Connection issue in MS access throught labview

Hello,
I am using MS Access 2010 and Labview 2012. when I am running vi of Create table and insert column but I am getting a repetitive error which is shown in images.
Please help me resolve this problem.
Solved!
Go to Solution.
Attachments:
Error block diagram.png ‏236 KB
Error.png ‏221 KB

Hello,
I am trying to create the new table in MS Access through LabVIEW. In that table, I want to insert the array of data in the at data terminal.but error displays repetitive which shown in attached image. what can I do to resolve this error .
In MS Access, I want to do numbers of records under one field name(Array of data). and that is for more than one fields.
Attachments:
Array Error BD.png ‏229 KB
Array Error front panel.png ‏219 KB

Similar Messages

G4 (10.4.11) airport (9.52) wifi connectivity issue w WPA access point

I am struggling to resolve a wi-fi connectivity issue between a G4 imac with airport card and a netgear wireless-n access point.
The set up is as follows - the broadband comes into a Netgear router (DG834Gv5)which my Intel imac connects wirelessly to. Two daughter's den is away downstairs so I run an ethernet cable from the main netgear router to a netgear Pro-safe wireless access point (WNAP210) as an extender (we live on a houseboat so there are metal bulkheads and the like inbetween.
In the den older daughters G5 wirelessly connects to the Netgear access point easily through a WPA-PSK connection.
Younger daughters G4 running 10.4.11, with original airport card running firmware 9.52 (airport admin utility 4.2) refuses with the 'wrong password' error (it isn't - I have checked 50x) or sometimes just 'there was an error joining'.
It can see the network strongly (the airport menubar icon goes full, then cuts, then flashes on, then drops) but refuses any traffic.
This G4 can however connect, weakly, with my upstairs router which is also WPA-PSK protected (same password)!
I have read all the forums on this and despite some non-expert posts muddling the issue I believe that this SHOULD be possible. Not WPA2 I know but basic WPA.
In addition the options in the netgear extender are b&g (like upstairs which works), g or n. So I have selected b&g - no difference.
Currently I have had to set a separate channel for her and leave it unsecured which isn't a long term option (I am just hoping that even the cleverest war-driver cant sneak in through the extender, back up to the traffic between my Intel and the main router !!?)
Can anyone suggest what I might be missing in the conjuration (sic, ahem) configuration settings either on the G4 or the Netgear box ?
Is it enough to turn the broadcasting of the open channel name off and so render it invisible ?
Thanks in advance for any expert person's attention

hi kathryn
did it have to be the Telekom, by all means??
anyway, first of all a link to a video where a german comedian writes a letter to steve jobs demanding he chose any carrier but the DTAG for the iPhone distribution in germany - really funny!
http://bit.ly/4B4OdQ
OK, I´m currently downloading the speedport manual from their website and will look through it, in order to see if there´s something in there..
as a first guess I´d try looking at the wireless prefs of that speedport box. I guess it supports by default 802.11a/b/g, whereas the G4 only does 802.11b (the "normal" airport). Try selecting only the 802.11b portion from the speedport (that makes networking somewhat slower for airport express computers, but shoudn´t be a problem since it´s still at least as fast as basic DSL service (11MBit vs 2 or 6 MBit)
cheers
Matt
(german in spain)

Access Connection Issues

Hello;
I have read about many issues here with Access Connections software. I have yet to put my new system on the Wi-Fi so I don't know if I will have those issues or not. I will be doing that tomorrow. The reason for the delay is I have a managed system where visitors get a coupon and have to create an account and log in with there coupon code. As an administrator of the system for me I just need to have them put my MAC on the preferred list and not log in required ever.
Anyway what I am here for is I noticed that most of the time when I boot my computer the access connection icons in the notification area (sys tray) do not appear. They are set to appear but do not about 80% of the time.
If you open access manager and go to global settings and untic to show the icons then tic them back on they appear.
Anyone ever seen this?
Also if I should decide to remove Access manager from my system will it harm any of the other Lenovo software?
I am very well aware how to disable file and printer sharing when I connect to certain networks.
Thanks
Vince

Welcome to the forum!
You're probably not getting many answers to your questions because much of this has been hashed over many times already not only here but also at TPF and NBR .
Have you tried doing a clean install picking and choosing which of the preloaded apps you need? I believe the recovery disks have the option to choose what gets re-installed. Or there's the XP Clean Install Guide from NBR There's a similar one at TPF although I can't seem to find the link right now. Use the ThinkVantage Software Guide to help you decide what you want to reinstall.
Hope this helps!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

HP PhotoSmart 7510 suddenly has severe connectivity issues

I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
I tried the following steps from one of the threads:
1. Restore the Network defaults
2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
6. Try enabling Web Services.
I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
Thanks a lot!

I can assure you that it is not a router issue. It appears to me that it is a driver compatibility with Windows OS. After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.
The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch). But that leaves us 32-bit people stuck with the current driver which does not work.
The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made). The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue. However, the affected computer fails pings by either request timed out, or destination host unreachable. Pings are successful from the affected computer to any other device on the network. The only way to recover (at least for a few days) is to reboot the affected computer.
Also, from the display on the 7525, the network tests pass without issue. I can also download and print content from the internet with no issues.
Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request. This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...). I agree with several other customers that HP should be on the hook for this fix. I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
Thank you in advance for escalating this issue to product engineering,
S. Hunn
There are 10 kinds of people in this world... Those who understand binary and those who do not.

Excel ODBC Connection Issues

I'm having some issues importing external data from an Oracle 9i database.
Here is what is happening:
I am initially able to import data from the table I want to into Excel.
I do this through "Data -> Import External Data -> New Database Query" where I have my .ORA data source. I'm able to log in using my user and password and import the table. My problems come after I import this first set of data.
If I try to "Edit Query…" I get an error box that says "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
If I try to "Refresh Data" I get two error boxes. The first is just: "[Microsoft][ODBC driver for Oracle][Oracle]" and the next says: "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed". It then prompts me for the User name and password of the DB I'm connecting and after I enter the information, I get the same two error messages.
Also, if I attempt to establish another connection following the "Data -> Import External Data…" steps I run into a different problem. Upon entering the information for the User Name and password prompt I get two error messages. One says "!" and the next box says "Couldn't read this file". Once I click "OK" in those boxes, the Microsoft Query window automatically opens with nothing in it.
I can't seem to figure out why I can initially pull down data and then cannot succeed afterwards. I'm unable to connect to the DB I have through Excel until I completely closed all Microsoft Excel instances.
I also use this data source in Microsoft Access without any problems.
My Excel version is 2003.
I'm using Oracle Drivers I'm using are from an "Instant Client" package.
Any thoughts why I'm having these connections issues?
Thanks in advance.

This issue is closed.
The solution was:
"Data -> Import External Data -> Import Data"
Select "New Source" and select the "Oracle" data source and filled in the appropriate information. This was similar to the database query but it actually works.

Connection issues with EA4500

I had bad connection issues with my mobile device, so i pressed reset on my EA4500 router, and now when i connect to my network, it gives my limited connection even though i have 5 bars of signal. Not sure what to do now...

Resetting the router will erase all the settings you configured on the router since the initial setup. You manually configure the router's wireless settings so your wireless devices can have internet access again.
Procedure: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&...
Make sure to use a computer that is hardwired via Ethernet cable to the router.
For bad connection issues: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cf6ed888ce144d06905af4987887fd1b_KBxxxx_EN_v1.xml&...

X1 Carbon (20AX series) wifi connectivity issues

Dear Lenovo Support and all others,
I am posting this in hope that someone can help with my problem and also to share my unpleasant experience with a new Lenovo product.
Lenovo Thinkpad X1 Carbon
Model: 20A8A00VSG
OS: Windows 7 Pro 64bit
Purchase date: 27th February 2014
Since the first day I purchased the system, I have been having an issue with my wireless connection:
1. I am unable to reliably get a wireless connection to wireless access points (e.g. free wifi coffee outlets or malls) and personal mobile hotspots (mobile phone hotspots). It constantly says "LIMITED CONNECTIVITY". In other words, I cannot get internet access. Even when it does connect to the network and get internet access, there is a tendency for the connection to drop back to "LIMITED CONNECTIVITY".
The only time I can get a reliable connection is when I am connected to my home wireless router. The system does not seem to have problems on home wifi networks. Since the problem seems limited to wireless access points and hotspots, I believe its a hardware/software problem.
Please note that I have other wireless devices (laptops and mobile phones) that can connect to the same networks that I am trying to connect to and have no issues.
I have tested the networks with my friends' wireless devices as well and they have no issues accessing the internet so I am fairly certain that there is no issue with the networks themselves.
2. I have already called in twice and been given advice on both occasions but the problem still persist. I have updated all drivers, uninstalled and reinstalled and updated the BIOS for the system and also performed a system recovery but nothing has worked so far.
I have also tried disabling and/or deleting any anti-virus software and firewalls but it does not fix the problem.
I have also been advised that I need to go down to the Lenovo service center to have my laptop checked out by the technicians and that there MIGHT be a firmware upgrade for the wireless card itself.
NOTE: MIGHT? The support staff doesn't even know for sure whether there is an upgrade available.
3. Rebooting my computer, the wireless card or the hotspots does not solve the problem. It might work for a shortwhile before it reverts back to it's non working state or stops working again once I reboot the system.
I am really unhappy with the purchase so far. It's actually a good laptop per se when all is working, but without internet access, it is pretty much like a dead fish. And thats 90% of the time.
Like I said, this problem has been happening since day one and I've tolerated it long enough.
I hope someone can help me with this problem.
Thanks all.
UPDATE - 3/24/2014
I borrowed an ASUS Wireless USB adapter from a friend and installed it on the laptop. Lo and behold there are no connectivity issues to my iPhone wireless hotspot.
INTEL DUAL BAND WIRELESS AC 7260 - NO CONNECTION/LIMITED ACCESS
ASUS USB N10 WIRELESS ADAPTOR - CONNECTIVITY AND INTERNET ACCESS
I think this narrows it down to the software/hardware in the computer....

Hi, all
there is an issue bugged driver or even card firmware related. Intel confirmed that. Wait some time for the new release.
For the test purpose only disable 2,4 ghz band support and switch to 5 ghz. N-band seems unstable so switch to G-band. As the Linux users report the same issue it's firmware bug basically.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

My MacBook Air has recently started having substantial WiFi connectivity issues. How do I fix this?

For the last couple weeks my MacBook Air has started having some mighty substantial connectivity issues.
When I wake it from sleep, or if I'm using it for an extended period (say, more than 5-10 minutes), the connection will become extremely unreliable. This primarily happens with browsers, or the Twitter application. For example, if I start a call on Skype the call will continue to function just fine, but I won't be able to connect to any websites through any browser. I've tried Safari, Chrome, and Firefox while the connectivity problems are occuring. When they do occur, a full shut down and cold boot are required to make it work again for a short while.
Does anyone know what might be causing this? I've done numerous checks for malware using Clam Xav and Sophos Anti-Virus. (I didn't suspect that this would be the issue, but it was still something that I decided to rule out.) Additionally, I've tried connecting using both the 2.4GHz and 5GHz bands on my wireless router. Neither seems to be more successful than the other. (Note: The 5GHz works perfectly and without interruption on my iPad and desktop PC. The 2.4GHz works perfectly with my iPhone 4S and Xbox 360. I feel that with that in mind, I can safely rule out the router as the root of the problem. Both of these examples go on for very extended periods of time. I game regularly using both my PC and Xbox 360.)

Hi Jollified,
Does your sound work when you try to use head/earphones? If so, try the following:
Plug your Headphones into your Mac.
Play a sound through them (a song for example), then stop the sound.
Make sure 'Preferences' is isn't open. If it is, Quit.
Launch System Preferences > Sounds.
While the Sounds tab is open and set to 'Headphones', pull out the Headphones from the jack.
You should see your Mac reset to 'Internal Speakers'
Also, I see you have tried resetting the PRAM, have you tried resetting the System Management Controller (SMC)? Resetting the System Management Controller (SMC) on your Mac - Apple Support
As for your MacBook not sleeping when you close the lid, there are many reasons this can occur.
First of all, check out Apples article on the issue: OS X Yosemite: If your Mac won’t go to or stay in sleep If you find these steps don't help, try a few of the following:
A common cause for the Mac not sleeping is your printer. If there are queued jobs waiting to be printed, but your printer is switched off, for some reason you Mac just wont like it and simply will not go to sleep. System Preferences > Print and Scan > Open Print Queue
Do you have an Ethernet Cable connected? People have reported in the past that removing their Ethernet allowed their Mac to sleep. This goes for other things you may have connected directly to your Mac also.
Try heading into your Mac Preferences > Sharing and deselecting 'Internet Sharing' as well as 'Printer Sharing'.
Also deselect Wake For Network Access by heading to System Preferences > Energy Saver > Power Adapter > Wake For Network Access.
Energy Saver > Schedule > Startup or Wake - Uncheck.
Alternatively, set your system preferences to Never Sleep, and put into Sleep manually: System Preferences > Energy Saver > Computer Sleep > Never.
Good luck!

Remote Desktop Connection Issue

Hello,
We have an issue where our reception computer has 4 RDP connections set up to access 4 other desktops in the office. The connections seem to lose some sort of connection settings periodically as when we try to launch the connections they fail. They
come up with the error of the three reasons you may not be able to connect. We have gone in and tried to connect by ip but that did not work either. We have been able to get it back and working if we rebind the computers to the domain but it seems to only
work for a short time before we have to do this again. Now another interesting thing is that we can go to one of the other desktops and connect from it to the reception computer but it for some reason will not work the other way around. We have tried configuring
the windows firewall as well as the eset firewall that is used for out Anti Virus software but nothing there seems to work. The rebinding is a temp fix but would like to try and find a permanent fix. We can remote in to some other desktops on the same network
as well from the reception computer but for some reason it has issues with these 4 computers. We also have set up all the permissions to allow access . We do not want to use a third party remote software to do this we would like to use the software that has
been provided through the operating system.
Thanks,
Zach Hartman

Hello,
We started by computer name and then tried IP address. The computers in the office have all been assigned Static IPs and it still happens. This issue does not happen at a specific time or interval and just happens when
it feels like it. It could work for a day and then stop or it could work for a month and stop. We have found that rebinding to the domain somehow temporarily resolves the issue. I looked into any group policies that could be causing an issue but we have not
of the group policies that affect RDP configured so that can pretty much be ruled out. The error We receive is as followed: "Remote
desktop can't connect to the remote computer for one of these reasons:
1) Remote access to the server is not enabled
2) The remote computer is turned off
3) The remote computer is not available on the network
Make sure the remote computer is turned on and connected to the network,
and that remote access is enabled."
Like I said rebinding to the domain temporarily resolves it but would be nice to find a permanent solution.
Thanks in Advanced for any help
Zach

IPad2, Verizon 3G, VPN Connectivity Issues

Greetings all. I am the systems administrator for my corporation and have seen an issue that I wish to present to the community for discussion.
For those enterprise users that have an iPad2 with Verizons 3G, are you experiencing connectivity issues while trying to connect to your VPNs from the 3G network? If so, have you found any work around to allow connectivity or does it work fine for you?
Here's a summary of my issues:
We have a VPN server built on Debian Linux that has been in operation for over four years. It handles remote VPN connections from Windows, Linux, Android, OS X, iOS, and from many different devices including multiple flavors of Apple products (iMacs, Minis, MacBooks, iPads, etc.). To date, it has performed flawlessly with assorted devices connecting to it through broadband and assorted 3G networks.
Recently I purchased an iPad2 with Verizon 3G. I was able to set up the VPN connection using PPTP and connect using a Wi-Fi connection. When I turned off the Wi-Fi and attempted the same connection via Verizon 3G, it fails. I then took an associates iPad1 using AT&T 3G, set up the same connection, and was able to connect. I don't have access to an iPad2 on AT&T 3G so, I can't speak for that.
Here's the logs from the VPN server while connecting from my iPad2:
Wi-Fi
Jul 27 05:20:43 localhost pppd[31694]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded.
Jul 27 05:20:43 localhost pppd[31694]: pptpd-logwtmp: $Version$
Jul 27 05:20:43 localhost pppd[31694]: pppd 2.4.4 started by root, uid 0
Jul 27 05:20:43 localhost pppd[31694]: Using interface ppp2
Jul 27 05:20:43 localhost pppd[31694]: Connect: ppp2 <--> /dev/pts/4
Jul 27 05:20:46 localhost pppd[31694]: Unsupported protocol 'IPv6 Control Protocol' (0x8057) received
Jul 27 05:20:46 localhost pppd[31694]: found interface eth1 for proxy arp
Jul 27 05:20:46 localhost pppd[31694]: local IP address 192.168.1.69
Jul 27 05:20:46 localhost pppd[31694]: remote IP address 192.168.1.82
Jul 27 05:20:46 localhost pppd[31694]: pptpd-logwtmp.so ip-up ppp2 scott XXX.XXX.XXX.XXX (removed external IP for security reasons)
Quick connect, able to utilize VPN connection normally. No issues.
Verizon 3G
Jul 27 05:20:29 localhost pppd[31682]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded.
Jul 27 05:20:29 localhost pppd[31682]: pptpd-logwtmp: $Version$
Jul 27 05:20:29 localhost pppd[31682]: pppd 2.4.4 started by root, uid 0
Jul 27 05:20:29 localhost pppd[31682]: Using interface ppp2
Jul 27 05:20:29 localhost pppd[31682]: Connect: ppp2 <--> /dev/pts/4
Jul 27 05:20:32 localhost pppd[31682]: peer refused to authenticate: terminating link
Jul 27 05:20:33 localhost pppd[31682]: Connection terminated.
Jul 27 05:20:33 localhost pppd[31682]: Exit.
As you can see, the peer refuses to authenticate causing the link to be terminated while attempting to connect using Verizons network. This is with the same VPN connection settings on the iPad2 that just worked with WiFi connection from the same device.
Here's what I can verify with regards to 3G networks:
Older (<4) iPhones and iPad1 using AT&T can connect
Windows and OS X based laptops using Sprint 3G can connect
Android based smart phones using Sprint 3G can connect
I have not called Verizon or Apple Support yet but, that's next when I have the time. My initial conclusion is that there is something with Verizons 3G services that is causing the issue. It may be that Verizon is using some sort of data compression process that is problematic with VPN transmission. While the log shows an unsupported IPv6 protocol when connecting via Wi-Fi, it still negotiates a successful connection and I don't think that's the root cause for the disconnect. Thoughts?

Hi Alexander,
I am running in to the exact same issue (although not with Linux). Did you ever find a fix for this? I have some support tickets open with my VAR's, but found your post and thought I would check. If I find anything I will post.
Thanks
Stu

"unable to connect to the data access service" installing report server

Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
Dan

Hi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan

Wi-Fi connection issues since securing network

Hi all,
Hoping to get some solutions as I have tried to troubleshoot this issue with other posts and google searches. Here is my scenario :
I'm running OS Lion 10.7.5 on my MBP and have been connected to our home wi-fi for about 12 months on a connection that wasn't secured by password.
Since having some download issues and fearing that someone is connecting outside our household, we have secured our wi-fi and added a password.
Both mine and my sister's iPhones got prompted to select a network, selected the appropriate one, punched in the password and were connected with no issues. My iPad Mini, Dad's laptop and both my parents' phones all connected with no issue.
When I booted my MBP, I was prompted with needing to join a new network and upon selecting our home network was met with an immediate 'Connection timeout' response.
I try to connect manually through Network in the System Preferences and got the same 'Connection Timeout'. When I click 'Assist me' and try to connect that way, I am finally prompted to input the password, which I do correctly and I get 'Invalid Password' etc etc response ... then after about 5 seconds it connects me !!
So even though the connection timed out and I wasn't able to put a password in, manually doing it told me the password was wrong etc then I get connection like normal. If I switch my laptop off/reboot/log out/turn wi-fi off then back on, I'm back to square one and can't connect unless I follow the same tedious steps.
Fearing it was an issue with our router, we have since bought a new one, installed it and reconnected all the devices as mentioned above, however my MBP connection issue still exists.
How can I get it to connect automatically like it used to and recognize our home network with a correct password, without continually having to go through all those steps ?
I have tried to delete that entry in my preferred networks and tried to re-establish it etc. Keychain Access doesn't list my router and input password.
I'd like to be able to solve the issue asap if possible and hopefully without having to delete all of my other known networks that I connect to as I travel all over the country for work and have about 6-8 routers I connect to, depending on what city/office I'm in.
Any assistance would be appreciated !

Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
Step 1
Back up all data.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 2
Reset the System Management Controller

Wi-Fi Connection Issue at Startup When NAS configured as Login Item

Hi!
I recently ran into internet connection issue during startup. I managed to find the culprit (it's the firewall) but I believe there should be more behind just blaming the firewall for it.
Before I go any further, it would be best if I try to explain the setup that I have. Also, note that I'm a newbie when it comes to terms like DHCP, IP address, IPv4, IPv6, etc. I think I may have an idea what they do, but I'm not quite sure whether that idea jibes with the real thing. Whatever. Anyways, here's the setup.
For the internet connection at my place, I use a Cisco wifi router and an Airport Extreme Base Station. The Cisco router has been set up to have its own wi-fi network, while the Airport Extreme Base Station is connected to the Cisco router using ethernet. I set up a separate wi-fi network for the Airport Extreme Base Station and almost all of my devices are connected using the Airport Extreme's wi-fi network.
I have 3 external hard drives connected to a USB hub, which in turn is connected to the Airport Extreme base station.
2 Macbooks. One is a white, late 2007 MacBook running Lion. The other is a MacBook Pro running Mountain Lion. I turned the firewall on for both Macbooks.
Initially, there was no problem connecting to the internet and also the 3 external hard drives from the Airport Extreme. I did the wireless connecting to the external hard drives manually after startup (open finder > navigate to airport extreme at the sidebar > click on the hard drives one by one until the eject icon and folders are shown). You can imagine how soon this got annoying for me (yeah, I shutdown my macbooks everytime I finish with them, it's a habit). So I put these external hard drives as a login item at startup (in the system preference setting for accounts) so that I won't have to do this everytime I start my macbooks.
This is where it got interesting.
For my MBPro, during startup the wi-fi icon at the menu bar will show that it was trying to connect and then the '!' symbol is shown. When I go to system preference > network, there was a message about self-assigned IP. I notice that it starts with 169, which is not the usual IP assigned to devices in my home network. This, however, usually did not last long. Soon enough the '!' symbol is gone and the wi-fi connection becomes normal with finder windows popping up showing folders for the external drives. It's a minor annoyance, waiting for the '!' symbol to go away (I think it got something to do with DHCP settings sent from the router and the self-assigned IP address, but again I'm not sure), but at least the MBPro can connect in the end.
For my white MB though, things didn't go well. The '!' remains in the wi-fi icon and there was no internet connection, no matter how long I waited. Even after removing the external drives from login items the problem persists during startup. If I remember correctly sometimes there is a pop-up saying that the computer could not connect to the airport extreme server (this also happens on the MBPro).
I initially tried resetting the wi-fi setup (removing the network from the list of known network in system preference > network, removing the wi-fi network password from keychain access) to no avail (in both macbooks). As mentioned above, I also tried to remove the network hard drives from login item but even after that the connection problem persisted in my white Macbook, while the MBPro initially showed the same symptom before finally managing to connect with the proper IP address.
Finally, after googling through forums some people suggested that turning off the firewall might work. I did so, and voila, it did remedy the situation. Both Macbooks manage to connect to the internet during startup without any fuss, and both even manage to connect to the network drives during startup (I put them in again as login items to see if it would cause further trouble).
So, the firewall was the culprit. But it only started acting up AFTER I put the network drives as login items.
Can anyone explain the cause of this?
Anyways, thanks for reading!

Make sure you are using the passkey found on the Homehub and not your email password. You may need to "Forget" the connection on the phone and scan again then enter passkey.

Messages App| connectivity issues since upgrading to Mavericks

is anyone having problems since upgrading to Mavericks with connectivity issues in the "Messages" app? Im on a 2011 MacBook Pro. I will start a desktop share session with my folks (IMAC) and within 2-3 minutes of having access to their desktop, I'm unable to control any longer and their system freezes.

HI,
When iChat 3 came out someone tested whether it would work on the platform that was running iChat 2 and also tested whether iChat 2 would work on the later OS.
This eventually led to the Reinstall procedure for iChat 3 up to the iChat 5 version.
Since then the app has required either a Backup version from when it was working, a copy on another machine running the same OS and app version numbers (the two go hand in hand) or you have to Reinstall the whole OS which will always update you to the latest version of the OS (and in the case of Messages any updates it has had).
8:01 pm Saturday; December 21, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

JDBC-ORACLE CONNECTIVITY ISSUE WITYH OCI8 DRIVER using oracle 11g client..

JDBC-ORACLE CONNECTIVITY ISSUE WITYH OCI8 DRIVER using oracle 11g client..
I am getting below error when i m trying to access oracle db using oracle 11g client. It works with earlier oracle client versions. how do i resolve this. is there any issue with version of ojdbc6.jar that i am using??? I cant use thin driver since its an old application for which i dont have source files.
Apr 6, 2013 1:00:59 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.UnsatisfiedLinkError: no ocijdbc9 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:992)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:262)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at PettyCash.SysDate.getSysSubSys(SysDate.java:232)
at org.apache.jsp.PettyCash.index_jsp._jspService(org.apache.jsp.PettyCash.index_jsp:186)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Code is as follow for reference
import oracle.jdbc.driver.*;
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
conn = DriverManager.getConnection ("jdbc:oracle:oci8:@" + database,db_user, db_pass);
eNVIRONMENT VARIABLES set are as follows:
classpath
C:\Program Files\apache-tomcat-5.5.12\common\lib\servlet-api.jar;C:\Program Files\apache-tomcat-5.5.12\webapps\ROOT\WEB-INF\lib\classes12.jar;C:\Program Files\apache-tomcat-5.5.12\webapps\ROOT\WEB-INF\lib\ojdbc6.jar;
JAVA_HOME
C:\Program Files\Java\jdk1.5.0_04
PATH
C:\Program Files\Java\jdk1.5.0_04\bin
ORACLE_HOME
D:\Oracle11\product\11.2.0\client_1\BIN

Apr 8, 2013 5:24:06 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.NullPointerException
     at org.apache.jsp.abc.index_jsp._jspService(org.apache.jsp.abc.index_jsp:280)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:432)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:868)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:663)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)

Connection issue in MS access throught labview

Similar Messages

Maybe you are looking for