Content Server 6.3 integrate with Portal 6.0 possible?

Hi
I have successfully installed Content Server 6.3 to store documents and attachments from R/3 4.6. Now, I want to integrate Content Server with Enterprise Portal 6.0. Does anyone know how to configure the portal so that the documents and uploads in EP will be transferred to Content Server instead of storing it on local?

You can integrate the portal with DMS/CMS by using the DMS connector or DMS repository manager. The DMS repository manager can be dowloaded from sap service marketplace.
Also take a look at:
http://help.sap.com/saphelp_erp2005/helpdata/en/da/e40d3dbd82fe2fe10000000a114084/frameset.htm
There are however some restriction regarding versions.
You could also try to set up a webdav repository manager.
Good luck
Regards
Rasmus
Please do not forget the reward points )

Similar Messages

Domino Mail Server on AIX integrate with Portal

Now My Mail Server is Domino Server.
It on AIX System.
I want integrate with SAP Portal.
But SAP Ticketverifier only work on Win System.
How Can I do?

You can integrate the portal with DMS/CMS by using the DMS connector or DMS repository manager. The DMS repository manager can be dowloaded from sap service marketplace.
Also take a look at:
http://help.sap.com/saphelp_erp2005/helpdata/en/da/e40d3dbd82fe2fe10000000a114084/frameset.htm
There are however some restriction regarding versions.
You could also try to set up a webdav repository manager.
Good luck
Regards
Rasmus
Please do not forget the reward points )

Can google search B2C catalog details if CRM integrate with portal?

hi, guru:
One question:
if CRM integrate with portal, it is possible that search engine(Google) can search catalog details, there is an OSS message and it seems that as long as they make the appropriate settings for web crawling and the page is static they can do that.
However, do you know if a Search Engine would be able to find the B2C catalog information that is sitting within the Portal (as this is framed and I think B2C needs to be non framed to be found)?

Hello Chen,
Barring other issues you may have with (a) the OSS message that explains how to create the crawler indexes for catalog items and (b) the ability to display catalog in Portal, a solution is theoretically possible.
<li>Give the [PCD (Portal Content Directory) URL navigation|http://help.sap.com/saphelp_nw04s/helpdata/en/2d/91e33edd37de63e10000000a11405a/frameset.htm] for the B2C catalog to the crawler generator. This should theoretically publish the carwler indexes with target to the portal PCD URL link for the particular catalog area or catalog item.
*Gotchas to watch out for*:
<li>Proxy, reverse proxy, firewall etc that may be used in the portal / non-portal scenario for external users. I can't give the details of how to solve such issues, but that would require a good consultant. So, plan to consider these in your project plan.
My advise: first check this in non-portal environment to eliminate any issues around the crawler program itself.
Easwar Ram
http://www.parxlns.com

Content Server Report- Document types with file sizes & Status history

Hi
We are about to start with implementing Seal Systems, however we are a global company with to start with 4 content servers in different regions of the world. In order to determine bandwidth for future strategies, I need to know what is stored on each content server in terms of document types, type file and size of files attached to each document type and of course date created and status changes of each document.
In addition we are of course contemplating usage of SAP Cache servers, not only for better responses, but also for backup purposes.
What we are using is SAP ECC 6 with the content servers using MAX DB. I have contemplated creating a Z program in order to return only the required information for import in Excel where I can then manipulate the returned result to a report which fits us.
But before I start with this, does anyone know of any report or tools just to do that within SAP? I have seen these capabilities in other PLM solutions.
I would appreciate any feedback in this regard
with friendly regards
Joe Kosterman

Hi Joe,
maybe transaction DB20 could help you here.
From DMS side tables DMS_PHIO2FILE and DMS_PH_CD1 are most relevant for original data stored in Content Server.
Regarding the changes of documents report MCDOKABL will show you all the changes done for a specific document.
For maintaining and monitoring content repositories please see transaction CSADMIN.
Best regards,
Christoph

Content Server on Virtual Machine with VPN

Hello everybody.
I want to create a test-environment with a Content Server. Regarding to the needed Operating System I decided to use VMware Workstation to virtualize the OS and the Content Server.
Host-OS: Windows XP Professional
Host-IP: 192.17.1.151, Port 1090, not used
Guest: Windows 2000 Server
Guest-IP: 192.168.159.128, Port 1090
Goal: The goal is to log in into the company-network, and connect to the local, virtual Content Server from the central SAP-System.
Network:
With VMware it is possible to use different types of network connections. I decided for NAT. With this it is used to share to host´s IP-Adress.
Furthermore it is possible to create a Port Forwarding so that requests defined ports of the Host are forwarded to the guest/VM. For this I created the following port forwarding in VMware:
1090 = 192.168.159.128:1090
Tests:
Now, I tried if it is possible to reach the port.
1. Command on VM: telnet 192.168.159.128 1090 => Port available
2. Command on Host: telnet 192.168.159.128 1090 => Port not available (That´s okay)
3. Command on Hostt: telnet 192.17.1.151 1090 => Port available
Result:
When I am using CSADMIN to connect to IP 192.17.1.151 port 1090 there is the following error message: "Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED"
Test 2:
I created port forwardings for the following ports: 80, 8000, 8080, 1095, 3200, 3300. Still the same error message.
Test 3:
I tried to use the Content Server directly in the Network without VPN. The Content Server works correctly, but this is not an alternative to the VPN-Connection.
Question:
From VMware-Side everything looks okay. I already discussed this with different specialist from a VMware Forum. But now I need to know, why it is not possible to connect to the Conntent Server. Port is available but it is not possible to connect to the Content Server. Have I forgotten something?

Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
Usually this error shows up when you icm paremeters have not been set, check that icm/server_port_0 is set with value PROT=HTTP,PORT=80
Read,
http://help.sap.com/saphelp_nw04/helpdata/EN/56/2e453cabf4ef6fe10000000a114084/content.htm
Regards
Juan

SAPu2019s content server (DMS) and EDMS with ECC 5.0

Hi all,
I am in the process of setting up SAPu2019s content server (DMS) and would really appreciate some insights as what version I should be installing.
We are currently running ECC 5.0 (640).
I am also interested in utilizing the Easy DMS functionality and would also really appreciate some insight on that as well (version etc).
Please advise?
Regards,
Iqbal

Hi Iqbal,
unfortunately I'm not a Content Server expert. From DMS point of view I would recommend you to use always the latest Content Server patch level (see SAP note 514500). For the decision on the content server I would recommend you to contact your local consulting organisation which will support you in finding the right content server for your business requirements.
Regarding EasyDMS and the version you should use I can provide you the following suggestion. General there are currently three versions of EasyDMS which are 6.0, 7.0 and 7.1.
If you would like to run EasyDMS on Windows 7 PCs too, then you have to use version 7.1 because only this version supports Windows 7. Otherwise I would recommend you to run the latest patch level of verison 7.0
Further I can recommend you to read through the following notes which provide useful information on EasyDMS:
990018 - EasyDMS 6.0 Restriction Note
903827 - FAQ for Easy DMS 6.0
1273919 - SAP Easy Document Management 7.0 Restriction Note
1276709 - SAP Easy Document Management 7.0 FAQ Note
1467697 - SAP Easy Document Management 7.1 Restriction Note
1465763 - SAP Easy Document Management 7.1 FAQ Note
Best regards,
Christoph

Do we need an External Content Server to be configured with OLM

Would like to know if an external content server is mandatory for Oracle OLM on R12.
I have read notes that Content Servers cannot be hosted on the middle tier of Ebiz but have also been told from other sources
that it can be hosted but has some limitations interms of file types supported.
Would like to know if the above is true and if so what are the limitations

Hi Muthu,
An external content server is not mandatory for OLM rel. 12.
You can use an OLM content server, an external content server or any other server that can serve up the content based on URL's.
Oracle does not support an OLM Content Server being hosted on the eBiz middle tier, even if it has been seen to be working in some installations.
Regards
Anders Northeved

SAP Content server will not communicate with MaxDb 7.8

Hello all
For the past few months we have been testing an upgrade from SAP CS 630 to SAP CS 640 and from MaxDb 7.6 to MaxDb 7.8. We are also moving both applications to a new server. We have test the process at least 10 times in the past 4 month and this weekend was go live. We shut down CS and put the database in ADMIN mode to do a backup of the most recent data. The database was transfered to the new server and was restored using Data Manager 7.6. Once the restore was complete, we ran the MaxDb 7.8 upgrade program as ADMIN and it appeard that eveything was ok. One other note, because on the old server the database was approaching the 90% mark, we increased the nubmer of data areas on the new server from 15 to 25. Everything appeard to go ok during the upgrade and I was able to connect to the database using Data Studio. Once we confirmed the database was what we though was stable, we CHANGE THE IP ADDRESS of the new server to that of the old server. We had done this during our testing and eveything appears to work OK with our test SAP instance. Well, this time when we connect to CS via the localhost connection, CS returned that we were on line with SAP, but that we were not connected to the database.
This is what we normally see:
contRep="L1";contRepStatus="data(82%) log(3%)";pVersion="0046";storage="ContentStorage
This is what we saw this morning
contRep="L1";contRepStatus="Online";pVersion="0046";storage="ContentStorage
Not sure what happened, but we ended up going back to the old server until we can determine what went wrong. Does anyboy have any suggestion as to why this could have happened and what we need to do to fix the issue.

Thanks all for the help, but we found the problem. 6 weeks ago we upgraded to ECC 6 and at that time we have a problem with the certificates, so we could not retreive any documents. There is a check box in the CSADMIN configuration that disables the check for the certificate, so we disabled the check. Everything work OK with patch version 9, even when we fixed the certifiactes. For some reason patch 11 did not like that box checked. Once we on checked the box, everything worked fine. Since we want to know why this makes a difference I have opened up a note with SAP to see if they can explain the problem
Thanks again

Http server start-up error with portal

When attempting to start the http server I receive the following error:
[Tue Feb 12 16:14:20 2002] [crit] (10038)(FormatMessage failed with code 317): Parent: WSADuplicateSocket failed for socket 248.
[Tue Feb 12 16:14:20 2002] [error] (2)No such file or directory: master_main: create child process failed. Exiting.
Is there a fix for this? I saw a previous discussion forum post recommending a patch install, but I don't have a MetaLink account and thus can't download the patches. Anyone have a solution to this error other than the patch?

Dougt
Thanks for the update. Sorry that the news was not better. But do not give up.
After I saw your message, I did some Google searching. The following is some of what I found
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/windows-installer-error-1 325-documents-is-not-a/d70411d0-017d-41f0-b5b4-0861b6ca9955
I have some further suggestions which you might consider. If you have professional help, then best let it handle the overall situation, especially if it is going to take you into the Registry where you might not feel comfortable.
My suggestion would be to uninstall Premiere Elements 7, do a run through with ccleaner (regular clearner and registry cleaner parts) and then reinstall Premiere Elements 7. Many have used ccleaner with pros and no cons. In the registry cleaning part, there is a step for you to backup the registry in a file saved to Documents or wherever you want on the computer hard drive.
But, go with what you feel comfortable doing. If you have Premiere Elements 7 projects in the works and can get into Premiere Elements, you may want to Project Archive them for safe keeping.during this time whether you run the ccleaner or not.
We will be watching for your progress.
Thank you.
ATR

Integrate DMS / SAP Content Server 6.40 with EP

Hello ,
With reference to [DMS Installation |DMS Installation; integrate DMS / SAP Content Server 6.40 with EP to access EP PCD .
Regards ,
Santosh

You can integrate the portal with DMS/CMS by using the DMS connector or DMS repository manager. The DMS repository manager can be dowloaded from sap service marketplace
See threads for more information
DMS Integration in EP
Content Server 6.3 integrate with Portal 6.0 possible?
Points are welcome if it is useful
Koti Reddy

Oracle Content Server Security with Web Center Suite

Hi all
I've configured Oracle Content Server (UCM) to integrate with WebCenter Spaces (WCS). The document service works on a user's personal page but fails on group spaces and when I troll the logs I find the following error:
<WCS-07006> <run-time error obtaining content repository oracle.webcenter.doclib.internal.view.DoclibJCRException: repository error
Caused By: javax.jcr.ItemNotFoundException: Unable to get folder info for dCollectionID = 288463355527000401
Caused By: oracle.stellent.ridc.protocol.ServiceException: Unable to display virtual folder information. Cannot read folder.
I am using a socket connection, not web or SSL.
UCM is on an external server and not on the same machine as WCS.
UCM is 11g and WCS 11g patchset 2. Yes I know UCM 11g is not "officially" supported to integrate with WCS until patchset 3, but others have gotten it to work, so I'd like to do the same.
On UCM machine OHS (from web tier utilities) is installed and comfigured.
httpd.conf edited as per requirement.
config.cfg and intradoc.cfg edited as per requirement.
Admin user on UCM has admin and sysmanager rights.
I think this may be because the UCM uses the internal default LDAP first (i.e. it is first on the list of providers) because it does not have an admin user in the external LDAP. So even though in the service connection I specify the UCM admin i think it must also be able to find this user in the external LDAP on the WCS side.
I am currently having trouble figuring out how to give an external LDAP user the same permissions on UCM as that which the default internal LDAP admin user has, so that I can use that external LDAP user in the services connection setup instead.
With WCS under the Fusionware EM is simply added an external LDAP user to the domain for the webcenter section, but for UCM I'm not sure where the appropriate place is to add such a user.
I am also not 100% sure if this is actually the issue.
Any advice will be greatly appreciated!
Thanks!
If it helps:
run-time error obtaining content repository[[
oracle.webcenter.doclib.internal.view.DoclibJCRException: Repository error
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:106)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:62)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.processFilters(WebCenterLocaleWrapperFilter.java:288)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.doFilter(WebCenterLocaleWrapperFilter.java:177)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.jcr.ItemNotFoundException: Unable to get folder info for dCollectionID = 288463355527000403
at oracle.jcr.impl.ExceptionFactory.itemNotFound(ExceptionFactory.java:587)
at oracle.stellent.jcr.IdcPersistenceManager.getResourceByUUID(IdcPersistenceManager.java:433)
at oracle.jcr.impl.TransientLayer.getResourceByUUID(TransientLayer.java:323)
at oracle.jcr.impl.OracleSessionImpl.getNodeByUUID(OracleSessionImpl.java:279)
at oracle.webcenter.doclib.internal.view.JCRRepositoryLogic.getNode(JCRRepositoryLogic.java:178)
at oracle.webcenter.doclib.internal.view.JCRRepositoryLogic.getItem(JCRRepositoryLogic.java:849)
... 90 more
Caused by: oracle.stellent.ridc.protocol.ServiceException: Unable to display virtual folder information. Cannot read folder.
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:116)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:92)
at oracle.stellent.jcr.IdcPersistenceManager.getResourceByUUID(IdcPersistenceManager.java:421)
... 94 more

Hi, Thanks for response.
1. I have created default webcenter project application.
2. Created content repository connection using File System..
3. Created new page using default Template.
4. Drag drop Document List Viewer TaskFlow and setup the content server connection.
5. After running the application , i can see list of documents link in page..
6. But When I click on any link ..browser automaically close..
7.On server console I am getting above mentioned error..
I am using jdev 11.1.1.5 and running on internal weblogic server...
Thanks
Naresh

Calendar Integration with Portal Server 6.0

Hi,
I have installed Calender Server 5.1.1 with portal server6.0..When click the Launch Calendar channel link in my portal page,it takes me to login page for Calendar Server on.I expected it to take me to the calendar page .I donot want to re-authenticate every time i launch a calendar.Any ideas??
Thanks,
Ramnath

Quickest path to success...
stop the cal server
cd to Install Path/cal/bin/config
edit ics.conf
change "service.htttp.ipsecurity" from yes to no
save you changes
restart the server
hope this helps

CFolder to Content Server configuration

Hi
Kindly let me know whether Cfolder can be configured to SAP Content Server. We have installed Cfolder in a seperate system and Content Server in a seperate server.
Regards
Prasanna.B.S

CFolder is an ABAP application, Content Server is a webserver with a library storing data in the database.
How do you want to "integrate" them? Those are two different systems for different purposes.
Markus

Latest version of Content Server

Hi All
I need some assitance in understanding what the latest version of the Content Server is. I know 640 is probably the one, but what confuses me is the content Server Service on SICF on the ERP system for example. Now, does that mean the content server is integrated to the system or do we still need to install a stand alone Content Server. What other way can we implment DMS without the use of the content server, i.e. can the portal knowlege Management achieve the same? if so, what are the prerequisites and pros and cons?
Thanks
Ronny

Response to your second question: Portal Knowledge Management is a stripped down version of DMS. It provides basic content management features with embedded asynchronous and synchronous collaboration(review,rating,feedback,discussion etc).
SAP DMS (with content,cache server setup) typically cater to a long term Document Management strategy involving designs, drawings, technical specifications etc with rich features like Markup and redlining,Document life cycle definition, Distribution strategies, Digital signature, SAP R/3 Object linking,CAD integration etc. The storage options in SAP DMS are:
1. 'DMS Storage' option(may store in SAP DB,Vault,RFC Archive), you can store upto 2 originals/documents and 99 additional files.
2. 'kPro Storage' option(may store in SAP DB,HTTP Content Server), you can store 'n' originals/documents and 'n' additional files
NOTE:
HTTP content server
Either the SAP Content Server or a third-party content server can be used.
SAP database
If you want to store your documents in the SAP database, you need a content table. All your documents are stored in this table in the SAP database. The content table can be cross-client or client-specific.
RFC storage system
RFC is used for storing documents in the context of SAP ArchiveLink, the Archive Development Kit (ADK), or an application that uses SAP ArchiveLink or the ADK.
Logical repositoryThis storage type allows access to different physical repositories, independently of the client and the system ID.
Structure repositoryThe structure repository is only used in the SAP Knowledge Warehouse environment.
The content server is available for free on SAP marketplace for exisiting SAP customers. This needs to be setup on a separate hardware(specifications can be arrived at after contentserver sizing). The storage limit using content server can be scaled upto 50+ terabytes of data.
Regards,
Pradeepkumar Haragoldavar

Content Server not working correctly

Hello,
I am having problems with my Tandberg Content Server. For several years, we have used the Tandberg Content Server (TCS) in combination with our Tandberg Management Server (TMS) to schedule and record video conferences. I schedule 60 video conferences a week to roughly 20 rooms, using the TMS. Of these, about 14 video conferences per week are recorded.
Originally, I only had one recording alias on the TCS set up, and it worked fine. But I recently added a second recording alias, due to the growing number of requests for recordings of the video conferences. It seemed to go okay.
Now, however, the Content Server isn't working quite right. It will record two different video conferences at the same time, but once it's finished encoding them, the link that you get to send to people is messed up: often (but not always) the link merges two seperate video conferences together in one video. Two one-hour video conferences will be merged together in one two-hour recorded conference.
The problem only occurs with video conferences that occur at the same time. Strangely, if I search the Content Server's F drive, under Data/Media, the recordings are all there, and they are seperate. They are only joined together on the Content Server link.
I have made sure that we are indeed recording on seperate recording aliases.
Because the videos in the Data/Media bin are always labled something like O1110292903-0593923929.wmv, I can use guesswork to reconstruct a valid URL to get a working link, but it's a lot of extra work: I want to be able to log in to the Content Server admin interface and be able to send someone a link in a few minutes.
Any ideas on what's going wrong? I created a trouble ticket with Cisco earlier in the week, but have not heard back from Cisco tech support, so I thought I'd open it to the Cisco community.

HI Ron. Good morning. Since our webex the last time, I do believe we can use participant templates in the mean time until we find out whats going on when using TMS this way. When using the recording drop down and all the systems aren't registered to Gatekeeper seems to be the trigger here, but to get you running, this is what I propose we try and do here.
You may have to purge the Content Server out of TMS so TMS doesn't "know" about the IP address of the Content Server.
You will have to examine your routing and preferred MCU in routing here, and make the two changes:
Administrative Tools>Configuration>Conference Settings. All the way at the bottom you will see:
I had to change this to Always and Preferred MCU type in routing to MPS. This is logical since this is the only MCU you have and you need the MCU in each booking (from my understanding of what you said during the webex).
So:
1) Jot down all the conferences that have the Content Server involved, and remove the recording from each conference.
2) Purge the Content Server from TMS.
3) Add participant template with just the IP address of the content server: Booking>Participant Templates and build one like shown below. The number field should be the address of the content server and IP zone should be IP zone for your system.
Go ahead and save the template.
Make booking with this template and another endpoint (don't add the MPS since it should automatically). Check the connection settings and the MPS should be call the IP of the TCS and the other endpoint.
Click Save conference.
If the conference saves ok, build another with a different room and same template again, and click save conference.
The caveat is that when calling the IP of the TCS, the TCS will use what you have configured as the default recording template under Configuration>Site Settings
Just choose which one you want to use all the time if you can.
The way it shows on the TCS is:

Content Server 6.3 integrate with Portal 6.0 possible?

Similar Messages

Maybe you are looking for