Connecting images to PC.

Hi!
I have BlueSoleil 2.1.2.0 on winxp sp2, and I have paired my nokia 6085 successfuly to the PC, but I can't find how to transfer the images from my mobile to the PC.
I have searched the faqs and read the manual but that info doesn't appear to be there.
Can some one please info me on how to do the transer?
Thanks!

One can transfer files to any appropriate blue tooth devices without the use of pcsuites but one file at a time(fails in multi) be it text message or pictures. Just have it paired(pc & phone) properly first, select the file on the phone then send by bluetooth. But you can do lots of things with pcsuite like installing themes & apps to your phone.
Message Edited by android on 27-Oct-2008 10:43 AM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

I cannot get out of a frozen state on my iPad. It is showing Itunes and usb connection images on screen

PLease help me get my IPAD out of this frozen state. It is showing the Itunes and USB connection image. It will do absolutely nothing! HELP!!!

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Creating and connecting images to indicate tag values

I am trying to create a simplified version of our plant layout on my front panel using images from the image navigator. I would like to create, for example, a rectangle and have it shown green when my discrete tag value is 1 and red when my tag value is 0. I know how to code this for LEDs, however the images I lay down on the front panel do not give me the same options. (and I can’t find a simple rectangle on the image navigator??)
If anyone has any experience using this tool, I would like to know the steps involved from dragging an image on to the front panel to coding an image in the way described above.
Thanks for the help,
Stuart

As the previous post mentions, search for threads on "customizing controls", there have been a number of those. Unfortunately, what you are describing, available in most of the SCADA packages (Intellution, Wonderware, etc.) isn't available in LabVIEW. To do it requires opening a boolean indicator (LED, etc.) in the control editor and then pasting in the appropriate images, doable, but a lot of work to get good looking, controllable images.
Good Luck,
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Question: Saving Image Files In The Repository

Good Morning all,
(Running CR2008)
I have a few image files that I have saved in the Crystal Repository. It works nicely and I've tested it pretty thoroughly to make sure that connected images update across the board. It's a convenient little feature.
Here's my question ... when you save an image file to the repository, it automatically converts the image file to a Bitmap file type. Bitmaps greatly increase the size of whatever .rpt file uses the iimage. My standard .rpt files go from about 240K to 3.4 megs. This isn't really the biggest deal in the world, but I was wondering if there is a setting that I can check that will have the repository files automatically save in JPEG format, or just keep thier original format (JPEG in this case).
Any thoughts? Or are we stuck with the Bitmap format? If so, this might be a good subject for a 'feature request' post.
Thanx in advance for any help.
-TS
Edited to add: Sorry about the double-post. I have no idea why that keeps happening. -TS
Edited by: Tom Salvato on Jan 19, 2010 2:45 PM

Stuck with BMP

How can I keep overlay image on 8 bit image at video acqusition?

Hi, I am using AVT camera Pike with Laview vision 2012
When I use Example code 'Grab and Attributes Setup.vi' (<NI supported Example),
I simply add the event case for overlay function (such as 'IMAQ Overlay Oval') with Image by Local Variables connection (image input - output).
Event case:
Image------[IMAQ Overlay Oval]--------Image
Rectangle Control ---|
IMAQ Overlay should keep the overlay on buffer memory if I input the rectangle value.
Problem is that the overlay disappeared if I use 8 bit image format?.
but at the 16bit image format, the image keep the overlay image (colored overlay).
It seems the overlay buffer is removed by acquiring new 8 bit image, but 16 bit format, the overlay is still alive.
Is it bug or what am I wrong?

upload the error situation block diagram
Attachments:
8bit overlay error1.jpg ‏364 KB

Stacked image hidden from search

Today I was missing an image from the catalogue. I knew it had to be there but I couldn't see it.
I tried to import it again, but the import dialogue indicated that the image had already been imported. Yet, I couldn't see it in the folder where it should have been (all filters turned off, of course).
I used the library search filter to search for the image using its file name (which I knew as I could see the file on the drive) but to no avail.
Q: Where was the image?
A: It was hidden in a stack.
Yes, perhaps a rookie mistake (I just started using Lightroom), but does anybody else agree that the search for the filename should have unearthed the location of the image in the catalogue? Once I had the image unstacked, I could find it using the filename search.
I don't think it would be practical for a user to unstack images first before they have a chance finding them through a search.
I didn't submit this as a bug report because it may be a "feature" rather than a "bug". I invite others to share with me whether they also think it is a bug that stacked images are completely hidden from a search.
N.B. I find it irritating that I cannot move stacks as a whole to a different folder or collection. What's the point of an aggregation if only the top image is moved/copied?
The reason wny I mention this second issue here is that either a stack should be treated as a single entity (contained images are not found in searches and are moved with the top image) or it should be treated it as a lose connection between a sequence of images (only the top image gets moved and "connected" images are found through searches (library filters)).

Hi,
sdodds wrote:
this is a BIG BUG in my mind. if I search for an image by name I don't care where it is, I should find it.
This is rather a design issue that will not be fixed quickly, I'm afraid. In LR, the process of finding an image is tightly associated with the idea of showing it. And the very same code is used in all LR operations when it comes to display images in the Library module. If we want LR to "find" an image located in a collapsed stack, a different way of displaying the filtering results must be implemented.
This is bothering me since the beginning. I also regularly have problems because of images hidden in a stack. For example, after I have edited a few images in a stack, the XMP files for those files are no longer in sync with the catalog (I have disabled automatic saving of XMP files for performance reasons). If I collapse the stack, hit Ctrl A to select all images in the folder and then Ctrl-S to update the XMP files, the XMP files corresponding to the images hidden in a stack will not be updated. I must remember to expand all stacks (or not collapse them) before doing this. Since we are unable to filter on this criteria (the XMP file status), this is obviously an inconsistent and misleading behavior.
IMHO (as a former developer), this example demonstrates that there's something wrong in the LR design. The presentation layer (the code showing us the contents of the library) might be too strongly coupled with the data layer (or application layer), the code manipulating the library data. A common problem in software design. Mistakes made in this area during the design phase are difficult to fix because they are not "simple" bugs. They require changes in the program architecture.
My two cents...
Patrick

My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload and am afraid it 'crashed'

My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload midway and am afraid it 'crashed'

Try putting it into recovery mode.
Connect iPad to your computer via USB while it's turned on.
Open iTunes
Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
Power off the iPad completely (wait for the progress spinner to disappear).
Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
Click on the "Restore" button and the process will begin.

E71 message: USB connection in progress

Hi,
I get this message, although my phone is not connected to the PC. It seems I can't get rid of the message. Everytime when I disconnect my phone from the PC after saving music on the card I get this nasty message. What can I do to avoid this?
Thanks for your help.
Marco

The problem I am having is that I connect my E71 to my laptop via USB and all it good, I can text, browse use the phone like I want to whilst it is connected.
Then I look everywhere for the disconnect (or remove hardware safely), the best option I get is to access the tools menu from and manage connections. Then remove the option for USB (which appears to disconnect the phone).
Then I can't get the phone to disconnect. So I go to connections in the phone and try to disconnect or go to Offline mode, but USB connection image is still displayed and the Media browser says "USB connection in progress".
The only option I have is to turn off the phone.
When I turn the phone back on, my media library is corrupt and the phone has to search and repair the database. this takes about 10 minutes.
So far I haven't found an answer on the web, only other people experiencing the problems.
please help.
thanks
Mike

Mighty mouse keeps loosing connection

so iv had my mighty mouse for over a year and its been used with numerous laptops. i bought a wireless keyboard there a few months ago. i mainly use my mbp as a desktop. yesterday i decided to lug in a 19" dell external monitor. since i plugged that in the mouse was slow and every minute or two (literally) it would come up with the lost connection image. The keyboard works fine. Actually now that i think bout it while i was using the monitor for maybe the first few hours this didn't occur. I did a search of the forums and didn't find much except the relation to the monitor. i unplugged it and the issue has stopped. i tried a different monitor and it also happened. Any ideas anyone?
ok just there 2 minutes after i posted with no monitor plugged in it did it again...
Regards
Message was edited by: alex.lyons

anyone

Open iTunet connect

open iTunet connect
<Image Edited by Host>

Please give us a lot more info about the details of what you are doing on what device
Write in your own language if you are more comfortable
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.

After security patch 03/04/2014 OSX 10.7.5, first one, then a second, external backup drive no longer recognized. Diagnostics for the FireWire one displays brand name of unit, but Time Machine and its own app don't see it. Where do I start?

Yesterday I installed the security patch, OSX 10.7.5 to my IMac that is about 2 years old.
Today my Seagate BackupPlus for Mac will power on but is not recognized. It does not show up as a device, Time Machine says the latest backup was DELAYED, last successful at 03/04/2014 9:35 PM (yesterday) and next backup would begin when the disk was connected. An error message I did not save said basically the drive was not recognized.   I did all drive's troubleshooting steps, including installing a newer version of their app. I tried swapping USB for FireWire, changing electrical outlets, etc.
It seems a bit coincidental to have 2 drives "fail" simultaneously. Is anyone else having this issue after this security patch? What would be the approach from the Mac side? TIA for any assistance.
Please see below regarding the second drive. Is this a red herring, or does it help pinpoint where the failure might lie?
I also have a Seagate GoFlex that WAS recognized until I did the troubleshooting on the other drive. When I put it back on after testing the other drive with FireWire, it now is no longer recognized.
Diagnostics says this about that:
FireWire Bus:
Maximum Speed:          Up to 800 Mb/sec
GoFlex Mac:
Manufacturer:          Seagate
Model:          0x6090
GUID:          0x2037600121908F
Maximum Speed:          Up to 800 Mb/sec
Connection Speed:          Up to 800 Mb/sec
Sub-units:
GoFlex Mac Unit:
Unit Software Version:          0x10483
Unit Spec ID:          0x609E
Firmware Revision:          0x111
Sub-units:
GoFlex Mac SBP-LUN:
Thirdly, in after one of the testing/reboot loops, the HP WiFi printer was no longer recognized, but after a few more it came back.

I have a similar problem.
Moreover, as my external drive is split in 2 for (a) regular storage // (b) time machine usage, I can see in the Finder that I can connect to the (a) regular storage part and use it normally (image 1).
And I cannot connect to the backup part in Finder , nor see it in Disk Utility, nor use it in Time Machine (although it's listed in the Time Machine preferences, image 2), as it does not connect (image 3).
Can somebody help?

Iphone4s was charging and now stuck in recovery mode and wont restore

can anyone help (with ways to fix this issue other than the 1's ive already tred) I was charging my phone and when i went to get off off charge it was dead and only displayed the itunes connect image. I have tried to restore it and when i connect it to itunes it displays this message 'itunes has detected an iphone in recovery mode. you must restore ths iphone before it can be used with itunes' so i tried to restore it may times now but get so far and then have an error message. Ive had error 1611, error 21 error 1611 again and error 21 a further 4 times. I have also been to the apple store and made an appointment with the so called geniuis people however after 4 and a half hours waiting to be seen did they take my phone out the back then over 15 mins later the chap dealing with me came back saying ' WHEN DID YOU HAVE A NEW SCREEN FITTED' I replied 2/3 months ago as i dropped it on my table and the screen cracked so i took it to a phone repair shop and paid £105 to have it replaced and my phone was working fine after I wasnt aware that the warranty covered you for a cracked screen that you was caused because you dropped it accedentaly etc.... well any way tghe chap then said ' I can t help you any further as you need to go back to the shop who changed the screen and get them to resolve this isssue. I asked how on earth can a new sceen fitted cause my phone to go in to recovry mode (2/3 months after the screen was replaced mind) the reply i got was ' Its not my issue its out of my hands........' I was more than tamping, raging fuming leaving there as no advice was given to rectifiy the issue i have with my phone. The following morning i went straight to the shop that replaired/replaced my cracked screen and told them what apple had said to me and that i was to come back to yourselves as you need to rectify the issue? to say the repair guy was baffled is an understatement but in fairness at least he tried to help me and attempted to restore it on itunes 6 times in total and changed the battery to a brnd new 1 plus checked the charging port to make sure this was not faulty. after all his help he was still baffled as to why apple felt its his fault after replacing a cracked screen as the error codes being displayed clearly were a software issue not an issue caused by replacing the crakced sceen'
I was more than happy to pay apple and charges to fix my phone based on the fact my warranty was now null and void (which is pathetic as the replacement screen was an apple origianl replacement screen it was just fitted by someone else whom is qualifed to do so) but wasnt even given the option to pay for any repairs etc.....they simply blamed someone else and offer me no further help.
so a week later after this first hapen to my phone whilst on charge and i still in the same boat and have run out of things to try (which was all found by using google as apple support secton is a load of fresh air and doenst actually give you the info and help your need.
Im grateful of any help that can be offered.

Sorted it now, took it to Apple store and explained etc. was nothing could do but restore the phone. Was told to make sure itunes on PC was up-to-date version before updating iphone which could have caused the error.

IPod Touch 2G Update Problem from 2.2.1 to 4.2.1

Hi @ all
and at the first, sorry for my bad english.
I have a strange problem with my iPod Touch 2G 32GB.
At the moment there is the version 2.2.1 installed.
When i connect it to the pc, there pop's up a Message,
that there is a new version (4.2.1) available.
Wenn i confirm this, the update process is running,
but after some time, it pop's up an error message.
(Mostly error 1601 or 1604).
AND the iPod is complete dark (only black screen).
No apple logo or itunes connect image, only black.
With some time i get 'blind' in the DFU mode and so
i can recover the Version 2.2.1. All other firmwares
3.x or 4.x do not work. Alway's the same Problems.
I have tested this on different pc systems with the newes
iTunse version and in Recover and DFU Modes with the same
bad results.
What can i do, to install the firmware 4.2.1 on my device ?
I hope someone can help me.
Best regards,
AttNet

Yes, i have do all the things, but with the same result.
I have update a second ipod touch 2g 32GB (from my girlfriend) from
2.2.1 to 4.2.1 without problems.
Only my device have this problem.
I have the newest itunes installed on two different pc systems also with
the same bad results.
I found the following. Before the update is started, the device is
in by example DFU mode. I can see it with usbview on the port.
When an update is running normal, this descriptor is canceld and the
device coms up with an other one (by example iBoot Device)
Then the update start. The first USB connection is ok, and then, this
one is canceld but the second on, don't come up.
itunes wait a long time for it and the ist pop up error 160x message.
For my bad device it work's, when i use an firmware file with version
2.x.x but for all others (3.x and 4.x) the update do not work
(while the second usb descriptor don't comes up).
But this is not an hardware Problem of the device and not from the
pc side. 2.x Versions are running .....
I hope someone has an other idea for me :-(
Best regards and thank you for your reply !
AttNet

Help getting iphone 4s out of recovery mode as i keep getting error 1611 or error 21.

can anyone help (with ways to fix this issue other than the 1's ive already tred) I was charging my phone and when i went to get off off charge it was dead and only displayed the itunes connect image. I have tried to restore it and when i connect it to itunes it displays this message 'itunes has detected an iphone in recovery mode. you must restore ths iphone before it can be used with itunes' so i tried to restore it may times now but get so far and then have an error message. Ive had error 1611, error 21 error 1611 again and error 21 a further 4 times. I have also been to the apple store and made an appointment with the so called geniuis people however after 4 and a half hours waiting to be seen did they take my phone out the back then over 15 mins later the chap dealing with me came back saying ' WHEN DID YOU HAVE A NEW SCREEN FITTED' I replied 2/3 months ago as i dropped it on my table and the screen cracked so i took it to a phone repair shop and paid £105 to have it replaced and my phone was working fine after I wasnt aware that the warranty covered you for a cracked screen that you was caused because you dropped it accedentaly etc.... well any way tghe chap then said ' I can t help you any further as you need to go back to the shop who changed the screen and get them to resolve this isssue. I asked how on earth can a new sceen fitted cause my phone to go in to recovry mode (2/3 months after the screen was replaced mind) the reply i got was ' Its not my issue its out of my hands........' I was more than tamping, raging fuming leaving there as no advice was given to rectifiy the issue i have with my phone. The following morning i went straight to the shop that replaired/replaced my cracked screen and told them what apple had said to me and that i was to come back to yourselves as you need to rectify the issue? to say the repair guy was baffled is an understatement but in fairness at least he tried to help me and attempted to restore it on itunes 6 times in total and changed the battery to a brnd new 1 plus checked the charging port to make sure this was not faulty. after all his help he was still baffled as to why apple felt its his fault after replacing a cracked screen as the error codes being displayed clearly were a software issue not an issue caused by replacing the crakced sceen'
I was more than happy to pay apple and charges to fix my phone based on the fact my warranty was now null and void (which is pathetic as the replacement screen was an apple origianl replacement screen it was just fitted by someone else whom is qualifed to do so) but wasnt even given the option to pay for any repairs etc.....they simply blamed someone else and offer me no further help.
so a week later after this first hapen to my phone whilst on charge and i still in the same boat and have run out of things to try (which was all found by using google as apple support secton is a load of fresh air and doenst actually give you the info and help your need.
Im grateful of any help that can be offered.

You must be a Windows sufferer.
http://support.apple.com/kb/TS3694#error1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error21
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

After installing 10.9.5 I keep getting "Application Not Responding" for iMovie, Preview, Elements 10, Quicktime. Also my external drive showing up as camera on in iMovie. I do not have time machine. All was working well before! Processor 2.5GHz i5

iMac 2.5 GHz
Intel Core i5
4GB Memory

I have a similar problem.
Moreover, as my external drive is split in 2 for (a) regular storage // (b) time machine usage, I can see in the Finder that I can connect to the (a) regular storage part and use it normally (image 1).
And I cannot connect to the backup part in Finder , nor see it in Disk Utility, nor use it in Time Machine (although it's listed in the Time Machine preferences, image 2), as it does not connect (image 3).
Can somebody help?

Connecting images to PC.

Similar Messages

Maybe you are looking for