Configuring titlebar info order

I'm searching for a way to switch titlebar-information in x11-windows from "document title - application name" the other way round: "application name - document title". I'm using xfce right now, but the default seems to be the same in gnome as well. Where is this set? Xorg? Window Manager? Couldn't find anything useful with google...
Thx for any hints,
Martin
Last edited by gnidam (2007-04-12 14:49:40)

Ah, thx for clarifying... i thought that's two strings put together by x11 or wm. So this (doc title - app name) is some kind of (defacto-?) standard, right? Funny, as i feel irritated about the order everytime i look at the titlebar. Just a cosmetic issue though.
Last edited by gnidam (2007-04-12 16:37:45)

Similar Messages

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

Production Order : OUTPUT Type Configuration for Production Order as EDI

Dear SDN All ,
OUTPUT Type Configuration for Production Order.
Doubt in third Point
We have found the IDoc " LOIPRO01 " for Production Order
(Please confirm that this IDoc can be used for outbound IDoc for Production Order)
And foloowing
1. Defining the Output Type for Particular Application.
 T-Code: NACE
A. Output type have created upder application "ME" description : "Inventory Management"
B. " ZEDI " created for getting output as EDI type
 ZEDI is copied from "WF01" output type. and
 Transmision mediam as "EDI"
 Program : RSNASTED
 Form Routine : EDI_PROCESSING
 (Please confirm is this for IDoc creation)
2. Partner profile creation:
A. Partner profile created under logical system and
B. and In outbound parameter declared as "LOIPRO"(This is for sending the IDoc "LOIPRO01" to XI system).
3. Customization for output type for Proction Order -- (For CO02,CO08) ---
 A. But only one functional customization is remaining to do, for getting the IDoc while saving the Production Order in T-Code "CO02" and "CO08"
 For Example:
 in sales order transaction va02 (in DBI 450 client) and select any Sales order.
 & select following menu path.
 Extras --- > Output -
> Header -
> output
 Here we can set our output type "that U defined in NACE Transaction-Code"
 Like the same way I want to set output type for CO02, CO08 transaction.
But I couldn't find the menu Item in Co02 and Co08 for setting the output.(like VA03)
Please help me out for setting the output type for Production Order Creation.
Thanks in advance,
Dhanabal T
Message was edited by: Dhanabal T

Hello.
I have a similar requirement. Did you guys find the solution?

Order Management Implementation - Configurator and Move Orders

We are in the process of implementing Order Management (11i) version. We have been facing the following issues:
a. Configurator button on order lines form does not open for PTO models - we are not using the Oracle configurator, but are interested in manually choosing the options during Order entry - the form does not open, despite the fact that we have set up the profile,BOM:Configurator URL of UI Manager, as per the suggestions of Oracle.
b. Issues around using Workflow for Move orders - basically, suggested set ups in Organization parameters have been done, but do not see specifically that the workflow process has been started, when saving a move order.
Does any one been successful in getting through either of the issues - any input is highly appreciated.
null

we did face the same problem whes the configurator button was pressed nothing opened up. We applied patch set B and that took care of the problem.We are going to use Oracle Configurator and not BOM bit do have configurator developer installed yet, so are creatinf bills in BOM and selecting the model to order through the sales order screen and choosing the options etc by clicking on the configurator button.The order gets saved but does not gets over to receivables as the workflow process that needs to be run(as per oracle) does not seem to be doing anything at all. There are so many bugs especially in OM that it would take sometime for it to stablize.
Let me know if you need to the specific things that we did to make the configurator screen to appear.

Material Variant configuration in sales order line item from Ztable

Hello Experts,
we have configurable material and and creating sales order. from sales order line item if we goto configuration we can maintain variant configurations. My requirement is that when i click on configuration after selecting a line item i need to check ztable where i have material no and and relable text. if an entry exists i have to populate this relable text in one of the configuration filed. Can any one help how can i read and update configuration in sales order level and where to do this coding so that when i click on configuration the value from ztable populated in a field.
Many thanks in advance.

Hi Senthil,
It is simple.
When you create a characteristic which should have the value maintained in the Z table, go to the tab values. Here you have a push button called "Other Value check". Here you click this button and select the function module option. Now, in the window, you will have a place where you can mention the name of teh function module.
You create a function module with the help of your developer to find out the text maintained in the Z table using teh rules you have in your mind and update that logic in the characteristic. In the earlier screen, you just have to mention the name of the function module, thats all, your work is done.
Now when you configure, for this characteristic, the value will be automatically determined using teh function module. You have to create such characteristics as "Not ready for input" ones in additional data for which you cannot enter values manually.
Hope this helps.

How to configure third party order ?

how to configure third party order ? and how the business know that the customer has received the goods so that invoice to be raised?

hi shoban,
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1) After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
step 2)
the item category in the order should be manually changed as TAS.
For that you need to confugure the item category determination
ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
OR + NORM + + = TAN . + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevnat for billing indicator as F
step 4)
The schedule line cateogry for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
Hope it helps
Mastan

BAPI to bring TAX INFO, ORDER HISTORY and PAYMENT DETAILS of a PO ??

Hi All,
Is there any BAPI that brings
TAX INFO
ORDER HISTORY and
PAYMENT DETAILS of a PO ?
Please let me know.
Thnx.
Regards,
Nandha

Hi,
The BAPI exports all details required however I am not sure whether this exports payment details as well. Kindly let me know if this exports payment details or is there any other BAPI that provide these details.
Thnx.

How will i configure stock transport order

how will i configure stock transport order...

Hi,
sto dividw into two type
STO with sd
STO with out SD
1) STO with out sd
here STO divide in two steps
1) tranfer the good one storage location to another storgae location
go to the tCODE MB1B , GIVE the movement type 301, give the plant ,storage location, and recevied storage location
go to the mb1b , give the movement 303, give thesuppling plant
then give the reciing plant
save then go to the mb1b then give the movement type 305
thanks
please reqrd

Configuration for Sales Order Tabs

Hi Gurus,
              I want to configure the sales order screens in such a way that the end user must be restricted to view the tabs such as say for example Partner Functions tabs?
How to do the above configuration?
regards,
Sarosh

hi,
To make optional / mandatory you can use in IMG - S&D-> Basic > Functions-> Log of incomplete Procedures => select the fields > from the tables and the system will check for them (OVA2/VUA2)
To make a filed entry enabled or grey (non-entry allowed):
User exits in the program MV45AFZZ-USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP.
If a field has no field name, it cannot be allocated to a group. The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit. This FORM routine is called up by the module FELDAUSWAHL.
Actually suppressing fielding sales orders userwise is quite easy. We are doing it in our company. For this we use userexit FORM USEREXIT_FIELD_MODIFICATION in MV45AFZZ.
Below is the sample code
IF SCREEN-NAME = 'VBKD-ABSSC'.
AUTHORITY-CHECK OBJECT 'ZMV45AFZZ' ID 'SCRFNAME' FIELD SCREEN-NAME.
IF sy-subrc = 0.
    SCREEN-INPUT = 1.
else.
    SCREEN-INPUT = 0.
ENDIF.
endif.
You place the authority check object in authorization profile in the role of the users, who should have access to the field (in this case it is VBKD-ABSSC), and there assign the corresponding fields that are to be accessed via this userexit.
pls reward points if the answer is helpful
REgards,
Murali
Message was edited by:
        murali reddy

Configure Memory Info service in Visual Administrator

Hello All,
I need to configure Memory Info service in Visual Administrator.
I am looking for a service/tool which will give me a summary of used/free and total memory in portal.
Ive read a little about Memory Info service and i think this will help me fulfill my requirement.
1. If you know of any other tool which will help me in my requirement, please give details.
2. Please guide me to configure Memory Info Service in Visual Admin. Currently its appears as its not configured. When I right click on it, the Start and Stop commands in the context menu are disabled.
Awaiting Reply.
Regards,
Ritu

Hello Detlev,
In the Visual Administrator, there are few services like:
1.Memory Info - The context menu for Start / Stop is greyed out.
How can I start this service?
Referring to your reply above, could you please be little more explicit.
2. Message Info - enabled.
3. Monitoring - enabled.
Awaiting Reply.
Regards,
Ritu

ITEM DETAILS: CONFIGURATION in sales order

Dear guru,
In the sale order if we want to see the variant configuration details for a particular line item then after selecting the line item we press
the ITEM DETAILS: CONFIGURATION icon. Once we press this icon then the system will take us to a display characteristic value screen where we
can see the configuration details of that particular line item. But now in PRODUCTION SYSTEM we are not finding any value for a variant
configuration material in the sale order display characteristic value screen, eventhough it is maintained in the material master MRP3 view.
But in deveploment client it is showing correctly.
Pl. suggest

Get with the VC person and have them move all the model details to PRD

PTP - Change to stock type field status configuration in Purchase Order

When creating or changing a PO for direct material - or even during goods receipt, the stock type field which by default is "X - Quality Inspection" can be changed to "Unrestricted Use" by the purchasing personnel. This is not in line with QA requirements where the change from QI to Unrestricted use can only be done by QA personnel.
Need to configure the system not to allow purchasing personnel to change the status.
Please tell me where i need to configure the above requirement.
Regards
Sreekanth

HI,
You will need to change screen layout at document level in ME21N and ME22N. Follow below steps
SPRO -> Mateial Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document levle -> ME21N -> Look for Quality Inspection (I believe this is the field, I did not test it) and make it Display only. By default it comes as Optional entry.
Regards,

Configuration of Purchase order to send thro' MAIL

Dear Experts,
Please let me know the configuration process of Purchase order to send the same thro' EMAIL.
Regards,
B.Sudharsan

Hi
You need to do some configuration for this.
Goto NACE .
Select EF and click on OUTPUT TYPES.
Then select Output Type NEU and click on processing routines .
In that you have to add a new entry - medium 5 .
Then you need to assign a program, form routine and form.
You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as
TEXT_SYMBOL_REPLACE .
Now the subject will be PO No. 1800004202.
You need to maintain your email id in tcode SU01 and also the vendor's email id.
Now while creating a new purchase order , change the medium to External Send .
Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
Goto tcode ME9F .
Execute.
Select the checkbox and click on Output Message.
You will get a message MAII 00000000000001 generated .
If the BASIS guys have made the necessary configuration for sending mail then the mail will go .
You can see the status and what is sent via tcode SOST.
Hope it helps
Best Regards

NACE Configuration for Purchase order output "Title Text"

Hello Gurus,
I have a small question, Is it possible to make dynamic Document title when sending purchase order email to vendor.
I have checked configuration in NACE where for each output type where you can maintain "Mail title and Texts". For example if your output type is Email then you can maintain document title text as "Purchase order Email".
Our requirement is to put purchase order name in document title i.e. when vendor receive email in their inbox it says purchase order number.
Please advise.
Thank you
Ritesh

Thanks Jurgen. This note helped us.
Best Regards
Ritesh

Configuration for Process order for Forms

Hi,
I want to develop a layout for Process Order.
Where we will do configure Print Program & Layout for Process Order like
what we do in NACE for SD&MM related layouts!
Will this Process Order supports both SAP Script & SMART Forms!
Can anybody clarify!
Thanks,
Deep.

Hi ,
In Process order transaction ,in output options declare the form name and output type. In TNAPR table in SE11 create on row with the above o/p type and form name. I think both forms will be possible.
Actually where ever script form possible means there you can create smartform also.
Thanks.
Suma.

Configuring titlebar info order

Similar Messages

Maybe you are looking for