from R/3?

Hi,
I have a problem while replicating a Customer.
I made some changes to the Customer in R/3 and these changes are not getting replicated to CRM.
So, what could be the problem?
Raghu

Hi Raghu,
Please refer the Best Practices document for replicating BP's from R/3 to CRM. Please have a look the following document for your information.
http://help.sap.com/bp_crmv340/CRM_DE/index.htm
under Technical Information->Building Block Library->B09: CRM Replication. page no.45 onwards.
Reward if it helps.
Best Regards,
Johnny.

How to Configure ReturnAuthorizationNotification Form in Action Profile(CRM

Hi All,
I am trying to assign Return Authorization Notification (ZForm) in the CRM Transaction through Action Profile. It is asking for "Object Type Name", "Context Class" 'Processing Class" and "Processing Method" parameters. Can any one explain these parameters?
Any steps by step process for assigning Return Authorization Notification Form in CRM through Action Profile in SPRO .
Thanks for answering this question.
Regards,
Dinesh

Hi Dinesh,
For sending Notification (ZForm) in the CRM Transaction through Action Profile follow below steps, i dont know for which transaction u want to create action (i.e. Lead, Activity, Sales Order)
1) In Action Profile for Lead
    Category of Object Type : Business Object Repository
    Object Type Name : BUS2000108 (this is for Lead)
    Date Profile : u r Date profle of transaction
    Used Common Profile : Blank
    Context Class : CL_DOC_CONTEXT_CRM_ORDER
2) Action Definition (Action Setting)
   Processing Time : Processing when saving document
   Processing Times Not Permitted : No Restrictions
   Sort Order For Display : 1
   Schedule Automatically : X
   Delete After Processing :
   Changeable in Dialog : X
   Executable in Dialog : X
   Display in Toolbox :   X
Partner Function : (Assign u r Partner function for which u want to send Notification mail)
Determination Technology : Determination Using Conditions that Can Be T
Rule Type : Workflow Conditions
Action Merging : Max. 1 Action for Each Action Definition
3) Processing Types
    Process Type : Smart Forms Mail
    Mail Settings : Form Name : Assign u r Zsmart form
    Processing Class: CL_DOC_PROCESSING_CRM_ORDER
    Processing Method : CRM_ORDER_EXEC_SMART_FORM
    Archive Mode : 1 Mail only
4) In Action Condition set Start and schedule condition for u r action definition
Regards,
DD's

Replicate Quotation from CRM to ECC

Hi,
Here is my requirement,
Once the quotation is created in CRM and the field u201CCustomer req. dateu201D is entered, this has to be replicated in a custom field in the ECC quotation. If the u201Ccustomer req. dateu201D is updated in CRM, this has to be update also in the ECC quotation. No changes to the u201Ccustomer req. dateu201D are allowed from ECC.
Regards,
Prashant

Hi Chandrakant,
Thanks for ur help, but could u please tell me how to implement mapping exit on ECC: CRM0_200???
In my case Custom er Req Date in CRM is not a Custom field, I can see the value for this field in BDOC BUS_TRANS_MSG.
Now I just need to map the value of Customer req date from this BDOC to custom field in ECC..
Appreciate for ur help.
Thanks & Regards,
Prashant Patil

How to configure and test a workflow in CRM 5.0

Hi All,
As I am new to workflows it will be great if any of you shared a guide where I can create and test a workflow in CRM 5.0 tcode PPOMW.
Thanks for all your help in advance.
Best regards,
Divya

This might help:
http://help.sap.com/saphelp_crm50/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/cc/d40b37da4de72fe10000009b38f889/content.htm
Regards,
Kaushal

Replicate sales orders from ecc to crm

Hi experts,
We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
thanks in advance
Andy

Hi,
To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
You can search the forum for a detailed document with special focus on the integration points.
Also have a look at the following SAP HELP link:
http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
Hope this helps.
Thanks,
Samantak.

CRM Contract replicate to ECC Debite memo

HI expert team
In standard replication from CRM Contract replicate to ECC Debite memo, I have some material in ECC with Material type KMAT Configurial product, same material code and description created in CRM with material type as service material, When i create service contract and release it is giving replication error with "Product Cannot be recorded in ECC", When i create debite memo with same material code system creating debet memo and item category determination in ecc as debet memo item category in debete memo even though material is configural product,
in the same steps i have some service material in ECC as service material created with service material type, for these material i created in CRM with same code and description, when i create service contract system replicating as debit memo,
Thanks in advance
Regards
Rachappa
9448472121

Hi,
There are prerequisites to be maintained in CRM and ERP for CRM contract to be replicated in ERP as a debit memo.
Please find the details in the below link:
http://help.sap.com/saphelp_crm50/helpdata/en/65/9c4d3bcf95926ae10000000a114084/frameset.htm
In your case I assume Debit memo is not being created for the Service product and giveing error "Product Cannot be recorded in ECC", because system is finding the same product in ECC as configurable material type (Service product in CRM, config material in ECC).
As per the prerequisite Synchronization of master data (SAP CRM and SAP ERP) should be maintained
All business partners used in SAP CRM transaction documents also exist in SAP ERP.
Service products in SAP CRM exist as materials in SAP ERP.
Hope this helps!
Regards,
Chethan
Edited by: Chethan Kumar C M on Oct 8, 2009 6:12 AM
Edited by: Chethan Kumar C M on Oct 8, 2009 6:29 AM

Replicate CRM Contract to ECC

Hi All
I've a scenario where
(1) I have to replicate CRM Service Contracts to ECC. Is it possible to do the same? If possible then how?
(2) Is it possible to maintain SLA values in CRM Sales Contract at which can be transfered to the Orders which are created with reference to the respective Contract?
Thanks in advance.
Avi

Hi,
There are prerequisites to be maintained in CRM and ERP for CRM contract to be replicated in ERP as a debit memo.
Please find the details in the below link:
http://help.sap.com/saphelp_crm50/helpdata/en/65/9c4d3bcf95926ae10000000a114084/frameset.htm
In your case I assume Debit memo is not being created for the Service product and giveing error "Product Cannot be recorded in ECC", because system is finding the same product in ECC as configurable material type (Service product in CRM, config material in ECC).
As per the prerequisite Synchronization of master data (SAP CRM and SAP ERP) should be maintained
All business partners used in SAP CRM transaction documents also exist in SAP ERP.
Service products in SAP CRM exist as materials in SAP ERP.
Hope this helps!
Regards,
Chethan
Edited by: Chethan Kumar C M on Oct 8, 2009 6:12 AM
Edited by: Chethan Kumar C M on Oct 8, 2009 6:29 AM

How to Configure Table Graphics in SAP CRM 7.0

Dear all,
What is the main use of Table Graphics and How can we configure table graphics functionality in SAP CRM 7.0.
Kindly suggest in case any best practice documentation or other configuration document is available
Your help will be highly appreciated
Best regards
Raghu ram

Hello Devi,
There are three ways you can load Master Data in BPC
1) Copy and paste.
Download master data in flat file .Copy the master data and paste in members of dimension after that process the dimension.
2) Using SISS Pakage - load Flat File into BPC-Cube
3) Using SQL Command.
Thanks.
With regards,
Anand Kumar

How to replicate a customized condition table from ECC to CRM

Dear All,
We have created a new condition table in ECC, using a new set of key fields to define sales district specific product price. This table is in ECC only and we would like to replicate it to CRM. Could you please let me know how we can do that? What replication object should we use?
Thanks in advance!
Erinn

Hi,
Use DNL_CUST_CNDALL, this would create the database table in CRM. Also you might need to run other loads corresponding to your scenario like DNL_CUST_CND_PR, DNL_CUST_PRC etc
Regards
Prasenjit

Configure R3 to replicate zdata to CRM

Similar Messages

Maybe you are looking for