Congrats, you're our 1 millionth "Focus probelm" poster!

For a particular tabel column, I have an cell editor that extends DefaultCellEditor and uses a JTextField as the editorComponent.
I tried attaching an InputVerifier to the JTextField... the verify() method returns the correct boolean value, but that does not stop the editor from losing focus.
Basically, I cannot keep the focus trapped in the cell editor component.
I tried using a VeotableChangeListener, but that gets stuck in an infinite loop when I veto focus. (I would only veto when the focusOwner changes, and when the oldComponent == editorComponent).
So does Input Verification not work on JTables?? Overriding the stopEditing() methods do not help, again, because I want to prevent focus from leaving the editor (stop editing only prevents the editing action for stopping, and only sometimes affects focus ownership as a distant side effect).
My ideal solution would be something like a GlassBlockingPane over everything except the editor component... and toggling the glass pane on/off would be decided by an input verifier... how to do this?
Thanks,

Thank you for your reply camickr.
If you run the code posted at the above link, you'll see it suffers from the same problem I describe, namely, that the input verifier cannot prevent the focus loss. Try typing in the cell then clicking the minimize button, or just click on a column header. The cell editor will lose foucs.
If I come up with a good solution, I will post it here for future reference.

Similar Messages

  • Can you help me get this blog posted on ALL possible parts of the website? Please read.

    DUAL SIMM CARD CAPABILITY and WORLDFONE QUAD-BAND CAPABILITY.  This is the crux of the biscuit (as Frank Zappa once said).  Multiple SIMM-card quad-band world-phones (2 or more SIMM cards per phone AND cover the North American and Pan-Asian GSM bands) are what ALL the manufacturers (RIM, Apple, Nokia, Ericson, Motorola, etc.) PURPOSELY FAIL TO ADDRESS because they are under pressure from the service providers (AT&T, Verizon, etc, etc.) NOT TO OFFER THESE IN THE NORTH AMERICAN MARKET.  The reason is twofold.  First, for a phone to hold multiple SIMM chips simultaneously, it must inherently be UNLOCKED (where SIMM cards from any multiple providers can be inserted into the same phone simultaneously).  Second, the big service providers don't mind you having a quad-band worldphone, as long as they can bill you BIG $ for international roaming in foreign countries, they cannot milk you like this if you have a local SIMM card installed for that foreign country (ie: use the foreign SIMM card telephone number when making or receiving calls overseas in that particular country).  ALL THESE PHONE MANUFACTURERS ARE SOMEHOW IN THE POCKETS OF THE CELLULAR PROVIDERS NOT TO OFFER MULTIPLE SIMM-CARD CAPABLE WORLDBAND PHONES WITHIN THE NORTH AMERICAN MARKET.  There is a Chinese company called Jing Cheng that introduced the first integrated Dual SIMM chip worldband phone (model # JC 666s).  These were not internet or e-mail capable, but showed the western world what this is all about.  Thank our cellular providers AND our phone manufacturers for keeping the wool pulled over our eyes in North America.  Such dual SIMM card worldband phones have been available for YEARS in Germany, Australia, China, Japan, etc.  IT'S TIME ALL THE PHONE MANUFACTURERS UNDRESS AND SHOW WHOM THEY REALLY HAVE LOYALTY TO (the cellular providers OR their customers).
    Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

    I quite simply don't know where to begin.   I guess at the beginning would be best.  This Community Support Forum is as the name implies, a forum for user to user support.  It is not a blogging site.  I imagine you made an error and thought you were posting to such a site of which you belong and post your blogs to.
    As this is a forum I can only surmise that this is not a blog or a post to assist/support another member but rather a misguided rant.
    I am now on my second Blackberry, both of which had a worldwide capability.  My first was the Blackberry Storm 9530, the Storm 1.  My current Blackberry is the 9550, the Storm 2.  Both were locked to my carrier (Verizon).  In anticipation of a trip abroad I had the 9530 unlocked by Verizon in order to avail myself of local SIMM cards during my travels.  A hospitalization has delayed the trip but prior to departure, Verizon will unlock my 9550.  There are any number of sites that will, for a fee, provide an unlock code for you.  Pay your money and take your chances.  Make sure you choose wisely.
    Carriers are generally willing to do this for customers in good standing.  This, of course, begs the question of why a Blackberry (or any device) is locked to a specific carrier.  I do not know of anyone, who has paid full price for their phone Smart or otherwise.  Most device purchases are at steep discounts or rebates predicated on a contractual term of service with the retailer (carrier).  This how they recoup the cost of the discount.  Having the phone locked prevents someone from availing themselves of a heavily discounted device at a carrier's expense and immediately jumping ship to another carrier.  That lock combined with an Early Termination Fee "ETF" is what keeps the latest and greatest devices affordable for the vast majority of us.  It is not the best system but it works.
    A dual SIMM capability on a phone with neither email or Internet access is well, quaint.  It is for lack of a better term, a phone.  I am not surprised given the Peoples Republic of China's support of freedom of information, that they have such a restricted device.  I want every bell and whistle that RIM can put on their product and with the 9550, that is what I have.
    There is no grand conspiracy between the manufacturers and the carriers.  Perhaps, you might want to start a telecommunications industry conspiracy blog.  Perhaps you could use that wonderful Dual SIMM Chinese device to make posts to it.  Oh, that's right, no Internet access on it.
    Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
    BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
    If there is a Theme on my Blackberry, Hedone it!
    If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
    Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
    If your issue has been solved, please mark the post that solved it for you!

  • "You do not have permission to post in this forum"

    I have another account that cannot do anything much at all, and I would like to get it fixed without a five day wait for a Genius Bar appointment, then a 1 hour bus trip each way with an "I can't help with that" in the middle.
    The account has been broken for over a year.  This is what happens:
    I can submit a question to the community.
    I can open any postings that show as matches.
    If there are no matches and I get thrown to the list of communities, then I can't view or post to any of them.  I see the product names and icons (iPad, for example, but the list of related communities on the right is missing for all products.  Which seems unfair because I own most of them.
    You do not have permission to post to this forum
    It appears you are not allowed to view what you requested.  You might contact your administrator yadda yadda.
    I have posted about this before:
    https://discussions.apple.com/message/17393255#17393255
    with no real answer (a threat of possible help, if you like, but with no resultant benefit.)
    My question is - how does one get help with the help forums?  I have phoned Apple's help desk and they said they could not do anything.
    I would really like to get my primary account working - it connects to the right email address, it all set up and comfortable - and it does not use my name and location as an alias (who's idea was that?  Fire that person!)
    If you know of any court of appeal, help desk support forum support line, 21-step program or anything else that might help, please tell me.  This has gone on long enough.
    I tried to do something about this from the other account but to get support for the support communities you have to be able to post to them.
    "That's some catch, that Catch-22"
    "It's the best there is."
    Thanks in advance for your help.
    PG.

    Seventy-one -  To my knowledge, I have been a model citizen.  And not impertinent of you at all - a very reasonable question.  All words have been 1-3 or 5+ letters long, I certainly have not received any communication (that I have been able to find) that indicates a transgression.  And there is another question - which castle, and are you saving for the deposit?
    Bleach  - other user name is "Ploughguy".  But I was more after a means of contacting those with influence myself.  Most fora like this have a contactable moderator or administrator.  I am rather amazed that one needs the intercession of the saints.  Such as St Roger...
    Roger - This situation.  The "can't look-can't post" situation.  It has been (not) happening for some time.
    I previously raised the issue here .
    BTW, I created yet another ID because I was not careful enough when I set up the second ID and it defaulted to "NameFromSuburb".  This is OK for johnfromnewyork but a huge privacy risk if you are ranulffromlittlestorpingintheswuff - an unusual name in a small place.  I do not know how that default got through the peer review. Basically it says "ranulf has the good taste to own an Apple something which is portable and fenceable, and he lives not far from here".  I have suggested to the privacy people that it is a very bad idea.  And yes, I realise my alias is already out there.  I have asked the privacy people to blow it away.

  • The version of GroupWise you are using cannot access this post office

    I built a new Server and added it to my PCSD Tree. The new server name is
    GroupWise and has an IP Address of 10.10.0.13.
    I followed the GroupWise 7 Installation Guide and installed GroupWise to
    this server. At no point did I find any place to enter the GroupWise
    License.
    During the install I discovered that 4 of my long time employees were not
    able to be assigned to this new GroupWise server. It appears that a one
    time (Long time ago) these 4 employees were part of an old GroupWise Mail
    server that must have been removed. I can not find any reference to this
    old GroupWise server. My thought is to delete the accounts for there 4
    users and recreate the accounts.
    However the larger problem is this: I can not login to the GroupWise
    Server. Below are two screen shots of what I’m getting when I
    launch the GroupWise 7 Client. When I look at the .NLM loaded on the
    Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
    Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
    On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
    message in the message window “The version of GroupWise you are
    using cannot access this post office”. Then after clicking OK three
    times, the following message appears on the screen “GroupWise did
    not initialize successfully, Please run GroupWise Setup, or contact your
    system administrator. Unspecified error OLE Error 80004005

    *During the install I discovered that 4 of my long time employees were not
    able to be assigned to this new GroupWise server. It appears that a one
    time (Long time ago) these 4 employees were part of an old GroupWise Mail
    server that must have been removed. I can not find any reference to this
    old GroupWise server. My thought is to delete the accounts for there 4
    users and recreate the accounts.
    **You need to disassociate these four NDS users from any GW attributes.
    Right-click each user in C1, GroupWise Utilities->GW / eDirectory
    Association->Disassociate GroupWise Attributes.
    *** When I do as instructed I get the following error:
    [username] is missing the following attribute: NGW: Post Office
    ~~~~~~~~~~~~~~~~~~~~~~~~
    *GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
    Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
    **If the post office is closed, you need to determine why this is. On the
    MTA, hit F10, Configuration Status, highlight your PO and hit enter,
    select details, then look at the last closure reason.
    *** Last Closure Reason= Missing or incomplete address information
    [ When I installed GroupWise, I wanted all the e-mail to be stored on the
    EMAIL Volume. During the install, I Changed the Install Directory to
    \Groupwiseemail. After the install I have two directories in this volume.
    One called DOMAIN and the other called PCAM (PCAM is name of my domain).
    ~~~~~~~~~~~~~~~~~~~~~~~~
    *On the Client, when I launch GroupWise, The Novell GroupWise Startup has
    a message in the message window 'The version of GroupWise you are
    using cannot access this post office'.
    **What version of GroupWise is on the server and what version client are
    you
    using? Also, if you pull up the properties of both the domain and post
    office in C1 what is the database version listed as?
    *** I installed GroupWise 7 both Server and Client. I'm thinking this is
    due to the Post Office being closed. I only have 1 Post Office.
    Thank You;
    Lewis

  • "You have included content in your post that is not permitted" when trying to post very positive feedback about Apple.

    So I spent 2 hours writing a huge post about how I love what Apple has done with the Audio/MIDI/Sound config tools in OSX. 
    I spent alot of time trying to be positive.  And i get to the end and click "Post" - this stops me and gives me the following vague message:
    "You have included content in your post that is not permitted."
    I am not sure what this means or why it appeared.  I used no negative content in my post, no cursing or trolling or anything... And i wouldn't try to troll or flame on these forums anyways.  I've posted some problems I've had, which were all addressed very quickly by the way.  And I've always said what I thought, but never just posted things to be negative.
    And then after my post is rejected, i tried again.  The discussion forums offered to restore my previous draft, but I clicked yes and nothing happened.  Then the entire Discussions site pretty much stopped functioning... I tried closing reopening Chrome.  I tried a completely new session in Chrome Incognito.  I tried using Safari.  None worked. 
    I was then offered a survey to take.  I clicked "yes", and nothing happened.  Then I looked at the Javascript Link for the survey and used the Chrome console to send the javascript anyways.  And then it said the survey was behind my browser (it wasn't) and there was an "X" button to close the yellow notification at the top of the page.  Then restarted my computer and it's finally working, but my post is still being rejected, which is ridiculous.
    Anyways, went through alot to say something positive.  That is the exact thing that gets to me though, it's the censorship.  Why am I not allowed to say something good?  Hopefully this one goes through...

    I don't believe I'm circumventing any DRM/Copyright.  I'm currently enrolled in a Harvard eDx Copyright Law class. As long as you are original and offer a minimum of creativity, you are eligable for a copyright, without any need for registration.  But that's besides the point.  I can see how it may have flagged the post though.
    Ultimately, what I was trying to do at the time is play music using software that I own and stream this in online video.  But the comment about streaming my personal music online is just an example of something awesome I can do with an Apple product.
    Thanks for the link to the feedback page though.  I'll go ahead and send it in.

  • Could you check our source? (To determine the PR type and number range)

    Hello.
    We use SRM Server5.5 with Classic Scenario.
    We will use the BADI BBP_SC_TRANSFER_BE to determine the PR type and number range according to your recommend.
    We have two PR type in R/3.
    1) KGPR
    2) KTR1
    As you know that shopping cart has no type. So we add customer field to mapping to R/3 PR type and this field has two values.
    1)     PR01: mapping to KGPR
    2)     PR02: mapping to KTR1
    We will use the method GROUP_RQ to determine the PR type.
    If customer field is PR01, PR type is determined KGPR
    If customer field is PR002, PR type is determined KTR1.
    To determine the PR number range, we will use the method GET_NUMBER_OR_RANGE.
    If PR type is KGPR, Choose the No key 12
    If PR type is KTR1, Choose the No key 16.
    Configuration step:
    1.     Maintain the PR number range in SRM.
    No key: 12  (for KGPR) internal NR
    No range: 2520000000 – 2529000000
    No key: 16 (for KTR1) internal NR
    No range: 2560000000 – 2569000000
    2.     Maintain the PR number range in R/3
    No key: 12  (for KGPR) Ext NR
    No range: 2520000000 – 2529000000
    No key: 16 (for KTR1) Ext NR
    No range: 2560000000 – 2569000000
    3.     Assign the PR number range to PR type in R/3
    KGPR – 12 (EXT)
    KTR1 – 16 (EXT)
    4.     Maintain the attribute in SRM
    Document type in R/3
          Add KGPR and KTR1
    We developed this logic, but it’s not working.
    LOOP AT ct_proc_item INTO ls_proc_item “ Where is no date in ct_proc_item:
    We can not find out the reason.
    Could you check our source?
    METHOD if_ex_bbp_sc_transfer_be~group_rq.
      DATA:
           ls_proc_item           TYPE bbps_procurement,
           lv_number_int          TYPE bbp_item_no,
           ls_item                TYPE bbp_pds_transfer_item,
           lv_group_counter       TYPE numc5,
      CONSTANTS:
          lc_on(1)               VALUE 'X'.
      SORT ct_proc_item BY obj_to_gen.
      CLEAR: lv_group_counter.
    LOOP AT ct_proc_item INTO ls_proc_item  
    where obj_to_gen eq iv_object_to_generate.
    get item data which includes customer fields
        MOVE ls_proc_item-preq_item TO lv_number_int. " convert
        READ TABLE it_item INTO ls_item WITH KEY number_int = lv_number_int.
        IF sy-subrc = 0.
          IF ls_item-pr_type EQ 'PR01'.
            ls_proc_item-doc_type = 'KGRP'.
          ELSEIF ls_item-pr_type EQ 'PR02'.
            ls_proc_item-doc_type = 'KTR1'.
          ENDIF. " lv_cust_field
          lv_group_counter = lv_group_counter + 1.   " increase counter
          ls_proc_item-group_1 = lv_group_counter.
          MODIFY ct_proc_item FROM ls_proc_item
                 TRANSPORTING group_1.
        ENDIF.  " sy-subrc
      ENDLOOP.
      cv_method_active = lc_on.
    ENDMETHOD.
    method IF_EX_BBP_SC_TRANSFER_BE~GET_NUMBER_OR_RANGE.
      if is_item-pr_type = 'PR01'.
         CV_NUMBER_RANGE = '12'.
         CV_NUMBER = '2520000000'.
      elseif is_item-pr_type = 'PR02'.
         CV_NUMBER_RANGE = '16'.
         CV_NUMBER = '2560000000'.
      endif. " is_proc_item / is_item
    Thank you
    Best Regard
    SH

    Hi
    Please find some suitable sample code, which might help you out.
    method IF_EX_BBP_SC_TRANSFER_BE~GET_NUMBER_OR_RANGE .
    * IV_OBJECT_TO_GENERATE
    *   '1' Reservation
    *   '2' Purchase Requsition (BANF)
    *   '3' Purchase Order
    *   '4' Customer Object
    * 1. current item data are in structures
    *    - IS_ITEM shopping cart item data including Customer Fields
    *    - IS_PROC backend relevant item purchasing data
    * 2. accounting data in tables
    *    - IT_ACCOUNT all shopping cart account. data with Customer Fields
    *    - IT_PROC_ACCOUNT backend relevant accounting data for current item
    *  - key criteria between this tables are
    *    - it_proc_account-preq_item
    *                     -serial_no (numc 2)
    *    - guid from is_item
    *    - it_account-p_guid
    *                -accno(numc 4)
    * A) example to use current item data + item customer fields
    *  if is_proc_item-DOC_TYPE = 'ABCD' AND
    *     is_item-<field of CI_BBP_ITEM> = .
    * set own number range
    *  CV_NUMBER_RANGE = .
    ** set own number
    ** .. ==> if initial SAP Standard with no.range will be processed
    *  CV_NUMBER = .
    *  endif. " is_proc_item / is_item
    * B) example to use only proc_account no accounting customer fields
    *data:
    *     ls_proc_account   type bbp_bapipogna.
    *  loop at it_proc_account
    *            into ls_proc_account.
    *    if ls_proc_account-BUS_AREA = '9988'.
    ** set own number range
    *  CV_NUMBER_RANGE = .
    ** set own number
    ** .. ==> if initial SAP Standard with no.range will be processed
    *  CV_NUMBER = .
    *     endif. " ls_proc_account
    *  endloop.
    * C) example to use only accounting customer fields, no other accounting
    *data:
    *     ls_account        type bbp_pds_acc.
    *  loop at it_account
    *            into ls_account
    *            where p_guid = is_item-guid.
    *    if ls_account-<field of CI_BBP_ACC> = .
    ** set own number range
    *  CV_NUMBER_RANGE = .
    ** set own number
    ** .. ==> if initial SAP Standard with no.range will be processed
    *  CV_NUMBER = .
    *   endif. " ls_account
    *  endloop.
    * D) example to use proc_account + customer fields for accounting
    *data:
    *     lv_serial_no      type bbp_bapipogna-serial_no,  " sequence num 2
    *     lv_acc_no         type bbp_pds_acc-acc_no,       " sequence num 4
    *     ls_proc_account   type bbp_bapipogna,
    *     ls_account        type bbp_pds_acc.
    *  loop at it_proc_account
    *            into ls_proc_account.
    *    move ls_proc_account-serial_no to lv_acc_no.
    *    read table it_account
    *         into ls_account
    *         with key p_guid = is_item-guid
    *                  acc_no = lv_acc_no.
    *    if sy-subrc = 0.
    **     if ls_account-<field of CI_BBP_ACC> = .
    ** set own number range
    **  CV_NUMBER_RANGE = .
    ** set own number
    ** .. ==> if initial SAP Standard with no.range will be processed
    **  CV_NUMBER = .
    **      endif. " ls_account
    *    endif. " sy-subrc
    *  endloop.
    endmethod.
    method IF_EX_BBP_SC_TRANSFER_BE~GROUP_RQ .
    * 1. current item data are in structures
    *    - IT_ITEM all shopping cart item data including Customer Fields
    *    - IT_PROC_ITEM backend relevant item data of current log.system
    *    key criteria between this tables are:
    *    - IT_ITEM-NUMBER_INT (numc 10)
    *    - IT_PROC_ITEM       (numc  5)
    * 2. accounting data in tables
    *    - IT_ACCOUNT all shopping cart account. data incl. Customer Fields
    *    - IT_PROC_ACCOUNT backend relevant accounting data for current item
    *  - key criteria between this tables are
    *    - it_proc_account-preq_item (numc 5)
    *                     -serial_no (numc 2)
    *    - is_item-guid
    *             -number_int (numc 10)
    *    - it_account-p_guid
    *                -accno(numc 4)
    constants:
          lc_on(1)               VALUE 'X'.
    * A) example to use only proc_item with NO customer fields
    *         group requisitions by backend document type
    *data: lv_doc_type            TYPE esart,
    *      ls_proc_item           type BBPS_PROCUREMENT,
    *      lv_group_counter       type numc5.
    *    clear lv_group_counter.
    *    clear lv_doc_type.
    *    SORT ct_proc_item BY obj_to_gen doc_type.
    *    LOOP AT ct_proc_item
    *            into ls_proc_item
    *            WHERE obj_to_gen EQ iv_object_to_generate.
    ** new group criteria?
    *      if lv_doc_type ne ls_proc_item-doc_type.     " backend doc.type
    *        lv_group_counter = lv_group_counter + 1.   " increase counter
    *        lv_doc_type      = ls_proc_item-doc_type.       " save criteria
    *      endif.
    *      ls_proc_item-group_1 = lv_group_counter.
    *      modify ct_proc_item from ls_proc_item
    *             transporting group_1.
    *    ENDLOOP.
    * B) example to use item customer fields
    * data:
    *      ls_proc_item           type BBPS_PROCUREMENT,
    *      lv_cust_field          type <field of ci_bbp_item>.
    *      lv_number_int          type BBP_ITEM_NO,
    *      ls_item                type BBP_PDS_TRANSFER_ITEM.
    *    clear lv_group_counter.
    *    clear lv_cust_field .
    *    SORT ct_proc_item BY obj_to_gen.
    *    LOOP AT ct_proc_item
    *            into ls_proc_item
    *            WHERE obj_to_gen EQ iv_object_to_generate.
    ** get item data which includes customer fields
    *      move ls_proc_item-preq_item to lv_number_int. " convert
    *      read table it_item
    *           into ls_item
    *           with key number_int = lv_number_int.
    *      if sy-subrc = 0.
    **       new group criteria?
    *        if lv_cust_field ne 'XYZ'.
    *         lv_group_counter = lv_group_counter + 1.   " increase counter
    *         lv_cust_field = ls_item-<field of ci_bbp_item>."save criteria
    *        endif. " lv_cust_field
    *        ls_proc_item-group_1 = lv_group_counter.
    *        modify ct_proc_item from ls_proc_item
    *               transporting group_1.
    *      endif.  " sy-subrc
    *    ENDLOOP.
    * C) example to use accounting data with customer fields
    *            group requisitions by backend document type
    *data: lv_doc_type            TYPE esart,
    *      ls_proc_item           type BBPS_PROCUREMENT,
    *      lt_account             type BBPT_PD_ACC,
    *      ls_account             type bbp_pds_acc,
    *      ls_item                type BBP_PDS_TRANSFER_ITEM,
    *      lv_number_int          type BBP_ITEM_NO,
    *      lv_account_flag        type c,
    *      lv_group_counter       type numc5.
    *    clear lv_group_counter.
    *    clear lv_doc_type.
    *    SORT ct_proc_item BY obj_to_gen doc_type.
    *    lt_account[] = it_account[].
    *    SORT lt_account BY p_guid acc_no.
    *    LOOP AT ct_proc_item
    *            into ls_proc_item
    *            WHERE obj_to_gen EQ iv_object_to_generate.
    ** get accounting customer fields for this item
    *    clear lv_account_flag.
    ** ..first get item guid
    *    move ls_proc_item-preq_item to lv_number_int.
    *    read table it_item
    *         into ls_item
    *         with key number_int = lv_number_int.
    *    if sy-subrc = 0.
    *      loop at lt_account
    *           into ls_account
    *           where p_guid = ls_item-guid.
    *        if ls_account-<field of CI_BBP_ACC> = .
    *           lv_account_flag = lc_on.
    *        endif.
    *      endloop.
    *    endif. " sy-subrc it_item
    ** new group criteria?
    *      if lv_doc_type ne ls_proc_item-doc_type OR     " backend doc.type
    *         lv_account_flag = lc_on.                    " accounting
    *        lv_group_counter = lv_group_counter + 1.   " increase counter
    *        lv_doc_type      = ls_proc_item-doc_type.       " save criteria
    *      endif.
    *      ls_proc_item-group_1 = lv_group_counter.
    *      modify ct_proc_item from ls_proc_item
    *             transporting group_1.
    *    ENDLOOP.
    * !!!! set flag that BADI was processed
    * .. ==> no SAP Standard grouping will be processed
        cv_method_active = lc_on.
    endmethod.
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • You have included content in your post that is not permitted.

    I posted a question in the discussion and replied the response "You have included content in your post that is not permitted." I re-read my post. There was no swear word, no questions about doing anything illegal or violation any TOS, and no link that could cause a problem. So I started editing my post and I found the guilty word: "Streaming" and "Live" together (let's see if it goes through in this post).
    My suggestion is, instead of giving a broad statement, to actually list the words that are not permitted. This will save us time trying to figure out what offended the automated censor.

    EricDu wrote:
    So, once again, legit users are punished for the behavior of a few bad apples (no pun intended).
    Yep. That's the way of the world.
    I still think the filters could be more friendly. Taking, for example, the user's posting history into account.
    I would agree, but Jive, the software that these forums run on, may not allow that sort of flexibility. Or Apple Legal may not allow that sort of flexibility.
    Regards.

  • What name do you see as  author of this post ?

    Hi,
    Just wondering if my display settings are giving me the required appearance for other users.
    You get to see different yourself to what the rest of the world get to see.
    What name do you see as author of this post ?
    Cheers
    Merlin3

  • Do You Use the TestStand API Reference Poster?

    The TestStand R&D Team would like to know how you use the TestStand API Reference Poster that ships with TestStand.  How often do you use it?  Is it hanging up near your computer?  What tasks do you use it for?
    Allen P.
    NI

    Hi,
    I dont use the hard copy. I unfolded the it the first time it appeared in version 3.0. Refolded it, put it back in the box and have never bothered with it since.
    I have used the electronic version now again, when I haven't got access to the programmer help doc which you find in the teststand\bin folder.
    I find its use limited, as it only really gives you the relationship between classes and a list of the properties and methods. This you can obtain for the help document.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Bought a new computer. How do you transfer our music

    Just bought a new computer. How do you transfer our music &amp; apps over from our old computer.

    It sounds like you have a PC.  You would have to consult Microsoft as to how to transfer files over in Windows from PC to PC.  That's not an Apple situation.
    Hope this helps

  • Do you think our Flash game has a chance on Kickstarter (playable demo)

    So me and my friend have been working on a game and recently we made it so far that we decided to launch a Kickstarter. Last Jungle In Sector 17 is a new take on the traditional top-down view space shooter with added RTS elements, some of the games we relate to are SPAZ, Star Control and classic Asteroids.
    Here's our project: http://www.kickstarter.com/projects/1396394944/last-jungle-in-sector-17/
    And here's the game: http://ljis17.com/prototype/
    I wouldn't say we are doing anywhere near great as of now on Kickstarter, I'm doubting that we even reach the goal. We wanted to go in safe, small goal, playable demo (with easy access to it), reasonable backer rewards... I noticed the small visibility right after launch, but following a post on Reddit I calmed down a little. Well 10 days later we are still struggling to get attention, I sent out a letter to 65+ gaming news sites - 1 responses as of now (0 articles), also sent a review request to about 100 Youtubers who do review videos - got 2 'first impressions' vids. In that 10 days we have managed to get 3,369 video views (3000 of them in the first 2 days after launch) and 45 people have backed the project.
    We have done all the regular: Homepage, Greenlight, Demo, Facebook, Twitter, Forum posts, IndieDB... We have gotten some good response from people who have tried out the game, but I guess it is just too average of a game.
    Are the news outlets avoiding Kickstarter projects because the market is so over saturated or are people turned off when they hear the words "Flash game"? Either way our "Indie Dream" is slowly turning into "Indie Reality" which is fine, definitely smarter now and in the future. I still think that Flash is a great platform, maybe the testament to that should be the number of Flash games out there.
    Well, let us know what are your thouhgts on all this and what you think of the game

    Hi Javi,
    This sounds like an issue with Windows and your specific Bluetooth devices.  As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers.  Take a look at this link for specific requirements for using Bluetooth with LabVIEW.  Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here.  Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver.  You could check out the Microsoft Knowledgebase for more information.  Thanks and have a great day!    
    Stephen S.
    National Instruments
    1 Test is worth 1000 expert opinions

  • I cannot confirm my email address by clicking on the link you sent me because Thunderbird is posting a "not responding" message- it will allow me to access email but not send replies.

    I am caught in a loop- I cannot get thunderbird to allow me to go to the link you sent to confirm my email. My email is [email protected]

    But you just posted here, so you appear to have a working account on this site. Can you repost your query here?
    Thunderbird isn't built to run on iPad or iPhone, so any problems there are outside of Thunderbird itself. You appear to have a fundamental connectivity problem; not sure what we can do to help you here.

  • How do you add Duke Dollars to a post???

    How do you get the little Duke Dollars thingy to show up next to your post? There are no buttons to do so on the page where I'm ttyping this, nor on the preview page. Nor does it say anything about it in the Duke Dollars FAQ.

    Oh never mind! I saw the option to add Dukes appear after the message was posted.
    IMHO you should be able to add Dukes either on the form or the preview page.

  • How do you display code in a forum post

    Hey
    Just a quick question to ask how i display my code on these message boards if im having a problem with them?
    because i can see its not a simple copy and paste
    Thanks

    It's in fact very easy. You can post code and then surround it with code tags. The new code tags look like this:
    &#123;code}
    x=y;
    z=w;
    &#123;code}
    The old code tags look this this:
    [code]
    x=y;
    z=w;
    [[/i]code]
    They work the same. If you don't feel like typing in tags, there is a "code" button right there next to the bold, italics, underline buttons... Just select your code and press the code button.

  • I can't access my old Apple ID, can you please delete the account or posts?

    I can't access my old Apple ID. Before the big account switching, I naively posted my email in a post in a topic here a while back.
    Now it comes up in search results and I don't want to attract any spam. I want to either remove this old account or at least wipe some of the posts I made under the name. Not sure where else I can possibly post this question, totally apologize if it appears rather rude.
    Thanks,
    Message was edited by: css1323

    You're Welcome css!
    "While you may not be able to delete the account."
    As a user/member of  Discussions like your self I have no removal powers at all.
    But in that Thread I notified the Hosts of your address removal request.
    "Btw, is there a way to PM here?"
    Only if a member posts an Email address in their Profile.
    ali b

Maybe you are looking for

  • Junk characters in smartform

    hello friends, I have a developed a smartform and this smartform is assigned to a transaction,when i click print preview button in the transaction, a pdf output will be generated. The problem is some of the characters like " , ', & are not displaying

  • Windows recongnizes one iPhone but not other

    My Mom asked my help because her windows XP PC will no longer recognize her iPhone 3GS or my Dad's 3G for Photo transfer. They show up in iTunes and everything works fine there, but they don't show up anywhere else. I tried all the usual ideas regard

  • Speech recognition for a programmer with RSI (not how to do in Java)

    Guys, someone that I know has developed RSI and has almost had to drop out of programming. Has any other programmer here been faced with this and been able to work around it? In particular, have you found a decent speech recognition system that allow

  • What are all the errors that can be corrected by using tran code rsrv?

    hi all,, what are all the errors that can be corrected by using tran code rsrv? can anyone list me out a list of errors that can be rectified using rsrv. And let me know the steps involved to rectify those errors using trns code rsrv. regds hari

  • Music files duplicated in Finder once played on iTunes after imported

    Whenever I now import songs, albums, etc. to my mac locally they don't show up in itunes until I double click on them directly in finder to make them play in iTunes. However, after they start playing in iTunes a duplicate file is created doubling the