Connection between the ACR122U card reader and an emulated card is failed
Hello,
I write a code to connect the ACR122U card reader and a host-based card emulation on my android 4,4 phone that act as a card. When I run a code, I got this error:
javax.smartcardio.CardException: connect() failed
at sun.security.smartcardio.TerminalImpl.connect(Unknown Source)
at HostCardEmulationCardScanner.run(HostCardEmulationCardScanner.java:18)
at POS$11.actionPerformed(POS.java:567)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
Caused by: sun.security.smartcardio.PCSCException: SCARD_E_SHARING_VIOLATION
at sun.security.smartcardio.PCSC.SCardConnect(Native Method)
at sun.security.smartcardio.CardImpl.<init>(Unknown Source)
... 39 more
what does the "SCARD_E_SHARING_VIOLATION" means?
these are my code line that the error tell:
For POS.java,
@SuppressWarnings("deprecation")
CardTerminal cardTerminal = TerminalUtils.getAvailableTerminal().getCardTerminal();
HostCardEmulationCardScanner cardScanner = new HostCardEmulationCardScanner(cardTerminal);
cardScanner.run();
For HostCardEmulationCardScanne.java
Card card = cardTerminal.connect("direct");
ApduTagReaderWriter readerWriter = new ApduTagReaderWriter(new AcsDirectChannelTag(TagType.ISO_DEP,
null, card));
OK
It's been awile but, I'am sure that we could only
print an index from a card them print photo with that
sys. The G3 was 8.6 upgraded to 9.2 with Photo Shop.
Option was just a thought.
Dennis
Sorry for answering my own question kinda of. I just got my first IMac 3 weeks ago so I am still learning and exploring how to do stuff on my IMac.
Nope in Windows XP it mounts as a network HD under "my computer" and you can copy files to and from any of the cards in printer card reader. It even shows up fine under paralles as network HD drive letter Z:. Does not matter if the printer is connected via USB or Ethernet.
Btw after my first post I started to play with it. I figure a way to manually mount Hp printer's card readers confirmed to work on 2 different printers models Laserjet 2840 and Photosmart 3310. This trick only seems to work if you have your printer connected via ethernet tho. Goto the "Finder" then "Go" then "Connect to a server" and enter "cifs://IP of your printer" dont enter the quote and replace ip of your printer with the ip address of your printer. Btw you must remove the PW protect from printer for this to work. Not sure why if you have a password why it will not work.
So if this work around works to manually mount the card reader in OS X is their a way to make a script or a short cut for mounting the card reader without going and entering the IP of the printer every time I want to use the card reader?
Similar Messages
-
CA-1000. How to connect between the TTL 3.3v to 5.0 v pullup circuit and the J-series ports
I open the CA-1000 and trying to configure the wire similar to the attached diagram.
But I have trouble figuring out where are the DIO 8, 9, 10, 11, ... because there is no label in the flexible flat wire connected between the J-series ports and the pullup circuit (I think the orange circuit board is the one). Please see the picture attached.
Also, what is the yellow block plug into the pullup circuit? Is there any special alignment between this yellow one and the pins on the black head?
Hi longbelao,
We may need to clear a few things up before we work on the connection diagram you have.
The best way to determine the pins on the ribbon cable would most likely be to use a DMM. Could you also clarify where you are connecting the ribbon cable?
From my understanding of your pictures, the orance circuit board is just a breadboard for you to build your circuit from the connection diagram you have. When you are discussing the "yellow block" are you talking about the SIP resistor? If so, this is just a pack of resistors you can use for your circuit. Also, the 8x2 breakout for your 16 pin ribbon cable will not work in the breadboard. The rows of 5 holes are connected in series. Putting the connector in the breadboard would short the pins together. However, if this cable is only connected to D8 through D-15 this may not be an issue. Again further clarification on where the other end of the ribbon cable would be helpful for further understanding your hardware set-up. -
Wireless connection between D-Link WiFi router and Time capsule stopped working
We have an ISP provided D-Link wireless router (DIR-615) to which we wirelessly connected our 2Tb Time Capsule for back up and to connect a USB printer to out network. This worked perfectly for 3 1/2 years, until about a month ago, when the time capsule suddenly decided to go "off line". ie we could no longer access it or the printer via our wireless network. We had changed nothing - just one day it stopped working.
We tried to get it back online with no success. As the 2Tb Time Capsule was almost 7 years old and had had some HDD issues in the passed, we figured it had got old and died and that it was time to replace it; so we bought a new 3Tb Time Capsule, thinking this would get everything back to normal.
However much as we tried, we were also unable to get the new 3Tb Time Capsule to connect wirelessly to the D-Link wireless router. The Airport Utility did not show the D-Link wireless router or its wireless network, although we were (and are) able to see it in Systems Preferences>Networks from all our multiple devises. This in itself seemed odd. No matter what we tried, the Airport Utility would not find the D-Link wireless router and hence we could not add the 3Tb Time Capsule to the existing wireless network.
At the end of the day we got fed up with trying to add the 3Tb Time Capsule to the D-Link wireless network, and connected it via a LAN cable to the D-Link router instead. We then set it up as its own network. Worked gerat. Having done that we thought maybe the old 2Tb Time Capsule might not have been the problem after all, so we tried extending our new 3Tb Time Capsule wireless network using the 2Tb Time Capsule wirelessly. This worked perfectly! And we are now almost back to what we wanted.
So although we have a work around, this means now have 2 separate wireless networks as opposed to the original single wireless network where everything talked to everything else.
Can anyone shed any light on any of the following:-
1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
A firmware update to the TC came along and you agreed to it without perhaps even noticing.. it then smashed your setup because Apple do not recommend the setup you were using and it is very poor.
2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
Because it is such a poor setup that Apple have taken away your ability to choose it unless you know exactly what you are doing.
3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?
Yes, this I can help you with.
I have several ways around the problem.. but the first one is.. why use the DIR-615 at all.. it is not a modem.. it is a very ordinary bottom end, poor single band slow wireless router.
Why don't you simply remove the DIR-615 from the network completely.. plug whatever it is the ISP supplies you.. an ethernet connection from whatever that modem is you mentioned into the WAN port of the Time Capsule. And use the TC in some router mode.. same as the DIR-615 was setup.. dhcp or pppoe or whatever.. I doubt the TC cannot match it.
If you have issues please post a few screenshots from the DIR-615 to show how it is setup from the WAN side.. and as long as you are given the username and password or whatever the ISP uses to authenticate then chuck out the DIR-615.
Tell me if that is a goer.. if not we can work out a few other methods..
eg. Simply turn off the wireless in the DIR-615. It is poor cf the TC and there is no need for it.. with the TC in bridge only use the TC for wireless as well as wireless extend with your old TC.
Or setup roaming network where everything uses the same SSID.
Then you will have one wireless network. And it won't matter what as long as it connects.. although IMHO this is not right as the TC is such a superior router now you are wasting your new TC. -
Web Acceleration Client Error (513) - Internal Error
The Web Acceleration Client detected an internal error which caused the connection between the Web Acceleration Client and Web Acceleration Server to be broken. Retrying the web page may correct the problem.
I get this error continuously when working in the ancestry.com website. I have to reload the page on almost every search I do on that website. This is the ONLY website that I get this error message on, can work continuously for several hours on other websites and never get this message. I've talked to the people at Ancestry.com support and they made 2 recommendations: turn of antivirus (did not help) or switch to another web browser. I tried both IE 11 and Chrome Version 31.0.1650.63 m and I did not have the problem with either of those 2 browsers getting this error.
Is there a problem with how Firefox and ancestry.com are communicating with each other?Hello byron.lewis, many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Can't establish wireless connection between the printer and computer.
I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.
Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks, -
Is there a connection between the performance and the number of photos?
Is there a connection between the performance of LR 4 (LR 5) and the number of photos in the catalog? Will it slow down LR with a directory of more than 40,000 images (Win7, 4 Gb RAM)?
I use lots of smart and dumb collections, lots of keywords too, also on Win7/64 though with 12Gb of Ram.
Have you read through Optimizing performance, especially running a File > Optimize. Also Performance hints is more handy for troubleshooting.
John -
after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?
The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3. -
The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.
Hi BillCilla,
If you are having intermittent but persistent drops in AirTunes via your AirPort Express, you may find the following article helpful:
Apple Support: AirTunes audio stream drops or cuts out
http://support.apple.com/kb/ta21538
Regards,
- Brenden -
Differences Between The Asus P67 EVO And Pro?
Anyone know of the differences between the Asus P67 EVO and the Pro?
I want to buy an Asus P67 Pro Motherboard today, but there are only 2 left at Fry's and they are both open-box returns and the other Fry's has only 6 left and ALL are open-box returns. So I'm thinking there may be an issue with the Pro's?
Is the EVO just as good?
On the Asus site specs, it seems the only differences are:
(and I'm not sure what any of the following means)
-On the Pro, the PCIe x16-3 slot shares bandwidth with the ESATA12
-On the EVO, the PCIe x16-3 slot shares bandwidth with the ESATA3G and the PESATA3G
-The EVO has dual LAN's
-The EVO has a CMOS Switch
-The Pro has the "System Panel" Q-Connector
Adobe seems to be heading towards allowing 2 video cards.
Would the EVO limit me if this happens?
I notice there's only one EVO on the PPBM5 site in the upper realms (Novak).
There seems to be more Pro's.
I don't plan on doing huge overclocking, maybe minor.
Components to be used:
-i7 2600K
-Corsair Vengeance 16GB
-Corsair AX 850 Watt Gold
-EVGA GTX 460 1GB Superclocked
-OCZ Agility 3 SSD 120GB
-Seagate Barracuda 3GB Storage
-Seagate Barracuda 1GB for Exports, Page File, Previews, Media Cache
-Seagate Barracuda 3GB Storage in Acomdata Samba External Enclosure for Backup
-WD My Book 3GB External for Another Backup
Any help would be appreciated.
Thanks Guys.addiZ wrote:
I'm going to use my MacBook mainly for gaming and editing videos
Don't get the 13". It only has an integrated video card. Both the 15" and 17" models have an integrated as well as a dedicated video card. -
As posted previously, my time capsule will not set up properly because I get an IP address conflict pop up window. Is there a difference between the "Ethernet WAN Port" and the other three ports on the back of the Time Capsule? I may have the DSL modem hooked into the "Ethernet WAN Port". Thanks.
it depends what you want to achieve and what configuration you have on your DSL modem/router.
Resetting TC and run connection wizard from the Airport utility.
Post the problems. -
I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
- 1920x1080 sq pix (16:9)
- 25 fps
- my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef -
So I am trying to connect my ipod to my itunes So I can transfer music from CDS I have on to my ipod...The ipod says it's connected to the computer,But itunes and my conputer do not register my ipod is connected...I have trierd to update and reintalinng it and still not working...Anyone wanna help me please
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
-
Communication between the DNS/DHCP Manager and OES Server
No communication between the DNS/DHCP Manager Console and OES server (status,start,stop)
The screenshot shows the tab "DHCP (OES Linux)" in the DNS / DHCP Manager console
in the bottom of the image it shows the state of the DHCP servers.
allDHCP.JPG
The dhcp service is started on all these servers
You can see that the status is known only for four servers.
The button "start/stop DHCP service" works fine on this servers and
the dhcp service can be canceled and also restarted
But the status of the "dhcp service" is not recognized for all the other DHCP servers
and so we can not start or stop dhcp service on these servers.
All servers were installed at different times (last three years) with OES11 and
are upgraded to OES11SP2 with all patches.
The server keto (DHCP_keto) is a new installation OES11SP2 few days ago.
All OES servers were set up identically from me. LDAP, LUM, DMS, DHCP works fine.
Which service on the OES server is responsible for
communication (status indicator) between the DNS/DHCP Manager and the OES serve?
How the status query is performed by the DNS/DHCP Manager?
How can I test the communication to the server on the client (console)?
Which configurationfiles I should be compare on the server?
Thanks in advance
Gernotgernot,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com -
Help
I dont understand when i download a movie or tv series on my mac book air i get this error message after buying it! its iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!Hello.
Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
Information about error -50 and downloading videos
http://support.apple.com/kb/TS1583
If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273.
Maybe you are looking for
-
Any one knows how to change "TransptnPlanng date" in delivery document?
Deal All, Could any one provide the BAPI/FM that can change "TransptnPlanng" date/time in inbound/outbound delivery documents? I need to update the dates only in ABAP program based on external information. I tried WS_DELIVERY_UPDATE with the followin
-
I've recently tried to restore my IPhone4. For some reason, its not working properly (i.e my phone won't come out of restore). I've already restarted my computer, and created a new user account on my computer.The message that keeps popping up says Er
-
Why i can't open my hotmail with iphone but safari and laptop can open
Why i can't open my hotmail with iphone but safari and laptop can open why???
-
Hi, I have a JFrame, it displays on the right upper corner the icons minimize, maximize and exit. Minimize and Exit icons are working fine. I have the problem with the maximize button. The application I am writing allows to resize the JFrame. Thats f
-
Getting Message "the code you entered is invalid. Please try again" when entering serial number.
I keep getting the message "The code you entered is invalid. Please try again" when I enter my serial number. My hard-drive/computer was completely wiped but I bought Adobe CS and still have my proof of purchase. I am unable to redeem my purchase and