Content Engine with ICAP v1.0 support for AV

I have a requirement to host a web service that will allow subscribers to submit certain documents (.doc, and .pdf). Before these documents hit the web server i would like to scan the files using an AV server.
Is it possible for me to do reverse-proxy caching, and use ICAP to pass the documents to an AV server such as Trend, and then if clean forward the documents on to the web server ?
Phil

There seems to be a host of issues when using a proxy with v5 of Windows Update:
http://communities2.microsoft.com/communities/newsgroups/en-us/default.aspx?query=proxy&dg=microsoft.public.windowsupdate&cat=en_US_56d1dd45-de9e-4fc5-9bc1-2d1d0de6daee〈=en&cr=US&pt=a5b74b1a-427e-4684-a270-294000352edb&catlist=93e29c6e-09cd-400c-8ac1-71bf1284a66c&dglist=&ptlist=&exp=&sloc=en-us
It looks like v5 tries to bypass the proxy configuration and connect directly to the Microsoft update site(s).
So ... without the proxy involved, you may want to start by checking for routing and/or access control issues. A sniffer trace in front of the client would definately be of some use.
~Zach

Similar Messages

  • How do I speak with someone from tech support for a issue??????

    I have tried many times to download the correct software for my HP OfficeJet 7410 printer. I always get a error message. "THE SYSTEM CAN NOT FIND THE FILE SPECIFIED". ("C:\Users\R61\AppData\Local\Temp\7z611S7\Setup\..\Setup\Blocksysus...) What is that???. Their wesite is of no value to help me. In frustration, then I tried to buy the driver software. Again, they could not help. I used to be able to print. Using their website, I was able to test print and test scan. All is well with that, so why can I not print? I have two other computers that are connected and print fine. My laptop will not print. It used too. Why are my downloads of the correct software not allowing the install of software?

    JDMAN
    The problem is likely one having to do with a previous installation failure or a minor corruption - a misplaced instruction, a bad link, something in the File System on the computer that is not where it belongs.
    Regardless, the issue is not likely the fault of the Full Feature Software.  That does not mean the computer is bad, it means that there is situation present on the computer that the normal installation program cannot handle.  Programs are smart, but there is a limit to what can be done during a standard installation.
    You can certainly call HP:
    Contact HP – USA - Phone Assistance
    List of
    HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
    Including UK and Europe
    Warranty Required – USA and Canada
    USA – Contact HP // Self-Help – Email - Chat
    ====================================================
    You can, if you like, take a look at the following Post:
    From pcwizard  for Windows 7
    Solved - Install Error "The system cannot find the file specified" (hpzprl40.exe)
    The solution likely fits your situation.  Do understand that where the Post suggests the member install the Full Feature Software, that you would install / work with the Full Feature Software for your printer:
    HP Officejet 7410 All-in-One Printer Drivers
    The entire Post is lengthy; contains much in the way of repeated content, does not always stick the the subject at hand, and also contains some devisive comments that, frankly add nothing to the constructive solution.  You may take away from it as much or as little as you feel is useful for your situation.
    One of the last entries in that lengthy regale regards Windows 8.x -- the contents might be useful to Forum members running Windows 8.x:
    Printer Installation in Windows 8.1: 'System cannot find file specified' Message
    NOTE from JonW: In addition to the details in this document I would recommend TURNING OFF REALTIME SCANNING when you have MCAFFEE LIVESAFE 2014 installed.
    =======================================================
    Option - Install from the Device Manager
    This is an alternate method to install the Driver that may be useful under some conditions. In the context of this overall procedure, it is necessary to have at least downloaded the software from the Printer’s support pages (so that the software package is located somewhere on the computer).
    Control Panel > icons > Device Manager > Imaging Devices >
    Right-Click on your Printer >
    Update Driver Software > Browse my computer for driver software >
    Let me pick from a list of device drivers on my system >
    If applicable:  Select the proper device Version from the list >   Next
    You may be presented with a prompt asking permission to install the Driver:
    Select Install to continue
    Restart / Reboot the computer and log in
     =======================================================
    I am not a Printer Expert.
    I hope this helps.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Hugely disappointed with Apples lack of Support for iPhone 3G

    I am so very disappointed in Apples lack of response or help regarding the OS4 and iphone 3G.
    Originally a hugh support of Apple's philosophy and product, I find myself questioning their values and ulterior motives.
    Currently, I have an iphone 3G 8GB. It worked like a dream until I installed the OS4. Like other forum members, my phone freezes, sputters, chokes and does all sorts of unusual oddities. I have gone to the Genius Bar at Apple only to be told that, it works fine for everyone else, excluding me and that basically, there is nothing that they can do about it.
    I bring to their attention that on the actual Apple forum, there are others' like myself complaining of the same things! The response I get is that, people on here are not genuine and that you can't believe everything you read. Are they for real? The other responses that I get is to, reboot 3 to 4 times a day, restore, restore to factory, and to wait for the update of OS4.
    But if OS4 is the culprit then how can it accommodate my iphone 3G?
    Oh and the best response I get from the Apple store is, "if you are unhappy with your phone, you can upgrade to the iphone 4"!
    Just recently, I did as told, and updated the OS4 on my phone.. and guess what!? It is worse off than it was previously. I just find it ironic that Apple refused to acknowledge the fact that this operating system (OS4) is rubbish for 3G users.
    IM STILL WAITING FOR APPLE TO MAKE IT RIGHT

    I can only agree with the above. My iPhone 16gb was fine and after my Wife my best friend to be honest. I've never had a more useful piece of i.t. kit and it's really made a difference to my lifestyle.
    My wife's is still on 3.1.2 and comparing our two phones mine *****. My fault for not listening, but you sort of trust Apple until they let you down. OS4 was total crap, 4.0.1 still poor. It's barely faster and several thumbnail photos have gone from the camera roll. Listen to us Mr Jobs!!!
    Your iPhone is not like normal phones. Your customers do not simply discard it for a new one, they may well buy a new version, but the old one will pass between family and friends and still be expected to function well many years hence. My current phone is earmarked for my son, my wife's for my daughter and so on as we renew our contracts. We EXPECT these things to work properly, and if you want loyal Apple customers to be retained you must support your older models fully.
    A 10 year old with his Dad's old 3g used as an iPod, will be more likely to get a newer iPhone or iMac later on.

  • VBScript editor with Intellisense/Code Hinting support for Adobe App

    I am looking for some tool to write my InDesign VBScript files in. I would really like to know if there is any which support Intellisense/Code hinting for Adobe programs (InDesign especialy). Do you have anything to recommend?
    I am quite good at hacking my computer, so no registry change etc. is a problem for me, I just can not find any. I already tried PrimalScript 2009 but it doesn not work.
    What I need is that in following block of code
    Set myInDesign = CreateObject("InDesign.Application.CS4")
    Set myDialog = myInDesign.Dialogs.Add
    I will get list of all methods/properties after I write the dot after "myInDesign" in second line. But it never worked. I even tried to put "InDesign.Application.CS4/C:\ProgramData\Adobe\InDesign\Version 6.0\cs_CZ\Scripting Support\6.0\Resources for Visual Basic.tlb" line into Options>Text editor>Type libraries.
    I am using Windows Vista SP1 and I have Adobe Creative Suite CS4 installed (upgrade from CS3 which was upgraded from CS2)
    Thanks a lot for any help/suggestion, as I start feeling desperate.

    Hi Everyone!
    As I have said, I waited for next service release, which is as of now PrimalScript 2009 version 5.0.614 and I did some testing with it.
    Results:
    WinXP EN Professional
    - Just pointing PrimalScript 2009 to typelib, no creative suite installed, working
    - Installed Creative Suite CS3 Czech (trial mode) - Working, no need to setup anything
    - Installed Creative Suite CS3 + CS4 Czech (trial mode) - Need to point PrimalScript 2009 to correct typelib, then 100% working
    Windows Vista SP1 Ultimate EN (in trial/not activated mode)
    - Just pointing PrimalScript 2009 to typelib, no creative suite installed, working
    - Installed Creative Suite CS3 Czech (trial mode) - Need to point PrimalScript 2009 to correct typelib, then 100% working
    - Installed Creative Suite CS3 + CS4 Czech (trial mode) - Need to point PrimalScript 2009 to correct typelib, then 100% working
    Windows 7
    I am not planning to use Win7 in near future, so I did not not run any test on it.
    Windows Vista SP1 Home Premium Slovak (fully activated)
    - Installed Creative Suite CS3 + CS4 Czech (full mode) - Not working. This is my main machine. It is Creative Suite CS2 upgraded to CS3 then CS4 (it is running for years without reinstall). I use CS3/CS4 side by side for some older projects. There are still references to CS2 in registry. I tried pointing PrimalScript 2009 to correct typelib, but to no avail. My conclussion is that there is someting messed with its config or registry, but I am pretty sure it would run after complete system reinstall.
    Both WinXP EN Pro and Vista SP1 Ultimate EN were clean install into MS Virtual PC 2007, with only Creative Suite and PrimalScript 2009 5.0.614 installed into each machine so I made sure there are no other issues involved.
    As I spend 80% of my time with developement of websites and scripting of MS Office/Creative Suite, I have some virtual machines set up for testing purposes. I will use one of them for development in PrimalScript and move it to main (real) Windows Vista Home Premium Slovak installed once I will decide to completely reinstall it. The need for seting up the typelibray link is no deal for me, as it is working as expected then, and I expect a lot ;-)
    So problem solved, I found o program I will use. There may be others which do better or are cheaper (but I do not know about any) but $299 is not a big issue when I get what I want.
    P.S.: The solution with making VBScript code with VBA declaration (using Dim) is not a solution I like, as I would need to comment it out everytime I run/edit  the script and it would be pain in the *** while debugging it as i would need to do lot of comment/uncomment cycles and i can use my ime better then doing the monkey work as some fo the scripts I write are quite huge and I prefer to build them incrementaly and test/debug a lot.
    I wish to thank everyone for their help and suggestions,
    Matus

  • Fed up with Adobes lack of support for PS12.

    I Purchased PS 12 this past August and I soon found that PS 12 is no longer supported by Adobe.  My warranty has also expired.  Since purchasing the product I have had many problems causing me to spend many hours listening to videos, waiting for answers in published forums.  The basic problem that I have is that PS12 cannot communicate with Revel Premium.  I cannot transfer photos, of which I have thousands, between PS12 and Revel Premium.  For approximately three weeks after purchasing PS 12 and Revel I could transfer photos to and from PS 12 and Revel but this no longer is possible.  What happened?  Should Adobe upgrade me to V13 at no cost?  Does Adobe have someone who will address this problem and solve this issue?
      My patience has expired.

    I Purchased PS 12 this past August and I soon found that PS 12 is no longer supported by Adobe.  My warranty has also expired.  Since purchasing the product I have had many problems causing me to spend many hours listening to videos, waiting for answers in published forums.  The basic problem that I have is that PS12 cannot communicate with Revel Premium.  I cannot transfer photos, of which I have thousands, between PS12 and Revel Premium.  For approximately three weeks after purchasing PS 12 and Revel I could transfer photos to and from PS 12 and Revel but this no longer is possible.  What happened?  Should Adobe upgrade me to V13 at no cost?  Does Adobe have someone who will address this problem and solve this issue?
      My patience has expired.

  • Help with custom page size support for non standard paper

    Firstly, we appreciate any support you may be able to provide, we have already thrown considerable effort at this and it has been very time consuming and frustrating.
    To support a number of business functions need to print to (non standard) continuous and mulitpart paper on a dot matrix printer. The (test) Mac is a 10.4.11 G4 laptop, the printer is an Oki Microline 520 (9 pin 80 column, IBM Proprinter, Microline or Epson FX personalities with a parallel interface) which has been networked via a HP JetDirext Ex Plus print server. That part appears to be operating correctly.
    We have tried a number of drivers / printer personalities with varying levels of success:
    ESP / EPSON 9-Pin Series CUPS v1.1 / Epson FX personality
    ESP / OKIDATA 9-Pin Series CUPS v1.1 / Oki Microline personality
    Ghostscript / epsonc / Epson Dot Matrix Foomatic PPD / Epson FX personality
    Ghostscript / ibmpro / IBM ProPrinterII Foomatic PPD / IBM Proprinter personality
    Ghostscript / okiibm / Oki Microline IBM compatible 9 pin Foomatic PPD / IBM Proprinter personality
    There were no appropriate drivers in Gutenprint (5.2.3 version) The most successful is the okiibm / Oki Microline IBM compatible 9 pin settings, it can print A4 and honors the Printer Features Resolution settings in the print dialogue.
    Q1: Should we see anything in the Printer Info / Installable Option, it is always blank ?
    The issue is custom page sizes, we can manage / add Custom Pages Sizes via the Page Setup / Paper Size interface and they draw on the screen OK but they do not work at the printer (various issue at the printer such error messages, junk printing and wrong orientation):
    Q2: Are we heading in the right direction or is there a better way to handle this ?
    Q3: Would 10.5 solve all our problems, are the print drivers any better ?
    Q4: Is this the correct way to specify custom page sizes, is this all we need to do ?
    Q5: Is so how do we get the driver to respect the size, do we need another filter or something ?
    Q6: Is it possible to add (by hand) custom page sizes to the ESP drivers or Foomatic PPD files so they they appear as a "standard" offering in the Page Setup / Paper Size interface ?
    Sorry for the long / complicated post and thanks in advance for any advice / assistance.

    Matt Broughton wrote:
    Testing on 10.5.7, Tried both Oki 9-Pin Series 1.3 / Microline personality (no joy) and Epson 9-Pin Series 1.3 (this is a much better driver than 1.1) / Epson FX personality but not much joy with custom page sizes,
    The Oki 9-pin Series 1.3 and the Epson 9-Pin Series 1.3 should produce the same results. The only difference in the PPDs is the printer model name.
    After some testing, I find that the output is not the same despite the two PPDs being virtually identical. I did spot in the CUPS source code for the rastertoepson filter that there is some model name matching for Epson printers. Thus I can see where the output using the Oki 9-pin PPD could be different than when using the Epson 9-pin PPD.
    but again once I imbedded the page size into the ppd some (but frustrating) luck. I can get it to respect the paper orientation and it prints well but I could not get the form length to work properly. At best over a print run of 7 labels it would creep up the label by about 0.1 inches / 2 mm.
    Just for the fun of it, I made some additions to the Epson 9-pin 1.3 PPD. All I can say is that I could print a job to file. I have no way to know what it would look like on paper.
    I did find that using a custom paper size did add some unwanted margins to the output bounding box. Putting the custom page size into the PPD seemed to get around that issue.
    I added the following lines to the Epson 9-pin PPD 1.3--
    <pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
    *PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
    *ImageableArea Label1/Label1: "0 0 288.00 107.80"
    *PaperDimension Label1/Label1: "288.00 107.80"</pre>
    This adds a paper size with the 4 inch (288pt) width and 1.5 inch (107.8pt) height. That represents the 1.4 inch label and the 0.1 inch gap between labels. I set 0pt margins except for the bottom where is set the 0.1 inch (7pt) gap as the bottom margin.
    The full diff in context is--
    <pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">loki:~ matt$ diff -u /usr/share/cups/model/epson9.ppd ~/Desktop/epson9.ppd
    --- /usr/share/cups/model/epson9.ppd 2009-02-20 20:16:53.000000000 -0600
    +++ /Users/matt/Desktop/epson9.ppd 2009-06-06 20:37:06.000000000 -0500
    @@ -42,6 +42,7 @@
    *PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
    *PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
    *PageSize FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
    +*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
    *CloseUI: *PageSize
    *OpenUI *PageRegion/Media Size: PickOne
    *OrderDependency: 10 AnySetup *PageRegion
    @@ -50,17 +51,20 @@
    *PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
    *PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
    *PageRegion FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
    +*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
    *CloseUI: *PageRegion
    *DefaultImageableArea: Letter
    *ImageableArea Letter/US Letter: "18.00 18.00 594.00 774.00"
    *ImageableArea Legal/US Legal: "18.00 18.00 594.00 990.00"
    *ImageableArea A4/A4: "18.00 18.00 577.00 824.00"
    *ImageableArea FanFoldUS/US Fanfold: "18.00 18.00 1053.00 774.00"
    +*ImageableArea Label1/Label1: "0 0 288.00 107.80"
    *DefaultPaperDimension: Letter
    *PaperDimension Letter/US Letter: "612.00 792.00"
    *PaperDimension Legal/US Legal: "612.00 1008.00"
    *PaperDimension A4/A4: "595.00 842.00"
    *PaperDimension FanFoldUS/US Fanfold: "1071.00 792.00"
    +*PaperDimension Label1/Label1: "288.00 107.80"
    *MaxMediaWidth: "1080.00"
    *MaxMediaHeight: "86400.00"
    *HWMargins: 18.00 18.00 18.00 18.00</pre>
    I don't know if that will help you or not. Let us know what sort of progress you make.
    Matt

  • Windows AD with Kerberos authentication not supported for NW AS JAVA 7.1

    The Admin guide for BO 3.1 states that Windows AD with Kerberos authentication is not supported on NetWeaver AS.
    Can anybody suggest & confirm on this???

    I know we haven't been receiving cases for it, but I think in theory it should work fine. BO doesn't really care what web/app kerberos comes from as the manual authentication uses the java SDK (i.e tomcat 5.5 would use Sun JDK 1.5), and SSO kerberos (vintela) uses 3rd party libraries. It's possible our 3rd party libraries may not support netweaver yet. If I hear anything else I'll post.
    Regards,
    Tim

  • Building gVim with Ruby and Python support (for Windows)

    I would like to build gVim 7.3 with Ruby (1.8.7) and Python (3.2) support. For 32-bit Windows using 64-bit Linux.
    So, I downloaded everything what I need (ruby, python and vim sources), I installed mingw32 packages. Next, I modified vim makefile src/Make_ming.mak (as described here: http://people.smu.edu/jrobinet/howto/co … indows.asp) by adding ruby and python patches and versions.
    Finally, I tried to compile this:
    cd /tmp/vim/src
    make -f Make_ming.mak gvim.exe
    and I get quite strange result:
    make -f Make_ming.mak gvim.exe
    gcc -c -Iproto -DWIN32 -DWINVER=0x0500 -D_WIN32_WINNT=0x0500 -DHAVE_PATHDEF -DFEAT_BIG -DHAVE_GETTEXT -DHAVE_LOCALE_H -DDYNAMIC_GETTEXT -DFEAT_CSCOPE -DFEAT_NETBEANS_INTG -DFEAT_GUI_W32 -DFEAT_CLIPBOARD -DFEAT_MBYTE -DFEAT_MBYTE_IME -DDYNAMIC_IME -DDYNAMIC_ICONV -pipe -w -march=i386 -Wall -DFEAT_RUBY -I /tmp/ruby/lib/ruby/1.8/i386-mswin32 -I /tmp/ruby/include/ruby-1.8 -I /tmp/ruby/include/ruby-1.8/i386-mswin32 -DDYNAMIC_RUBY -DDYNAMIC_RUBY_DLL=\"msvcrt-ruby18.dll\" -DDYNAMIC_RUBY_VER=18 -DFEAT_PYTHON -DDYNAMIC_PYTHON -O3 -fomit-frame-pointer -freg-struct-return -s blowfish.c -o gobj/blowfish.o
    blowfish.c:1:0: error: CPU you selected does not support x86-64 instruction set
    blowfish.c:1:0: error: CPU you selected does not support x86-64 instruction set
    make: *** [gobj/blowfish.o] Błąd 1
    I'm a little confused, I use 64-bit Linux (C2D E6750 processor), but I want to build 32-bit program using 32-bit compiler, so why I need 64-bit instruction set? Any suggestions?
    I'm not very familiar with compilation. It is a good way to build custom gVim?
    Last edited by n0rv (2012-09-01 21:21:03)

    I was surprised too.
    Is very strange for me that a company like Nokia is currently supporting only 2 operative systems, as Vista and Xp and nothing more.
    I have also Win2000 in a partition and I have no intention to buy new OS from Microsoft. I'm using Linux (Ubuntu) and I hope that Nokia will be really open to support soon also Linux or MacOS etc.
    The market is moving more and more in the open source software and there are lots of advanced big spender users that don't want to use Microsoft software.
    If Nokia will not change the mind I'm expecting many users, as me, will move to Linux based phone instead of Nokia for the future.
    In this particular case I was able to upgrade my phone just in time, using the previous version of NSU but now, to do the same upgrade (same phone, same firmware) I'm forced to use the new NSU version which is not compatible anymore with Win2000.
    Why I cannot continue to use the same version if it can work properly? Will Nokia will consider a patch or some version which can be compatible with Win2000? What about Linux?
    Thank you

  • Beyond frustrated with the lack of support for this phone

    My title says it all...  I've had this phone since sometime in August, and at the time we signed up, we were "upgraded" from the freebie phones into three of these phones, one each for myself, my wife and our daughter.  These phones are slow, laggy and do not perform well, despite being powered by 1ghz processors.  http://gizmodo.com/5890956/the-full-list-of-verizon-phones-getting-ice-cream-sandwich - this article dated in MARCH says ICS for the Verizon Rhyme is coming, yet 9 months later we're still on the same version, which is extremely outdated software.  Verizon won't help us in upgrading to the Galaxy S3 without paying $650 per unit, and I'm not eligible for anything for a year and a half.  As a new customer, I feel VERY MUCH locked into a situation I don't like and I have no options to make it any better.  I can't get out of the phone making me unhappy...  the promised ICS update is lost in never never land... and it's forever and a day away before I'm eligible for an upgrade that's not gonna force me to take out a 2nd mortgage. 
    I've read questions here about this phone and it takes 7-20 days for Verizon to even respond, which points out just how interested they are in addressing the many angry customers with this lemon. 

    Yeah  I feel your pain!  I have had a rhyme for about 1 year and have had nothing but problems.  They traded the phone for me due to the problems, got a refurbished one which has proven to be no better than the one I had.  I have spent hours on the phone with verizon in attempts to fix things.  One time they even had to get a company person(phone manufactureer) on the line to help me.  Yes this is a very poor product with many many issues.  Verizon should really do something to help all us loyal verizon customers (I have been a customer since verizon was air touch) out.  UGH!!!

  • What is the problem with Adobe Customer/Tech support for Premiere Pro?!?!?!

    Today Adobe closed the NINTH support ticket - since mid-January - on my problem with Premiere Pro CC - it crashes on startup (just after the splash screen loads). From what I gather on here, I am not alone with this problem. It's apparently rather common!
    I've left message after message and, as I said, NINE tech support tickets (most recent #0185443350). All have been closed or withdrawn without ANY help, reply or solution. Yet my monthly Cloud charge is reliably withdrawn from my bank account!
    I need access to a working program! I use this in my studio business and my customers have been waiting since the end of January! This is now costing me money and customers!
    Adobe - Apparently you don't particularly care about your customers. I am NOT impressed and, at this point, I'm starting get a little pissed off. It's been almost six months and.....NOTHING!
    And YES, all of my drivers are up to date, etc. I've reinstalled. Updated drivers. Etc etc etc, ad nauseum!
    NOTHING WORKS!
    -Rowen Poole

    Hi Rowen,
    I sent you a PM. I hope I can help you resolve this issue.
    Thanks,
    Kevin

  • Does Lion interfere with Excel 2011 language support for Korean, Chinese?

    I was able to use Excel 2011 for several languages including Korean and Chinese when I was on Snow Leopard.
    Now, after upgrading to Lion, I can't figure out how to get that functionality.
    I have used the Microsoft Language Register to get the Japanese character set to appear correctly.  What do I need to do to get the other character sets to appear?

    I'm copying data out of a multi language database and pasting into excel.  On Snow Leopard I was able to paste Korean and Chinese characters into excel.  Now, I get a box with a small in the place of Chinese/Korean characters.
    I'm sure this is a matter of just not having a setting set properly, but I can't find it and I can't find anything online about it.

  • Content Engine with Windows Update site

    We are using a couple of CE's load balanced by a CSS for a proxy. Recently we have noticed that some users have been unable to use the proxy to download Critical Updates from Microsoft. When we turn the proxy off everything works fine. Has anyone ever seen this or have any ideas of what the problem might be?(ce7320-5.0.17)

    There seems to be a host of issues when using a proxy with v5 of Windows Update:
    http://communities2.microsoft.com/communities/newsgroups/en-us/default.aspx?query=proxy&dg=microsoft.public.windowsupdate&cat=en_US_56d1dd45-de9e-4fc5-9bc1-2d1d0de6daee〈=en&cr=US&pt=a5b74b1a-427e-4684-a270-294000352edb&catlist=93e29c6e-09cd-400c-8ac1-71bf1284a66c&dglist=&ptlist=&exp=&sloc=en-us
    It looks like v5 tries to bypass the proxy configuration and connect directly to the Microsoft update site(s).
    So ... without the proxy involved, you may want to start by checking for routing and/or access control issues. A sniffer trace in front of the client would definately be of some use.
    ~Zach

  • Support for Shared Variables in Third Party XP embedded based TPC's?

    I have deployed an application in an XP embedded based Touch Panel (Third party). The application is working fine, but the shared variables hosted on an RT (sbRIO Board) are not getting updated in the application on TPC
    1. The TPC is part of the project as Windows XP Embedded Touch Panel
    2. NI TPC Service has been installed on the TPC and the application can be deployed remotely from the development PC through ethernet. (Hence network connections and communications are OK)
    3. By using Distributed Systems Manager in the development computer, I can see that the shared variables are getting updated on the network
    I believe that the problem can be solved if the following programs are installed on the TPC
    A. Support for shared variables for XPembedded
    B. Shared Variable engine
    I have tried installing support for shared variables from Program Files > National Instruments > Labview 8.6 > PDA > Utilities > Variables > x86 - but am getting an installation error "Unable to find application manager for Pocket PC applications".
    Shared variable engine has been installed from ve220 folder. The program is getting installed. But the Variable Engine is not started Control Panel > Administrative tools > Services in Xpe, the service is stopped and cannot be started. When I try to start the service, I am getting the following error on TPC
    "Could not start the National Instruments Variable Engine Service on the local computer.
    Error 1053. The service did not respond to the start or control request in a timely fashion."
    Please suggest solutions for the above or alternate locations for the following:
    1. Support for shared variables for XP embedded TPC's
    2. Shared Variable engine installer program.
    Thanks
    Krish
    Solved!
    Go to Solution.

    Problem solved!
    Update for interested folks working on XP Embedded TPC's
    Just to make sure that Shared Variables were indeed accessible to the TPC, I wanted to install Distributed Systems Manager 8.6 on the TPC. However since the TPC was having only 1 GB of DOM (Disk on Memory) and with all the software I had tried, there were only a few Megabytes left on the system. I had to add another DOM of 2 GB.
    All the products of the Installation went fine, with the exception of NI Logos (Version 5.0). NI Logos installation failed repeatedly.  I tried installing NI Logos separately, with the same results. Then I had this gut feeling that NI Logos had something to do with the issue.
    I then downloaded the new version of NI DSM 2009 SP1. Although this was supposed to get installed on any fresh system without Labview, the installation would not proceed beyond the setup stage. I tried installing NI Logos from the products folder on the new download separately and it worked like magic!
    Once the new Logos (Ver 5.5) got installed, the Shared Variable Engine started automatically and the Shared Variables were finally unleashed - free to rise and shine! Thank God Almighty!!
    On the lighter side, come to think of it - for running an application of around 400KB, we need XP embedded, NI Run Time, Logos, DSM ..........  (all around 900MB). Can we make it any simpler?!!  Inviting your comments .......
    Thanks
    Krish

  • Content Engine multicast duration logs

    With Content Engines and CDN solution, we deployed a multicast station (for non-live contents). With the transaction logs we were able to log access to the first connection to the content-engine (as a http connection) but for our customer would be useful being able to track connection time of each client to the multicast station. There's a way to handle this?
    Thanks

    Well I am not sure if this is possible. You could however check the URL that the CE is caching. Here is the link to a document that explains how to do it.
    http://www.cisco.com/en/US/products/hw/contnetw/ps546/products_tech_note09186a008009409e.shtml

  • Content engine DNS question

    We're using the content engines to cache web & ftp traffic.
    If we have multiple DNS servers listed, does the content engine use them from top-down (if not found from 1st, go to next), or in rotation (like round-robin)??
    We have multiple domains that require multiple DNS servers to work together, and there are DNS records that only each DNS server knows about.
    The server I listed on top has records that are more frequently requested, so I'm hoping it's the top-down fashion.

    Content Engines with ACNS 5.1 software can intercept DNS requests that have been issued to DNS servers (forwarders or recursive) that traverse the interception device. Upon receiving a request, the Content Engine transmits that response to the client if it has a current cached response. For more information refer
    http://cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a00801cc94b.html#wp1108669

Maybe you are looking for