Configuring button assignments for Jabber extensions

Hi,
I'm using a UC560 and configured jabber for some iPhones. To avoid confusion, I moved the old numbers from the employees' desk phones to their new Jabber devices and assigned new dn's to the desk phones. So when someone is calling an employee that uses Jabber, they still dial the old numbers and either the target iPhone rings, or the call is forwarded to the respective desk phone of the desired employee, when the Jabber extension isn't registered. (Call Forward Unregister)
I'm currently installing 500S extensions for some users and need to assign buttons for those Jabber extensions.
The problem is, that the button assigments are configured using the ephone-dns (e.g. button 5w598), but Jabber extensions don't have a ephone-dn, since they are configured via "voice register dn / pool".
So how do I assign those Jabber extensions to buttons on the phone/ 500S extension? (I guess I'll have to use floating extensions, if there now way to configure them directly...)
EDIT: I've just realised, that assigning the jabber extensions to the button would create another problem - the status LED of the button would be useless in case the employee is working using his desk phone. Are shared lines possible for jabber extensions? (As far as i remember, the "desk phone integration" feature is currently not available for CME).
Kind regards,
Rainhard

I don't get how this could not be considered a handy feature. In a company with teleworkers it's obvious that a receptionist needs to know who is available i.e. which jabber users are registered on the call manager. (Isn't a unregistered jabber user just the same as a disconnected phone?!)
Nevertheless, thank you for your answers!

Similar Messages

No OK Button For File Extension In Preferances! Help!

I have an external hard drive, which I put all of my media on. However, whenever I put a CD or download from the Itunes music store it doesnt save on this hard drive. I found a way to change where the files go for when I download or import through Itunes (Edit, Preferances) but there is no OK button at the bottom of the screen so the only thing I can do is X it out and it doesnt save any changes. Please help, my computer is too old, it holds 9 gigs, I can't save the music I listen to on it, so please help, thanks.

Hello,
please see the answer in
http://stackoverflow.com/questions/17757248/error-there-is-no-script-engine-for-file-extension-vbs-when-using-git-bash
"make sure that .vbs files have Microsoft Windows Based Script Host set as the current default program."
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Assignments for requisition screen

I am doing e-recruitment configuration. I have following doubts. Can you help me. I read the SAP help but it is not clear.
-- Questionnaire Ranking -- How do you configure this
-- In the Assignments Requisition screen, there is a column called Match. How is this configured. The reason is, if the candidate does not complete a questionnaire (red traffic light), the column show Five stars. I do not understand.

Hi Nicole,
Only a couple employees were affected. I agree about the search profile, but I know that my search profile fields are fine. What I found was that some employees who had never logged into the system (so who had never accepted the data privacy statement) were added to a requisition by a recruiter. There were a number of candidates in this scenario. In some cases, once added, their name would not appear on the 'Assignments for Requisition' screen. A blank line would appear in its place though. And if you clicked on the affected line and clicked the 'Activities' button, the subsequent window did contain their name. So something was preventing their name from being displayed only on the 'Assignments for Requisition' screen.
I have a feeling it could be authorizations-related, based on the user that triggered the creation of the candidate object, but I am not certain about this yet.
If anyone has ever seen this, your feedback is much appreciated.
Shane

Remote deployment switches for Jabber 9.2.2

Are there any installation switches for remote install via the MSI/DMG?
I will be pushing this backage via Dell KACE K1000 appliance and would like to configure default options for the users during the install/upgrade such as Disabling (or 'unchecked' following initial sign-on) the Docked Window, configuring Phone Accounts, WebEx Meeting and application Integration settings.

application integrations setting mostly get pushed out through the profiles on CUPS that get pushed out as soon as the user logs in.
I can't help you out with all the switches you asked for but, you can starting using:
msiexec.exe /i "\\lsrftufs1\ict\Networks\Voice\Jabber\Jabber 9.2.2\CiscoJabberSetup.msi" TYPE=CUP DOMAIN=somedomain.com.au LANGUAGE=1033
This will at least use auto discovery of the presence server if you use an SRV record _cup._login.somedomain.com.au
so at least your useers wont have to type in a presence server name or IP.
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

SSO For Jabber 10.5

Hi,
Has anyone Configured SSO for Jabber successfully with CUCM 10.5 Version.
I am getting following error after Exchanging Meta Data with ADFS Server.
Can anyone suggest further troubleshooting steps. Of if there is any detailed guide for SSO with jabber please advice.
Thanks

You may verify your configuration from the below guides. There are sample configurations.
Enable SAML SSO in Jabber Clients Configuration Example
http://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/118774-configure-jabber-00.html
AD FS Version 2.0 Setup for SAML SSO Configuration Example
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118771-configure-samlsso-00.html
Unified Communications Manager Version 10.5 SAML SSO Configuration Example
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-version-105/118770-configure-cucm-00.html
Unity Connection Version 10.5 SAML SSO Configuration Example
http://www.cisco.com/c/en/us/support/docs/unified-communications/unity-connection/118772-configure-ucxn-00.html
SAML SSO Setup with Kerberos Authentication Configuration Example
http://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/118773-configure-kerberos-00.html

Configuring Fact sheet for CRM 2007

Hi guys
Went through best prcatice B08 and configured necessary steps for my factsheet
Also checked previous topic discussions and found this subject header under this forum Configuring Fact sheet in IC CRM 2007 : Pls help
I did exactly as said, factsheet shows under my nav bar, but when i confirm BP and navigate to factheet. It is not showing default view which inlcudes Ibase, Email, Lead and so on
All I want to see is my master data marketing attributes, physical address and previous transactions of that BP
Please advice what to do or what Im missing
Thanks
Jogi

Hi,
In component BSP_DLC_FS and View factsheetyou can select the page type and once the Layout type is chosen, you can select your Fact sheet views from available Fact Sheet Views and there you can assign your views.I think you must have activated the fact sheet button for your PFCG Role.
I went to Component BSP_DLC_FS and clicked on display.
Went to views and selected BSP_DLC_FS/factsheet. Where exactly do I select the page types and layouts and my factsheet views? Still fairly new to the the BSP_WD_CMPWB so please excuse
Thanks Jogi

How to configure Time Capsule for Automatic Backup AND HARD DRIVE USE

I tried to configure Time Capsule for back up and as a hard drive. I record music and need to copy the music myself onto an external hard drive for speed, so I want the TC to double as an external hard drive, and do the back up. I want to be able to open the TC as a hard drive, to open my songs from it. Can it do both?

I finally figured it out. I am able to access my TC from the "shared folder." When I click on it, I get the "connection failed message." I failed to notice the login button in the upper right -- user error due to my Windows based education. The button is very subtle. Once I login, I can create folders and add content.
I didn't see a partition option. Where is that? Just curious.
Thanks!

Need to configure output type for adobe form

Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
Chandra

Hi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it.

Multiple Account Assignments for purchase/framework requisition

Hi,
Multiple Account Assignments for purchase/framework requisition:
The actual MM configuration is a single account assignment in the purchase requisition (although the option of multiple account assignments exist for trips). What are the implications at GR posting? Assuming that we could use the option for quantity and percentage distribution.
Regards
Suresh

Hi
Multiple account assignment:
Specifying Multiple Account Assignment
This procedure allows you to apportion the costs associated with a PR/PO item (among several cost centers, for example).
With multiple account assignment, the account assignment data entered takes the form of individual account assignment items.
Prerequisites
When specifying multiple account assignment for an item, you must consider the following points:
1.How is the net value of a PO item to be distributed (apportioned) among the individual account assignment items?
The costs can be allocated on a quantity or percentage basis (for example, 10 pieces or 10% of the order value to cost center 100).
2.How are the costs to be apportioned if only a part of the ordered quantity has been delivered and invoiced?
The partial invoice amount can be distributed proportionally, i.e. evenly, among the account assignment items of a purchase order.
The partial invoice amount can be distributed on a "progressive fill-up" basis, i.e. the invoiced amount is allocated to the individual account assignment items one after the other. Only when account assignment item 1 has been charged in full is item 2 charged; only when account assignment item 2 has been charged is item 3 charged, and so on. This process continues until the total invoice value of the PO item is reached.
Procedure
1.When entering an item, specify the account assignment category for the desired item on the item overview screen.
2.Choose Item -> Account assignments.
The account assignment window appears.
3.Enter the account assignment data for the first account assignment item.
Choose Change display to call up the multiple account assignment screen.
4.In the item fields (upper part of this screen) enter the relevant data:
Select the GR non-val. field to designate the GR for this item as non-valuated (as the item has been ordered for direct consumption).
In the Distribution field, specify whether the costs are to be apportioned on a quantity basis or by percentage.
In the Partial invoice field, specify whether the value of a partial invoice is to be allocated to individual account assignment items successively, whereby one is debited in full before a posting is made to another one (in which case, some account assignment items may not be debited at all as a result of a particular invoice), or whether the value of such a partial invoice is to be distributed among all account assignment items in equal portions.
5.For each account assignment item, enter either the quantity or the percentage of the total value to be charged to the relevant account assignment item.
To enter further items with the same account assignment data, choose Edit -> Repeat account assignment -> Switch on. The account assignment data will then be automatically adopted in the next item.
6.Repeat as necessary for other items.
7.Save the purchase order.
A vendor submits an invoice for 60% of the total order value. The cost of the ordered goods is to be divided equally among cost centers 1 - 5 (that is, 20% of the total cost is to be borne by each).
If you specified for the PO item that the value of a partial invoice is to be debited to the individual account assignment items on a "progressive fill-up" basis, cost centers 1 to 3 will each be debited with their full 20% share of the total cost on the basis of this partial invoice, whereas cost centers 4 and 5 will not be charged at all. (The latter two cost centers will not be debited until the remaining amount is invoiced.)
Regards
Ramakrishna

Failed to Configured Domain Services for Windows

Hi!
I am installing OES 2 SP3 with DSfW Pattern as a "New Domain Controller in an Existing Domain Services for Windows Domain" with Replication Configuration and Schema Partition.
During the "Perform eDirectory Configuration" at last task "Configure Domain Services for Windows " at 93% we encountered an error: "Failed to configure Domain Services for Windows".
Here's details of error ;
command : perl /opt/novell/xad/sbin/ndsdcinit.pl retry full-replica -d 'vec.apd.com.ph' -l 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'
-g 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph' -f 'apd.com.ph' -p 'apd.com.ph' -o 192.168.81.92 -t
Could not create gss directory /etc/opt/novell/xad/gss at /opt/novell/xad/sbin/ndsdcinit.pl line 463, line 652
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
SASL/GSS-SPNEGO authentication started
SASL SSF: 56
SASL installing layers
Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 503
at /opt/novell/xad/lib64/perl/Logger.pm line 119
Logger::_err('Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') called at /opt/novell/xad/lib64/perl/Logger.pm line 202
Logger::Log(0, 'Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 532
adc_install::decide_domain_zones() called at /opt/novell/xad/lib64/perl/install/adc_install.pm line 150
adc_install::stage_domain('adc_install=HASH (0X8b9370)') called at /opt/novell/xad/sbin/ndsdcinit.pl line 1383
main::main(62, 'apd.com.ph', 'vvec.apd.com.ph', 'TRUE','ou=OESSystemObjects,dc=vec,dc=apd,dc=com,d c=ph','ADM_PASSWD_DOMAIN','ou=OESSystemObjects,dc= vec,dc=apd,dc=com,dc=ph','replops::DESTROY',
'APD.COM.PH',...) called at /opt/novell/xad/sbin/ndsdcinit.pl line 1301
main::main() called at /opt/novell/xad/sbin/ndsdcinit.pl line 1425
ENV PATH = /opt/novell/xad/sbin:/opt/novell/xad/bin:/opt/novell/xad/share/dcinit:/opt/novell/eDirectory/bin:
LIB=lib64
LD LIBRARY PATH =
/opt/novell/xad/lib64:/opt/novell/xad/lib64/nds-
modules:/opt/novell/eDirectory/lib64:/opt/novell/eDirectory/lib64/nds-modules
SASL PATH = /opt/novell/xad/lib64/sasl2
DCINIT CONFIG: /etc/opt/novell/xad/xad.ini
DOMAIN NAME: vec.apd.com.ph
PARENT NAME: apd.com.ph
FOREST NAME: apd.com.ph
NETBIOS NAME: VEC
Any ideas on this error ?
Regards. Thanks.
denzmo

Thanks for the reply.
I have some followup questions
2. Can you explain the DNS setting in your setup ?
Tree ---> Power--> apd.com.ph -- dlpc.apd.com.ph
-- vec.apd.com.ph -- Andromeda.vec.apd.com.ph (DNS)
-- Pictor.vec.apd.com.ph ( additional domain server ) -> "Failed to configure in DSFW"
1. apd.com.ph, dlpc.apd.com.ph, vec.apd.com.ph are DSfW domains or just DNS domains ?
2. Andromeda.vec.apd.com.ph (DNS) - is this the DC of a DSfW domain ?
3. You are adding the Additional domain controller to the vec.apd.com.ph domain right ?
The
# LDAPCONF=/etc/opt/novell/xad/openldap/ldap.conf /usr/bin/ldapsearch -Y EXTERNAL -s sub -b dc=ph "(objectclass=dniplocator)" dn
Heres the result ;
a.) running the command in the DNS server (child domain) ANDROMEDA;
SASL /EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0, cn=peercred,cn=external,cn=auth
SASL SSF: 0
# extended LDIF
# LDAPv3
# base <dc=ph(objectclass=dniplocator) [email protected]> with scope subtree
# filter: (objectclass=*)
# requesting:ALL
# search result
search : 2
result : 32 No such object
text : NDS error : no such entry (-601)
# numResponses :1
This is strange. This ldapsearch is failing to find the locator object in the tree under dc=ph.
- Can you try this same command from your FRD DC too and find the result ?
- Is your server non-name mapped or your adding a DSfW server into an existing eDirectory tree (name mapped) ?
- If it is later can you try the same search with '-b' parameter replaced with container to which FRD is mapped to into the eDirectory Tree.
- Can you tell in your setup where are the locator object present for your first DSfW server which is acting as DNS server ?
- While installing this ADC server, you have given the remote dns server as 192.168.81.92. In the YaST DNS screen did you do retrieve (by clicking 'retrieve' button on the screen ) or you entered those inputs manually ?
- Another follow up question. The locator context provided to the ndsdcinit command in your first post, is 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'. Can you confirm your locator
context is correct ?
[/QUOTE]
b.) running the command in the ADC PICTOR;
SASL /EXTERNAL authentication started
ldap_sasl_interactive_bind_s: invalid credentials (49)
[/QUOTE]
This is expected as the server is not completely configured.
Please get it touch with our NTS for passing on more information about this setup.

Auto Create lines without clicking configurator button

Hi All,
Is there anyway to create related items automatically if a model item is entered in sales order form with out clicking configurator button.
Thanks
Kranthi

Hello Kranthi,
Once you book the order, the order line should go to “Booked” status in case of an ATO environment. If you will do a Progress Order Place Cursor on the configured item line.
Actions -> Progress Order -> Ok. Select Create Supply Order-Eligible Press Ok.
This will Create the star part number (Configuration Item), if your BOM, routings have already been defined for the model part.
Regards,
Jyoti Ranjan Mohanty

CUCM 7.1 FAC for registered extension

Hello experts,
I have been requested to configured FAC (Forced Autorization Code) even for calls between CUCM registered extensions. This feature works just fine when dealing with extenal route-patterns but I have not found a way to make it work for internal extensions. Could you please instruct me how to accomplish this?
Best Regards and thanks in advance.

Hi Chris,
Well that´s the same question I asked, the only reason they gave is that they want the user assigned to an extension be the only one able to use it to whatever destination. I suggested CMC (even though I believe it does not work for internal extension either) but they want to force a code to be entered also for internal calls. Is there a workaround maybe with authentication to lock the phone.
Best Regards,
Roberto.

What roles assignments for Rights Management?

System: Adobe LiveCycle Server ES3 system.
Question and Issue: I need to create a user that is able to manage the settings via the web administrator (adminui) for:
1. Policies
2. Documents
3. Events
4. Watermarks
However this user must not have the abiltiy to change the server configuration, key management, etc that is most of the stuff in the "LiveCycle Rights Management->Configuration" page except for "Watermarks".
I had assigned this user the following Role Assignments:
1. Rights Management Policy Set Administrator
2. Rights Management Invite User
3. Rights Management End User
4. Rights Management Manage Invited and Local Users
The above lists works for most part except this user is unable to configure/manage the Watermarks. The ability to configure/manage Watermarks is critical in our scenario.
I found that by assigning this user the "Rights Management Super Administrator" role, it would allow this user the "Watermark" capability; however it also allows the user other capabilities that we do not want the user to manage/configure. I believe the "Rights Manage Configuration" permission gives this role the ability to configure all aspects of the Rights Management.
So is there a permission that just allows the user the ability to configure just the "Watermark"? Is this configuration even possible?
Regards,
TS

Watermark is in the Configuration part of RM UI so as per current implementation there is no such role defined by which an user can configure the Watermark only.
It is designed as such because only an administrator can change such configuration and create or modify Watermark.

Configuring Commit driver for IPM 11g in ODC

Hi,
I am trying to configure the commit driver for a commit profile.
I have selected the Oracle I\PM 11g Commit Driver and clicked on configure button,
As I click on configure button, it pops up an error message saying:
Run Time Error '40009' :*
The following error occured configuring the commit driver.*
Error Number: - 2147024773*
Error Description: Automation error*
The filemane, directory name, or volume label syntax is incorrect.*
Could some one help me on this, Am I missing any configuration or files?
Regards
Sri

Hi,
I have 64 bit JVM installed on my Machine which is default JVM on my machine.
As 64 bit is required by other programs, I dont want to delete that.
Can I install 32 bit JVM separately and point my ODDC to 32 bit JVM. If yes, could you please tell me how to do that?
pointers to any documentation around that is fine.
Regards
Sri

Back button focusing for 5d Mark III. How do I set it up?

How do I set up Back Button focusing on my new 5D Mark III. Can't find instructions in Canon supplied manual or third-party book.
Solved!
Go to Solution.

It's really easy because it's mostly already set up... The AF-On button on the back of the camera already starts and stops AF.
To set up true BBF technique, you turn off the AF function at the shutter button. I believe it's Custom Function IV, 1: Opertaion/Others.... where you make button assignments. Navigate to the shutter button icon and press "set" to enter the options for that... change to the center one "metering start" and press "set" again. Done.
Optionally you can swap the function of the AF-On and "*" (AE Lock) buttons, using the same button assignment tool.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM

Configuring button assignments for Jabber extensions

Similar Messages

Maybe you are looking for