Connection problem in oracle10g and developer6i as front end!

Hi, guys i installed oracle 10g database first and then installed developer6i, and the installation was successful. i changed the TNS name file in both the folders same.But when i try to login to the sql plus of oracle10g then the error comes as "listener does not currently know of the service requested in the connect descriptor". And when i try to login to the sql plus of developer6i then the message comes as "Message12514 not found; product=RDBMS80; facility=ORA" Please can i get some suggestion to solve this problem.
thanks.
Waiting for your precious ideas.

Firstly, Developer 6i is not certified with 10g DB (but it might work). Which patch version is it ?
About Sql*Plus, 10g version, you probably have some discrepancies between tnsnames.ora and the listener. Please post your tnsnames.ora file (10g Home) and the result of
C:\> lsnrctl services
About Developer's Sql*Plus the problem seems to be ORACLE_HOME variable not set. Try this
C:\> set ORACLE_HOME=<Developer Home path>
C:\> set PATH=%ORACLE_HOME%\bin;%PATH%
C:\> sqlplus ..........

Similar Messages

  • Advice regarding using 3.5 front end AND 7.0 front end on users' machines

    Hello everyone,
    We are trying to determine the best way to roll out the new 7.0 front end tools. We are doing a technical upgrade to 2004s first, and later converting all the objects. Initially we plan to have both the 3.5 and 7.0 front end tools both residing on users' pcs, until we convert all objects to 04s.
    Does anyone have a recommendation for rolling out the new tools to users, with out the risk of having them accidentally convert objects when they open queries (we have been told that if you open a query in the new tools, it automatically converts the objects). We need to prevent this from happening until we are ready to convert all the objects.
    Thanks in advance for any advice!

    The most important thing is to use naming conventions (maybe a new naming convention using the new tools). Then set security up to prevent conversion depending on your scenarios. When migrating, it is recommended to be very careful around converting global elements (variables, Global Calculated Key Figures, and Global Restricted Key Figures). Within the RSZCOMPDIR table, there is a version field (greater than 100 is 2004s elements) so you can see the version there as well. It is recommended to migrate all queries within a single infoprovider together to avoid conflicts with global elements.

  • C440 Internet connectivity problem Windows 8 and Now with windows 10

    This has been an ongong problem with this machine.  It will suddenly stop connecting to the internet. Can ping DNS server by IP, can ping internet IP addresses, all other computers in the house can still connect. Have disabled and reenabled the ethernet.Attempted to repair with windows, no luckflush dns and winsock, no luckturn firewall off and back on but still no luckmake static IP address and static DNS still  nothingback to dynamic IP address, nothing.  Ipconfig release and renew, still nothing. Reboot the computer and it works for  now.  This issue happens repeatedly any ideas? 

    hi timbash,
    Welcome to the Forums.
    May I know the model of your wireless adapter (e.g., Atheros AR9485) and the version of the driver that you're running.
    In addition to the troubleshooting steps that you've tried, can you consider doing the following:
    1. Run Windows Update to get the latest patch and bug fixes for the OS.
    2. Set the power plan to High Performance.
    3. Open Device Manager > Network Adapters then right click on the wireless adapter (choose Properties) > Power Management Tab > Uncheck“Allow the computer to turn off this device to save power”  then hit Ok.
       - Sample image
    If you're using a driver from the Windows Update, consider using the Windows 8.1 driver from the C440 drivers page (run it in compatibility mode if necessary) and observe.
    Let me know if the above steps works for you.
    Regards

  • Connection problem on Ipad3 and Iphone 4S after receiving assistance from verizon support

    How do I fix this? I spoke to "expert tech" about how my Verizon email suddenly converted to Yahoo - which I didn't like. Unfortunately in his remedy to fix I lost my server connection to my IPad and Iphone in addition to all of previous read and unread emails, folders etc... Now I can't even use my Ipad to check emails. Can't seem to find a way to talk to a support person via "help" b/c cannot seem to access a support person. I'm not happy right now. In fact, I'm frustrated and extremely disappointed.. The support did not seem to really know anything and as a result I'm starting fresh after losing 3 years of data. I I did however, get back my Verizon email acct but at a huge cost. Now why did my connection fail on my other devices and how do I fix it? Please anyone please help!!!! I don't want to mess with the Ipad for fear of losing more info. This really sucks. I know there had to be a better solution.

    First off Yahoo Mail has nothing to do with Verizon Email. However lets clarify something first. When you say verizon email are talking about an email account established through Verizon Fios, DSL ? Or are you referring to the email program that is native to the iPad and iPhone?
    In the set up of your email accounts with the mail programs you go to settings, mail-contacts-calendar, then click add account, it then gives you options to set up your pop3 email or exchange email, or msn, aol, etc.
    If you use Verizon.com for an email address you would click on pop email, then put in the information for that account.
    normally its your email address ([email protected] or [email protected]) of which the proper settings are available from the Verizon Fios or DSL internet site. You enter the smtp server info you were given from verizon in the space provided, and you then enter the pop3 server information in the proper spot. You finish up by entering your email password in the setup settings and click save.
    Setting up for yahoo,man,aol mail is much simplier since all it requires is your email address and password and the setup program for these web based email fills in the incoming and outgoing smtp server info for you.
    Always remember to make sure the "remove from server" option is not checked since it then becomes device dependent where if you leave it on the server you can retrieve from any browser the emails without losing them.
    Good Luck

  • Connection Problem with Oracle and Tomcat.

    I was able to enter Oracle using scott/tiger when I did not connect Tomcat.But when I connect tomcat I am unable to log onto Oracle.
    When I logged to the database then I tried to start the Tomcat but it gave an exception.So I went to the task manager and ended the running processes like isqlplus.exe, oracle.exe, tomcat.exe, apache.exe.When I ended all the processes except oracle.exe, tomcat gave an exception. But when I ended oracle.exe Tomcat started working but Oracle stopped working. I don't know what the problem is.
    Can anyone help me out?
    Thanks,
    Sravanthi.

    > Can anyone help me out?
    Yeah sure. Is there a SQL or PL/SQL related question in there.. somewhere.. hiding away?
    After all, you do realise that the name of this forum is SQL and PL/SQL and that it deals with the SQL and PL/SQL languages in the Oracle server.. right?

  • Connection Problems with iMAP and Mail in Mountain Lion

    Hi everybody,
    since the Update on Mountain Lion I am having the following problem:
    When my iMac wakes up after some time, Mail isn't working anymore by showing the triangle with the exclamation mark. By clicking on it it shows the following picture (sorry for being in german). What you see is, that the internet connection works fine but Mail says it cannot connect to the iCloud iMAP Server. I should check if iCloud supports SSL and if it does not, deactivate it...
    After closing Mail an reopening it again, everything works fine until the next episode of waking up...
    Any hints??
    Thanks!!
    Stefan

    If you do, I highly recommend wiping the harddrive and doing a clean
    install. An upgrade install, especially from two versions back is going
    to be nothing short of a crapshoot.
    Deactivate any software before doing so.

  • Connect problems via SQLPLUS and other tools

    I have installed an Oracle 10g Express database on my computer. I'm able to start the database as well as listener, and also login to the database. However, while trying to connect via SQLPLUS or PL/SQL developer, I get the following error message: ORA-12154 TNS: could not resolve the connect identifier specified. I also did a tnsping, but got the following error message: TNS-03505 failed to resolve name. I suspect that these 2 messages are somehow related to the problem. I set the following msdos variables: ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server. ORACLE_SID=XE. I also specified this in my registry. Also TNS_ADMIN is set to the following TNS_ADMIN=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN. On my computer I installed the XE client. I noticed that there are several tnsnames.ora and sqlnet.ora registered in several places.
    I also have the Developer Suite installed on my computer but cannot access it. I think this is due to the aforementioned problem.
    I would greatly appriciate advise in resolving this problem.

    You have several Oracle Home's, so you may be trying to get the tnsnames.ora file from another location. You could either declare the XE entry at all used tnsnames.ora files or you should be consistent with the sqlplus client you are invoking. After the PATH environment variable you may be invoking a sqlplus executable located elsewhere but the XE Oracle Home, so this sqlplus will try to resolve the tns alias at the Home where this was invoked from.
    I suggest you to verify your environment variables and make sure your path environment points to the XE oracle home and either reset your environment variables for your current session or invoke sqlplus with absolute path.
    ~ Madrid

  • Connecting Problems with iPhone and iTunes. Help please?

    When I connect my iPhone 4 to my laptop (Toshiba), I have a huge issue with connecting and syncing my phone on iTunes. During the time it is plugged and attached to my laptop, I can charge it and sync photos that are on my device to the compter, but I can not get it to sync with iTunes. Also, I do not know what my iTunes is fuctioning at (6.1- 7.1- 8.etc), but I did updated it about a month ago. Does anyone have any information and /or/ helpful advice on this topic?
    Thank you!

    Hi CookiCat,
    Follow the troubleshooting steps in the link below:
    http://support.apple.com/kb/TS1538
    Cheers,
    GB

  • Connection problems between desktop and Palm

    I used to be able to HotSync with my computer, but it stopped working. I thought it might be the cable, but I have gotten a new one and the connection is still not established when I try to HotSync. The computer doesn't seem to be recognizing the Palm cable as a Hardware device. I've trying all the trouble-shooting ideas from the Palm website, but I haven't figured it out. Any help is greatly appreciated, as I have not been able to back up my Palm in a couple months.
    Post relates to: Palm m515

    defenitely a device driver conflict.
    did you try Soft Reset you Palm?
    1. make sure your hotsync manager is running (it's the red & blue circle arrow down in your system tray where the clock is)
    2. Right click on hotsync mgr and  make sure the Local USB and Local or if you see a Local Serial option has check next to them
    3. Try closing down your hotsync manager by right click on it and select Exit and then re-enable it again by going into Start > Programs > Palm > Hotsnc Manager and try hotsyncing..
    When following the steps below - Did your system detect your hardware???
    For XP, right click on My Computer and select Manage.
    On top menu click on View and select "Show hidden devices".
    Turn off your Palm.
    Disconnect & re-connect your USB cable from your Palm to PC.
    Turn ON your Palm and do a hotsync. (keep on eye on your device manager)
    If the Palm Handheld appears, click the + sign to expand.
    Right click on The Palm Handheld and select properties.
    Click on Driver tab and click on Uninstall. (If you see more than 1 palm handheld device driver uninstall them, I have seen this in Windows 2000)
    Perform a hotsync and let your system detect the new hardware.
    if not you will need to uninstall Palm Desktop software and clean up your registry and backup your data.. let me know I will email you the steps..

  • OBIA- Connection Problems ORA-00604 and ORA-02248

    Hi,
    i have an installation OBI Server, Presentation Services, and Scheduler on RH Linux 64Bit, Oracle 11 DB, OBI Admin on Win xp,
    in online mode when i try import from Database i got following errors:ORA-00604 and ORA-02248
    but i can Create ibots and i see with sqlplus the created ibots in the DB.
    have anyone an idea, why the scheduler can read and write in the DB, but i cant read via Admintool, i try to connect the same db)
    Thx

    can you connect from Windows box using SQLPLUS? yes i can connect
    are you using native connection in Admin tool or ODBC? I try to use Native (OCI) to connect the Oracle DB
    check the above to eliminate the connectivity issues.

  • Wireless connection problem Photoshop C4795 and Mac OSX 10.9.1

    Help Please!

    You said nothing about installing the software and drivers.   Go here.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3940574
    I see only 10.9 but no 10.9.1 so I'm not sure if it will work.  I don't do MAC that much.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Getting error and connection problems with iPad and DLink DI-634M router

    We're seeing spotty connectivity from our iPad - sometimes it works fine, other times it can't get to any websites. Looking at our wireless router logs, I found a bunch of messages like this for the iPad's address:
    "Blocked incoming TCP packet from 192.168.0.140:52023 to 74.125.0.222:80 with unexpected acknowledgement 3307518865 (expected 3307530074 to 3307595610)"
    What does this indicate and how can I fix it?
    Searching a bit, I found recommendations to disable SPI on the router's firewall, but I don't see any option for doing that on the DI-634M's admin pages.
    Any help appreciated - thanks.

    We're seeing spotty connectivity from our iPad - sometimes it works fine, other times it can't get to any websites. Looking at our wireless router logs, I found a bunch of messages like this for the iPad's address:
    "Blocked incoming TCP packet from 192.168.0.140:52023 to 74.125.0.222:80 with unexpected acknowledgement 3307518865 (expected 3307530074 to 3307595610)"
    What does this indicate and how can I fix it?
    Searching a bit, I found recommendations to disable SPI on the router's firewall, but I don't see any option for doing that on the DI-634M's admin pages.
    Any help appreciated - thanks.

  • Connection problem w/ wired and wireless

    My internet service comes in via cable and goes to my modem. In then goes to my Belkin router. At a friends suggestion, I added an Airlink switch. From there, I split off to a wired G4 and an Airport Express.
    Despite several system resets, I can't get any connection on my wired G4. When I take the switch out of the chain, I can connect the G4 and the Airport Express but, the AE connect goes dead when the G4 is shutdown.
    Any help is greatly appreciated

    Hey jrmprod
    Modem>belkin router> Airlink switch < split to AE and ethernet .</div>
    Hmm, very interesting post. Your existing Ethernet network already has a router sharing your Internet connection, so you simply need to switch the AirPort Express into bridge mode. See this Apple Article for more info ... http://support.apple.com/kb/TA21540 & more info about the AE ... http://support.apple.com/kb/HT1515?viewlocale=en_US
    Good Luck ...
    Buzz

  • When will Apple fix the Yosemite connection problems with Bluetooth and USB?

    Since my Yosemite upgrade, my Apple mouse disconnects randomly - with increasing frequency, and my USB port does not connect properly with devices that used to work just fine.  Is there a way to reverse Yosemite?

    Re: how do i downgrade my OS for my macbook pro

  • Latest SP levels for BI 7.0 and it's Front-end tools such as BEx.

    Dear Experts
    We are using BI 7.0 connected into SAP ECC 6.0 to implement HCM in BW.
    I was told by the Basis that SP hasn't been upgraded ever since the BW system was installed back in year 2008.
    They have come back today saying they have upgraded the SPs which I still doubt since the System Status shows me the same Release and SPs that I remember I had seen a couple of days ago.
    It is showing as below in System Status:
    Component Version: SAP EHP 1 for SAP NetWeaver 7.0
    Component Information (after clicking on the lens):
    Softwware Component      Release      Level      Highest Support Package      Short Description of Software Component
    SAP_BW                             701             0006       SAPKW70106                        SAP Business Warehouse
    BI_CONT                             703             0016        SAPKIBIIQ6                            Business Intelligence Content
    And the Query Designer shows as below when started:
    Business Explorer Query Designer
    Business Intelligence
    Release 2004s, SupportPackage 0, Revision 418
    And the BEx Analyzer shows as below after going to 'About':
    Business Explorer Analyzer
    Business Intelligence
    Release 2004s, Support Package 0, Revision 461
    Please let me know what are the latest patches and versions so that I'll ask my Basis to upgrade accordingly. As I could see that the Query Designer and BEx Analyzer are with different revisions, I am doubting if they are different for WAD, Report Designer and Information Broadcasting tools also.
    Where should the Basis start upgrading the SPs so that it will spread right across the system?
    Any help or directions to right info online is much appreciated. Thanks for your time.
    Regards,
    Chandu

    Hi ,
    You can use SP 4 for latest bex analyzer.
    We have installed recently.
    Thanks & Regards,
    Ramnaresh.P.

Maybe you are looking for