Connections to other systems
Hi,
I came to know that BD97 is also used to check the connections from R/3 to APO or other systems.
Does anyone know what's the advantage of using BD97 compared to SM59 and how do we check the connections in BD97?
Thanks
HI
GOOD
SAP WMS - Decentralized Warehouse Management System Integration Setup
You can operate the SAP Warehouse Management System (WMS) as a stand-alone decentralized system that is independent of a central Enterprise Resource Planning (ERP) System.
You make the necessary settings for the ERP (Enterprise Resource Planning) system within the WMS component (Warehouse Management System).
The steps are set up as a checklist and guide you through the process of configuring the system parameters.
Checklist (For those with the Table Views used transaction code SM30).
1. Customizing for "Enterprise Structure"
- Create storage location in OX09 (if necessary).
- Define warehouse number in Views V_T3001.
(you should not copy the warehouse number in the ERP system)
Activities within a warehouse, like goods movements and physical inventory, are assigned to a specific
warehouse number.
The physical warehouse where these activities take place is identified by the warehouse number.
- Assign plant/storage location to warehouse number in Views V_T320.
(Valid if the component MM-IM (Inventory Management) is implemented.)
Fields : Plant + Sloc + WhN
2. Customizing for "Decentralized WMS integration", section "Central processing" -> Application
- Activate decentralized WMS in Views V_T340DM.
- Define interface to Inventory Management in Views :-
V_156S_WM - Assign WM movement type references to IM movement types
V_T3211 - Delivery-Relevant Parameters for Reference Movement Type
V_T340DL - Delivery-Relevant Data for Warehouse Number
- Exclude stock in decentralized WMS in Views V_T321B
(if the decentralized WMS is not an SAP R/3 system)
- Finally do a consistency check for decentralised WMS in transaction OL20.
3. Customizing for "Application Link Enabling (ALE)", section "Basis Components"
Maintaining Logical Systems in Views V_TBDLS.
Assign logical system to client in Views T000.
4. Make basic settings for RFC in transaction BD97.(if necessary)
5. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model"
You can define the Reduce message types and Activate message types in transaction BD53.
SAP recommends that you use message types :
"MATMAS" (material master tables) and
"DEBMAS" (customer master) as a template.
Be aware that only those fields that are absolutely necessary are transferred from the master data tables in
the ERP system to the decentralized WMS.
6. Customizing for "Decentralized WMS integration", section "Central processing" -> Distribution
Use transaction OL19 to generate distribution model. As far as the application is concerned, when the model
is generated, application-specific Customizing parameters are modified or set (for example, activate
decentralized WMS).
Display or check distribution model
Generate partner profile in transaction BD82.
(you can also perform this activity using ALE Customizing)
Distribute distribution model in transaction BD64 (model view) using menu item "Edit"
If both the ERP system and the decentralized WMS are SAP R/3 systems, the distribution model should be
distributed on a central basis only, that is, via the ERP system.
7. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model" (transaction BD64)
Activate the change pointers for master data distribution using transactin BD61.
If necessary, reduce the message types concerned with transaction BD53.
8. Customizing for
"Logistics - General" - "Material Master" - "Tools" - "Data Transfer : Material Master" -
-> "Define required-field check for ALE/Direct Input" (Views V_T130S)
Define whether an error message should be generated in the receiving system for required fields
from the material master.
thanks
mrutyun
Similar Messages
-
Questions about using FILE adapter to connect to other systems
Hi,
in my PI scenario i am facing a problem in usage of the file adapter.
Our PI system is installed on a UNIX server. The target system for upload an download files is a WINDOWS system. The software installed on the WINDOWS system is only able to export the needed file lokal on the WINDOWS server.
Between UNIX systems i can connect a together used fileshare folder. But this won´t help me in my UNIX <> WINDOWS scenario.
I thougt on using an FTP server on the WIDNOWS system to make the PI able to connect via the FTP adapter but this works fine for one or two systems. I don´t think that this ist the best solution when connection to a lot WINDOWS systems, but mayby i am wrong.
Actually i use UC4 to copy the files between the two systems.
Any ideas how to deal generally with such scenarios?
Many thanks
MichaelEven though if you map Unix and Windows OS to read the files, in the long run the design will put you in trouble. Means it requires constant support. Better you go with unix script as per the above suggestion.
Regards
Pothana -
Not able to connect to other system
Hi All,
Currently have two Solaris 10 servers connected via a dumb Hub. I'm unable to ping either box but they can ping themselves. I have double checked physical connections and the following files;
/etc/hosts - verified that all devices are listed correctly
/etc/netmasks - Verified that network and netmask was correct
/etc/defaltrouter - deleted file as there is no router
/etc/resolve.conf - xxx.xxx.xxx.xxx listed as name server
/etc/nsswitch - removed dns from "host" line
/etc/inet/ipnodes - only local IP listed
Verified that correct NIC is enabled with ifconfig -a
also
The Hub has lights but no traffic/flashing lights is occuring
Plugged in each server by themselves, still no flashing lights
The HUB does have power and is switched on, The only switch is the uplink/normal toggle switch. (currently set for normal)
The Hub is a 8-port 3Com hubHi
Thanks for the reply and sorry for the delay...!
the following is the output of system "A" (hostname is "sunshine")
sunshine# ifconfig a
lo0:flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
elxl0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500index 2
inet 192.168.0.1 netmask ffffff00 broadcast 192.168.0.255
ether 0:1:2:9e:ee:77
sunshine# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
192.168.0.0 192.168.0.1 U 1 0 elxl0
224.0.0.0 192.168.0.1 U 1 0 elxl0
127.0.0.1 127.0.0.1 UH 4 195 lo0
==============================================
the following is the output of system "B" (hostname is "home")
home# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
192.168.0.0 192.168.0.2 U 1 0 afe0
224.0.0.0 192.168.0.2 U 1 0 afe0
127.0.0.1 127.0.0.1 UH 3 12 lo0
home# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
afe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.0.2 netmask ffffff00 broadcast 192.168.0.255
ether 0:0:e8:f6:f5:22
hear my systems are not connected to internet, i have connected them using a 8 port hub
in the system 'A' entries in /etc/resolve.conf file is
named 192.168.0.1
in system 'B' entries in /etc/resolve.conf file is
named 192.168.0.2
thanks
regards -
When I turn on my computer a message pops up asking if I want to allow other user access to my system. I allway say no. How can I get rid of this pop up?
Care to share which OS you are using? iOS is not for computers.
-
PI connecting to other system using SSL
Hi i tried to communicate to other server from our PI usng SSL, sapcrptyo is activated.. and other server Certificate is imported
Step that i do :
1. in the strust - environment - SSL CLient Identifies , i have create new entry called TESSSL. then
2. from STRUST , there is entry SSL Client test exist.. i have create the PSE by using the default entry.
3. I imported the other server SLL Cert, intemediate , root. and add it into the SSL Client test , Certificate list
4. Creating RFC type G, then filled in the target host, prefix and port, also activating the SSL on logon & security tab, by choowing the "SSL Client test"
upon testing the connection i got ICM_HTTP_ERROR
Edited by: Muda Ikhsan on Jan 20, 2010 3:09 PMThr 1800] IcmConnConnect: context 2 assigned to tid: 31, uid: 398, mode: 1
Thr 1800] NiIGetServNo: servicename '5443' = port 15.43/5443
Thr 1800] IcmGetServicePtr: new serv_ref_count: 2
Thr 1800] IcmConnConnect: direct connect to j2eedevt.eds.xxx.com:8443
Thr 1800] NiHsLGetNodeAddr: found hostname 'j2eedevt.eds.jxxx.com' in cache
Thr 1800] NiIGetNodeAddr: hostname 'j2eedevt.eds.jjsea.com' = addr 192.168.5.52
Thr 1800] NiIGetServNo: servicename '8443' = port 20.FB/8443
Thr 1800] NiICreateHandle: hdl 6 state NI_INITIAL
Thr 1800] NiIInitSocket: set default settings for new hdl 6 / sock 46 (I4; ST)
Thr 1800] NiIBlockMode: set blockmode for hdl 6 FALSE
Thr 1800] NiICheckPendConnection: connection of hdl 6 to 192.168.5.52:8443 established
Thr 1800] NiIConnect: hdl 6 took local address 192.168.5.23:59600
Thr 1800] NiIConnect: state of hdl 6 NI_CONNECTED
Thr 1800] <<- SapSSLSessionInit()==SAP_O_K
Thr 1800] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
Thr 1800] out: sssl_hdl = 0x115e46750
Thr 1800] NiIBlockMode: set blockmode for hdl 6 TRUE
Thr 1800] SSL NI-sock: local=192.168.5.23:59600 peer=192.168.5.52:8443
Thr 1800] <<- SapSSLSetNiHdl(sssl_hdl=0x115e46750, ni_hdl=6)==SAP_O_K
Thr 1800] SapISSLComposeFilename(): Filename = "/usr/sap/Q01/DVEBMGS00/sec/SAPSSLTESSSL.pse"
Thr 1800] <<- SapSSLSetSessionCredential(sssl_hdl=0x115e46750)==SAP_O_K
Thr 1800] in: cred_name = "/usr/sap/Q01/DVEBMGS00/sec/SAPSSLTESSSL.pse"
Thr 1800] <<- SapSSLSetTargetHostname(sssl_hdl=0x115e46750)==SAP_O_K
Thr 1800] in: hostname = "j2eedevt.eds.jjsea.com"
Thr 1800] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
Thr 1800] session uses PSE file "/usr/sap/Q01/DVEBMGS00/sec/SAPSSLTESSSL.pse"
Thr 1800] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 9 (0x00000009) = "the verification of the server's certificate chain failed"
secude_error 9 (0x00000009) = "the verification of the server's certificate chain failed"
[Thr 1800] >> Begin of Secude-SSL Errorstack >>
[Thr 1800] ERROR in ssl3_get_server_certificate: (9/0x0009) the verification of the server's certificate chain failed
ERROR in af_verify_Certificates: (24/0x0018) Chain of certificates is incomplete : "CN=VeriSign Trial Secure Server CA - G2, OU=
ERROR in get_path: (24/0x0018) Can't get path because the chain of certificates is incomplete
Thr 1800] << End of Secude-SSL Errorstack
[Thr 1800] SSL_get_state() returned 0x00002131 "SSLv3 read server certificate B"
[Thr 1800] No certificate request received from Server
[Thr 1800] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x115e46750)==SSSLERR_SSL_CONNECT
[Thr 1800] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
[Thr 1800] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt.c 201
[Thr 1800] <<- SapSSLSessionDone(sssl_hdl=0x115e46750)==SAP_O_K
[Thr 1800] IcmConnConnect(id=2/604): free MPI request blocks
[Thr 1800] MPI<3b4>4#7 GetInbuf -1 16f4b8 225 (1) -> 6
[Thr 1800] MPI<3b3>5#4 GetOutbuf -1 17f4f0 65536 (0) -> 0x70000003017f510 0
[Thr 1800] NiIGetServNo: servicename '8000' = port 1F.40/8000
[Thr 1800] MPI<3b3>5#5 FlushOutbuf l-1 1 1 17f4f0 2180 6 -> 0x70000003017f4f0 0
[Thr 1800] NiICloseHandle: shutdown and close hdl 6 / sock 46
[Thr 1800] IcmConnFreeContext: context 2 released
[Thr 1800] IcmServDecrRefCount: sapqa.eds.xxxx.com:5443 - serv_ref_count: 1
[Thr 1800] IcmWorkerThread: Thread 4: Waiting for event
[Thr 3342] Wed Jan 20 15:02:02 2010
[Thr 3342] NiSelISelectInt: 0 handles selected (0 buffered)
Anybody could help ?
Edited by: Muda Ikhsan on Jan 20, 2010 3:09 PM
Edited by: Muda Ikhsan on Jan 20, 2010 3:11 PM -
I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.
Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC). -
Steps to connect XI with other systems
Hi all,
What are the steps to be followed in general to connect a SAP system with a third party system using XI. It will be more helpful if I get information on the settings needed to be done on the 3 systems to get integrated (SAP,XI,Third party system).
I listed down the settings needed to be done in each of the system as far as I know. Correct/Update the list if you know more.
<u>SAP system:</u>
RFC destination from SAP --> XI
<u>XI system:</u>
WEB AS ABAP technical system in SLD
Third party system in SLD
Do we need a RFC destination from XI --> SAP?
Apart from the above, do we need to maintain any settings in XI(both ABAP and JAVA stack) and the ERP system.
Also, let me know what are the parameters(like host name,client) needed if a system is going to integrate with XI.
Your help will be appreciated
Regards,
SakthiHi Sakti,
<b>SAP system:
RFC destination from SAP XI</b>
correct
<b>XI system:
WEB AS ABAP technical system in SLD
Third party system in SLD</b>
correct
<b>Do we need a RFC destination from XI  SAP?</b>
during installaltion the connection is done...
see here in details...
<b>SAP XI</b>
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
<b>SAP R/3</b>
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
<b>In SLD System Landscape Directory</b>
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
<b>In Transaction SALE</b>
Define and Assign the logical system name.
<b>Apart from the above, do we need to maintain any settings in XI(both ABAP and JAVA stack) and the ERP system</b>
No need!!
<b>Also, let me know what are the parameters(like host name,client) needed if a system is going to integrate with XI.</b>
during the creation of Business ssytem...give the same logical name !!!
regards
biplab
<b>**reward if it helps u!!!</b> -
Mac Pro will connect to internet but not network with other systems
I have an iMac in my studio reception and a Mac pro and Macbook in my office. All three systems can connect to the internet but the Mac Pro has stopped networking with the iMac. However the iMac can network with the Pro. I have an ethernet cable connection to the Pro (no wi fi card) and I have a wireless router on the iMac which has enabled me to connect the Pro to other systems through wi fi. I also have a PC laptop and the Pro can connect to it via wi fi. Everything was networking properly several weeks ago and as far as I am aware I have not changed any settings. Does anyone have any suggestions on how to resolve this annoying little problem.
Hello there, WoodenToy.
The following Knowledge Base article offers extensive troubleshooting steps for troubleshooting your issue:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Although the entire article is a great resource you may want to focus on the section entitled: "Symptom: My Mac does not connect to the Internet".
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Windows 8.1 - Windows Couldn't connect to the System Event Notification Service service
I have an issue that has been bothering me for a while on new 8.1 computers. Standard users are not able to log into the computer on the first try consistently. They receive the error message: Group Policy client service failed the sign-in access is
denied. They are stuck at the logon screen.
If an administrator logs in (local or domain), they can log in but get a black desktop with two error messages. The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable. The second error message is a popup
balloon. It states "Failed to Connect to a Windows service. Windows couldn't connect to the System Event Notification Service service."
When a standard user attempts to log in, event viewer records three warnings. They are listed in order from oldest to newest
The winlogon notification subscriber <Profiles> was unavailable to handle a critical notification event. -Logged 9:14:44
The winlogon notification subscriber <GPClient> failed a critical notification event. - Logged 9:14:44
The winlogon notification subscriber <Profiles> was unavailable to handle a notification event. - Logged 9:14:49
After a reboot, users still have the issue. I noticed that the user profile services and system event notification service are not running though their startup type is automatic. They start after a minute or two.Hi Joseph__Moody,
Based on your description ,I assume it is a domain environment .First of all ,I would suggest you to try to update all the machine .
"I have an issue that has been bothering me for a while on new 8.1 computers"
Do you mean all the Windows 8.1 machine share the same symptom or just a specific one ?Did the machine work correctly before ?When did the issue start to occur ?Have you installed any third party software before ?Can we operate the machine when we login with
an administrator account ?
If the issue occurred with the specific machine :
"The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable."
Please try the following suggestions if we can operate the machine when we login with the administrator account :
Open Windows Explorer and navigate to: C:\Windows\system32\config\systemprofile and verify if it has the Desktop folder there.If the folder doesn`t exit, we can copy from C:\users\Default\Desktop location(This folder is hidden by default).
We also can try the following suggestions to have a troubleshoot :
1.Run "sfc /scannow"or "dism /online /cleanup-image /restorehealth" to check the health of the system files.
2.Perform a full scan with an antivirus software.
3."They start after a minute or two."
I suspect there is a third party service confilct here. Please perform a clean boot to verify whether there is a third party conflict here .
How to perform a clean boot in Windows
https://support.microsoft.com/en-us/kb/929135
If the issue occurred with multiple machines in the domian ,I would suggest you to check whether you have configured any logon scripts and logon group policy .We can remove the machine from the domain to have a troubleshoot .
If the issue occurred recently ,we can perform a system restore to recover the machine to a previous normal point.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]. -
How to delete file from other system(LAN)
Hello folks,
Cud u plz help me out in finding code for deleting a file from other system i.e in LAN,assuming that the connection is already established to that system.> Cud u plz
sigh
Please make the extra effort to write out words such as "could", "you", and "please". The extra keystrokes won't cost much in the way of time, and the enhanced clarity will be appreciated by those communicating on a forum with international readership. Also, it will give the appearance that you take your question seriously, which will in turn make your question look more interesting to answer.
Thanks!
~ -
regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you
Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen -
Unable to open RFC connection to SAP System NSP
Hi all,
During installation i am getting an error which is as follows,
"Unable to open RFC connection to SAP System NSP.
Solution: Start the system."
And the second problem is that there are no connections shown in SAPGUI.
Please help me out.
Thanking you,
KranthiHI Kranthi,
Have you checked this thread NW Preview Installation error?
Regards -
NAS drives grayed out and can't connect to other Macs
Hello All,
After upgrading my 15-inch, Mid 2010 MacBook Pro to Mavericks (10.9 13A603) my NAS storage drives are grayed out in Finder. I can't go directly to my NAS drive in Finder. I can't simply click on the NAS drives in Finder and see what is in the directory. The directories are grayed out!.
In order for me to connect to my NAS stotage drive I have to go to "DEVICES" on the leftside of the Finder window and then click on the MacBook Pro HD. From there I have to click on "Network." From "Network" I can get a slow connection to my NAS.
As for as connection to other Macs in my office, I have to take the same steps above. I can't connect directly to the other Macs in my office in Finder. Nether can the other Macs connect to other Macs! All Macs in the office are set up to allow both AFP and SMB. However, one lonely 2009 iMac in our office is still on Mountian Lion and it can connect to other Macs and the our NAS without problems.
One strange things this, I can do a Screen Share to the other Macs from my 2010 MacBook Pro! I can't connect directly in Finder, but I can do a Screen Share. Strange!
Is there a fix for this or was Marverick let out the jungle to earily?
Help! and Thanks!I forgot to add that everything was previously connected via an Airport express wireless system. I just got an Airport Extreme system which hasn't changed things a bit.
-
CALL_FUNCTION_OPEN_ERROR in CRM while trying to connect to ECC system
Hi All,
We are having issues while connecting to ECC system from CRM at specific point of time.
It occurred only once yesterday . Since it is a production system, we need to investigate the cause of the issue.
Upon checking the logs, I can see dumps in ST22 stating CALL_FUNCTION_OPEN_ERROR while trying to connect to ECC.
This issue has been faced by multiple users at the same time.
Both CRM and ECC are in the same server . There are no errors in ECC system ,
The error description says
Error opening RFC connection
Error text........... "Group USER not found"
Description.......... "LgIGroupX"
The response time is fine for the system and during the time when the error occurred.
Both the systems are in kernel 720 patch level 416.
There are no errors in dev_rd and dev_ms as well.
The errors in trace file also give information that ECC system cannot be reached.
However our ECC system was available , up and running and there were no issues at that time with ECC.
I have attached the dump, kernel and patch level details , work process trace files and the response times.
Please suggest.
Thanks,
Sowmya.LB: Hostname or service of the message server unknown#DEST =PUCCLNT220#MSHOST
=puc.apps.eon.com#R3NAME =PUC#GROUP =USER"
disp+work information
kernel release 720
kernel make variant 720_EXT_REL
compiled on Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116 for linuxx86_64
compiled for 64 BIT
compilation mode UNICODE
compile time Feb 16 2013 02:50:12
update level 0
patch number 416
source id 0.416
Error from work process trace file
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
M
M Mon Apr 20 15:48:09 2015
M ThPlgTimeout: ThPlgTimeout for plugin T144/U17974
A
A Mon Apr 20 15:58:59 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
A
A Mon Apr 20 15:59:02 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1 -
RFC connection to source system is damaged , no Metadata uploaded
Hello Friends,
I need your help to understand and rectify why my transport is failing again and again.
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata upload
Environment - Production Support (Dev - Quality - Testing - Production)
Alive scenario - Need to create two InfoObject and incorporate the fields in to data targets and reports.
What we have did?
1st request - We have created new request and captured two Infoobjects in to the request.
2nd Request - We have captured the replicated Datasource along with that the below sequence displayed by default in the same package.
Communication structure
DataSource Replica
Transfer Rules
InfoSource transaction data
Transfer structure
3rd Request - we have captured DSO and Cube only in this request.
4th Request - Captured 2 update rules (ODS) Update Rule (Cube)
The above 3rd request failed in the testing system (successful in Quality System) and ODS is inactive in the Testing system.
Testing system Error Message:
The creation of the export DataSource failed
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object ZEOINV09
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/AZEOINV0900)
Table /BIC/AZEOINV0900 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/AZEOINV0900 has not been activated
Error when resetting ODS Object ZEOINV09 to the active version
So we have captured the data mart Datasource and created a new( 5th ) request (transported only 5th request )and transported in the below sequence
Communication structure
Datasource Replica
Transfer Rules
Infosource transaction data
Transfer structure
development to Quality - Successfully
Failed in testing system again.
How to rectify this error, please help us
Thanks,
Nithi.Hello All,
*Question -1*
I have checked the connections and typed the steps below - what i have seen in the screen.
Steps :
R/3 Connection - I have double clicked on the BT1CLNTXXX and tested the connections.
Connection Type :
Logon - 0KB , 10 KB , 20KB, 30 KB
R/3 connection:
5 msec, 0msec, 1msec,1msec,1msec
Please let me know whether RFC connection is OK or not.
Question - 2
I want to know is there is any option to check before transporting the TR from Developement to Quality - "Preview Check " the sequence , so that we can avoid the Transport failure because of TR sequence.
Regards,
Nithi.
Maybe you are looking for
-
Search help for custom field in SRM
Hi All, Im new to abap. I want to add(enhancement) custom input field with search help function for organization unit. I hv added input field and its displaying in portal also. Now i want to add f4 help. Can u please help me in this regard. Can u tel
-
Mbean for creation of MultiDataSource
Hi, I need some help for MultiDataSource. I know how to create the DataSource. by using mbeanhome.createAdminMBean(beanname, beantype, DomainName); Can anyone tell me are MultiDataSource are created in the same way. if yes what is the Bean type and a
-
Scanner not working with new software?
Recently I bought and updated my computer with Snow Leopard. But when I went to do my first scan after updating, HP Photosmart told me that it could not find my scanner. Before, I came here to find a way to connect my scanner to my mac and I received
-
Unable to store log data into database through JDBCAppender of Log4j
I am able to store the log data into the file as well as to display that on console. But unable to store the same into the database. I am not getting any error or warning while execution. The code of log.properties is as below : - log4j.rootLogger=ER
-
Hi All In Vendor Master, there should not be any duplicate vendor name for a particular company code and purchase organization. We can achieve this by implementing Bussiness Add-In definition 'Address-Check'. Can anyone help me in the codes to be w