Configure Windows Server Essentials (2012R2) "Identified problem": "Certificate Issuer is installed on this server" stops the configuration
On a server 2012R2 Essentials when trying to install the essentials experience the first install works ok but the configuration allways stops with the message "Certificate Issuer is installed on this server" and no way to continue the configuration.
Windows/Logs/CBS/
2014-07-24 21:10:04, Info CBS TI: --- Initializing Trusted Installer ---
2014-07-24 21:10:04, Info CBS TI: Last boot time: 2014-07-24 18:36:03.489
2014-07-24 21:10:04, Info CBS Starting TrustedInstaller initialization.
2014-07-24 21:10:04, Info CBS Ending TrustedInstaller initialization.
2014-07-24 21:10:04, Info CBS Starting the TrustedInstaller main loop.
2014-07-24 21:10:04, Info CBS TrustedInstaller service starts successfully.
2014-07-24 21:10:04, Info CBS No startup processing required, TrustedInstaller service was not set as autostart
2014-07-24 21:10:04, Info CBS Startup processing thread terminated normally
2014-07-24 21:10:04, Info CBS Starting TiWorker initialization.
2014-07-24 21:10:04, Info CBS Ending TiWorker initialization.
2014-07-24 21:10:04, Info CBS Starting the TiWorker main loop.
2014-07-24 21:10:04, Info CBS TiWorker starts successfully.
2014-07-24 21:10:04, Info CBS Universal Time is: 2014-07-24 19:10:04.379
2014-07-24 21:10:04, Info CBS Loaded Servicing Stack v6.3.9600.17200 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.17200_none_fa7026dd9b04586e\cbscore.dll
2014-07-24 21:10:04, Info CSI 00000001@2014/7/24:19:10:04.379 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffd2cb360e5 @0x7ffd2de92e53 @0x7ffd2de924ac @0x7ff60b37d2df @0x7ff60b37d9e4
@0x7ffd588d2385)
2014-07-24 21:10:04, Info CBS Could not load SrClient DLL from path: SrClient.dll. Continuing without system restore points.
2014-07-24 21:10:04, Info CBS SQM: Initializing online with Windows opt-in: True
2014-07-24 21:10:04, Info CBS SQM: Cleaning up report files older than 10 days.
2014-07-24 21:10:04, Info CBS SQM: Requesting upload of all unsent reports.
2014-07-24 21:10:04, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2
2014-07-24 21:10:04, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6
2014-07-24 21:10:04, Info CBS NonStart: Set pending store consistency check.
2014-07-24 21:10:04, Info CBS Session: 30386034_3758808251 initialized by client WinMgmt.
2014-07-24 21:10:04, Info CBS Enumerating Foundation package: Microsoft-Windows-ServerCore-Package~31bf3856ad364e35~amd64~~6.3.9600.16384, this could be slow
2014-07-24 21:10:05, Info CSI 00000002 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x172dbed940
2014-07-24 21:10:05, Info CSI 00000003 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-07-24 21:10:05, Info CSI 00000004 Created NT transaction (seq 1) result 0x00000000, handle @0x25c
2014-07-24 21:10:08, Info CSI 00000005 Poqexec successfully registered in [ml:26{13},l:24{12}]"SetupExecute"
2014-07-24 21:10:08, Info CSI 00000006@2014/7/24:19:10:08.151 Beginning NT transaction commit...
2014-07-24 21:10:08, Info CSI 00000007@2014/7/24:19:10:08.182 CSI perf trace:
CSIPERF:TXCOMMIT;32854
2014-07-24 21:10:08, Info CSI 00000008 CSI Store 99552754976 (0x000000172dce7d20) initialized
2014-07-24 21:10:08, Info CSI 00000009@2014/7/24:19:10:08.182 CSI Transaction @0x172e9bcaa0 initialized for deployment engine {d16d444c-56d8-11d5-882d-0080c847b195} with flags 00000002
and client id [26]"TI5.30386034_3758808251:1/"
2014-07-24 21:10:08, Info CSI 0000000a@2014/7/24:19:10:08.182 CSI Transaction @0x172e9bcaa0 destroyed
2014-07-24 21:10:19, Info CBS Session: 30386012_3156824848 initialized by client DISM Package Manager Provider.
2014-07-24 21:12:19, Info CBS Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP
2014-07-24 21:12:19, Info CBS TiWorker signaled for shutdown, going to exit.
2014-07-24 21:12:19, Info CBS Ending the TiWorker main loop.
2014-07-24 21:12:19, Info CBS Starting TiWorker finalization.
2014-07-24 21:12:19, Info CBS Ending the TrustedInstaller main loop.
2014-07-24 21:12:19, Info CBS Starting TrustedInstaller finalization.
2014-07-24 21:12:19, Info CBS Ending TrustedInstaller finalization.
2014-07-24 21:12:20, Info CBS Ending TiWorker finalization.
Any ideas?
//Christer
Hi Justin!
nltest /server:"servername" /sc_reset:"domaninname" returns: "I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN"
Dcdiag /q returns : An error occurred. EventID: 0xC0001B77
The text log was not small enough to post here..
Regards.
Christer
Can not find anything directly related in windows-logs but here is the latest log from CBS folder..
2014-07-28 11:04:25, Info CSI 00000888 [DIRSD OWNER WARNING] Directory [ml:520{260},l:118{59}]"\??\C:\Windows\Inf\Windows Workflow Foundation 3.0.0.0\041D" is not owned but specifies
SDDL in component Microsoft-Windows-WWFCoreComp.Resources, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"sv-se", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:25, Info CSI 00000889 [DIRSD OWNER WARNING] Directory [ml:128{64},l:126{63}]"\??\C:\Windows\SysWOW64\WindowsPowerShell\v1.0\Modules\MsDtc\en" is not owned but specifies
SDDL in component Microsoft.Dtc.PowerShell.Non_msil.Resources, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088a [DIRSD OWNER WARNING] Directory [ml:134{67},l:132{66}]"\??\C:\Windows\SysWOW64\WindowsPowerShell\v1.0\Modules\MsDtc\en-US" is not owned but specifies
SDDL in component Microsoft.Dtc.PowerShell.Scripts.Resources, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088b [DIRSD OWNER WARNING] Directory [ml:520{260},l:134{67}]"\??\C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework" is not owned but specifies
SDDL in component Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088c [DIRSD OWNER WARNING] Directory [ml:520{260},l:118{59}]"\??\C:\Windows\Inf\Windows Workflow Foundation 3.0.0.0\0000" is not owned but specifies
SDDL in component Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088d [DIRSD OWNER WARNING] Directory [ml:520{260},l:114{57}]"\??\C:\Program Files (x86)\Reference Assemblies\Microsoft" is not owned but specifies SDDL
in component Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088e [DIRSD OWNER WARNING] Directory [ml:520{260},l:144{72}]"\??\C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v3.0" is not owned
but specifies SDDL in component Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088f [DIRSD OWNER WARNING] Directory [ml:520{260},l:94{47}]"\??\C:\Program Files (x86)\Reference Assemblies" is not owned but specifies SDDL in component
Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:30, Info CSI 00000890 Ignoring duplicate ownership for directory [l:72{36}]"\??\C:\Windows\microsoft.net\authman" in component Microsoft.Interop.Security.AzRoles, Version
= 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:31, Info CSI 00000891 [SR] Verify complete
2014-07-28 11:04:31, Info CSI 00000892 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:31, Info CSI 00000893 [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:36, Info CSI 00000894 [SR] Verify complete
2014-07-28 11:04:36, Info CSI 00000895 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:36, Info CSI 00000896 [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:40, Info CSI 00000897 [DIRSD OWNER WARNING] Directory [ml:520{260},l:120{60}]"\??\C:\Windows\Microsoft.NET\Framework\v2.0.50727\RedistList" is not owned but specifies
SDDL in component NetFx-ASSEMBLYLIST_XML, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:42, Info CSI 00000898 [SR] Verify complete
2014-07-28 11:04:42, Info CSI 00000899 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:42, Info CSI 0000089a [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:46, Info CSI 0000089b [SR] Verify complete
2014-07-28 11:04:46, Info CSI 0000089c [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:46, Info CSI 0000089d [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:52, Info CSI 0000089e [SR] Verify complete
2014-07-28 11:04:52, Info CSI 0000089f [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:52, Info CSI 000008a0 [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:58, Info CSI 000008a1 [SR] Verify complete
2014-07-28 11:04:58, Info CSI 000008a2 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:58, Info CSI 000008a3 [SR] Beginning Verify and Repair transaction
2014-07-28 11:05:02, Info CSI 000008a4 [SR] Verify complete
2014-07-28 11:05:02, Info CSI 000008a5 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:05:02, Info CSI 000008a6 [SR] Beginning Verify and Repair transaction
2014-07-28 11:05:08, Info CSI 000008a7 [SR] Verify complete
2014-07-28 11:05:08, Info CSI 000008a8 [SR] Verifying 52 (0x0000000000000034) components
2014-07-28 11:05:08, Info CSI 000008a9 [SR] Beginning Verify and Repair transaction
2014-07-28 11:05:09, Info CSI 000008aa [DIRSD OWNER WARNING] Directory [ml:520{260},l:56{28}]"\??\C:\Windows\system\Speech" is not owned but specifies SDDL in component Windows-Media-SpeechSynthesis-WinRT,
pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:05:09, Info CSI 000008ab Ignoring duplicate ownership for directory [l:56{28}]"\??\C:\Windows\system\Speech" in component Windows-Media-SpeechSynthesis-WinRT, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:05:09, Info CSI 000008ac [SR] Verify complete
2014-07-28 11:05:09, Info CSI 000008ad [SR] Repairing 1 components
2014-07-28 11:05:09, Info CSI 000008ae [SR] Beginning Verify and Repair transaction
2014-07-28 11:05:09, Info CSI 000008af Hashes for file member \??\C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess\Web.config do not match actual file [l:20{10}]"Web.config"
Found: {l:32 b:jiP+IRWGZxsG0nX6il5MCZofFThiSfytb8Ih27r5EPk=} Expected: {l:32 b:KR7DbPqdCKMwdiZI2XDSr42o4ujtpZlzfX9ud+ODKRM=}
2014-07-28 11:05:09, Info CSI 000008b0 [SR] Repairing corrupted file [ml:520{260},l:120{60}]"\??\C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess"\[l:20{10}]"Web.config" from
store
2014-07-28 11:05:09, Info CSI 000008b1 [SR] Repair complete
2014-07-28 11:05:09, Info CSI 000008b2 [SR] Committing transaction
2014-07-28 11:05:09, Info CSI 000008b3 Creating NT transaction (seq 2), objectname [6]"(null)"
2014-07-28 11:05:09, Info CSI 000008b4 Created NT transaction (seq 2) result 0x00000000, handle @0xba4
2014-07-28 11:05:11, Info CSI 000008b5@2014/7/28:09:05:11.308 Beginning NT transaction commit...
2014-07-28 11:05:11, Info CSI 000008b6@2014/7/28:09:05:11.470 CSI perf trace:
CSIPERF:TXCOMMIT;163479
2014-07-28 11:05:11, Info CSI 000008b7 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired
2014-07-28 11:07:13, Info CBS Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP
2014-07-28 11:07:13, Info CBS TiWorker signaled for shutdown, going to exit.
2014-07-28 11:07:13, Info CBS Ending the TiWorker main loop.
2014-07-28 11:07:13, Info CBS Starting TiWorker finalization.
2014-07-28 11:07:13, Info CBS Ending the TrustedInstaller main loop.
2014-07-28 11:07:13, Info CBS Starting TrustedInstaller finalization.
2014-07-28 11:07:13, Info CBS Ending TrustedInstaller finalization.
2014-07-28 11:07:13, Info CBS Ending TiWorker finalization.
Regards. Christer
Similar Messages
-
I can no longer read PDF files. The window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
-
WHAT CAN I DO... PLEASE HELP
ERROR SAYS THERE IS A PROBLEM WITH THIS WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR TIS INSTALL FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN
That one is often associated with trouble with your Apple Software Update.
Is your Apple Software Update currently launching on the PC? -
Provider client software has not been properly installed on this server
Hi All,
I am in a process of setting up the DR for the SAP R/3 4.7 system, which is on Windows and SQL 2000 SP3.
While installing the SPA on the DR Server, i am facing the below attached problem in the DB Instance installation. the CI Installation goes through fine. but it stop in the Database Load section. with the screen showing Running 3 and waiting 0.
Details:
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: START OF LOG: 20080220124003
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\GRP\SYS\exe\run/R3load.exe -ctf I I:\EXPORT6/DATA/SAPAPPL0.STR I:\EXPORT6/DB/DDLMSS.TPL C:\SAPinst MSSQL SAPINST/SAPAPPL0.TSK MSS -l C:\SAPinst MSSQL SAPINST/SAPAPPL0.log
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: job completed
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: END OF LOG: 20080220124003
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: START OF LOG: 20080220124039
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\GRP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst MSSQL SAPINST/SAPAPPL0.cmd -l C:\SAPinst MSSQL SAPINST/SAPAPPL0.log -loadprocedure fast
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: failed to establish conn. 0
(DB) ERROR: db_connect rc = 256
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: failed to establish conn. 0
(DB) ERROR: DbSlErrorMsg rc = 29
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: END OF LOG: 20080220124040
The same error come in a lot of other scripts of DB Load.
I have installed the SQL Server 2000 SP3 with Hot fix 929.
Could some one help me to get the same fixed
Thanks a lot in advance.
Best Regards
Mahendra K
+91 9867183370I have this problem too on an ASUS windows 8.1 PC.
Since installing itunes 11.1.5
Problem seems to be that the AMDS Apple Mobile Device Support does not install.
I also tried all options on this forum....
Who can help???
Thnx
Oscar -
Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.
Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.
Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table. On EFI Systems, Windows Can Only Be Installed to GPT.
I found one solution to this problem on hp forum but my laptop has boot legacy and does not disable the efi boot order.
HP Model# HP 1000-1140TU Notebook PC
Serial# 5cg2481dbg
Product# c8c94pa#uuf
This is solution which is found on hp forum
SolutionThe resolution to this issue depends on the the hard disk volume size:
Follow these steps if the hard disk volume size is less than 2.19 TB:
Temporarily disable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then disable the EFI Boot Sources .
Select File > Save Changes > Exit .
Install the Windows operating system.
Enable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then enable the EFI Boot Sources .
Select File > Save Changes > Exit .
Follow these steps if the hard disk volume size is greater than 2.19 TB:
Install the HP BIOS Update UEFI utility from the HP Web site:
Click here to access the document "HP BIOS Update UEFI" .
NOTE:The HP BIOS Update UEFI utility is installed by default on some HP computers.
Follow the steps in the Microsoft document titled "How to Configure UEFI/GPT-Based Hard Drive Partitions" (in English) to create a GPT partition.
Click here to access the document "How to Configure UEFI/GPT-Based Hard Drive Partitions" .
NOTEne or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside the HP Web site.I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea? -
Hey Im getting the following error when trying to install windows from a USB.
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks."
I installed the windows 8 (64bit) iso using boot camp to a usb. I was able to do this after changing the info.plist to allow me to place the iso on the usb. After I make the partition and start the install, I get the above error. I formatted the partition in the installation but I keep getting this error. I've repreated the entire process but i keep getting this errror and the disk utility says my partition is a Windows NT File System (NTFS) so im not sure what's going on. If you can help me that would be greatly appreciatedI am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea? -
When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?
iTunes: Missing folder or incorrect permissions may prevent authorization
Mac OS X
Log in to your computer using an administrator account.
In the Finder, choose Go to Folder from the Go menu.
Type: "/Users" (without quotes) and click Go.
If the Shared folder exists
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod -R 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod -R 1777 /Users/Shared
Press Return.
Quit Terminal.
If the Shared folder does not exist
The following steps will recreate the Shared folder if it is missing and ensure that it has been assigned using the correct permissions.
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Type or copy and paste the following command into the Terminal window:sudo mkdir -p /Users/Shared/
Press Return.
Enter your administrator account password when prompted, then press Return.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod 1777 /Users/Shared
Press Return.
Quit Terminal. -
I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?
I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message. -
I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." And I have no idea of where or how to fix this issue. Any help or suggestions will be greatly appreciated. I even tried to deauthorize this computer and got the same error message. HELP!
I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message. -
I don't understand what to do. The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
jackeskew wrote:
I don't understand what to do. The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
Can you explain a bit more about what you are trying to do or what you were trying to open? You need to add a lot more details.
Thanks
Pete -
Help, cannot sync completely with my ipad, and i also cannot remove or delete shared photos which are clogging up my ipad 64GB memory! Some issue with this keeps croppin gup, so frustrating:
"The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."
Not sure how we can correct his permissions problem, and whether authorising or deautorizing makes any difference, with more and more errors keep popping up, this got to be such after an update of the OS, can remember which!?
HELP!!!follow this:
Launch iTunes
select iTunes Store from the menu on the left side.
sign in via the link on the top right area if you haven't done so already
click the link where you Apple ID email appears, enter your Apple ID password, click View Account, this will take you to a page displaying detailed information about your Apple ID account.
The last item under Apple ID summary should be Computer Authorisations, click Deauthorize All
now reauthorize any computers as needed when the system prompts you.
good luck. -
I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss
how do I find the file and replace it or install it?I'll reload it tonight when I get home...basically, I bought a new iPhone and downloaded some new medical apps. also had to download an update for iTunes into my mac laptop so I could access iCloud (which was NOT on my prior iTunes software)
When I synched my new iPhone with the newly downloaded iTunes, I registered my iphone and tried to "back it up" to iCloud and the message indicating that "the required file was not found or has a permissions error...." popped up.
How do I correct the permissions error, or...am I able to do this somewhere? Or...how do I find the file that is missing?
Dr. Bob001 -
I keep getting this messae when I try to share itune to my new mac The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization -
please help me how to authorize my computer as it always say The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
Many thanks. If you're on Mac OS, let's try the following document:
iTunes: Missing folder or incorrect permissions may prevent authorization -
There was an error storing your authorization information on this computer.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
I'd try the following document with that one:
iTunes: Missing folder or incorrect permissions may prevent authorization
Maybe you are looking for
-
USB not detected in Solaris 10
I am using Solaris 10 . rmformat output is: Volmgt Node: /vol/dev/aliases/rmdisk0 Logical Node: /dev/rdsk/c2t0d0p0 Physical Node: /pci@0,0/pci17aa,1015@1d,7/storage@6/disk@0,0 Connected Device: JetFlash Transcend 4GB 8.07 Device Type: <Unknown> I cou
-
Can someone recommend a Mini Displayport Female to HDMI cord/adapter?
I would like to get an Apple 27" to use with my PC, which has both HDMI and DVI inputs. Thanks!
-
Set the value of a CWNumEdit Control from within the code
I am trying to update a CWNumEdit Control with data created during program execution. I am using the set_Text function but it does not seem to be working. I was wondering if there is something that I am missing to get this functionality to work. P
-
Focus cell editor component of JTable when starting editing by typing
Hello, everybody. We all know that the JTable component doesn't actually focus the actual cell editor component when editing is started by typing. But I need this functionality in an application of mine. So, I ask: is there a way to transfer focus to
-
Strange Problem In NWDS while devloping Adobe Offline Form
I am facing a strange problem in NWDS while devloping Offline Adobe Form, the implementation code gets erased once the project is deployed, even the source file also gets deleted.