Constrained optimization - function conflict and error 91?
I am a fresh hand on Labview. I tried to use the constrained optimization approach for curve fitting, which unformately leads to the following errors.
1. "error 91".
I build the objective function (subvi1.vi) using "cno_objective function template.vit". When I tried to run it, an error message "error 91" pups up.
2. "function conflict"
When I tried to link the objective function (subvi1.vi) to the constrained nonlinear optimization block, the link is always broken, saying "function conflict".
Any help and comments are appreciated. Thanks!
Attachments:
subvi1.vi 21 KB
main1.vi 24 KB
Hey guest,
I checked your VIs and might have a few suggestions for you in using the constrained optimization. First of all error 91 is usually a variant error. It has the following text: "The data type of the variant is not compatible with the data type wired to the type input." I believe you get this error since you don't have any data in the variant in the subVI, so it doesn't know how to translate that into a cluster.
The broken wire you are seeing is due to there not being any connections made on the Connector Pane. To link inputs and outputs of subVIs you need to first configure the Connector Pane by right-clicking on the icon and selecting Show Connector and then wiring the controls and indicators to terminals there. I would suggest checking out the example for this VI, which you can then use for your application. If you open the context help (Ctrl+H) and then hover over the VI you want and then click the detailed help link. This will bring up the help file for this VI. At the bottom there should be a button for Open Example. You could also find it in the Example Finder (Help >> Find Examples)
You mentioned that you are fairly new at LabVIEW, so I wanted to point you toward a good tutorial for beginners called Learn LabVIEW in 6 Hours. This should give you a good general overview of what LabVIEW can do. Please let me know if you have any further questions!
Thanks!
Andy F.
National Instruments
Similar Messages
-
Resolving Replication Conflicts And Errors Very Weak In 5.0.0.6
The current 5.0.0.6 release of 9ilite is very weak in the area of resolving replication conflicts. It seems like you need to create your own conflict handling routine. First, you need to read the C$EQ table in the mobile admin account to check if any errors have been logged. Then you need to read the CEQ$tablename table(s) from the application schema based upon the data contained in the C$EQ table. At this point you can change the data in the CEQ$tablename table and then call the consolidator api from your application to either remove or process the transaction that caused the conflict or error.
I've worked with Oracle Support on this and they don't even have any information on this. It is left up to the user to figure it out.
Perhaps this will be addressed in the 5.0.1 release.
I was wondering how some other developers where handling this issue.
TomYou are correct, the method for bailing out of unresolved conflicts or errors is very lame. It would be 100x better if there were some sort of log file/log table entry giving a clue as to why the conflict is being dumped into the ceq$x table.
As far as workarounds, we're taking the approach of testing our app to the point that we hope no inserts into ceq$ ever happen. Probably a pipe dream, but hopefully later releases will address this. -
I tunes was running great until I downloaded the newest version. I`m receiving error messages ,and the stinking thing won`t play.Anyone out there have a solution to this problem??
Will iTunes open in safe mode? Hold down CTRL+SHIFT as, or immediately after, you click the icon that starts iTunes and keep holding until you see this prompt.
Click Continue.
Assuming iTunes has opened, enable the menu bar, if necessary, with CTRL+B. Go to Edit > Preferences > Store and untick Show iTunes in the Cloud purchases. Press OK, close iTunes, wait until it has had a chance to fully close then reopen.
Will iTunes open normally now?
tt2 -
I work with a macmini server:
Macmini 6,2
Intel Core i7
2,3 GHz
Os X 10.9.2First, clear your computer of the Adobe software previously installed with Adobe Cleaner Tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then download a clean copy of the software here:
Other downloads -
I have CS 5.5 Master Collection running on my Mac Pro 2 x 2.4 Ghz Quad-Core with OS 10.7.4.
Recently Acrobat had been quitting on me after it launched. I tried to delete all preference, but nothing worked. I decided to uninstall Acrobat and install it again, then I encountered, or see image below:
Your installation encountered errors.
Please try restarting your system and installing again.
Exit Code: 7
Summery:
1 fatal error, 2 errors, 0 warning
Error: DW020: Found payload conflict and errors:
Error: DW020: -Adobe Flash CS5.5 depends on Flash Player to be installed.
Fatal: DW020: Conflicts were found in the selected payloads. Halting installation.
Anyone had any idea how I can install Acrobat again without an errors?
Much appreciated for any suggestions.
Thank you.Hi,
Please try the following document : http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
If it still gives you the error, then find the installer log file under /Library/Logs/Adobe/Installers/ and paste it here.
~ Aditya Kalania -
SNP Optimizer Read Error Error id : 600 and Error id : 812
Hi All,
I am rebuilding my SNP in a new SCM environment. I have transfered my PDS's and WorkCenters/Capacity via the CIF. These appear fine when I display and have performed the LC Check for the resouces using the TOOLS at /n/sapapo/res01 tcode but all appeared green. I am using standard Hierachies and think they are fine and assigned to the Planning area correctly.
When I press the "oprimizer" ...It runns until it gets to the "Loading Planning Data" then it fails with a "Error when Reading Planning Data" and "Optimizer: an internal error occured". This error occurs very quick once it starts this process and complexity does not seem to matter.
When lookinjg at the Trace File of the log I see the below activity that seems to be the cause but I do not know what the errors mean or where to reference them? Has anyone else encountered this previousluy or know where can investigate this further. Any help or directions on Error id : 600 and Error id : 812 would be great!
Thanks in advance for all your assistance in this!
===
<i> 19.04.2011 19:04:39 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 801 to OutputInterface from []
<i> 19.04.2011 19:04:40 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
<i> 19.04.2011 19:04:41 snpopsvr_script.cpp(176) 'SuperVisor' Running in 700 data version mode...
<i> 19.04.2011 19:04:41 snpopsvr_script.cpp(862) 'SuperVisor' Interpreted run time limitation as minimum run time (300 sec.), set run time limitation to 900 seconds.
<i> 19.04.2011 19:04:41 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 803 to OutputInterface from []
<i> 19.04.2011 19:04:43 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'SNPRModelGenerator' [6]->init
<i> 19.04.2011 19:04:43 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'SNPRModelGenerator' [6]->init = success [ctx size : 0]
<i> 19.04.2011 19:04:43 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'SNPRModelGenerator' [6]->download
<i> 19.04.2011 19:04:43 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/MSDP_OPT_UPLOAD
<e> 19.04.2011 19:04:53 snpopsvr_script.cpp(286) 'SuperVisor' <!> CORE EXCEPTION : 14 =
RFC_RC (RFC_EXCEPTION) Exception raised
RFC_ERROR_GROUP (RFC_ERROR_APPLICATION_EXCEPTION) The called function module raised an exception
key=ERROR
message=ERROR
exception=ERROR
<i> 19.04.2011 19:04:53 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 600 [class : <default>] - no params
<i> 19.04.2011 19:04:55 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 812 [class : <default>] - no params
<i> 19.04.2011 19:04:56 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_linuxx86_64 = 79488
[CHECK_LOWERBOUND]
<i> 19.04.2011 19:04:56 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 79488
nREAL_TIME 17
SNP BuildMode Release
SNP Runtime requested 900
tracefile optsvr_trace20110419_190439_2e12.log
<i> 19.04.2011 19:04:56 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
nCPU_TIME 0
nPEAK_MEMORY 79488
nREAL_TIME 17
<i> 19.04.2011 19:04:56 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
<i> 19.04.2011 19:04:56 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...Thanks for the reply...
I was able to manually enter and save an SNP planned order via the planning book.
I have failures where my Input material is UOM=TON and Output is UOM=TON and also where input is UOM=TON and output is UOM=KG. I am able to switch between these UOM's in the planning book and product view.
When I have DEBUG2 on via OPT10 I see:
Message Log:
Input parameters
Customizing Settings
Active BAdI Implementations
Step 1: Data read and model creation started at 16:36:35 on 04/22/2011
Runtime 00:00:00 to measuring point Step_1_Start
Runtime 00:00:01 to measuring point Initializations
Runtime 00:00:00 to measuring point Arc_Read
Runtime 00:00:01 to measuring point SNP_Planed_Order_Deletion
Runtime 00:00:00 to measuring point Procurment_and_Transport_Order_Deletion
Runtime 00:00:00 to measuring point Arcmat_Read
Error occurred when reading data
Trace File:
<1> 22.04.2011 16:36:36 rfc_connection.cpp(631) 'MsgMgr' <rfc> RfcCall for /SAPAPO/MSDP_OPT_UPLOAD
<1> 22.04.2011 16:36:36 rfc_connection.cpp(640) 'MsgMgr' <rfc> RfcReceive for /SAPAPO/MSDP_OPT_UPLOAD
<2> 22.04.2011 16:36:38 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<2> 22.04.2011 16:36:40 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<2> 22.04.2011 16:36:42 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<e> 22.04.2011 16:36:43 snpopsvr_script.cpp(286) 'SuperVisor' <!> CORE EXCEPTION : 14 =
RFC_RC (RFC_EXCEPTION) Exception raised
RFC_ERROR_GROUP (RFC_ERROR_APPLICATION_EXCEPTION) The called function module raised an exception
key=ERROR
message=ERROR
exception=ERROR
<i> 22.04.2011 16:36:43 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 600 [class : <default>] - no params
<i> 22.04.2011 16:36:43 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 812 [class : <default>] - no params
<i> 22.04.2011 16:36:43 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
Thanks again! -
Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6
Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave -
Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success. Also, the bluetooth function stopped working.
Hi, EJ13.
I see you are having issues with backing up you iPhone and have tried a couple troubleshooting steps. There are a couple more steps I could recommend in the article below.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Regards,
Jason H. -
Problem Description:
ODBC functions SQLExecDirectW and SQLExecute functions return error:”DIAG [22001] [Microsoft][SQL Server Native Client 10.0]String data, right
truncation (0) “. When we enable tracing in the ODBC administrator, in the SQL.log we see that values for the arguments: ColumnSize, BufferLength, and StrLen_or_IndPtr of ODBC function SQLBindParameter are not being displayed.
Environment Used:
OS: Microsoft Windows Server 2003 R2 Standard x64 Edition.
Complier: Microsoft Visual Studio 2008 SP1 for x64.
Database: Microsoft SQL Server 2008
MDAC: Microsoft Data Access Components SDK 2.8
Note: This problem is seen only in our 64bit application. However, in 32bit
SQLExecDirectW and SQLExecute functions return successfully.
As we could not find the values of 6<sup>th</sup>, 9<sup>th</sup> and 10<sup>th</sup> arguments(ColumnSize,
BufferLength, and StrLen_or_IndPtr) passed to
SQLBindParameter in the ODBC traces for 64bit, we are not sure whether the values for the above mentioned arguments are received correctly by SQLBindParameter or not. This information would help us to debug further. So, could you please let us know why
these values are not displayed.
1)Here is the extract of the SQL.log file for 32bit where the values for SQLULEN , SQLLEN and SQLLEN* are displayed properly:
PR0CNFG 1028-15f0 ENTER SQLBindParameter
HSTMT 0x006FBDD8
UWORD 1
SWORD 1 <SQL_PARAM_INPUT>
SWORD -8 <SQL_C_WCHAR>
SWORD -9 <SQL_WVARCHAR>
SQLULEN 23
SWORD 0
PTR 0x0595EBBA
SQLLEN 46
SQLLEN * 0x05A5FB00
2)Here is the extract of the SQL.log file for 64bit where the values for SQLULEN , SQLLEN are not displayed properly and
SQLExecDirectW function return error:”DIAG
[22001] [Microsoft][SQL Server Native Client 10.0]String data, right truncation (0) “. :
PR0CNFG a78-fe4 ENTER SQLBindParameter
HSTMT 000000000431D2F0
UWORD 1
SWORD 1 <SQL_PARAM_INPUT>
SWORD -8 <SQL_C_WCHAR>
SWORD -9 <SQL_WVARCHAR>
SQLULEN SQLULEN SWORD 0
PTR 0x0000000005364EFA
SQLLEN SQLLEN
SQLLEN * SQLLEN *
PR0CNFG a78-fe4 EXIT SQLBindParameter with return code 0 (SQL_SUCCESS)
HSTMT 000000000431D2F0
UWORD 1
SWORD 1 <SQL_PARAM_INPUT>
SWORD -8 <SQL_C_WCHAR>
SWORD -9 <SQL_WVARCHAR>
SQLULEN SQLULEN SWORD 0
PTR 0x0000000005364EFA
SQLLEN SQLLEN SQLLEN *Hi Nalsr,
From my research, I found:
"[Microsoft][ODBC SQL Server Driver]String
data right truncation" error may be returned from a call to
SQLBindParameter if the size of the string parameter being used is greater than the size of the column being compared to. In other words if the
string size of the <expression> to the left of the <comparison_operator> is less than the
string size of the <expression> to the
right, ODBC may return this error.
The resolution is to make the string size of the <expression> to the
right of the <comparison_operator> less than or equal to the
string size of the <expression> on the left.
It is difficult to track down this type of problem when third party development applications are being used. ODBC Trace can be used to help determine if this problem is occuring.
Here is an example where the customer has submitted a query "select count(*) from type1 where type1 = ?", type1 is varchar(5) and the
data type being passed by the application is char[9].
Here is the relevant portion of the trace. The following information from the "exit" of SQLDescribeParam
SWORD * 0x0095e898 (12)
UDWORD * 0x0095e880 (5)
Maps to the following with the actual value in parenthesis - SQL_VARCHAR Size 5:
SQLSMALLINT *DataTypePtr
SQLUINTEGER *ParameterSizePtr
The "exit" value from SQLBindParameter provides the following
information:
SWORD 1 <SQL_PARAM_INPUT>
SWORD 1 <SQL_C_CHAR>
SQL Data Type SWORD 12 <SQL_VARCHAR>
Parameter Size UDWORD 5
SWORD 0
Value PTR 0x0181c188
Value Buffer Size SDWORD 5
String Length SDWORD * 0x0181c103 (9)
The string length parameter is the length of the
string being bound to the parameter, in this instance there is a size mismatch which results in the SQLError and the SQLErrorW with the message "[Microsoft][ODBC SQL Server
Driver]String data
right truncation" .
Hope this could be helpful.
Best regards,
Halin Huang -
Adobe Functional Content and the Creative Cloud
Hello All
To any Adobe Employee who may read this, can you please get someone at Adobe to take control of this issue and see that the library, templates and all other functional content gets packaged correctly and enabled as a download and "sub-install" for the parent product inside the Adobe Application Manager.
I think as subscribing users we should get better service and direction from Adobe in regards to this functional content. As I type this I have more than 10 tabs open, each one leading to a thread that has something to do with how to install and fix a problem with the Functional Content for After Effects, Premiere Pro and Encore.
See if you can in less than 30 minutes figure out exactly what to do to activate this content by reading these threads:
http://forums.adobe.com/message/4447237#4447237
http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html
http://forums.adobe.com/message/4418591#4418591
http://forums.adobe.com/message/4400620#4400620
http://forums.adobe.com/thread/1006810?start=0&tstart=0
http://forums.adobe.com/message/4511169#4511169
http://forums.adobe.com/thread/1028055?tstart=0
http://forums.adobe.com/message/4417092#4417092
http://forums.adobe.com/thread/1002454
http://forums.adobe.com/message/4417092#4417092
I have been very reluctant to do anything because I am reading a lot of conflicting and incomplete information. This link in particular, http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html, is really unhelpful because there are 3 methods to do something but reading it I am not sure if each method does the same thing or if each does one part of the 3 sets of missing Functional Content. Additionally "solution" 3 presents a place to put the content but then leaves out the path we are to do it to.
Most disappointing is the fact that the first "solution" did not get me the menu buttons I am looking for in Encore and I don't know if I screwed up or if the install was incomplete for some reason.
Do I now need to install one of the other "solutions"? Those of you in the community that are about to hit reply, please don't. Do not answer that question.
Here is why...
Adobe is responsible for delivering us customers a product. It is Adobe's responsibility to fix the mess that a number of paying customers are having regarding this Functional Content.
TO ADOBE:
Here is what I and I think a lot of other subscribers want you to do:
You already have a Solution in place. One that doesn't require a lot of user intervention and doesn't require anyone to pick a "solution" and screw it up, search for more help and spend hours of their time fixing a mess.
Adobe Application Manager. Create the proper installation packages. Put them on the servers, tell the AAM how to clean up the mess any users who have tried these "solutions" have made. Then have it install the proper packages as a "Sub-Installation" for each of the parent software that it is for.
This solution will not only make things better for us end users, but you will also make the manageability of the Functional Content easier for your teams as well. And if your teams wanted to add additional Functional Content to any program that is part of the creative cloud or that the Adobe Application Manager manages, then it would be a simple matter of creating an installation package and adding it to the AAM's list of installable programs.
You just did this exact thing with Lightroom 4.1! Why can you not do this for the Functional Content?!?
Back to the Community Members that want to answer my post. Don't. Instead if you agree with me or even if you don't, sign off on this thread or indicate your virtual thumbs down. Either way I don't want an answer, I want an action from Adobe, the only ones who can fix the mess.
I really believe that the Application Manager is the most elegant solution. If any of you have ever used Steam, you know what a great feeling it is when you can download a game demo, try it, buy it and just have everything take care of itself. I don't even have to worry about updates; Steam takes care of my games. And the thing that makes it really valuable? I DON'T PAY $50 A MONTH TO USE STEAM AND HAVE IT JUST WORK, IT IS FREE!
All I want at this point is Functional Content that I don't have to read a 50+ page manual to install. I know that is an exaggeration, but honestly if it is 1 badly written set of instructions or 50 what does it matter? I don't pay Adobe so I can read up on how to install their software; I just want to use it.
I guess I should also point out that this is now the second large hold up to my project that I started subscribing for. The first was a problem that I again had to figure out the solution to by working around it, when again Adobe seems to be unable to correct the problem, here, here, here and here.
And now here I am again at a slight stand still because I can't use my DVD authoring software to create a button on a Wedding DVD menu.
Okay, you can go ahead and reply... but I would still prefer no answers, just /agree or /disagree.Did you even read the post?
Jeff A Wright wrote:
For now though please reference Library, title templates, template projects missing: Premiere Pro, After Effects, Encore CS5 - CS6 - http://helpx.adobe.com/x-productkb/multi/library-functional-content-mi ssing.html for information on how to obtain the additional content.
Have you read the page in your link?
Can you correctly install from the instructions on that page?
And I quote:
Additional Solution: Install the Resource Central library content
Download the extra library content
Choose your language to begin the download:
English French German Japanese Italian Spanish Korean
Extract the Library content to the Library folder
Extract the zip file that you just downloaded. This will create a .7z file, eg. en-US.7z.
Extract the .7z file to any convenient location, eg. Desktop. This will create a folder based on the language you selected.
Copy the contents of the language folder (eg. en-US) to the following location:
Keywords: cpsid_85388
Where? Copy the contents to where? I don't see a path written there... is it a secret? Do I have to highlight the hidden text? Nooo... that didn't work...
Honestly I must appologize for my brashness and sarcastic attitude. I find it questionable to expect the paid subscribing creative but not technically inclined customers to do the work of fixing this problem when Adobe has the means and the tools to fix it for us.
Jeff Bellune wrote:
Not an employee, but I am a forum moderator. Please stop spamming the forum with links to this topic. They have all been deleted.
Jeff
Ok. Fair enough, I will admit that last night in my anger and frustration I was being a little childish.
But as a Community Professional don't you believe that you would be better served by Adobe if they were to make one easy simple Adobe Application Manager download for the content that should have been published right at the launch of the new version? Wouldn't your time be better spent actually working on your projects rather than fixing Adobe's mess and responding to people in 10 different forums trying to help them?
All of this also makes me wonder how Adobe prioitizes the "bugs" that people are dealing with. Wouldn't it be quick to put a someone or a couple of people on the problem of gathering the functional content and getting them to package it and ready it for publishing through the AAM? The process of adding it to the list of installs might be more complicated but a package that knows where to put the content? I would think that something like this could be give a get it done now priority as it would aleviate a lot of the forum posts and something like the missing export choices in Media Encoder or Premiere Multicamera Issues would take more time due to investigation and so you put them on a priority based on the number of users affected.
It just seems to me that a month after launching a new version is an awfull long time for the publishing of an update to add functional content that was in all the previous versions.
I guess I will stop "ranting" now. Thanks for responding Jeff AW, at least I have official word that there will be some sort of update on this issue. -
IRQ Conflicts and some other issues
I have a K7N2 Delta-L mobo with an XP2400+ and an MSI FX5600-VTDR128, the reason for this question is that I have some problems, the first of them is at the system information page of XP:
=================================================
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003C0-0x000003DF NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003C0-0x000003DF NVIDIA GeForce FX 5600
IRQ 20 Standard OpenHCD USB Host Controller
IRQ 20 NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 22 Standard OpenHCD USB Host Controller
IRQ 22 NVIDIA nForce MCP Networking Controller
Memory Address 0xD0000000-0xDFFFFFFF NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xD0000000-0xDFFFFFFF NVIDIA GeForce FX 5600
Memory Address 0xE4000000-0xE5FFFFFF NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xE4000000-0xE5FFFFFF NVIDIA GeForce FX 5600
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xA0000-0xBFFFF NVIDIA GeForce FX 5600
I/O Port 0x000003B0-0x000003BB NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003B0-0x000003BB NVIDIA GeForce FX 5600
I/O Port 0x0000C000-0x0000CFFF PCI standard PCI-to-PCI bridge
I/O Port 0x0000C000-0x0000CFFF Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3
=================================================
Looking at this it looks pretty bad if you ask me :(
But when I look at device manager I see no conflicts and every device that's listed here does not have any conflicts reported, anyway here are my IRQ (according to System Information)
===========================================
IRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM1) OK
IRQ 5 NVIDIA nForce PCI System Management OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 13 Numeric data processor OK
IRQ 14 Primary IDE Channel OK
IRQ 15 Secondary IDE Channel OK
IRQ 17 Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3 OK
IRQ 19 NVIDIA GeForce FX 5600 OK
IRQ 20 Standard OpenHCD USB Host Controller OK
IRQ 20 NVIDIA(R) nForce(TM) Audio Codec Interface OK
IRQ 21 Standard Enhanced PCI to USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
IRQ 22 NVIDIA nForce MCP Networking Controller OK
===========================================
So, my first question is obvious, what's wrong with my system?, am I missing some BIOS setting?, I believe APIC may have something to do, but this isn't the case because it is enabled (at least it says so in BIOS). I have the latest BIOS for this mobo (5.40)
The second issue is something strange that Sisoft Sandra keep telling me: "SMBIOS/DMI information may be inaccurate", an here's what the help says:
=================================
Notice N224 - SMBIOS/DMI information may be inaccurate. This information is reported verbatim and cannot be checked by Sandra. While brand-name companies set this information most generic manufacturers use generic data that is meaningless. This issue generates more technical support queries than all other issues combined.
Fix: If the information is not correct, check for a BIOS update (clear DMI pool) or fix any errors using the DMICFG tool provided with the board. Alternatively, disable Sandra’s DMI/SMBIOS reporting from module Options.
=================================
Is this "normal"???
Anyway, I hope any of you to be able to help me.
Thanks in advice,
FernandoAlthough I am unsure as to what is exactly your problem, but from what I see everything seems ok
Regarding the Sisoft Sandra remarks, don't worry about it.
Regarding the Computer in Device Manager
Try changing it to
Advanced Configuration and Power Interface (ACPI) PC
This has not given me any problems at all.
Here is my system example
IRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM1) OK
IRQ 5 Standard OpenHCD USB Host Controller OK
IRQ 5 NVIDIA NForce MCP2 IDE Controller OK
IRQ 5 OHCI Compliant IEEE 1394 Host Controller OK
IRQ 5 NVIDIA GeForce FX 5900 Ultra OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 10 Standard OpenHCD USB Host Controller OK
IRQ 10 NVIDIA nForce MCP Networking Controller OK
IRQ 10 NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital) OK
IRQ 11 NVIDIA nForce PCI System Management OK
IRQ 11 Standard Enhanced PCI to USB Host Controller OK
IRQ 11 NVIDIA(R) nForce(TM) Audio Codec Interface OK
IRQ 11 WinXP Promise FastTrak 376 (tm) Controller OK
IRQ 12 PS/2 Compatible Mouse OK
IRQ 13 Numeric data processor OK -
Problem with DMGs and error: "No Mountable File Systems"
Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaiaWhere you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it
-
Suppressing Warning and Error Dialogs in 8.2
All
I am looking into whether or not it is possible to suppress warning and error dialogs within a form created by LiveCycle Designer 8.2. I am aware this functionality is easily configurable within ES2 - which is the driver behind why I would like to get it working in some form within 8.2. Essentially, I would like no dialog boxes to appear unless explicitly done so via script.
Any ideas?Just thought I would reach out one last time on this topic. To be more specific, I am looking for a means by which to "turn off" dialogs within a Designer 8.2 form. I still wish to use Validation patterns and perhaps Validation scripts but I don't want any dialog boxes to appear should any pattern or script be violated.
Any help would be appreciated.
Thanks in advance! -
Functional area and cost of sales accounting (company code 2000) active
Hi There!
I hope someone can help.
In our sandbox system, whenever I try to convert a Purchase requistion into a Purchase Order I get the following error message : "Functional area and cost of sales accounting (company code 2000) active".
Anyone know how I can resolve this issue?
Kind regards,
KarlHi,
Double click on the error message & check the message Number..
Then go to
Spro>MM>Pur
Attributes of system messages & change the Message from Error to Warning..
Thx
Raju -
New LUN Takes A long Time To Format and Errors Out
Good afternoon,<o:p></o:p>
I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be provisioned
to my Hyper-V cluster in the size of 500GB. Here is my problem:<o:p></o:p>
1. Formatting of a 500GB LUN (with quick format selected) should not take more than a few seconds. Instead, the quick format takes about 2hrs if not longer. I have actually
seen it go for half the day.<o:p></o:p>
2. Once the formatting has completed (no errors), taking the formatted LUN offline freezes the Computer Management screen and shows the status (Not Responding). This
will take place for 30 minutes or less and show that the LUN has been taken offline.<o:p></o:p>
3. In the Failover Cluster Manager, detecting the disks takes about 15 minutes. Once the available LUNs have been detected I can add the 500GB LUN to the Disks screen
without any problems.<o:p></o:p>
4. While in the Disks screen, adding the LUN to the Clustered Shared Volumes takes about 5 minutes (too long).<o:p></o:p>
Already seeing that there is a problem, I went ahead and used the Hyper-V Manager to create a 200GB vhd on the new LUN which has been added to the CSV. The bar indicating
the progress of the vhd creation does not display any progress (no green progress bar appears, not even a tiny bit of it) and after 3 hours (more or less) I receive an error, stating that the creation of the vhd failed.
<o:p>NOTE: The vhd shows up in Volume 9 (LUN 15) but I can only bet that it will not work, plus I would not want to work with a vhd file which failed during the
creation process.</o:p>
<o:p>Long story short, I repeated the above steps to see if that was a temporary problem, but it is not. The same problem occurs no matter which Hyper-V cluster
node the operations are performed on. I would like to add, that I tested the creation of a vhd on an already configured LUN and the creation was completed successfully, and within a n expected time frame.</o:p>
NOTE: When LUN 15 errors out, it's status shows "Failed" in the Failover Cluster Manager. This in turn, causes the re-scanning of available disks to take forever (in Computer Management) and it keeps searching. Pretty
much, the fail of one LUN affects the entire functionality of the entire Hyper-V Cluster.
Errors Listed In Event Details For LUN 15:
1. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and
network connectivity.
Event ID: 5142; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
2. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer available on this node because of 'STATUS_IO_TIMEOUT(c00000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Event ID: 5120; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
3.Cluster resource 'Cluster Disk 5' of type 'Physical Disk' in clustered role '4530acc9-8552-4696-b6c3-636ff8d58c46' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover
Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event ID: 1069; Source: Microsoft-Windows Failover Clustering;Task Category: Resource Control Manager
4.
Cluster resource 'Cluster Disk 5' (resource type 'Physical Disk', DLL 'clusres.dll') did not respond to a request in a timely fashion. Cluster health detection will attempt to automatically recover by terminating the Resource Hosting Subsystem (RHS)
process running this resource. This may affect other resources hosted in the same RHS process. The resources will then be restarted.
The suspect resource 'Cluster Disk 5' will be marked to run in an isolated RHS process to avoid impacting multiple resources in the event that this resource failure occurs again. Please ensure services, applications, or underlying infrastructure
(such as storage or networking) associated with the suspect resource is functioning properly.
Event ID: 1230; Source: Microsoft-Windows FailoverClustering;Task Category: Resource Control Manager
Any and all help will be appreciated!Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
Hi there, I work for a company where we have a wired lan and a wireless lan. The wired lan is 192.168.97.* and the wireless is 192.168.98.* When connected to the wired LAN, we are able to see all shared machine who are also on the .97 subnet. When co
-
How can I change the size of a card in iphoto?
I created a card using iPhoto. The default size is too small. How can I make it bigger. Thanks
-
I have an old display "LG Flatiron L222WS" and a MBK Pro Retina. The display have only vga output and i have a converter from vga to hdmi. Whenever i connect the hdmi to the computer, i can extend or mirror display. The problem is that no picture is
-
Fake Adobe 24/7 help tech's
Hi: This is a warning. I posted an issue here on Friday and was contacted on Saturday via e:mail. The claimed to be with Adobe24/7 help requested to connect on Skype messaging. The icon on the Skype was Adobe helps. This tech and one that pho
-
hi all, i am facing a problem with a ejournal site i developed in coldfusion.. the site features download of the pdf form of the journal through the site... i have done this with cfcontent and cfheader.... the problem i am facing is that the download