Configuring TREX for sld

hello to all.
Why do i need to do the post installtion of the trex ""Configuring TREX" for sld"?
I have to do it?
Thanks
Menashe

If you are installing any component of 'NetWeaver', you should register it with Central SLD server of your landscape.
Same case with Trex too, that's why you have that post installation step there. However, it is not a 'Mandatory' step which needs to be done immediately after installation. But in future, you might require this. So you may proceed to do it after proper understanding of what is an 'SLD' even !
This step itself tells it's purpose as seen from below help page
http://help.sap.com/saphelp_nwpi711/helpdata/en/42/e33ae230ba3ee2e10000000a1553f6/content.htm
Following link will help you in understanding the SLD
https://www.sdn.sap.com/irj/sdn/nw-sld

Similar Messages

  • Configuring TREX for CCM 2.0

    Hi,
    We are using SRM 5.0 and CCM 2.0, after creating supplier,master and procurement catalog, and while publishing procurement catalog we realized we have not configured trex, so kindly let us know how to do the same along with anyother details you think will help us in doing the same.
    In our case, SRM and CCM are in the same server.
    Let me know how to configure it in case both were in different server.

    Hi,
       Some related links which might be helpful.
    sizing SRM 5.0 SLD with XI - hardware
    Re: CCM integration with EBP
    BR,
    Disha.
    Pls reward points for helpful answers.

  • Configuring trex for sap dms

    Hi,
    We have installed SAP DMS (ECC6.0) to manage some of our documentation. Now we are trying to configure TREX to index and search for those documents, which are stored inside the SAP Content Server. Right now we have the entire technical configuration completed, but we cannot find any documentation that explain us how to go through the rest of the process... We don't know what transactions to call or tables to maintain in order to configure indexes and search functionality. Please note that we use transaction CV04N to search for documents.
    Can anyone please provide me information on how to configure TREX?
    Thank you.
    Kind regards,
    Ricardo Inácio

    I am facing the same problem: I need some documentation on how to use TREX search in CV04N.
    There must be some docs, but I cannot find them.
    Thanks in advance
    Andy

  • Authorization error while configuring  TREX for HR - talent search

    Hi All
    HR team is performing  talent search configuration and they are using Tcode ESH_Cockpit. Here while creating, they  get this error "Error while preparing".
    For one of the failed connectors (eg: HRTMC AES Documents), job log is as given below:
    24.10.2011 08:34:16 Job started
    24.10.2011 08:34:16 Step 001 started (program ESH_SE_CONNECTOR_MOD_BGD, variant &0000000000027, user ID T710752)
    24.10.2011 08:34:50 Authorization check CP_USER_ALL:
    24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
    24.10.2011 08:34:50 Authorization check CP_USER_ALL:
    24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
    24.10.2011 08:34:50 Authorization check CP_USER_ALL:
    24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
    24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
    24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
    24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
    24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
    24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
    Here they have SAP_ALL assigned and even then they are getting above authorization related error . 
    Your advise will be really helpful. Thanks in advance for your help.
    Regards,
    Aditya

    TREX also uses gateway programs.
    Check with your basis folks or tcode SMGW (go to --> expert functions --> external security) to see whether it is restricted.
    There are also some SAP notes about this...
    Cheers,
    Julius

  • Configuring TREX for HCM Talent management functionality using Nakisa

    Hi,
    We are configuring the Talent Management functionality in ECC-HR system.We have installed TREX 7.1 patch number 36 and Nakisa.
    We are using the 'embedded search' functionality.
    Now, also and are trying to create indexes using the Administration cockpit (tcode ESH_COCKPIT).
    However we are getting the error 'System DHS, client 100: A connection already exists' while creating a 'search connector' in the cockpit.
    Also, we are getting the below log error in the system in SM21:
    ''TREX_ICM - Send_Error; return code = 112, return text =HTTPIO_PLG_ICM_CONNECT_FAILED-Fehle''
    Kindly let us know what should be done.
    Thanks & Regards,
    Kunal.

    Hi,
    Now the initial error we were getting is resolved by applying one note suggested by SAP OSS.
    However, now we have another issue, while creating indexes using tcode ESH_COCKPIT in the backend system.
    We get error when we try to go to tcode TREXADMIN --> TREX
    ABAP Customizing --> 'Net Performance'.
    It gives the error below:
    ERROR
    Remote communication failure with partner http://:33003/ICMConnectTest
    HTTP Status 507: Kernel error:ICM_HTTP_CONNECTION_FAILED (400 )
    Kindly let us know why we get the error because even while recreating
    the indexes we get similar error i.e. Remote communication failure with
    partner http://cca1cs0872:33003/asxml/multiIndexCellTable
    The icm timeout parameter is sufficiently large i.e. around 30 minutes.
    Also, the RFC (TREX_DHS) from ECC-HR system to the TREX is working fine.
    Thanks & Regards,
    Kunal.

  • Error CIM_ERR_FAILED - Configure the integration server for sld

    Hi,
    I´m running the Configuration Wizard SLD in "PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage". In step 33/142 Configure the integration server for sld, I got following error:
    Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
    Someone help me?
    Regards,

    The version is 7.0. I skip this step and finished with sucess. No run the step:
    PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage  Cancelled
    PI_01_This template checks if the necessary services are started                                         Cancelled
    PI_05_This wizard will configure the integration server for sld                                                 Incompletely executed
    These steps are with the same error.
    Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement

  • Reg : Initial configuration for SLD

    HI all ,
    In the netweaver administration portal we have a option for deploy and change .when we click on that we have some options for initial configuration.Now the doubt that i have is that we have installed netweaver java stack on a server .We have configured local sld on that .We want to connect to a seperate ECC 6.0 system.That system doesnt have a sld configured for it .So we want to bring that system into our sld.I have configured NWA_01 i.e .configuration for local sld and NWA_03 i.e. create a connection to the SLD and Setting required authorizations for SLD (CIM client settings) in netweaver administrator portal.Do i need to configure only these or anything else other than this .One more thing is that when i enter the netweaver administrator portal i am getting these error messages.
    System Landscape Directory is not accessible
    Only local system can be administered
    Any pointers regarding this.Thanx in advance .

    Hi there,
    The java stack is installed as standalone or ABAP+Java?
    You need to maintian SLD server details in RZ70 on ECC server and test if data is sent successfully. Check for RFCs SLD_UC/SLC_NUC in ECC.
    Also, check if SLD server is running.
    regards, Sean.

  • STEP BY STEP  Configuration require for setup SLD Connections

    hi I have installed the sneak preview 7.0 netweaver.
    I would like to set up the SLD connection for R/3 system.
    kindly provide the step by step configurations requied to set upd the SLd connection to R/3 server
    Regards
    Vijay

    Hi,
    Refer to this document - [SLD Configuration guide for SAP NW7.0|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1]
    For more info on SLD refer to this link - [SLD|System Landscape Directory (SLD)]
    Regards
    Srikanth KV

  • Configure TREX 6.1 for EP6 SP12

    Dear Friends,
              We have EP6 SP12 installed on windows 2003 server. We have just installed TREX 6.1. I dont get to see the TREX configuration within portals. I suppose the configuration should lie under System Administration -> System Configuration -> Knowledge Management -> Content Management -> TREX. I dont see TREX under Content Management. Can someone guide me where to configure TREX within portals?
    Thanks,
      J.D

    After installing, You shold configure indexes, crawlers, repositories etc.
    All configuration could be found in "System Administration -> System Configuration -> Knowledge Management -> Index Administration" and "related links" section in that area.
    You can also check this: http://help.sap.com/saphelp_nw04/helpdata/en/e2/9c7de32a3984429607de7e1b519a09/frameset.htm
    and this: http://help.sap.com/saphelp_nw04/helpdata/en/c2/d81e40777cdd5fe10000000a155106/frameset.htm
    Hope this helps
    DK

  • How to change host name for SLD

    Hi All,
    How is possible to change host name of SLD configuration?
    I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
    How can i do it?
    Thanks a lot!
    Alex

    Hi,
    you can change it in System Landscape directory.
    Go to the http:yourportal.com:50000/sld
    then click on the Landscape and update the new host name.
    Raghu

  • What tasks I should select in NWA Configuration Wizard for PI component

    Hello,
    I'm in the stage of setting up the NetWeaver 2004S SR2. I've logged to the Net Weaver Administration console. According to documentation, to properly configure PI component I should execute Configuration Wizard task. The problem is that documentation is not very specific on what exact tasks I should execute, so I would like to get some advise from the community.
    All tasks I can see are:
    BI_00_This wizard will execute Postinstall steps of technical configuration of BI-Java Initial  
    DI_Allinone_This wizard run all post installation steps for DI, CBS, CMS and DTR. Initial  
    DI_CBS_This wizard run all post installation steps for CBS. Initial  
    DI_CMS_This wizard run all post installation steps for CMS. Initial  
    DI_DTR_This wizard run all post installation steps for DTR.
    DI_This wizard sets the Oracle Parameters as per CSN note: 848708 Initial  
    MI_00_This wizard will execute Postinstall steps of technical configuration for the NetWeaver Mobile Infrastructures
    MI_01_This wizard will create User and Assign Dedicated roles  for the NetWeaver Mobile Infrastructure Initial  
    MI_02_create JCo Initial  
    MI_03_create TCP/IP
    MI_04_register Connection Initial  
    MI_05_set profile in ABAP Initial  
    MI_06_schedule MI Job Initial  
    NWA_01_This wizard will execute configuration for local SLD Initial  
    NWA_02_SLD system : Connect SLD to CEN (if CEN present)
    NWA_03_Creating a connection to the SLD and Setting required authorizations for SLD (CIM client settings)
    NWA_04_Creating a connection to the ABAP stack of CEN and Starting heartbeat monitoring Initial  
    NWA_05_NWA system : Store access data per each managed Java system (optional) Initial  
    NWA_06_NWA system : Register each managed ABAP system to SLD Initial  
    NWA_07_creates Destination for Data Supplier Bridge
    PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Initial  
    PI_01_This template checks if the necessary services are started Initial  
    PI_02_This wizard will test the BAPI call to SWF_XI_BPM_AUTO_CUSTOMIZE Initial  
    PI_03_This wizard will assign the Application roles Initial  
    PI_04_This wizard will Maintain_Technical_System
    PI_05_This wizard will configure the integration server for sld Initial  
    PI_06_This wizard will create the necessary Destinations in ABAP Initial  
    PI_07_Create_RFC_Destinations_in_Java Initial  
    PI_08_This wizard will Maintain Http Destination Initial  
    PI_09_This wizard will configure Role of Integration server
    PI_07_Create_RFC_Destinations_in_Java Initial  
    PI_08_This wizard will Maintain Http Destination Initial  
    PI_09_This wizard will configure Role of Integration server Initial  
    PI_10_This wizard will Register_Queues_NA Initial  
    PI_11_This template services are started
    I guess I need to mandatory execute PI_XX tasks, but what about others - do I need to execute anything else (I need only PI component to be installed and configured)? Not sure if that makes any difference, but this is the very first time I get into the NWA, so no previous configuration tasks were executed from the Configuration Wizard.
    My full system configuration: NetWeaver 2004S SR2 ABAP+Java, Windows 2003 32-bit with MS SQL Server 2005.
    Thanks in advance.

    Hi Maxim,
    Please follow this procedure:
    1) Using Config tool Modify VM setting as per requirement (OS and H/W Dependent) Refer note 723909 Java VM settings for J2EE 6.40/7.0.
    2) To set Environmental Variable refer Note 314530 - Number of RFC/CPIC connections for external clients. These parameter should be taken care while installing templates
    Set these:
         1) gw/max_conn 2000
         2) gw/max_sys 1200
         3) gw/max_overflow_size 40000000
         4) gw/max_shm_req 200 (this is to adjust the memory   allocation)
    Profile parameters
    rdisp/tm_max_no 5000
    rdisp/max_comm_entries 200
    ITS
    CPIC_MAX_CONV 5000(Should be taken care that it should be set for <sid>adm user
    3) Installing Template
    Go to home page
    http://hostname:portnumber/webdynpro/dispatcher/
    Click Deploy and change
    4) After This Click Configuration tab and then click Install
    For the next tab select scenario PI
    And configure template and finally install
    5) In case you face any problem while importing please read these notes for altering parameters
    Note 314530 - Number of RFC/CPIC connections for external clients
    Note 923359 - Collective Note: Configuration Wizard - Template Installer
    Hope it will Help you at this stage at development stage
    You need to import SAP BASIS Software Component Version into Integration Repository based on your SP Level & XI or PI.
    You need to download it from [service market place.|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ]
    Regards,
    Gagan Deep Kaushal

  • Errors in few of the step while running configuration wizard for PI 7.0

    hi all,
    i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
    now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
    now in this i got error in few steps:
    STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
    the error was: CIM_ERR_FAILED: Object manager is not activated
    PI_05_This wizard will configure the integration server for sld.
    The error was:
    Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
    PI_09_This wizard will configure Role of Integration server
    Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
    What should i do?
    Regards,
    Priyanshu Srivastava

    Hi Priyanshu,
    "Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
    Regards,
    Blanca

  • Configuring trex in ccm 2.0

    Hi,
    We are using SRM 6.0 and CCM 2.0, after creating supplier,master and procurement catalog, and while publishing procurement catalog we realized we have not configured trex, so kindly let us know how to do the same along with anyother details you think will help us in doing the same.

    Hi Vishal,
    Mail me on
    [email protected]
    or give yr ID for
    TREX setting doc .
    BR
    Dinesh

  • IDOC setup for SLD

    Dear XI experts,
    I woule like to ask you when I want to do the PI setup for IDOC sending and receiving in the SLD, as to what steps I have to take for this. I had done the setup and chosen ABAP as a choice in the Technical and Business system, however, I am not clear where I should define the Integration server to be able to choose this when I create a Technical and Business system and do the assignment of the Integration server.
    Perhaps I need to do step by step the SLD setup for  IDOC sending and receiving from SAP Backend and viceversa to find what I am missing.
    Thanks for your input.
    Best regards

    Hello,
    Check this blog "How To Configure IDoc Adapters" https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
    It consist all setting including all steps required for SLD.
    BR,
    Dzmitry

  • Installing ECC 6.0,  XI not full in place Option for SLD

    We r Installing ECC 6.0,  and we dont have XI fully installed in place and also another ECC 6.0 in place.
    While installing ECC 6.0, it gives 3 options reg the SLD configuration as :
    > No SLD destination
    > Configure a local SLD
    > Register in the Central SLD
    Which one should I select.
    If i select the first option (No SLD destination), in the future can I change it to the last one.
    -Naveen.

    Hello Naveen,
    The first one is telling that u r not using the SLD in u r landscape
    The second one is telling that U r about to configure the Local SLD on u r current installation only...
    The third thing tell us that if there is already configured  SLD in u r previous system and u want to use that SLD for u r current installation then u have to redirect the configuration parameter to the existing SLD only...
    AS for example...
    In my system previuosly i have one DEV system installed with SLD configuration...after ward i had installed the PRD system and at the time of installation by mistakenly i had installed a new SLD over there in PRD also.....
    but after some time as of requriement i have to make only one SLD between DEV & PRD system so later on i will redirect the PRD SLD to DEV SLD...
    so after installation u can change/reconfigure u r SLD also...
    if you want the steps for the same then let me know..
    if this information is usefull to u then please give points..
    thanks

Maybe you are looking for