Console Message - YP server not responding, still trying

I am getting the following message in the CONSOLE MESSAGES app. It repeats every 10 seconds. The IP that is not responding is my old Windows PC that was connected to my router before I bought my iMac.
How can I stop the computer from trying to connect to this IP address?
20/11/08 10:54:10 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:20 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:30 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:40 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:50 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:00 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:10 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:20 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:30 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:40 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:50 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:56:00 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:56:10 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:56:20 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying

I found this response to the same situation on OSX
10.5 and I am wondering if this is safe to carry out.
Am I going to run into any problems if I do this?
{quote}A fix for the ypbind errors in system log
OS X 10.5 Leopard is showing these errors every ten seconds:
] com.apple.nis.ypbind[]: Domainname not set. Aborting.
] com.apple.launchd[1] (com.apple.nis.ypbind[]): Exited with exit code: 1
] rasalas-pro com.apple.launchd[] (com.apple.nis.ypbind): Throttling respawn: Will start in 10 seconds
I fixed it as follows:
Since ypbind is not used by OS X in 99.9% of installations, just turn it off.
Edit the ypbind start-up definition
sudo vi /System/Library/LaunchDaemons/com.apple.nis.ypbind.plist
and change
<true/>
to
<false/>
Then shutdown the service
sudo service com.apple.nis.ypbind stop
I'm expecting that the "false" will keep it from restarting on reboot, but not quite sure about that.
Also, for future reference
sudo service --list
will show all the 'services'...
{quote}

Similar Messages

  • Kernel: nfs server server not responding, still trying

    I got this message on my VM Host Server, which hosts VM Guests. When this message occured, all the VM machine hosted on the server from the NFS share were not accessible. In VM manager all the guest machines status went to "Unknown".
    Can anybody just highlight why this error comes, and what is the root cause for this message to occur. Is it NFS service issue, storage issue or Network issue? I would really appreciate if some one answers my query. Do let me know if some one needs more detail on the error.
    Thanks and Regards,
    Sundar

    HI,
    Usually if it's network related it just stops responding for a short time and then starts up again. I have seen however some Netapp NFS Clustered heads that do panic under large node, each node forcing the other to reboot due it loosing heartbeats in their cluster. However this is quite rare nowdays.
    I would look to see if other servers are able to see the NFS mount points +mount them ok. If you are unable to see all the NFS ports using rpcinfo -p then it's NFS / Network related.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Jumpstart install error:pmap_kgetport: Portmapper not responding; still trying

    I am setting up jumpstart server on Sparc V440 for x86 installation, when PXE from a Dell2850, the Dell2850 prompt as following:
    SunOS Release 5.10 Version Generic 32-bit
    Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    WARNING: pmap_kgetport: Portmapper not responding; still trying
    WARNING: pmap_kgetport: Portmapper not responding; still trying
    WARNING: pmap_kgetport: Portmapper not responding; still trying
    WARNING: pmap_kgetport: Portmapper not responding; still trying
    WARNING: pmap_kgetport: Portmapper not responding; still trying
    WARNING: mountnfs3: myhost:/install_x86/Solaris_10/Tools/Boot portmap not responding
    WARNING: pmap_kgetport: Portmapper not responding; still trying
    WARNING: pmap_kgetport: Portmapper not responding; still trying
    Does anyone encounter such issue? any suggestion?
    Thanks,

    This is the script I using to set up PXE server:
    0 /cdrom/..../setup_install_server /installdir
    1./add_install_client -d SUNW.i86pc i86pc
    2.dhcpconfig -D -r SUNWfiles -p /var/dhcp -l 86400 -h files
    3.dhcpconfig -N 192.168.100.0 -t 192.168.100.254
    4.dhtadm -A -m PXEClient:Arch:00000:UNDI:002001 -d ':BootFile=nbp.SUNW.i86pc:BootSrvA=192.168.100.1:'
    5.pntadm -A 192.168.100.59 -c client59 -f PERMANENT -i 01001143DB3250 -m 192.168.100.0 192.168.100.0
    6.
    dhtadm -A -s SinstNM -d 'Vendor=SUNW.i86pc,11,ASCII,1,0'
    dhtadm -A -s SinstPTH -d 'Vendor=SUNW.i86pc,12,ASCII,1,0'
    dhtadm -A -s SinstIP4 -d 'Vendor=SUNW.i86pc,10,IP,1,1'
    dhtadm -A -s SrootNM -d 'Vendor=SUNW.i86pc,3,ASCII,1,0'
    dhtadm -A -s SrootPTH -d 'Vendor=SUNW.i86pc,4,ASCII,1,0'
    dhtadm -A -s SrootIP4 -d 'Vendor=SUNW.i86pc,2,IP,1,1'
    dhtadm -A -s SjumpsCF -d 'Vendor=SUNW.i86pc,14,ASCII,1,0'
    dhtadm -A -s SsysidCF -d 'Vendor=SUNW.i86pc,13,ASCII,1,0'
    dhtadm -A -s SbootURI -d 'Vendor=SUNW.i86pc,16,ASCII,1,0'
    7.
    dhtadm -M -m 192.168.100.0 -e 'SinstNM="myhost"'
    dhtadm -M -m 192.168.100.0 -e 'SinstPTH="/installdir"'
    dhtadm -M -m 192.168.100.0 -e 'SinstIP4=192.168.100.1'
    dhtadm -M -m 192.168.100.0 -e 'SrootNM="myhost"'
    dhtadm -M -m 192.168.100.0 -e 'SrootPTH="/installdir/Solaris_10/Tools/Boot"'
    dhtadm -M -m 192.168.100.0 -e 'SrootIP4=192.168.100.1'
    dhtadm -M -m 192.168.100.0 -e 'BootFile=nbp.SUNW.i86pc'
    dhtadm -M -m 192.168.100.0 -e 'SjumpsCF="192.168.100.1:/jumpstart"'
    dhtadm -M -m 192.168.100.0 -e 'SsysidCF="192.168.100.1:/jumpstart"'
    Did I miss anything? thank your for any suggestion

  • "Update server not responding" when trying to update Acrobat 9 Pro

    I just installed Acrobat 9 Pro on my desktop computer and on my laptop. I was able to download and install the latest updates to the copy on my desktop computer (so that it is now version 9.3.0), using Help>Check for Updates.
    When I try the same command on my laptop, I get and error message that states "The update server is not responding, which means it may be offline at the moment, or the Internet or firlewall settings may be incorrect. Please try again later." I tried several times yesterday and today with the same error. The message pops up immediatley; it doesn't even seem to actually try to connect.
    I disabled my firewall and antivirus software and still get the same result. I uninstalled then reinstalled Acrobat and still get the same result.
    I looked online at Adobe.com to see about downloading and installing the updates manually, but it's difficult for me to tell which updates I need. Some are for other languages and some are for 64-bit but I have Windows 7 32-bit.
    A call to tech support was no help. The agent seemed to think because I installed verison 9.0 that I only needed the one English update listed on the download page under 9.0, and not any of the later updates. . . And he said that Adobe recommends manually installing updates from Adobe.com rather than using the Check for Updates command (?!).
    Anyway, does anyone know what might be causing this problem with the adobe updater? Maybe I need to reinstall the updater (where do I find it?).
    OR
    Can someone tell me which of the updates listed on the Acrobat dowload page I should manually install to bring my product up to date?
    [Running Windows 7 32-bit on both machines]
    Thanks.

    Hi,
    Which version of Acrobat do you have ?
    (Launch Acrobat and Go to Acrobat->About Adobe Acrobat menu item and check the version )
    Also, can you ping following urls ?
    armmf.adobe.com
    armdl.adobe.com
    ardownload.adobe.com
    Are these urls reachable ?
    Also, you can check the contents of host file /etc/defaults/host to see that none of the ips are redirected.
    One more thing that you could try:
    If you have firewall on, could you please disable the firewall and then try the update. Does it works now ?

  • HT1430 My email isnt working after updating iOS 6 I get a message - mail server not responding. Verify that you have entered correct account info in settings.- which I have Can anyone help me fix this?

    I recently updated both my iPhone and iPad to ios6 but since doing this I can no longer send or receive e-mails. I get the following message:-
    the mail server is not responding , verify that you have entered the correct account info in Mail setting -
    does anyone have any tips to correct this?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • HT204053 Message: iCloud Server not Responding...  How do I correct?

    All of a suddent my MacBook Air cannot connect to the iCloud Server.  I've reset my AppleID account, established a new password.  I can sign in to my account.  I can use iTunes and other features from my AppleID, but I no longer see the iCloud Server.

    An Apple ID can be used two different ways, as the ID for iTunes Store purchases and or iCloud.  They can each use different IDs or the same one.
    You say you can't sign into your account, which account?  iTunes Store or iCloud?  You say you can use iTunes and other features (what are they?), is this with the new password?  Are you still using the old password for the iCloud account?  Is it a different account than iTunes?

  • 7410 NFS server not responding

    Greetings,
    Anyone seeing "NFS server ... not responding" from a client of a 7410?
    I have a 7410 with a single J4400 (22 1TB drives @ RAID1, 1 spare, 1 logzilla). It's running 2009.09.01.3.0,1-1.8, which I believe is the latest and greatest. There is one client, a T2000 running Solaris 10. We're using NFS v3 to mount four shares from the 7410. Mount options look like this:
    box-nge2:/export/oracle/data     -       /oradata/data   nfs     -   yes rw,bg,hard,nointr,rsize=32768,wsize=32768,proto=tcp,vers=3,noac,forcedirectioA fairly large (~1TB) Oracle database lives here (although there was very little activity in the database when the following occurred).
    Today I was cleaning up some old data files from a now unused Oracle instance. Pretty simple: rm -rf /oradata/data/DO-NOT-WANT/ . I was surprised to see the command appear to hang, and the "NFS server kwaltz-nge2 not responding still trying" message appear. Control-C eventually got me my prompt back.
    When the system became responsive again a few minutes later I tried deleting files one at a time. Deleting some "large" data files (i.e 200GB or more) was taking more than 2 minutes, and caused the NFS server not responding message. Smaller files would take a few seconds.
    Why is a simple "rm" command bringing the 7410 to its knees? Any thoughts? Thanks.
    Edited by: roymcmorran on Dec 23, 2009 3:44 PM

    After some update issues, we also lost NFS. I created a test share and exported it to one of our Solaris 10 hosts. I got an rpcbind failure. This failure wasn't corrected by restarting the NFS service, nor rebooting the 7410. Rather, I had to DISABLE the NFS service, then re-enable it. After that, all connectivity returned.
    Charles

  • Exchange Server not responding - please try later

    Hi there
    Can anyone please help with my E75.
    I have had the phone over a year and since day 1 it has syncd perfectly well with my Outlook at work.
    Until a couple of days ago!!!
    Since then, it has refused to sync my calendar and contacts. It is still syncing e mail but about half way through the syncing process (once it has synced the e mails) I get the error message “exchange server not responding – please try later”.
    I have asked my work IT helpdesk but they have said speak to the mobile provider. They also said there’s nothing wrong with their servers but I got the feeling they hadn’t really checked.
    My problem is that I don’t know where to start.
    Is the problem to do with:-
    My phone?
    Its settings?
    Orange’s servers?
    My work’s servers?
    Nokia’s servers?
    I’m confused – please help.
    Ps I can’t believe it is my phone's settings as I haven’t changed these and it worked fine for a year. And, anyway, my credentials must be ok because it is still syncing my e mails.
    Thanks in advance
    Ian

    hi
    as i am still facing this problem also from couple of day one of my customers was complaining about yahoo messenger version 9 couldnt sign in after i make good troubleshooting i fond a massage in yahoo site and the massage is '
    Yahoo! Search Search:
    Welcome, ksatcw[Sign Out, My Account]
    • Messenger Home -
    • Help
    • Go Back to Yahoo! Messenger
    Yahoo! Messenger > Yahoo! Messenger > Messenger9 > Messenger
    Is my “Use Proxies – Enable HTTP Proxy” setting the reason why I can’t sign into the Yahoo! Messenger Beta?
    Yes. If your connection to the internet requires proxy authentication, then you won't be able to sign in with the current version of Yahoo! Messenger Beta. Instead, we recommend using Messenger version 8.1 for now. Sorry for the inconvenience! And thanks for reaching out early for the Beta. We’ll get this resolved as soon as possible.
    Email this page Print this page
    Was this article helpful?
    Yes
    No
    Contact Customer Care Click to contact Customer Care for further assistance.
    Top Questions
    • Questions about the closure of Yahoo! Messenger version 5.6?
    • Why do I need to upgrade to Yahoo! Messenger 9.0 if I have a firewall?
    • How do I install Yahoo! Messenger?
    • How do I configure my firewall/proxy server?
    Yahoo! Messenger crashes when I launch it.
    but if i disable my proxy the working fine without any problem and what i think is yahoo service the change some settings which not compatible with proxy settings or server .

  • Server Not responding message

    Why am I receiving a message that says "server not responding" when using safari on my IPad?

    When I reset safari it cleared the cache and deleted any cookies already. I tried it again but still no help. I've noticed there are random other sites I also cannot access with exactly the same error. It happens with Opera so it's not just a Safari issue and I've disabled Norton Security, even uninstalled it and that didn't resolve the issue either so I'm at a loss.

  • Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

    Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser.  I have tried restore option also.  This is happening with both Wlan and Data con. too
    Please help...

    I do not really know much about this kind of problem, but i may be your internet connection.
    If you are on your own #G network then:
    Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
    Then wait patiently until you get a good connection and then try again.
    If you are on a nearby Wi-Fi connection then:
    Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
    If all else fails, then you need to contact your provider for assistance.
    Sprint:888-211-4727
    AT&T:?
    Verizon:?

  • Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

    I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router  to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support.  The advisor took over my screen and we check that my laptop was synchronising   with I phots and it was.  The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

    Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

  • When emailing from iPhoto I keep on getting 'server not responded' message.

    Would anyone be able to help with the issue I have with iPhoto. Every time I try to email photos directly from iPhoto I get this message 'server not responded'. I have the lates Mountain Lion OSX installed on MBA. Also, in addition to iCloud account I tried to add two more email accounts to iPhoto hoping that this might solve the problem, but it didn't. Would anyone have any ideas what I might be doing wrong?
    Thank you.

    Marius,
    set the mailer in the iPhoto Preferences to "Mail.app", not to "iPhoto"
    iPhoto > Preferences > General
              Email Photos using: Mail
    This way you will be able to mail your photos directly from iPhoto, but you cannot use the iPhoto cards; use the Mail Photo stationary instead, once the mail panel opens.
    For some reason mailing using iPhoto as Mailer works for me only, if I am mailing from my iCloud accoun,t and if Mail is set to use the iCloud account by default.
    Regards
    Léonie

  • Iphone 4 server not responding message

    iphone 4 - "server not responding" message is coming up on my wifes ph.  can anyone help ?

    It sounds as if accessing data via cellular was not working. That could have been for any number of reasons, but she would need to check and see if she is seeing signal for the phone, and that besides the signal strength and carrier name in the upper left corner, she should be seeing 3G or something else. This lets you know you are accessing the data network. It could be poor signal not allowing connection, it could be a bad link that would not allow a website to open, any number of things. If it is still not responding, then try a reset. Hold the sleepwake and home buttons together until you see the Apple logo and then release. After the phone restarts, see if it is working.

  • Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

    Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

    Hello.
    Today I got the opportunity to work with a Muse user with the same issue after performing the troubleshooting steps in the post above we decided to contact the host.
    Later i came to know that host took Muse user's IP and they were able to unblock it and muse started connecting to FTP host.
    I another scenario Host suggested Muse user to add :21 to the FTP address and then Muse was able to connect.
    Eg    ftp.domain.com:21
    Please try the 2 suggestion above and let me know if it works.
    Regards
    Vivek

  • On my iPad, wifi connected but receive "server not responding" error messages on every app including iTunes. Rebooted, reset settings (all

    Help! Was using my iPad yesterday set it down for 10 minutes and all of a sudden received "server not responding" and "Cannot verify server" error messages. Cannot open/connect to iTunes to update software. Wifi is working with strong signal. Followed other message board suggestions: forgot network and readded, renewed lease, turned wifi off/on, reset network settings, reset all settings, powered off/on, rebooted, checked router. Internet works fine on laptop. I'm so frustrated and don't know what else to do. Any suggestions?

    Hello there, Swass26.
    The following Knowledge Base article provides some great in-depth troubleshooting steps to get to the bottom of your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

Maybe you are looking for

  • Open and close Posting Periods. Different societies.

    Hi all. We have 2 societies  0001  and 0002. In transaction S_ALR_87003642 or OB52 I want that user of society 0001 only can see posting periods of his society ( 0001 ) and the same with society 0002 users. How I can do this ??? thanks a lot. Ismael

  • Oracle 11.2 new feature - chopt utility

    Hey everybody, I'm am in the process of doing an 11g upgrade from an 10.2.0.4 to 11.2.0.3 version. We use Oracle Label Security. At a high-level, this is what I was told to do: 1) Install the Oracle11g software 2) Backup current 10g database 3) Relin

  • Wiki for Persian language

    Hi there one year ago I request to open a section for Persian language (RTL) on wiki but you told me to go over archlinux.ir. there was a discussion  about it in archlinux.ir but had no result. After that I start to write about beginners guide and no

  • Cross-section option sometimes missing on 3D PDFs

    I publish 3D PDFs of complex mechanisms for my subscribers. Sometimes Adobe Reader will offer a cross-section option and sometimes not. The 3D PDFx are not made by Acrobat Pro but with an embedded PDF generator inside my mechanical CAD software. I do

  • Nyone who had success using sign-encrypt policy(oracle web service manager)

    Hi All, I could not succeed in using sign Message and Encrypt and decrypt and verify signature policy using oracle web services manager.So I would be grateful if somebody who had success in using it would shed light on its use. Basically,I am using t