Configuring Alerts on Platform - Hyperic 5.8.4
Hello,
I'm trying to configure Alerts on one of the platform that i have on my hyperic server and i'm getting the below error
Also i need to know how can i configure to send an alarm when a server goes down or service ..etc
Thanks,
Hello,
Thank a lot , i found the problem again after restarting the server, but it was fixed after deleting the platform and re-adding it again, is there is any documents regarding the alerts? also i tried to restart the machine and nothing shows up regarding this alert, i want also to test the email functionality, i have a running MTA on the server and working fine.
Thanks,
Similar Messages
-
How to configure alerts in SAP R/3 System.
Hi,
We have R/3 system installed in our system.Now i want configure alerts to display for users.How can i configure alerts in that R/3 System.Send me the realted information and links.
Regards,
Kiran.Hi Bhogi,
The Alerts in SAP XI can be raised for error happening in:
1. Adapter Engine
2. Integration Engine.
1. These Alerts are system generated in case anything happens in either of the component.
For this you need to:
1. Create ALert Category in the Trnasaction ALRTCATDEF
2. Create Alert rules in Runtime Workbench--> ALert Configuration and associating these rules to Alert category.
If you want you can do it without a BPM
and throw an exception in case any of the values is missing:
have a look at this weblog on how to throw exceptions
in a nice way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Also just go through Raising Exceptions in SAP XI Mapping and see if it helps you solve the problem.
Also go through these links:
Forwarding Alerts to Alert Management (ALM)
Alert Management
XI: Alerts - Step by step
XI: Alerts - Troubleshooting guide
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
For a Simple case with BPM refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered..
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope it helps.....
Reward points if this helps
Regards
Vani. -
How to configure alerts for error in Subscriber in transactional replication in SQL server
Hi All,
I am getting the below error in the subscriber which i know how to resolve but i want an alert to be raised whenever there is an error in the Subscriber.I tried using the configure alerts in the warning tab in the Sqlmonitor.exe but it didn't worked.Can
anybody help me out please.
Command attempted:
if @@trancount > 0 rollback tran
(Transaction sequence number: 0x00000000000000000A9200000000, Command ID: 1)
Error messages:
Invalid date format (Source: MSSQLServer, Error number: 20025)
Get help: http://help/20025
Invalid date format (Source: MSSQLServer, Error number: 22007)
Get help: http://help/22007
Thanks,Can add with operator in sql server agent
SSMS -> Connect to the subscriber -> SQL Server Agent -> Alerts -> Double Click "Replication: agent failure" -> Response -> Add your operator with the alert type(s) you wish. (I recommend security groups instead of individuals).
Refer below thread
http://dba.stackexchange.com/questions/11971/how-do-i-set-up-an-alert-that-tells-me-when-a-replication-of-data-failed
Please click the Mark as answer button and vote as helpful if this reply solves your problem -
How to configure Alerts with out CCMS
Hi All,
Is there any chance to configure Alert management
or just alert if u get any error in adapter Monitor or message moni. please advice me. i want to get alert mail when there is an error in adapter moni or message moni.
Thanks in Advance.
SriramHi,
Yes u can raise an alert:
For raising an alert you need to first configure the alert please follow the below weblog written by Michal Krawczyk
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Configuration steps are: go to transaction ALRTCATDEF
1) Define Alert Category
2) Create container elements which are used for holding an error messages.
3) Recipient Determination.
Alert can be triggered in different ways.
1) Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
2) Triggering by Calling a Function Module in the Workplace Plug-In.
3) Triggering with an Event Linkage.
4) Triggering with the Post Processing Framework (PPF) or Message Control (MC)
5) Triggering from a Workflow.
6) Triggering from CCMS with autoreaction.
7) Triggering from BPM.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
8) Triggering alert by configuring a rule from RWB.
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
THis will raise adapter and integration engine related errors.
Hope this will help you.
Thnx
Chirag -
Hi,
All
we are doing IDOC To JDBC Scenario in our scenarion there is no NULL Check, using Value mapping we validating the data. here no concept of BPM. if any Error
occured in Value mapping we have to raise an elert to SAP system.if any system Error in we have to raise an alert to XI admin as well as SAP system.
how can we is there any documents
thnx in advance
regards
m.kumarHi,
The Alerts in SAP XI can be raised for error happening in:
1. Adapter Engine
2. Integration Engine.
1. These Alerts are system generated in case anything happens in either of the component.
For this you need to:
1. Create ALert Category in the Trnasaction ALRTCATDEF
2. Create Alert rules in Runtime Workbench--> ALert Configuration and associating these rules to Alert category.
If you want you can do it without a BPM
and throw an exception in case any of the values is missing:
have a look at this weblog on how to throw exceptions
in a nice way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Also just go through <a href="/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping Exceptions in SAP XI Mapping</a> and see if it helps you solve the problem.
Also go through these links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm">Forwarding Alerts to Alert Management (ALM)</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm">Alert Management</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step: Alerts - Step by step</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide: Alerts - Troubleshooting guide</a>
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
For a Simple case with BPM refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered..
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope it helps.....
Regards,
Abhy
Message was edited by: Abhy Thomas -
Alert Configuration / Alert Inbox - "404 Not Found" in PI 7.0
Hi ,
We are trying configure Alert Framework in PI 7.0.
When we are opening the Alert Configuration page through the link
http://<Hostname>:5<Sys.No>00/rwb/index.jsp -> Alert Configuration we are getting error " 404 Not Found"
But when we changed the exchangeProfile parameter com.sap.aii.rwb.server.centralmonitoring.httpport from 5<Sys.no>00 to 8<sys.no>0 we got the page displayed there.
But when we click that page it asks for authentication again !!!
And where we need to fix this redirection problem from 5<sys.no>00 to 8<sys.no>0 ..
the parameter -> icm/HTTP/j2ee_0
is holding this value
PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
Please suggest.
Thanks &Regards
MrutyunjayCould you please post the details..
We are also facing the same issue.
Thanks in Advance.
Regards
Sujan -
Not able to use Alert Configuration/Alert Inbox in the Runtime Workbench
Hi Experts,
I have installed PI 7.1 on my system. I'm not able to use the Alert Configuration/Alert Inbox in the Runtime WorkBench. It is asking for a logon and the logon which i used for ABAP & Java Stack is not working.
e.g., For ABAP Stack, the User Id is: "sapuser" & For Java Stack, the User Id is: "pisuper". But, both these User Id's are not working for the Alert Configuration/Alert Inbox in the RWB.
Can someone pls suggest me, how to proceed?
Br
G@neshHi Preethi,
Can u pls help me, how to check whether the relevant roles are assigned to this user i.e., pisuper for the JAVA stack in the UME or not? i even tried to use Alert Configuration/Alert Inbox with the User ID: ddic & j2ee_admin, but it too didn't work...
I would like to use Alert Configuration/Alert Inbox with my User Id: pisuper, which i'm using to logon to the JAVA stack
while exploring, i logged on to the useradmin page i.e., http://p71:58800/useradmin with the User Id: j2ee_admin... If this is correct, can u pls let me know how can i add the necessary roles to my User Id: pisuper so that i can use Alert Configuration/Alert Inbox with my User Id: pisuper
Br
G@nesh -
How to Configure alert for process failures
Hi Friends.
How to Configure alert for process failures due to any reasons like mapping, runtime exceptions .
I am devloping one scenario which is file to flatfile. In this scenario I am also using mail adapter for sending mail daily to admin that tells about record size and no of records parallely. I am not using BPM in this scenario.
I am having very little experience in XI.
Please answer this with clear steps so that I can do it.hi,
check the links below for all the details and help on configuring alerts
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b - How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 - Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - XI: Alerts configuration - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - XI: Alerts - Troubleshooting guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi -
How to configure alert when sender CChannel failes
Hi PI Gurus,
Is there is any way to get an alert when a sender channel fails (reason connection time out etc.).
We have configured alerts for other scenarios when mapping is failing. How to handle the other situation.
Regards,
Krishna ChauhanHi,
Please check below urls.
http://wiki.sdn.sap.com/wiki/display/XI/Alert%2bConfiguration%2bin%2bXI?bc=true
ALRTCATDEF table SALRTCATUS
http://help.sap.com/saphelp_nw04/Helpdata/EN/8a/3e2d4105f8d92be10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/96/f1033c128f4a7de10000000a114084/frameset.htm
Thanks
Ravi -
Hi,
i want to configure alerts in XI.im on sp16. while goig through pre requisites for alerts I am asked to configure a communication between CEN(central monitoing system) and ALM(central alert server) and choose this destination in transcation SALRT1.
What are the steps need to be done
Regards
kausikHi Kauisk,
Check this from SAP Help...
"If the central alert server is running on the local system in the same client, you do not have to maintain an RFC destination. In this case, you can simply enter NONE in transaction SALRT1."
http://help.sap.com/saphelp_nw2004s/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/content.htm
Also Check this blog and Notes for Alert Configuration..
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
SAP Notes: 870232,913858.
Regards
Anand -
Configuring Alert management (ALM)
Hi
I am planning to configure Alert management (ALM) for CCMS .Can anyone help me with the steps involved? I have gone through few posts in forums but its all abt configuring it in XI.I am thinking of solution manager as the Central ALM server. Is solution manager have any feature similar to Alert management so that I can use that instead of ALM?
Thanks in Advance
PrinceHi prince....
See these DOCS.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/28/83493b6b82e908e10000000a11402f/frameset.htm">Technical Infrastucture of Alert monitor</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/cb/df8a3eacd49076e10000000a114084/frameset.htm">solution montoring in solution manager</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/1a/40f83ee0e66856e10000000a114084/frameset.htm">MOnitoring with solution manager</a>
Regards,
vijay -
Errors while trying to configure alerts in Sol.Manager
Cannot find SAP documents detailing steps on how to configure alerts in
Sol.Manager, that will email an alert to us when a batch job fails in
our two Production systems.I don't think there is one document that will explain this.
Basically, you need to configure your sendmail through transaction SCOT (note 455140) and then you need to setup your autoreactions using CCMS_OnAlert_Email or CCMS_OnAlert_Email_V2 to send the emails based on a CCMS alert.
Lee -
Configuring alerts from PM server rather than workstations/servers
Hi, I was wondering if there was a way to configure alerts so that they were only sent from the PM server rather than the local host? At the moment we use SMTP which I'd like to re-configure it make this more secure. Are there any other optiosn that we could use? Regards,Al
Hello, I don't think it's possible or at least not without using external software. The F-Secure Management Agent (FSMA) runs on the endpoints and creates the alerts there, sending them to an SMTP server and/or PMS. However, there is or there was an "F-Secure Email Reporting VB Script" that uses F-Secure Policy Manager Web Reporting (PMWR) to create MHTML and then send that file via e-mail. Scheduling is based on Windows Scheduling. In more ancient times, there was something called "Policy Manager Reporting Option 5.50" which provided a command-line interface and you could have possibly scripted it. However, that was way before the transition from FSPM shared folder model to the H2 active database took place, so it is now a museum exhibit piece of software I think. Best Regards:Tamas Feher, 2F 2000, Hungary.
-
To configure alert for BPM scenario.
Hi Experts
I have one BPM scenario(Asyn-Syn-Asy).
I have created one alert category for this and defined 3 alert rules:
first rule from SAP to BPM
second from BPM to 3rd party which is synchronous
and third from BPM to SAP.
But when i create faulty message by mapping error, alert is not triggered.
Can anyone tell me where I m going wrong??
And what additional configuration is required to trigger alert??
Thanks
Edited by: danishahmed on Jan 18, 2012 2:06 PMHi Danish,
Control Step is required to capture exceptions. If there is any error in main branch then Integration Process looks for alternate branch to execute which in this case should be Control step.
This control step will throw alert which should already be defined in Alert Category of IR.
Steps -
1. Drag a BLOCK from tools pellete and assign to your main flow. Now this block will be having 2 branches.
One branch will contain main flow and other will contain control step.
2. Right Click on Block and Insert -> Exception Branch
3. Drag and Drop CONTROL inside exception branch
Now you can configure Alert as in above mentioned my EL Netweaver blog post.
- Mandeep Virk -
Hi All,
I want work on some alert sceanrios in XI. But it is not Configured in our system. I don't see anything in Alert Configuration & Alert Inbox of RWB.
What configuration needs to be done to enable the Alerts?
Can somebody please provide me some detailed configuration docs.
Thanks,
ChandravadanRef:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Maybe you are looking for
-
How do I cancel a download that won't go through....it's waiting
I am trying download music.....there is a problem with my credit card so it won't download...it is in a holding pattern trying to download. My laptop downloaded the music and used the same credit card. My iPad just won't give up. How do I cancel..
-
PXI system cannot be identified by the PC
PC doesn't see the PXI system. When I tried to install the service platform for chassis and controller ver 2.5. A message states that a higher version is already installed.
-
i have a 2tb time capsule wondering how to store a lot of my files and photos on it to free up some space on my hard drive on my iMac
-
Users getting access denied when trying to create a security group
Hello, I created an MPR for granting right through an approval workflow for joining security group, but getting the following error. Any thoughts what could be going wrong? Error processing your request: The operation was rejected because of access c
-
Icons do not stay arranged.
No matter how I arrange my icons in the main/first window of my hard drive, when I restart, they always return to this jumbled mess. This only happens on this one window. I already discovered a corrupt plist for another issue and am wondering if ther