Connecting UCS to IBM DS4700, FC zoning

I am trying to accomplish connecting my UCS to an older SAN that I have to migrate data off. I currently have a UCS system that is connected to an EMC VNX using 8G FC. The zoning for this is configured in my UCS. All works well with the connection to the VNX and I have dual active/active paths working. What I am trying to do is connect a second SAN to my UCS system, a IBM DS4700. This DS4700 currently has a Brocade FC Switch connected to it, which then connects to a IBM bladecenter chassis.
I configured a second VSAN for the IBM array and configured the port on my fabric interconnect with that VSAN. I went into the IBM array and I could see the UCS WWN for my HBA, so I connected it to my UCS. When I did this, I had an unexpected result. My VMWare ESXi host on the UCS could see all the datastores on the IBM DS4700 BUT lost connection to all the ones on the VNX. Also, on the IBM DS4700, all of my paths failed over to the controller that had the host connection from the UCS. I tried to fail them back over to the other controller but they wouldn't move until I disconnected the UCS from IBM DS4700. Once disconnected from the UCS, everything went back to normal on both sides.
Does any one have an idea on how I am setup wrong here? The ESX host on the UCS could see the datastores on the IBM so it is somewhat correct but it caused all sorts of problems.
Thanks in advance.

yes, zones are created on UCS.
Ok, so you don't have enough host ports to connect Controller A and Controller B to each FI. Since you are experiencing some odd failovers i would do this than. Since this is a migration effort and will not be a permanent configuration you can try this route ..connect both controllers to just one FI:
UCS FI FABRIC A:
IBM DS4700 Controller A - Host Port 2
IBM DS4700 Controller B - Host Port 2
this will ensure that UCS servers have access to both controllers so if a LUN on DS4700 happens to failover to another controller, UCS servers can still connect to it.
@dynamoxxx

Similar Messages

HotSpot VM doesn't support connection to an IBM mainframe?

Are there any known issues with HotSpot Client VM (1.4.2_06-b03, mixed mode) or J2RE Standard Edition (1.4.2_06-b03) that would cause problems connecting to an IBM mainframe (OS 390)? If so, what are they?
My program compiles with no errors on a Sun Solaris 10 using Java 1.4.2_06 (i know, old...) and I'm using the IBM Host Access APIs, but I just can't seem to connect to the mainframe.
Any help greatly appreciated. Thanks!

AcceuilApplet.jButton1_actionPerformed(AcceuilApplet.jaDoes this indicate that you are using an Applet?
If so then if you are NOT trying to go back to the host you loaded the Applet from then you will need to sign the jar file containing the Applet.

Connecting UCS 6248 FI to N5K-C5548UP

hi,
How do i connect UCS 6248 Fabric Interconnect to N5K-C5548UP? do i need to use FCoE or vPC as i will have multiple SAN connected (using FC) on FI.
Please suggest best possible solution where i have minimul cabling hedache & can optimise physicl ports on N5K.
Regards
Mahesh

Hi Mahesh,
vPC for FCoE uplink and / or unified uplinks is not supported at this time.
vPC only for pure ethernet uplinks still works the same way.
./Abhinav

Use GLC-T to connect ucs 6120 and 2960s (RJ45),.have SFP validation failed problem

hi,every .
i use GLC-T to connect ucs 6120 and cisco2960s (RJ45),.have sfp validation failed problem.
I have done speed to 1G then I am getting error " link not connected" even I have connected the nnetwork cable..

UCS6120-A(nxos)# show interface e1/7
Ethernet1/7 is down (SFP validation failed)
Hardware: 1000/10000 Ethernet, address: 0005.73d2.934e (bia 0005.73d2.934e)
Description: U: Uplink
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
auto-duplex, 1000 Mb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped never
Last clearing of "show interface" counters never
30 seconds input rate 0 bits c, 0 bytes c, 0 packets c
30 seconds output rate 0 bits c, 0 bytes c, 0 packets c
Load-Interval #2: 5 minute (300 seconds)
input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
RX
0 unicast packets 0 multicast packets 0 broadcast packets
0 input packets 0 bytes
--More--

No suitable driver found error while connecting to remote IBM DB2 database.

While trying to connect to IBM DB2 database on a remote location, though the connection was successful from 'Application Resources', following trace could be recovered while performing 'Run' from 'AppModule':
ERROR:
(oracle.jbo.DMLException) JBO-26061: Error while opening JDBC connection.
----- Level 1: Detail 0 -----
(java.sql.SQLException) No suitable driver found for jdbc:as400://XX.XXX.XX.XXX;naming=system;libraries=TEST;translate binary=true;prompt=false
[891] (oracle.adf.model.bc4j.DataControlFactoryImpl.SyncMode = Immediate
[892] Creating a new pool resource
[893] BC4JDeployPlatform: LOCAL
[894] Propertymanager: skipping reload of file and system based properties
[895] {{ begin Loading BC4J properties
[896] -----------------------------------------------------------
[897] BC4J Property jbo.default.language='en' -->(MetaObjectManager) from System Default
[898] BC4J Property jbo.default.country='US' -->(MetaObjectManager) from System Default
[899] Skipping empty Property jbo.default.locale.variant from System Default
[900] BC4J Property DeployPlatform='LOCAL' -->(SessionImpl) from Client Environment
[901] Skipping empty Property ConnectionMode from System Default
[902] Skipping empty Property HostName from System Default
[903] Skipping empty Property ConnectionPort from System Default
[904] BC4J Property jbo.locking.mode='optimistic' -->(MetaObjectManager) from Client Environment
[905] BC4J Property jbo.txn.disconnect_level='0' -->(SessionImpl) from System Default
[906] Skipping empty Property ApplicationPath from System Default
[907] BC4J Property AppModuleJndiName='model.AppModule' -->(SessionImpl) from Client Environment
[908] Skipping empty Property java.naming.security.principal from System Default
[909] Skipping empty Property java.naming.security.credentials from System Default
[910] Skipping empty Property jbo.user.principal from System Default
[911] BC4J Property jbo.simulate.remote='false' -->(SessionImpl) from System Default
[912] BC4J Property jbo.security.context='oracle.security.jazn' -->(MetaObjectManager) from System Default
[913] Skipping empty Property jbo.object.marshaller from System Default
[914] BC4J Property jbo.use.pers.coll='false' -->(SessionImpl) from System Default
[915] BC4J Property jbo.pers.max.rows.per.node='70' -->(SessionImpl) from System Default
[916] BC4J Property jbo.pers.max.active.nodes='30' -->(SessionImpl) from System Default
[917] BC4J Property jbo.validation.threshold='10' -->(SessionImpl) from System Default
[918] BC4J Property jbo.sparse.array.threshold='20' -->(SessionImpl) from System Default
[919] Skipping empty Property jbo.pcoll.mgr from System Default
[920] BC4J Property jbo.txn_table_name='PS_TXN' -->(SessionImpl) from System Default
[921] BC4J Property jbo.txn_seq_name='PS_TXN_seq' -->(SessionImpl) from System Default
[922] BC4J Property jbo.txn_seq_inc='50' -->(SessionImpl) from System Default
[923] BC4J Property jbo.control_table_name='PCOLL_CONTROL' -->(MetaObjectManager) from System Default
[924] BC4J Property jbo.stringmanager.factory.class='use_default' -->(SessionImpl) from System Default
[925] BC4J Property jbo.domain.date.suppress_zero_time='true' -->(MetaObjectManager) from System Default
[926] BC4J Property jbo.domain.bind_sql_date='true' -->(MetaObjectManager) from System Default
[927] BC4J Property jbo.domain.string.as.bytes.for.raw='false' -->(MetaObjectManager) from System Default
[928] BC4J Property jbo.fetch.mode='AS.NEEDED' -->(MetaObjectManager) from System Default
[929] BC4J Property jbo.323.compatible='false' -->(MetaObjectManager) from System Default
[930] BC4J Property jbo.903.compatible='false' -->(MetaObjectManager) from System Default
[931] Skipping empty Property JBODynamicObjectsPackage from System Default
[932] BC4J Property MetaObjectContextFactory='oracle.jbo.mom.xml.DefaultMomContextFactory' -->(MetaObjectManager) from System Default
[933] BC4J Property jbo.load.components.lazily='false' -->(MetaObjectManager) from System Default
[934] BC4J Property MetaObjectContext='oracle.jbo.mom.xml.XMLContextImpl' -->(MetaObjectManager) from System Default
[935] BC4J Property java.naming.factory.initial='oracle.jbo.common.JboInitialContextFactory' -->(SessionImpl) from Client Environment
[936] BC4J Property IsLazyLoadingTrue='true' -->(MetaObjectManager) from Client Environment
[937] BC4J Property oracle.jbo.usemds='true' -->(MetaObjectManager) from System Default
[938] BC4J Property oracle.adfm.usemds='true' -->(MetaObjectManager) from System Default
[939] BC4J Property ActivateSharedDataHandle='false' -->(MetaObjectManager) from System Default
[940] Skipping empty Property HandleName from System Default
[941] Skipping empty Property Factory-Substitution-List from System Default
[942] BC4J Property jbo.project='model.Model' -->(Configuration) from Client Environment
[943] BC4J Property jbo.max.cursors='50' -->(MetaObjectManager) from System Default
[944] WARNING: Property jbo.dofailoverset to null
[945] Skipping empty Property jbo.dofailover from null
[946] WARNING: Property jbo.envinfoproviderset to null
[947] Skipping empty Property jbo.envinfoprovider from null
[948] Skipping empty Property jbo.rowid_am_conn_name from System Default
[949] Skipping empty Property jbo.rowid_am_datasource_name from System Default
[950] WARNING: Property jbo.ampool.writecookietoclientset to null
[951] Skipping empty Property jbo.ampool.writecookietoclient from null
[952] WARNING: Property jbo.doconnectionpoolingset to null
[953] Skipping empty Property jbo.doconnectionpooling from null
[954] WARNING: Property jbo.recyclethresholdset to null
[955] Skipping empty Property jbo.recyclethreshold from null
[956] WARNING: Property jbo.ampool.dynamicjdbccredentialsset to null
[957] Skipping empty Property jbo.ampool.dynamicjdbccredentials from null
[958] BC4J Property jbo.ampool.resetnontransactionalstate='true' -->(SessionImpl) from System Default
[959] BC4J Property jbo.ampool.sessioncookiefactoryclass='oracle.jbo.common.ampool.DefaultSessionCookieFactory' -->(Configuration) from Client Environment
[960] WARNING: Property jbo.ampool.connectionstrategyclassset to null
[961] Skipping empty Property jbo.ampool.connectionstrategyclass from null
[962] WARNING: Property jbo.ampool.maxpoolsizeset to null
[963] Skipping empty Property jbo.ampool.maxpoolsize from null
[964] BC4J Property jbo.ampool.initpoolsize='0' -->(Configuration) from Client Environment
[965] WARNING: Property jbo.ampool.monitorsleepintervalset to null
[966] Skipping empty Property jbo.ampool.monitorsleepinterval from null
[967] WARNING: Property jbo.ampool.minavailablesizeset to null
[968] Skipping empty Property jbo.ampool.minavailablesize from null
[969] WARNING: Property jbo.ampool.maxavailablesizeset to null
[970] Skipping empty Property jbo.ampool.maxavailablesize from null
[971] WARNING: Property jbo.ampool.maxinactiveageset to null
[972] Skipping empty Property jbo.ampool.maxinactiveage from null
[973] WARNING: Property jbo.ampool.timetoliveset to null
[974] Skipping empty Property jbo.ampool.timetolive from null
[975] WARNING: Property jbo.ampool.doampoolingset to null
[976] Skipping empty Property jbo.ampool.doampooling from null
[977] WARNING: Property jbo.ampool.issupportspassivationset to null
[978] Skipping empty Property jbo.ampool.issupportspassivation from null
[979] BC4J Property jbo.ampool.isuseexclusive='true' -->(SessionImpl) from System Default
[980] BC4J Property jbo.passivationstore='null' -->(SessionImpl) from System Default
[981] BC4J Property jbo.saveforlater='false' -->(SessionImpl) from System Default
[982] BC4J Property jbo.snapshotstore.undo='persistent' -->(SessionImpl) from System Default
[983] BC4J Property jbo.maxpassivationstacksize='10' -->(SessionImpl) from System Default
[984] BC4J Property jbo.txn.handleafterpostexc='false' -->(SessionImpl) from System Default
[985] BC4J Property jbo.connectfailover='true' -->(SessionImpl) from System Default
[986] BC4J Property jbo.datasource_naming_factory='oracle.jbo.server.DataSourceContextFactory' -->(MetaObjectManager) from System Default
[987] WARNING: Property jbo.maxpoolcookieageset to null
[988] Skipping empty Property jbo.maxpoolcookieage from null
[989] WARNING: Property PoolClassNameset to null
[990] Skipping empty Property PoolClassName from null
[991] BC4J Property jbo.maxpoolsize='4096' -->(MetaObjectManager) from System Default
[992] BC4J Property jbo.initpoolsize='0' -->(MetaObjectManager) from System Default
[993] BC4J Property jbo.poolrequesttimeout='30000' -->(MetaObjectManager) from System Default
[994] BC4J Property jbo.poolmonitorsleepinterval='600000' -->(MetaObjectManager) from System Default
[995] BC4J Property jbo.poolminavailablesize='5' -->(MetaObjectManager) from System Default
[996] BC4J Property jbo.poolmaxavailablesize='25' -->(MetaObjectManager) from System Default
[997] BC4J Property jbo.poolmaxinactiveage='600000' -->(MetaObjectManager) from System Default
[998] BC4J Property jbo.pooltimetolive='-1' -->(MetaObjectManager) from System Default
[999] BC4J Property jbo.qcpool.monitorsleepinterval='1800000' -->(SessionImpl) from System Default
[1000] BC4J Property jbo.qcpool.maxinactiveage='900000' -->(SessionImpl) from System Default
[1001] BC4J Property jbo.qcpool.maxweight='-1' -->(SessionImpl) from System Default
[1002] BC4J Property RELEASE_MODE='Stateful' -->(MetaObjectManager) from System Default
[1003] BC4J Property jbo.assoc.consistent='true' -->(MetaObjectManager) from System Default
[1004] BC4J Property jbo.viewlink.consistent='DEFAULT' -->(MetaObjectManager) from System Default
[1005] BC4J Property jbo.finder.range.size='DEFAULT' -->(MetaObjectManager) from System Default
[1006] BC4J Property jbo.passivation.TrackInsert='true' -->(MetaObjectManager) from System Default
[1007] Skipping empty Property jbo.ViewCriteriaAdapter from System Default
[1008] BC4J Property jbo.SQLBuilder='DB2' -->(MetaObjectManager) from Client Environment
[1009] BC4J Property jbo.ConnectionPoolManager='oracle.jbo.server.ConnectionPoolManagerImpl' -->(MetaObjectManager) from System Default
[1010] BC4J Property jbo.TypeMapEntries='OracleApps' -->(MetaObjectManager) from Client Environment
[1011] Skipping empty Property jbo.sql92.JdbcDriverClass from System Default
[1012] BC4J Property jbo.sql92.LockTrailer='FOR UPDATE' -->(MetaObjectManager) from System Default
[1013] BC4J Property jbo.jdbc.trace='false' -->(MetaObjectManager) from System Default
[1014] BC4J Property jbo.abstract.base.check='true' -->(MetaObjectManager) from System Default
[1015] BC4J Property jbo.assoc.where.early.set='false' -->(MetaObjectManager) from System Default
[1016] BC4J Property jbo.use.findbykey.for.assoc='true' -->(MetaObjectManager) from System Default
[1017] BC4J Property jbo.sql92.DbTimeQuery='select sysdate from dual' -->(MetaObjectManager) from System Default
[1018] BC4J Property oracle.jbo.defineColumnLength='skipDefines' -->(MetaObjectManager) from System Default
[1019] BC4J Property jbo.jdbc_bytes_conversion='jdbc' -->(MetaObjectManager) from System Default
[1020] Skipping empty Property jbo.tmpdir from System Default
[1021] Skipping empty Property jbo.server.internal_connection from System Default
[1022] BC4J Property SessionClass='oracle.jbo.server.SessionImpl' -->(SessionImpl) from System Default
[1023] Skipping empty Property TransactionFactory from System Default
[1024] Skipping empty Property jbo.def.mgr.listener from System Default
[1025] Skipping empty Property jbo.use.global.sub.map from System Default
[1026] BC4J Property jbo.debugoutput='console' -->(Diagnostic) from System Property
[1027] BC4J Property jbo.debug.prefix='DBG: ' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1028] BC4J Property jbo.logging.show.timing='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1029] BC4J Property jbo.logging.show.function='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1030] BC4J Property jbo.logging.show.level='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1031] BC4J Property jbo.logging.show.linecount='true' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1032] BC4J Property jbo.logging.trace.threshold='6' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1033] BC4J Property jbo.jdbc.driver.verbose='false' -->(Diagnostic) from System Default
[1034] Skipping empty Property oracle.home from System Default
[1035] Skipping empty Property oc4j.name from System Default
[1036] Skipping empty Property jbo.shared.txn from System Default
[1037] BC4J Property oracle.adfm.useSharedTransactionForFrame='true' -->(MetaObjectManager) from System Default
[1038] BC4J Property oracle.adfm.joinNewFrameTransaction='false' -->(MetaObjectManager) from System Default
[1039] BC4J Property jbo.ejb.txntimeout='1830' -->(SessionImpl) from System Default
[1040] BC4J Property jbo.ejb.txntype='global' -->(SessionImpl) from System Default
[1041] BC4J Property jbo.ejb.txn.disconnect_on_completion='false' -->(SessionImpl) from System Default
[1042] BC4J Property jbo.ejb.useampool='false' -->(SessionImpl) from Client Environment
[1043] Skipping empty Property oracle.jbo.schema from System Default
[1044] BC4J Property jbo.xml.validation='false' -->(MetaObjectManager) from System Default
[1045] BC4J Property ord.RetrievePath='ordDeliverMedia' -->(MetaObjectManager) from System Default
[1046] BC4J Property ord.HttpMaxMemory='102400' -->(MetaObjectManager) from System Default
[1047] Skipping empty Property ord.HttpTempDir from System Default
[1048] BC4J Property ord.wmp.classid='clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95' -->(MetaObjectManager) from System Default
[1049] BC4J Property ord.qp.classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' -->(MetaObjectManager) from System Default
[1050] BC4J Property ord.rp.classid='clsid:CFCDAA03-8BE4-11cf-B84B-0020AFBBCCFA' -->(MetaObjectManager) from System Default
[1051] BC4J Property ord.wmp.codebase='http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701' -->(MetaObjectManager) from System Default
[1052] BC4J Property ord.qp.codebase='http://www.apple.com/qtactivex/qtplugin.cab' -->(MetaObjectManager) from System Default
[1053] Skipping empty Property ord.rp.codebase from System Default
[1054] BC4J Property ord.wmp.plugins.page='http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&ar=Media&sba=Plugin&' -->(MetaObjectManager) from System Default
[1055] BC4J Property ord.qp.plugins.page='http://www.apple.com/quicktime/download/' -->(MetaObjectManager) from System Default
[1056] BC4J Property ord.rp.plugins.page='http://www.real.com/player/' -->(MetaObjectManager) from System Default
[1057] BC4J Property jbo.security.enforce='None' -->(SessionImpl) from System Default
[1058] BC4J Property jbo.security.loginmodule='oracle.security.jazn.oc4j.JAZNUserManager' -->(SessionImpl) from System Default
[1059] Skipping empty Property jbo.security.config from System Default
[1060] BC4J Property jbo.server.useNullDbTransaction='false' -->(SessionImpl) from System Default
[1061] BC4J Property jbo.domain.reopenblobstream='false' -->(MetaObjectManager) from System Default
[1062] BC4J Property jbo.server.retainAssocAccessor='false' -->(SessionImpl) from System Default
[1063] BC4J Property jbo.groovy.debug='false' -->(MetaObjectManager) from System Default
[1064] BC4J Property jbo.busevent.suspendpublication='false' -->(SessionImpl) from System Default
[1065] BC4J Property oracle.adfm.DefaultEventPolicy='NONE' -->(MetaObjectManager) from System Default
[1066] BC4J Property oracle.adfm.useRootFrameOnly='false' -->(MetaObjectManager) from System Default
[1067] Copying unknown Client property (user='TESTER') to session
[1068] Copying unknown Client property (FullProxyInterfaceName='model.common.AppModule') to session
[1069] Copying unknown Client property (jbo.applicationmoduleclassname='model.AppModule') to session
[1070] Copying unknown Client property (jbo.jdbc.username='TESTER') to session
[1071] Copying unknown Client property (BC4JConfigName='AppModuleLocal') to session
[1072] Copying unknown Client property (DsPasswd='workout') to session
[1073] Copying unknown Client property (JDBCName='ConnectTo146') to session
[1074] Copying unknown Client property (DsUserName='TESTER') to session
[1075] Copying unknown Client property (name='137E06086E5') to session
[1076] Copying unknown Client property (ApplicationName='model.AppModule') to session
[1077] Copying unknown Client property (LastUsedConfiguration='AppModuleLocal') to session
[1078] Copying unknown Client property (password='*****') to session
[1079] Copying unknown Client property (JDBCDataSource='java:comp/env/jdbc/ConnectTo146DS') to session
[1080] Copying unknown Client property (jbo.jdbc.connectstring='jdbc:as400:/;naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false') to session
[1081] Copying unknown Client property (DBconnection='jdbc:as400://;naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false') to session
[1082] Copying unknown Client property (jbo.jdbc.password='*****') to session
[1083] }} finished loading BC4J properties
[1084] -----------------------------------------------------------
[1085] Connected to Oracle JBO Server - Version: 11.1.2.61.83
[1086] mPCollUsePMgr is false
[1087] ViewObjectImpl.mDefaultMaxRowsPerNode is 70
[1088] ViewObjectImpl.mDefaultMaxActiveNodes is 30
[1089] Default locking mode changed to: optimistic
[1090] Created root application module: 'model.AppModule'
[1091] Locale is: 'en_US'
[1092] ApplicationPoolImpl.resourceStateChanged wasn't release related. No notify invoked.
[1093] Trying connection: DataSource='oracle.jbo.server.ConnectionPoolDataSource@191d9ad'...
[1094] Using the oracle.jbo.server.ConnectionPoolDataSource to acquire a connection...
[1095] Creating a new pool resource
[1096] Trying connection/3: url='jdbc:as400:/*****' user='TESTER' password='*****' ...
[1097] DBTransactionImpl.initTransaction: Login failed
[1098] java.sql.SQLException: No suitable driver found for jdbc:as400:;naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false
     at java.sql.DriverManager.getConnection(DriverManager.java:602)
     at java.sql.DriverManager.getConnection(DriverManager.java:185)
     at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:187)
     at oracle.jbo.server.URLConnectionHelper.getConnectionFromDriver(URLConnectionHelper.java:50)
     at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:195)
     at oracle.jbo.server.ConnectionPool.instantiateResource(ConnectionPool.java:166)
     at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:580)
     at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:313)
     at oracle.jbo.server.ConnectionPool.getConnectionInternal(ConnectionPool.java:102)
     at oracle.jbo.server.ConnectionPool.getConnection(ConnectionPool.java:66)
     at oracle.jbo.server.ConnectionPoolManagerImpl.getConnection(ConnectionPoolManagerImpl.java:52)
     at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:172)
     at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:45)
     at oracle.jbo.server.ConnectionPoolDataSource.getConnection(ConnectionPoolDataSource.java:72)
     at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:964)
     at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1147)
     at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6838)
     at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:298)
     at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:329)
     at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:203)
     at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:600)
     at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:417)
     at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9021)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4606)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2536)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2346)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3245)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:571)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:504)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:499)
     at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:517)
     at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:867)
     at oracle.jbo.jbotester.binding.TesterBinding.getConnectionInfo(TesterBinding.java:222)
     at oracle.jbo.jbotester.MainFrame.initializeDataControl(MainFrame.java:945)
     at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:646)
     at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:612)
     at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:446)
[1099] A dead application module instance was detected
[1100] The application module instance was removed from the pool
[1101] ApplicationPoolImpl.resourceStateChanged wasn't release related. No notify invoked.
[1102] Resetting AM=AppModule
[1103] An exception occured during checkout.
[1104] oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
     at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:207)
     at oracle.jbo.server.ConnectionPool.instantiateResource(ConnectionPool.java:166)
     at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:580)
     at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:313)
     at oracle.jbo.server.ConnectionPool.getConnectionInternal(ConnectionPool.java:102)
     at oracle.jbo.server.ConnectionPool.getConnection(ConnectionPool.java:66)
     at oracle.jbo.server.ConnectionPoolManagerImpl.getConnection(ConnectionPoolManagerImpl.java:52)
     at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:172)
     at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:45)
     at oracle.jbo.server.ConnectionPoolDataSource.getConnection(ConnectionPoolDataSource.java:72)
     at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:964)
     at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1147)
     at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6838)
     at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:298)
     at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:329)
     at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:203)
     at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:600)
     at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:417)
     at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9021)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4606)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2536)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2346)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3245)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:571)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:504)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:499)
     at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:517)
     at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:867)
     at oracle.jbo.jbotester.binding.TesterBinding.getConnectionInfo(TesterBinding.java:222)
     at oracle.jbo.jbotester.MainFrame.initializeDataControl(MainFrame.java:945)
     at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:646)
     at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:612)
     at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:446)
Caused by: java.sql.SQLException: No suitable driver found for jdbc:as400://naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false
     at java.sql.DriverManager.getConnection(DriverManager.java:602)
     at java.sql.DriverManager.getConnection(DriverManager.java:185)
     at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:187)
     at oracle.jbo.server.URLConnectionHelper.getConnectionFromDriver(URLConnectionHelper.java:50)
     at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:195)
     ... 32 more
[1105] JUErrorHandlerDlg.reportException(oracle.jbo.jbotester.ErrorHandler$ExceptionWrapper)
[1106] UIMessageBundle (language base) being initialized
Jun 12, 2012 4:38:26 PM oracle.jbo.jbotester.MainFrame exit
INFO: BC4J Tester exit code(-3)
Process exited with exit code -3.

When you use DB2 SQL flavor, the ADF BC use the oracle.jbo.server.DB2SQLBuilderImpl class as an SQLBuilder. This class determines the JDBC driver class name as follows:
1) If the JBO configuration parameter jbo.sql92.JdbcDriverClass in not empty, then the JDBC driver class name is taken from there;
2) If the jbo.sql92JdbcDriverClass parameter is empty, then:
<ul><li>If the JDBC URL starts with "jdbc:db2://", then com.ibm.db2.jcc.DB2Driver
<li>If the JDBC URL starts with "jdbc:oracle:db2", then com.oracle.ias.jdbc.db2.DB2Driver
<li>If the JDBC URL starts with "jdbc:datadirect:db2", then com.ddtek.jdbc.db2.DB2Driver
<li>Otherwise, COM.ibm.db2.jdbc.app.DB2Driver</ul>
(Have a look at the source of the method DB2SQLBuilderImpl.getJDBCDriverClassName(String url) for more details).
It is seen from the log in your first post that the parameter jbo.sql92.JdbcDriverClass is empty. As far as your JDBC URL starts with neither of the prefixes specified above (e.g. your URL starts with "jdbc:as400://"), then you should specify the necessary JDBC driver class in the JBO configuration parameter jbo.sql92.JdbcDriverClass. (You can specify it in the AM configuration parameters or in adf-config.xml).
Dimitar

Building connection to com.ibm.lang.management MXBeans

Hello, I'm trying to build a jconsole-like application which is able to remote-monitor a jvm.. so far i've get it working for "every" sun-jvm..
now my boss wants me to monitor a ibm j9 jvm.. which doesn't work..
i have this simple test code:
    import java.io.IOException;
    import java.lang.management.ManagementFactory;
    import javax.management.MBeanServerConnection;
    import javax.management.remote.JMXConnector;
    import javax.management.remote.JMXConnectorFactory;
    import javax.management.remote.JMXServiceURL;
    import com.ibm.lang.management.MemoryMXBean;
    public class IBMConnection {
     public static void main(String[] args) throws IOException {
      JMXConnector jmxc;
      // create jmxserviceurl
      JMXServiceURL url = new JMXServiceURL("service:jmx:rmi:///jndi/rmi://"
        + "myhost:1234" + "/jmxrmi");
      // connect to jmx service running application with the jmxurl
      jmxc = JMXConnectorFactory.connect(url, null);
      // create MBeanServerConnection with jmxconnection
      MBeanServerConnection mbsc = jmxc.getMBeanServerConnection();
      MemoryMXBean ibmOSMXBean;
      ibmOSMXBean = ManagementFactory
        .newPlatformMXBeanProxy(mbsc, ManagementFactory.MEMORY_MXBEAN_NAME,
          MemoryMXBean.class);
      System.out.println(ibmOSMXBean.getMaxHeapSize());
    }i'm running the application on my local machine, (xp sp3, sun jre-6u16) and trying to connect to "myhost" (AIX 1 6 00CDAB5A4C00 running IBM J9 VM (build 2.3, J2RE 1.5.0 IBM J9 2.3 AIX ppc-32 j9vmap3223-20081129).
it works if i start the application on the aix machine and connect "remote" to itself, but if i am doing it real-remote it throws me this exception:
    Exception in thread "main" java.lang.IllegalArgumentException: java.lang:type=Memory is not a platform MXBean
     at java.lang.management.ManagementFactory.newPlatformMXBeanProxy(Unknown Source)
     at IBMConnection.main(IBMConnection.java:32)so i thought: okay, objectname incorret, and changed ManagementFactory.MEMORY_MXBEAN_NAME to "com.ibm:type=Memory" and "com.ibm.lang:type=Memory", but thatd didn't help neither...
i have found no information on how to connect remote to the ibm mxbeans... i'm pretty desperate atm..
there is no firewall, i used the fully qualified domain name of "myhost", the port is open and accessible (says nmap, and jconsole is able to connect to the app.), the application (which should be monitored) is started with the correct parameters..
i'm running eclipse 3.5 and i have imported the jlm.jar archive from the ibm eclipse-package.. i can see all the methods from the package, but i'm not able to call them remotely through an mbeanproxy... please help me

Thanks for the images - that clarifies things a bit.
MaxHeapSize is not part of the standard management interface of MemoryMXBean:
[http://java.sun.com/javase/6/docs/api/java/lang/management/MemoryMXBean.html|http://java.sun.com/javase/6/docs/api/java/lang/management/MemoryMXBean.html]
This is probably an OS/Vendor specific extension.
I do not understand why newPlatformMXBean gives you an exception - this is strange - and should
probably be reported as a bug to the implementor of that MBean.
To get the MaxHeapSize, I suggest you use
mbsc.getAtttribute(ObjectName, String /*property name*/) as I suggested earlier.
-- daniel
Edited by: dfuchs on Dec 7, 2009 4:51 PM

JMSClientExceptions:055142 when connecting to external IBM MQ Topic

I am attempting to send a message from my application residing on WL 10.3 to a topic on a IBM MQ 7 process running on another server. The application is Java/Spring, and the connection is actually working because I can debug it just before the send message and see the topic string from the MQ topic. However when I attempt to 'send' the message, I get the following:
weblogic.common.InvalidDestinationException: [JMSClientExceptions:055142}Foreign Destination, topic://my/topic
at weblogic.jms.common.Destination.checkDetinationType(Destination.java:105)
at weblogic.jms.client.JMSSession.setupJMSProducer(JMSSession.java:2830)
..etc.
The crux of the matter appears to be that weblogic is checking the destination type on this foreign service then throwing the error.
The topic is defined in WL as a destination within a foreign JMS server.
Is there an attribute I can set on this destination that will get me beyond this? Or some other solution?

Here's what I have. The connection strings came from IBM.
Foreign Servier Configuration
JNDI Initial Context Factory: com.ibm.mq.jms.context.WMQInitialContextFactory
JNDI Connection URL: <servierid>:1417/SYSTEM.DEF.SVRCONN
(my queue manager is running on 1417)
Foreign Destination
Name: TopicName
Local JNDI Name: MY.TOPIC
Remote JNDI Name: REMOTE_TOPIC
I see the topic string from the topic in the exception, so I know I have a connection, however I get this when I send:
(my exception stack trace)
caused by: weblogic.jms.common.InvalidDestinationException: JMSClientExceptions:055142] Foreign Destination, topic//(string from remote topic)
at weblogic.jms.common.Destination.checkDestinationType(Destination.java.105)
at weblogic.jms.client.JMSSession.setupJMSProducer(JMSSession.java.2830)
at weblogic.jms.client.JMSSession.createProducer(JMSSession.java.2858)
at weblogic.jms.client.JMSSession.createProducer(JMSSession.java.2822)
at weblogic.jms.client.WLSessionImpl.createProducer(WLSessionImpl.java.827)
at org.springframework.jms.core.JmsTemplate.doCreateProducer(JmsTemplate.java:971)
etc...

OSB to connect to DataQueue - IBM AS/400

Hi experts,
We are working on a critical POC to connect to DataQueue of IBM AS/400 from Oracle Service Bus. Any advice would be appreciated.
Thank you.
cheers,
Cipto

Can you give more details.
Is this DataQueue based areound MQ or JMS?

Directly connect UCS C-series to External storage

Hi,
I have a customer that is looking for an entry level data centre solution.
I have speced up 2 UCS C240 servers (with 10GB or 8GB FC) and I was wondering whether we can attach directly to external storage from the servers for now and buy a switch in the future.
As replication of their database is an issue, they would like to use external storage. The customer is looking at an IBM V7000. in the following URL -
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/interoperability/matrix/Matrix8.html the V7000 is compatible with the B-series but it's not listed under the C-series. Has anyone used the V7000 with the C-Series? Is there a better option for an entry level external storage array?
Any pointers or help would be much appreciated.
Cheers,
Georgia

Hello Georgia,
What is the HBA installed on the server ?
The matrix lists supported arrays only for Cisco CNA.
Padma

Connect UCS to Nexus

Hi,
I am adding UCS FI to our network, connect to a Nexus switch. our network has multiple isolate Vlans, and normal Vlans, that all need to be trunk to FI. On switch port, should I do normal trunk mode, or private-vlan trunk mode.
Thanks,

Hi
In general, all vlan's defined in a UCS domain are trunked on all Nortbound links, see
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116095-configure-ucs-upstream-port-channel-00.html
However, there is also the concept of disjoint vlan's, see
http://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/white_paper_c11-692008.html
Walter.

Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

When this problem first happened, I searched for threads and found a few. See be;ow links:
http://support.apple.com/kb/TS1502
Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

Connecting 6670 with IBM laptop (Ubuntu installed)...

Hi,
I am trying to connect my mobile 6670 with my laptop (Ubuntu installed) using bluetooth. The connection works one way; I can transfer files from laptop to mobile not other way around.
Error I have:
on mobile: 1)unable to connect 2) already have max number of connections second time I try
ANY IDEAS????????
/FAH

Use this .iso:
https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit
Next If you want to burn it to a DVD, just burn the iso to a DVD, and install Windows 8 from DVD.
Or use a liveUSB:
http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/
You may need to enable boot from USB in the BIOS if not already enabled.
NOTE: You won't be prompted for a product key during installation. Why? The product key is stored in the BIOS, and the correct Windows edition will be selected accordingly during installation.
Then after installation is finished all you need to do is installing drivers from support.lenovo.com. If you have no internet connectivity use a USB pendrive to transfer the drivers to your Y500.
You can always consider buying a recovery DVD from Lenovo for which you have to pay. Considering your knowledge this is not a bad idea. But if you are prepared to learn something, my guide above is something for you.
I can guarantee the .iso is safe to use, since I have been using that one myself. I always keep a back-up to help out friends.
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Oracle VM Server panic when I execute runInstaller

Hello,
I have an HP Blade BL680c G5 with 64Gb of RAM, with Oracle VM version 3.3.2-1074.
kernel on the Oracle VM server is 3.8.13-55.1.5.el6uek.x86_64
It is part of a server pool of other 3 same hw blades.
Storage is lun based, connected with an IBM DS4700 storage array.
I have an Oracle Linux 6.6 x86_64 vm (selinux disabled) with kernel 3.8.13-68.el6uek.x86_64
It is configured as a XEN_HVM_PV_DRIVERS vm with 2 cpu and 12Gb of ram.
I'm experimenting reproducible kernel panics.
Typically running runInstaller of Oracle 11.2.0.4 RDBMS (sometimes with yum commands).
You can find virtual console screenshots here of panic occurred just after runInstaller command was executed:
https://drive.google.com/file/d/0BwoPbcrMv8mvLXA2VEtTYVg1T1k/view?usp=sharing
https://drive.google.com/file/d/0BwoPbcrMv8mvNzNEeUV0akt5Qm8/view?usp=sharing
Any hints of the possible reasons and how to debug?
I have small size internal disk compared with the amount of ram so that I cannot make a local disk kdump.
Can I configure network dump as in usual ways for Oracle Linux 6.x servers? Or serial console can help?
It seems that inside /var/log/messages and /var/log/xen directory nothing useful to check when the server restarts.
Thanks in advance,
Gianluca

Nothing special inside the Readme.
You select: Oracle VM 3 Templates (OVF) for Oracle Linux 6 Media Pack for x86_64 (64 bit)
And then:
Oracle Linux 6 Update 6 template (OVF) - Hardware Virtualized with PV drivers x86_64 (64 bit) V73660-01
Inside the README for the two types of templates there is only this note about PVHVM:
The hardware virtualized template contains a kernel that is not recompiled for
the virtual environment, but contains additional paravirtualized (PV) drivers
for improved performance.
and some other notes and known issues that don't relate with the problems I'm having.
Note that also a simple "yum update" can cause sometimes the panic of the guest... possibly only related with my specific hw...
The original question was aimed also to see if anyone else using PVHVM guests without problems or not in general with Oracle Linux 6.
Thanks,
Gianluca

UCS servers with IBM's TotalStorage SAN16B-2 SAN Switch

Hi Experts,
We have IBM TotalStorage SAN16B-2 SAN Switch, & cisco UCS 6120 Fabric Interconnect, dint find any document for compatibilty between this.
This is a SAN switch with each port capable of delivering a throughput of up to 4 gbps.
Can we use this SAN switch to connect ucs Fabric interconnect????
Thanks,
Mazhar

As long as the switch supports NPIV it should be fine.
Regards,
Robert

UCS connected to multiple FC fabrics?

Hi,
I *think* it is possible, yet I cannot find any diagram / documentation confirming this:
Is it OK to connect UCS Fabric Interconnect modules to more than one FC fabric? (namely 2 Brocade fabrics per module?)
Am I correct in my thinking that creating separate VSANs for each fabric should do the trick?
Thanks & regards,
Radek

Radek, yes it is possible. I did this recently at one of my customers, we connected a Brocade and QLogic fabric to both UCS FIs. We put the Brocade FC ports and vHBAs in one VSAN and he QLogic in the other. It was very cool because this allowed the customer to access both fabric from a single serer without having to ISL the 2 fabric together.

Connecting UCS to IBM DS4700, FC zoning

Similar Messages

Maybe you are looking for