Configuring AIR-WLC4402-50-K9 through CLI

Question

I have many  AIR-WLC4402-50-K9  devices to configure and the cli is frusterating- does anyone have a link to a step by step document that walks through assigning an IP, SSID, and enabling the radios using the cli?  I cant seem to find one that works completly.  I just need to assign it an ip so I can use the web gui!
Thnaks

Answer 1

Hi Brian,
I would suggest to modify your configuration as follows, so to be able to associate to the open SSID called "test".
Please see the changes I marked in red :
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$hDfR$kvTnx/C3JJ0KOqrQzgwuY1
no aaa new-model
dot11 syslog
dot11 ssid GTEST
dot11 ssid test
    authentication open     # add this
    guest-mode                 # add this
dot11 ssid test2
username Cisco password 7 047802150C2E
bridge irb
interface Dot11Radio0
ip address 10.10.10.100 255.255.255.0   # remove this
no ip route-cache
ssid test
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
ip address 10.10.10.101 255.255.255.0    # remove this
no ip route-cache
ssid GTEST
ssid test2
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.1.200 255.255.255.0       # open the web-gui through this IP address
no ip route-cache
ip default-gateway 192.168.1.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag 1 route ip
line con 0
line vty 0 4
login local
end
I hope this helps.
Regards,
Federico
If this answers your question please mark the question as "answered" and rate it, so other users can easily find it.