Connection object creation error(ES55)
Dear Friends,
When I try to create a connection object using tcode ES55 I am getting an error "Alternative ID Not supported", Message E7045, "An alternative indicator is active in Customizing of the functional location. This functionality is not supported for connection objects and device locations".
If I deactivate at Functional Location Level, system asks activation settings are not maintained.
Can somebody guide me on this issue.
with regards,
Dayanand
Dear william,
I am not able to execute tcode ES55, becoz if I activate alternate labeling, system throws an error to deactivate it. If I deactivate it system throws an error to activate it.
Please suggest how to overcome this. We are using IDES 800 only. Do we need to update any patches.
with regards,
Dayanand
Similar Messages
-
Hello
We are developing a website using the java technologies.
We are not using the connection pooling for connecting to the database. We use a static connection object and calling it in all the pages.
Is there any other good method for connecting to a database?Writing to memory purpose is storing memory
Static connection should not use for data entry operation (if there is any common insert, update or delete statement exists). If any one of the client gives a commit cases all the database entries of the particular connection will be committed. In the case of display purpose static connection will not cause any problem.
If u r requirement is for data entry then try to use one method.. Whenever user logged in create a unique id and create a connection for this particular user. Then store this connection as well as id in a static hashmap in servlet. This id should be attach in all the further requests for retrieving the connection..
If anymore clarification needed
Mail me
[email protected] -
ISU Connection Object Creation
Hi,
I am trying to create a IS-U Connection Object using .Net Connector 2.0, but when i execute the function it creates the Functional Location in PM, but i need to create connection object inside IS-U, BAPI function provided by SAP allows me to create only Functional Location in PM, is it any way by which i can create IS-U Connection Object using NCOWay around is to execute the T-Code from .Net using rfc functions
-
Proxy object creation error - Message no. SPRX137
We were trying to create a proxy object and we come to the screen where you enter the wsdl URL. But the results we get is:
Error when creating HTTP client: URL: Error:Connection Parameters (Host or Service) Not Availa
Message no. SPRX137
We are unable to create this. Anyone have any ideas?
SteveHi,
Thanks but you have not mentioned here how can resloved. Also not mentioned this question is answered.
Please mentioned both of them in case any one found this type of problem then he can see the solution which is appled by you.
Regards,
Anil -
Business Object creation error: The service mapping is missing
Hi developers,
In my CAF 7.1, I have my business object "maintenanceRequest" with several attributes.
Persistency is remote. Permission check is disabled.
Create operation is mapped to the external service (enterprise service) createMaintenanceRequest.
The input fields are mapped, output fields are not mapped since create operation doesn't have any.
All the other operations are not mapped.
I have exposed as web service the operation "create",
I have generated, built and deployed the app.
When I try to run it from wsnavigator I get an error in the SOAP response:
com.sap.caf.rt.exception.CAFCreateException: The service mapping is missing
Please note that the ES works ok (e.g. from Visual Compose 7.1).
The ES was imported in NWDS 7.1 from service registry.
Can anyone please help?
Thanks, regards
VincenzoHi Sampath, thanks for your helpful reply.
I followed the steps from saphelp, but I get errors.
I mapped my external service destination (an R/3-based Enterprise Service published in service registry) to:
- UDDI_DESTINATION (error: objectNotExist) [but the ES is correctly published in service registry]
- wsdl address in backend R/3 system (error: Deserializing WSDL stream failed)
how should the logical destination be configured?
Thanks a lot
Vincenzo -
Viewer object creation error: OH4J
When i do the line
var = new Viewer(startURL, true,true,true); I am getting a windows error involving ntvdm.exe.
"Error while setting up enviroment for the application. Choose 'Close' to terminate the application.
-Close- -Ignore-"
Anyone know why this is? When I use the help class instead of the viewer class I dont get this error.I have no idea why it was doing the error, but I changed my java command to javaw and it works without error. Feel free to delete this thread moderators
-
Dump Error in ES55 Connection Object
Dear Experts,
I am getting the error when I am saving the connection object.
Error in the ABAP Application Program
The current ABAP program "CL_EEWA_RFC_CONTAINER_LOCATIONCP" had to betTerminated. because it has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_EEWA_RCI_COMMON============CP " in include
"CL_EEWA_RCI_COMMON============CM003 " in line 145:
"The data object "LS_EQUI" does not have a component called "LOGIKNR_WA"
It seems, I am missing some config settings.
Please help me to close this issue.
Thanks
AswinHi Aswin
The problem is not caused by the number ranges, but an inconsistency between the Data Dictionary and the code.
The code for method GET_SERVLOC_BY_CONTAINER of class CL_EEWA_RCI_COMMON (in the shortdump as CL_EEWA_RCI_COMMON============CM003), selects information from view V_EQUI_WASTE and tries to populate an internal structure using the fieldname LOGIKNR_WA of the view.
Please check the view V_EQUI_WASTE contains an append called EEWA_EQUI_WASTE (transaction SE11, the append should be at the bottom of tab "View Flds." (probably not). Afterwards check if append view EEWA_EQUI_WASTE exists (again use transaction SE11).
If EEWA_EQUI_WASTE is missing altogether or if the view V_EQUI_WASTE doesn't contain the APPEND, there was a problem with the SAP installation or an upgrade. Please check with Basis and SAP to get this fixed.
Are you by any chance using waste management? Or are you a stock standard power company?
I wouldn't expect this code to be called, when you don't use waste management, so there might be some customising someone (ab)used: IMG: SAP Utilities: Waste Management.
Yep
Jürgen -
Error when run the transaction ES55 or ES56 of Connection Object
Dear Expert,
I like to say that our organzation is going to SAP 4.7 to 6.0. All the basis activity has been comlpleted & now its testing time.
I was faced the problem when create connection for Business partner. Actually when I write the t-code ES55 for creation of coonection Object in SAP menu path & press enter then show the error "system settings for the alternative labeling of functional locations have not been maintained in Customizing."
So I have activate the funclocation location alternative labelling. after that again run the T-Code es55 this time show the error "An alternative indicator is active in Customizing of the functional location. This functionality is not supported for connection objects and device locations"
Please suggest me how we customized the conection object 7 how will resolve the error.
Thanks & Regards,
DeepakHello Deepak,
please read note 964931:
These alternative labeling systems are not provided with the standard
product for the IS-U connection object and device location.
If you want to use alternative labeling systems for the IS-U connection
object and device location, SAP recommends a remote consulting.
Regards
Olivia -
Error in creating connection object
Dear Experts
When I am creating connection object using ES55 , I get Stop message saying : " Alternate ID not supported" and when i see Help it indicates : An alternative indicator is active in Customizing of the functional location. This functionality is not supported for connection objects and device locations
what could be going wrong
Plesae suggest me the solution
Thanking you in advance
warm regards
narasimhaHi,
Please check the following settings in SPRO:
Plant Maintenance & Customer Service - -Master Data in Plant Maintenance & Customer Service --Technical Objects --Functional Locations --Alternate Labeling of Functional Locations - - Activate Alternative Labeling --
In this setting pls inactive the setting for Alt.Label.Then go to ES55 and try.It will work.
Thanks,
Banasri Mitra -
FIM MA Export errors. There is an error executing a web service object creation.
While checking for the permission, we have figured that the Built-In Synchronization account is being deleted by an Expiration Workflow.
FIM MA Export errors. There is an error executing a web service object creation.
While checking for the permission, we have figured that the Built-in Synchronization account was deleted by an Expiration Workflow
Is there a way to restore. Thanks.I would re-run FIM setup - I think it can re-create this account
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer. -
An error occured while opening the connection: Object reference not set to
After I uninstalled Oracle Developer Tools for Visual Studio .NET 10.1.0.4 and installed Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.21 I got the error message below when I want to connect to my 10g database using Oracle Explorer.
Error:
An error occured while opening the connection: Object reference not set to an instance of an object
I use OracleConnection to open also cannot be done. But I use Oracle SQL Developer I can connect to orcl that I cannot connect using ODAC 10.2.0.2.21 in my laptop.
Please help me.
Ming ManSorry my mistake, I double checked, the one I uninstalled is ODAC 10.2.0.2.20 and not ODAC 10.1.0.4.
But I have that error.
Ming Man -
Error in creating Connection Object and Device Location
Hi ,
When i am creating Connection Object and Device Location , system is giving dump . all other object are working fine.
the error is gievn below :
Error in reading table TE130.
i checked this the table , its have no entries ( mainly field ISTYP is blank ) and this is the cause of problem .
Could you please tell me that how to fill this table before creating Connection object and device location. i think some configuration should be needed for this but i dont know how .
thanks and regards
Deepak.Hi Deepak,
You can check standard configuration in client 000.
Meanwhile you can use this settings:
ISTYP TPLKZ FLTYP NUMKI NUMKE
C AO_GP A 01 OC
D AO_GP G 02 OC
This is where you define structure indicator for isu technical location category.
ISTYP correspond to the type of technical location in ISU, C for connection object and D for device location
The content of TPLKZ is defined in the following menu in SPRO.
Plant Maintenance and Customer Service
Master Data in Plant Maintenance and Customer Service
Technical Objects
Functional Locations
Create Structure Indicator for Reference Locations/Functional Locations
Hope it helps,
Regards,
Daniel Valenzuela
Edited by: Daniel Valenzuela on Feb 4, 2008 3:22 PM -
Error when calling rollback on connection object
Hi,
I am using 10g client connecting to 9i database on Linux RHEL 3.0 with gcc 3.2.3
When I call connection->rollback(), (where connection is of type Connection), my application core dumps with the following error : "pure virtual method called"
I looked in occiControl.h and the method is pure virtual. However, so is the terminateStatement, but i don't have any trouble when i call that.
Any ideas?
Other api's for Connection object such as createStatement and terminateStatement work fine.
Thanks much,
NiloferWant to correct my previous post. Problem was not with the connection being passed as a pointer (pointers and references work the same way as far as virtual calls are concerned. Both are valid.).
Problem was with the connection object. Under certain conditions, it would get released somewhere before the call to rollback.
Thanks,
Nilofer -
Errors occurred during extraction of UD Connect object field- table not fou
Hi,
In BI 7.0 system I can't select any UD Connect source object on the "Extraction" tab page of the DataSource maitenance screen. If I type the table name (which is "UDITEST") into it and then hit the "Proposal" tab page, I get the following error:
Errors occurred during extraction of UD Connect object field-list: Errors occurred during extraction of UD Connect object field-list: UDCADAPTERROR::RSSDK|200|Table: uditest not found|
Message no. RSDS_ACCESS036
Analysis:
1) We have tested the BI JDBC Connector using the URL:
http://xxxabcdev03:50000/TestJDBC_Web/TestJDBCPage.jsp
We got the list of tables displayed (UDITEST table is also displayed)=> connector is configured properly.
2) When we are trying to configure the Source system in rsa1->modelling->source systems-> UD connect -> create,
a) RFC Destination: We are using an RFC Connection that is already in place of type 'T' between the J2EE engine and BI ABAP engine. We tested this connection from SM59 -> TCP/IP connections and it is working fine.
How do we test whether the RFC between J2EE engine and BI ABAP engine is a 2 way RFC connection?
b) Logical System Name: We have manually typed in free text 'UDC_local'. Could you please clarify do we need to type in manually or select the logical system name from the F4 help?
Which logical system name should we enter here exactly.. pls clarify.
Do we have a seperate logical system name for the J2EE server...?
c) Type of Connector : JDBC
d) name of connector: SDK_JDBC
e) Source system name: SDK_JDBC
f) Type and Release : blank
Thanks to any answers in advance!
Best regards,
SyamHi,
Tried to give the Logical System Name in uppercase ie: UDC_LOCAL.
Now, when I click on the F4 of 'UD Connect Source Object' in Extraction tab, I get the message as below:
"Extraction of existing UD Connect data source objects".
But no list of tables is being displayed. When I entered the table name (UDITEST) manually, it gives the same error as :
" Errors occurred during extraction of UD Connect object field- table not found"...
Could you please specify from where is the UD Conenct source object fetched from?
Rgds
Syam -
Connection object, alternate ID error
Hello experts,
when i create connection object i get the error: "ID is not supported"
please resolve this problem.
Regards.
HarshDear Harsh,
For error message "Alternative ID not supported".
Please see SAP note 1163742 there is a normal correction instruction which can be implemented automatically and there is a modification correction instruction which has to be implemented separately.
I hope this is helpful for you.
Regards
Maybe you are looking for
-
Hello all, I installed the 10.6.8 combo update for my xserve earlier today. I also need to update the server tools to 10.6.8 since I am trying to create a new NetInstall image from a .dmg that is running 10.6.8. The server tools update has always sho
-
[N73] Contactblocking / barring
Dear people, I got a problem with my N73, I got many actually, but that doesnt matter. The problem is that if my dad is trying to call me he gets always a message that my phone is not turned on. Nobody else has that except my dad. He is able to send
-
Hi Guys Is there any way of exporting a small clip in FCP to an animated flash sequence or as a GIF. Thanks
-
Getting output from an OS command from an ABAP program
Hi Folks! I have a requirement, is it possible to call an operating system command, and also get its output back to the ABAP program that has called it? For example, from an ABAP program calling the "dir" command from Windows and getting back (as a s
-
IE Pluggin question ... problem or not?
In my employment we utilize a pre-packaged product that we can and sometimes do customize to our needs, as well as add additions to. This package is available in both traditional client/server and thin-client (web-browser) server form. At this time,