Configuring multiple spool reciepients in CPS for a job?

HI
Can anyone help me
How can i configure multiple spool recipients for a particular job in CPS?
Is this possible?
Kindly please guide me how to configure.

Hi Ram
Thanks for your solution.Its working fine.
We have created a shared distribution list in the end system and we have used that name while defining the spool recipient list in CPS
Thanks
Arun

Similar Messages

Multiple Spool Requests for BACS Payment

Hi,
We are running payment program F110 for BACS payment.
When we run F110 in production system, irrespective of no. of. vendors or payment line items, only one spool request is generated.
But when we run F110 in quality system, multiple spool requests are generated for single payment run.
please give your valuable suggestions, why this is happening like this?
Regards,
Praisty

Dear,
please check the prnitout/data medium variant which you selected during the payment run.
Regards,
Panneer

Multiple IT1005 for one job

Can we have multiple planned compensation (IT1005) records for one job within the same country? The standard SAP has the time constraint as "3" for IT1005 and that means that it can have multiple records with the same dates. We want to use different pay structures for various positions attached to the same job. How is it going to affect the sub-modules in ECM like Job Pricing where the Job Evaluation/Survey are going to be used based on the same jobs/planned comp records.
What is the best practice in this regard, generally in US and other countries?

Hi,
Yes you can use.
Regards,
Kapil

How to create the multiple spool requests for a single report.

Hi gurus,
I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
And one more question is can we create a spool request for a report which is running in online.
waiting for inputs frm gurus.

Hello,
As per my knowledge for creating new spool id you will have to set
output_options-tdnewid = 'X'.
and then using
job_output_info-spoolids
create a pdf using
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Rachana.

How to configure multiple listeners to listen for the same instance.

Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.

Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners

How to i configure multiple JBoss caches for standard lone application

how to i configure multiple JBoss caches for standard long application running on single JVM..Please advice and provide me sample code if any..
Thanks
NAgs

[http://www.jboss.org]
Locking this thread.

[PAP2] Configuring Multiple Service Providers for Outgoing Calls

I'm trying to configure my PAP2 with Gizmo project (for incoming calls) and VOIPCheap (for outgoing calls).
I tried to use the dialplan:
(xx.<:@voipcheap.host.xxx:5060; usr=myvoipcheapuserid; pwd=myvoipcheappassword; >)
But this doesn't seem to work. But when I configure the line for the VOIPCheap provider, then I am able to make calls through that account.
Can someone help me configure my PAP2 adapter please?
Thank you very much in advance.
Sekhar.

I shall have found this post a bit earlier... sik!
I have 2 PAP2T 'listenning' to 3 different providers (1 is common); that works... but to be optimal, both ATAs should allow using a 4th provider for outgoing calls.
The ATA administration guide shows an example of a dial plan such as <8,:1408>xxxxxxx<:@pstn.Linksys.com:5061;usr=joe;pwd=joe_pwd;nat>
Unfortunately, it applies for AG310 and SPA3102...
VoIP_Addict, I guess that if you did find some time to 'play' with this, you can only confirm what has been said in this post, right?

Is it possible to have Multiple Spool requests in one batch job overview?

Hi,
While running one of my z program in back ground, there are two spools generated (one by write statement and one by OPEN_FORM statement and both the spools are available in SP01 Transaction), but when i see the job overview in transaction SM37, I only see one spool request (that of the last spool request). Can any body in the group please tell me is it possible to see multiple spool requests in the job overview of one Abap program and if yes, how?
Thank you.
Abinash

Hi Jayanthi,
Thank you for the link. But probably that discussion was also an unsolved one.
Anyway, does any one in the group think that display of multiple spools per one step job is dependent on client / SAP Server setting? Because as evident from the chain of mails in the link provided by Jayanthi, some people say that they see multiple spool requests for one program in batch mode job overview (SM37)? If yes, can some body tell me the required configuration?

How to configure multiple IP-Adresses on one NIC in OVM

Hi guys,
we have some OVM Servers 2.2.1 installed. They all have three NICs in them (eth0-2). For eth0 and eth2 we need multiple IP-Adresses configured to work with our storage solution. The configuration should look like this:
eth0:0 - 192.168.31.x
eth0:1 - 192.168.33.x
eth1 - 192.168.0.x
eth2:0 - 192.168.32.x
eth2:1 - 192.168.34.x
I tried creating gonfig files ifcfg-eth0:0 in /etc/sysconfig/network-scripts with the following content
DEVICE=eth0:0
BOOTPROTO=static
ONBOOT=yes
NETMASK=255.255.255.0
IPADDR=192.168.31.3
TYPE=Ethernet
HWADDR=00:1b:21:06:f0:fa
But it does not work. Neither eth0:0 nore an additional xenbr is configured when i restart.
I can configure multiple ip addresses for xenbr0 by calling something like "ifconfig xenbr0 192.168.31.x". But these settings get lost as sonn as i reboot the server.
I have already searched google, forums and blogs for a solution but could not find one. I thought that this should be a pretty common task. In "normal" linux it is not an issue at all.
Has somebody any experience with a setup like this? I would really apreciate your help.
Thanks
Marek

Hi,
configuring IP aliasses seems to work the same way like configuring VLANs. You will have to configure the appropriate bridges at system startup manually.
E.g. this little script is what I use to configure VLANs and briges on my OVM:
#!/bin/bash
echo "Configuring VLANs and bridges\n"
echo "Configuring VLAN 24 on eth2"
vconfig add eth2 24
brctl addbr br2.24
brctl addif br2.24 eth2.24
ifconfig eth2.24 up
ifconfig br2.24 up
echo "Configuring VLAN 31 on eth2"
vconfig add eth2 31
brctl addbr br2.31
brctl addif br2.31 eth2.31
ifconfig eth2.31 up
ifconfig br2.31 up
This script is run at startup by init using this startup skript in /etc/init.d, which is what I think you're missing as you can already seem to bring up the needed IPs manually - you'd have to change the chkconfig accordingly, that is make sure that the config script gets startet after the network has been brought up, like this: # chkconfig: 2345 11 91
[root@oraclevm01 ~]# cat /etc/init.d/vlan-config
#! /bin/bash
# vlan-config configure VLANs
# chkconfig: 2345 11 89
# description: Configures VLANs at boot time before the \
# network is started.
### BEGIN INIT INFO
# Provides: $vlan
### END INIT INFO
# Source function library.
. /etc/init.d/functions
if [ ! -f /etc/vlan-config ]; then
exit 0
fi
# See how we were called.
case $1 in
     start)
               # configure vlans
               /etc/vlan-config
          echo $"Usage: $0 {start}"
          exit 1
esac
exit 0
Hth,
budy
Edited by: budachst on Jun 29, 2011 8:11 AM

How to configure multiple IP addresses on one NIC?

Hi,
I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
So any advice is well appreciated.
Thanks!
Regards,
Marek Hubatka

You should be able to do this by using "VLAN Groups".
http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces.

Issue in SAP CPS for Job Interception

Issue in SAP CPS for Job Interception
Scenario:
After triggering a Process Chain in BW and maintaining the Job Interception settings in SAPCPS(Redwood)
(so that any job which triggers in BW by that Particular User is intercepted and not let it proceed further until the job is released in SAP CPS.)
Issue:
The Jobs are getting into Waiting status in SAP CPS(Redwood) even though there is no progress in loads in BW side. Also the Jobs are in Intercepted state even after releasing the Parent Job in SAP CPS(Redwood).
Please let us know how to go about it.

Hi Ramesh,
What you plan to do is called monitoring of process chains (ie. process chains not started from CPS) and this should be available in the latest version of CPS.
This requires the interception of only the BI_PROCESS_TRIGGER process, just as you have configured now, and other than that the following prerequisites:
SAP Note 1080558 describes the SP levels for the BW/BI releases
XBP 2.0 or higher
Redwood transport files must be loaded
ProcessServerService.SAP.XBPVariant license key
Maybe this helps,
Anton.

How To Send Multiple Spool Lists from a Single Step in SM37

We have converted all of our output reports to ALV and now instead of one big spool that contains all the reports generated in a single step we now have multiple spools. We run the program as a Batch Job in SM37 and have created an entry in the SPOOL LIST RECIPIENT for the job. The problem is that it only sends one of our lists. Is there a way to make it send all of the ists?

You need to write areport program with fm 'RSPO_RETURN_ABAP_SPOOLJOB' and collect all spools and send it and make this as precedent job after your ALV spool jobs
a®

How to configure multiple clusters on the same machine.

I am attempting to configure multiple clusters on the same set of machines. I have set the cluster name and multicase IP addresses to be different for each cluster. However I am still getting and error that states:
"This indicates that there are multiple clusters on this network attempting to use overlapping network configurations."
Is this not possible? If it is possible, is there some further way i need to tell the VMs they are part of different clusters?
Thanks,
Jacob

FYI: I'm using the wrong multicast IP above. 224.0.0.1 is reserved and something else should be used. See:
Re: UDP flood hosed my LAN?

How to configure multiple listeners

Hi All,
I have installed 2 different Oracle instances on a single machine. I found that each oracle installation created its own Listener. I cant start both of the listeners at the same time. As a result, the respective applications cant talk to their corresponding database instances.
I could start only one listener for one database instance at any given point of time. Therefore, I am unable to use the other application.
Can any one please help me in configuring this appropriately so that both the applications can talk to their respective databases?
Waiting for your kind replies.
Regards,
Syed

Syed Abdul Rahman wrote:
Hi All,
I have installed 2 different Oracle instances on a single machine. I found that each oracle installation created its own Listener. I cant start both of the listeners at the same time. As a result, the respective applications cant talk to their corresponding database instances.
I could start only one listener for one database instance at any given point of time. Therefore, I am unable to use the other application.
Can any one please help me in configuring this appropriately so that both the applications can talk to their respective databases?
Waiting for your kind replies.
Regards,
Syedit's better to configure a single listener . Configuring multiple listener will increased system resource usage. Multiple listener may be helpful in case of RAC .
--neeraj

How to Configure Multiple Purchase Requisitions per Service Order

Hi experts!
Sorry if this is in the wrong spot, but I was wondering how I can configure multiple Purchase Requisitions to be created from a service or maintenance order (IW31) based on the control key (or if it's even possible).
What would be the pros and cons of doing this? We currently only have one PR being created for one order (a 1-to-1 relationship), however now with implementing external services, we want 2 or more PRs created based on the control key. Is the control key the best way to go, or should I be looking at a different deciding field?
Thanks in advance!
Stephanie

Raj,
Thank you so much for the information. That does help! However business requirements are now changing to have different Purchase Requisitions created for a single order in the following scenarios:
             - New Purchase Req created for different operations (you explained how above, perfect!)
             - Seperate Purchase Req created for non-stock items (your answer above seems to group service operations and non-stock into the same Purchase Req).
             - New Purchase Req created if the order has already been released. (If the order's status is still at "Create", then the additional component can be appended to the existing Purchase Req. If the order's status is "Released", and a new component is added, a new Purchase Req is created).
As mentioned, you explained how to do the first requirement. Is there anyway SAP can handle the next two requirements using standard config and not customizing anything?
Thanks in advance!
Steph

Configuring multiple spool reciepients in CPS for a job?

Similar Messages

Maybe you are looking for