Content Server on Virtual Machine with VPN

Hello everybody.
I want to create a test-environment with a Content Server. Regarding to the needed Operating System I decided to use VMware Workstation to virtualize the OS and the Content Server.
Host-OS: Windows XP Professional
Host-IP: 192.17.1.151, Port 1090, not used
Guest: Windows 2000 Server
Guest-IP: 192.168.159.128, Port 1090
Goal: The goal is to log in into the company-network, and connect to the local, virtual Content Server from the central SAP-System.
Network:
With VMware it is possible to use different types of network connections. I decided for NAT. With this it is used to share to host´s IP-Adress.
Furthermore it is possible to create a Port Forwarding so that requests defined ports of the Host are forwarded to the guest/VM. For this I created the following port forwarding in VMware:
1090 = 192.168.159.128:1090
Tests:
Now, I tried if it is possible to reach the port.
1. Command on VM: telnet 192.168.159.128 1090 => Port available
2. Command on Host: telnet 192.168.159.128 1090 => Port not available (That´s okay)
3. Command on Hostt: telnet 192.17.1.151 1090 => Port available
Result:
When I am using CSADMIN to connect to IP 192.17.1.151 port 1090 there is the following error message: "Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED"
Test 2:
I created port forwardings for the following ports: 80, 8000, 8080, 1095, 3200, 3300. Still the same error message.
Test 3:
I tried to use the Content Server directly in the Network without VPN. The Content Server works correctly, but this is not an alternative to the VPN-Connection.
Question:
From VMware-Side everything looks okay. I already discussed this with different specialist from a VMware Forum. But now I need to know, why it is not possible to connect to the Conntent Server. Port is available but it is not possible to connect to the Content Server. Have I forgotten something?

Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
Usually this error shows up when you icm paremeters have not been set, check that icm/server_port_0 is set with value PROT=HTTP,PORT=80
Read,
http://help.sap.com/saphelp_nw04/helpdata/EN/56/2e453cabf4ef6fe10000000a114084/content.htm
Regards
Juan

Similar Messages

DPM 2012 R2 cannot browse the contents of the virtual machine, Error 958, Details: Internal error code 0x80990F4E

Hi,
We have a Microsoft System Center 2012 R2 Data Protection Manager Version 4.2.1235.0 as a Guest system on a Hyper-V node. The Hyper-V role is on a Windows Server 2012 R2
I receive this error message:
DPM cannot browse the contents of the virtual machine on the protected computer [computername]. Item level recovery is not supported in the following scenarios.
1. The VHD contains a dynamic disk inside the guest OS.2. The VHD has no volume.
3. HyperV role is not installed on DPM server.
4. Automatic mounting of volumes is disabled on the DPM server.
1) Try enabling automatic mounting of volumes using mountvol on the DPM server to perform item level recovery
2) Otherwise perform a full restore of the virtual machine.
ID: 958
Details: Internal error code: 0x80990F4E
One of our protected Hyper-V guest systems backup suddenly refuses to browse the content of the VHD file. The system has 2 VHDs. One for the operating system and one for the data. The OS VHD has no problem with content browsing only the data VHDX started
this error after the installation of september update. I already checked the status that was suggested (1. the vhd contains a dynamic disk... etc. ) and everything is well configured. I have no free space to make a full recovery cause it's 6TB of data.
The updates that were installed are:
DPM Server
KB2977629
KB2966828
KB2988948
KB2993651
KB890830
KB2977765
KB2894856
Protected Guest system
KB2972213
KB2977629
KB2894852
KB2973114
KB2993651
KB2988948
KB890830
KB2977765
KB2894856
Any advice? Thank you in advance for any help.
Andras

Hi,
Does the protected VM have Windows dedup enabled on the volume that cannot be mounted ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

How can I know the version of Application Server Java Virtual Machine

How can I know the version of Application Server Java Virtual Machine?
Thanks a lot.

Thats easy. Your jdk/jre are located in the App Server home directory. Just run the java command under the jdk directory with the "-version" switch and it will provide you with detailed information about your VM.
For example if you're doing it at command prompt it will be something like
java -versionI hope this will be useful to you.
Regards,
Wasif

Cannot create guest virtual machine with Solaris 10 SPARC in Oracle VM 2.2

Dear All,
I try many times to create guest virtual machine with Solaris 10 SPARC but not get success.
When I created it already and then I start the Power On button, it run normally but the Console button cannot click on (hide). After that the virtual machine running abit then it change status to Powered Off.
Please kindly give advice for this.
Thanks and regards,
Heng

I storgly doubt, VMware player is available for Solaris 10 SPARC version.
Solaris 10 is not a comercial product, like ubuntu, windows, MAC etc... It's really for a server.
That's the reason still I hate Solaris 11 as a desktop. You have very limited product/software.... This may change for Solaris 11, but U can't expect one for Solaris 10.

Live Migration Failed while Quick Migration is Ok...Virtual machine with synthetic FC HBA !

When I migration the virtual machine with synthetic FC HBA in windows server 2012 R2 Cluster,it fails
but I do it in the style of quick migraton ,it secceed!
The error event here
Live migration of 'Virtual Machine PTSCSQL01' failed.
Virtual machine migration operation for 'PTSCSQL01' failed at migration destination 'PTCLS0106'. (Virtual machine ID B8FBDE64-FF97-4E9B-BC40-6DCFA09B31BE)
'PTSCSQL01' Synthetic FibreChannel Port: Failed to finish reserving resources with Error 'Unspecified error' (0x80004005). (Virtual machine ID B8FBDE64-FF97-4E9B-BC40-6DCFA09B31BE)
'PTSCSQL01' Synthetic FibreChannel Port: Failed to finish reserving resources with Error 'Unspecified error' (0x80004005). (Virtual machine ID B8FBDE64-FF97-4E9B-BC40-6DCFA09B31BE)
My virtual machine's synthetic FC HBA setting here
做微软的先行者，享受用户体验

Yes, definitely check your zoning/masking. Remember that with vHBA you have twice as many WWPNs to account for. Performing a live migration makes use of both pairs during the transfer from one host to the other - one set is active on the machine
currently running and the second set is used to ensure connectivity on the destination. So if you are using Address Set A on Host1, Host2 will try to set up the fibre channel connection using Address Set B. If you do a quick migration, you would
continue to use the same Address Set on the second host. That's why you most likely need to check your zoning/masking for the alternate set.
. : | : . : | : . tim

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Here is the short answer:
Installing Snow Leopard Server into Parallels 10 for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.

Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish

Not able to connect Azure Linux Virtual Machine with Putty

Hi,
I am not bale to connect Azure Linux Virtual Machine with Putty... Error shows "Network error: connection timed out".
Please help.
Thanks,
Techsol
Thanks, Kk

Hi TechSol01,
Thanks for posting here.
I suggest you to try the below steps
On a computer running a Windows operating system, you might want to use an SSH client such as PuTTY. For more information, see the
PuTTY Download Page.
On a computer running a Linux operating system, you might want to use an SSH client such as OpenSSH. For more information, see
OpenSSH.
If it is the endpoint configuration, you can go to the portal and add port 22, (it should already be there by default).
Now if it is locked out of the VM because of the firewall on the VM, which is called iptables , You won't be able to connect to the VM,
If you haven’t configured the port 22. You may have to follow the below steps :
A = Original VM (Inaccessible VM)
B = New VM (New Temp VM)
1) Stop VM A via the Azure management portal
2) Delete VM A BUT select “keep the attached disks”
3) Once the lease is cleared, attach the Data Disk from A to VM B via the Azure Portal, Virtual Machines, Select “B”, Attach Disk
4) On VM “B” eventually the disk will attach and you can then mount it.
5) Locate the drive name to mount, on VM “B” look in relevant log file note each linux is slightly different.
grep SCSI /var/log/kern.log (ubuntu)
grep SCSI /var/log/messages (centos, suse, oracle)
6) Mount the attached disk onto mountpoint /tempmount
df -h
mkdir /tempmount
mount /dev/sdc1 /tempmount
df –h
7) Now you should be able to clear the rules set from the configuration file of the firewall, by accessing it
through /tempmount
Let me know if this works
Girish Prajwal

Restarting a failed admin server on another machine with different IP

Hi,
I'm trying to restart a failed admin server on another machine with different IP on Weblogic Server 10gR3. After copying the domain config to another server, the admin server can be started without any problem, but it cannot contact the managed server until the managed server is rebooted.
The behavior contradicts the documentation, http://download.oracle.com/docs/cd/E12840_01/wls/docs103/server_start/failures.html#wp1064112, that says Running MSs will learn the new AS address when they are contacted by the AS after it has been started. It does not mention the managed servers need to be rebooted.
did I do anything wrong? Your help would be much appreciated.
Thanks a lot,
Andreas

Hi,
What ever you said is true. If the IP Address of Admin Server is changed, then Managed Server must connect to Admin Server after "ReconnectIntervalSecs" . If the IP address is not moved then Admin Server Should contact Managed Server automatically.
Can you provide details steps you had performed, so that we can identify the root cause of the issue.
Thanks.
Vijay Bheemineni.

Can i install VS 2013 in my Virtual Machine with Windows 8.1 and work for Mobile Development,Mobile Emulator can work in my Virtual Machine ?

I have a Virtual Machine with Windows 8.1 OS and 4gb RAM, 200gb Disk.
I want to develop apps for Windows Mobile 8.1 with VS 2013 Update 4, Mobile Emulators can work in my Virtual Machine, bcz i am getting bellow error.
Windows Phone Emulator is unable to verify that the virtual machine is running:
Something happend while starting a virtual machine:'Emulator 8.1 WVGA 4 inch 512MB.APPUSER' failed to start.(Virtual machine ID xxxxxx-xxxxx-xxxx-xxxx-xxxxxxx)
The Virtual Machine Management Service failed to start the virtual machine 'Emulator 8.1 WVGA 4inch 512MB.appuser' because one of the Hyper-V components is not running (Virtual machine ID xxxx-xxxxx-xxxx-xxxx-xxxx).

No you cannot do that. You need a physical machine that supports Hyper-V
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support)

Pre-Configured Virtual Machine with OBIEE 11g available?

Hi,
does Oracle offer a pre-configured Virtual Machine with OBIEE 11g? I found an old Virtual Box Image with 10.2..., but nothin newer.
Thanks for your help.
Christoph

Hi,
I don't suppose this is available yet is it? I notice Oracle offer quite a few downloadable images for Virtual Box now, but OBI isn't included in any that I could see.
Thanks,
Mike

Using virtual machines with Mac

Hi Folks,
Any suggestions on using a virtual machine with Mac. Parallels, VMware Fusion or Virtual Box ? Which one is good and share some thoughts here.
Thanks,

Hi direwolf8,
You wrote : Not without knowing what you're trying to achieve.
This is what I am trying : I am planning to use the virtual machine technique so that I can work from home with the animation softwares to create and convert movies and the most commonly used systems, use Windows OS. I will need to test whether they will run in the Windows environment using all media players before making DVDs. (As per policies that is what I am supposed to reveal).
You wrote : If you're running Linux or Windows, you can use native drivers for your video display and skip the virtualized abstraction layer. You can even add a high-performance video card just for the vm's.
How can I do that?
Hi dwd, Thank you for your response also.
Regards.
Message was edited by: Mac-Expert

Create Hyper-V Virtual Machines with Windows PowerShell searching on hostname

Dear,
I’m a starter with PowerShell scripting an I’m looking for a script to create Hyper-V Virtual Machines with Windows PowerShell. The idea behind the script is that when I run the script its first searching for the hostname. I’m migrating 24 locations and each
location have a different hostname like xxx-SRV001. The script needs to use the first 3 signs from the hostname in this case “xxx” and create 2 VM's with below info:
Virtual Machine 1 2048MB
Virtual Machine 2 4096MB
Location D:\VM\
I can create VM's with Powershell into Hyper-V so only a script to first searching for the first 3 characters of the hostname is enough.
Example:
It's the intention that when the script runs it's looking for the hostname. As example we have hostname 000-SRV001
If the script see the first 3 characters of the hostname, in this case 000 he need to create 2 VMs with name xxx-SRV002 and xxx-SRV004
I think it must be something with
$hostname = "Get-WmiObject -computername $Machine Win32_Computersystem"
But then when i'm asking for $hostname he must give me back the hostname and if the hostname is 1 of the 24 locations then he need to create 2 vm's in Hyper-V with above info.
Can you help me or do you have a script for this?

Juste use :
$vram = 1GB*$vRam
You not need the "
Do you have any error with the creation of the VM?
# Variables
$VMName = Import-Csv "C:\HyperV\input.csv"
$VHD = 40GB
$VMLOC = "C:\HyperV"
$vSwitch = "External"
$ISO = "C:\ISO\WinServer2012R2.iso"
$LocationCode = $env:COMPUTERNAME.Split("-")[0]
# Create VM Folder
MD $VMLOC -ErrorAction SilentlyContinue
Foreach ($VM in $VMNames)
$Name = $VM.name
[int64]$vRam = $vm.vram
$vram = 1GB*$vRam
$VMName = $LocationCode+$Name
# Create Virtual Machine
New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VMLOC\$VMName\Virtual Harddisks\$VMName.vhdx" -NewVHDSizeBytes $VHD -SwitchName $vSwitch
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
Error message
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand

List all Virtual Machines with Associated Tags

I have custom attributes for application engineer, OS engineer, application name, etc. In the vSphere Client I can list all VMs and their custom attributes. I can then sort the list by custom attribute. Doing this allows me to find virtual machines with empty custom attributes.
I have converted my custom attributes to tags. I cannot find a way to list all virtual machines with associated tags in the vSphere Web Client. Is there a way to do this using PowerCLI? I'd like to be able to produce a CSV file that contains all virtual machines and their associated tags.

If you have tag assignments for the category of "OS engineer". You can write this:
Get-TagAssignment -Category "OS engineer"
That will list the tags in the category and the associated VMs.

Hyper-V host fails with "RPC Server unavailable" error when I try to promote Windows Server in virtual machine to a domain controller

Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
VM: Windows Server 2012 R2 with installed Active Directory Domain Services
When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.

Hello Aleksandr,
There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
a multihomed domain controller.
Active Directory communication fails on multihomed domain controllers
http://support.microsoft.com/kb/272294/
Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
configure a DC with registry mods:
http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
7 Reasons not to Make Hyper-V a Domain Controller
http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
Domain Controller as Hyper-V host
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
Networking?
I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
the host OS ping/communicate with the DC virtual machine?
If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
Hyper-V Server VLAN Network Configuration
https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv
Recommendation:
Why not just create another VM DC?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Content Server on Virtual Machine with VPN

Similar Messages

Maybe you are looking for