Content Server 640 installation on Windows

Hi
I have installed Content server 640 on windows 2003. IIS is also running.
When i try the following URL, i don't see the content server running:
http://<HOST>:1090/ContentServer/ContentServer.dll?serverInfo
I get the message "The page cannot be displayed"
Can some body help me please...
Thanks
Pavan

Hi Pavan,
Make sure permissions are set as below note (even though is says 6.30 it applies to 6.40) regarding "NETWORK_SERVICE" user.
Note 658442 - SAP Content Server 6.30 on Windows 2003 servers
Also, read
Note 851146 - ODBC driver cannot be loaded on Windows 2003
That most likely will fix the problem
Regards
Juan

Similar Messages

SAP Content Server and Maxdb on Windows x64

Hello,
We currently run MaxDB 7.6 and Content Server 6.40 on Windows 2003 32 bit. We'd like to upgrade this to 64bit, preferably Windows 2008 R2. However, we would use 2003 x64 if necessary.
Does anyone know if this is possible and where we'd find the software and installation instructions? The information in the Service Marketplace / PAM seems a bit vague in this area (unless we're looking in the wrong place).
Any help would be much appreciated.
Thanks,
Philip.

Hi,
I have the below info - hope it helps. I think i got it from this forum.
The media required:
50092483_3 NW 7.0 Presentation - MaxDB Release 7.6.03
50092483_2 NW 7.0 Presentation - SAP Content Server 6.40
51033511_13 NW 7.0/BS2005 SR3 Inst. Master Windows Server on x64 64bit
You can find it on service.sap.com under NetWeaver 7 (and not Content Server...).
service.sap.com/swdc -> Installation and Upgrades -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 7.0 -> Windows Server
Regards,
Neil

Content Server 10gR3 installation problem on Windows 7

Hi,
I just started working on UCM. I tried to install Content Server 10gR3 on my machine with Windows 7 OS. When I try to install, the installation suddenly aborts or hangs until I abort it. Web server (Apache) and DB (Oracle 10g) are running fine.
System has got adequate configuration: Enough Disk space, 2GB RAM and 2 GHz CPU
The same installer worked perfectly on Windows XP Pro 2002 SP2. Can some one reply if UCM 10g is support on Windows 7 ? This, however, is only for learning purpose on my home PC and not for production use.
I also tried running the installer in Windows XP compatible mode. But this didn't help me either. Do, I need to install Win XP to run it or is there any alternative to make it run on Windows 7.
Thank you
Rama

Hi Srinath,
Thanks for your prompt reply. Could you also please let me know if there is any advanced version of UCM (like 11g) that works on Windows 7 - before I go for a windows XP installation.
Thanks again
Rama

Installation content server 640 error: Server inetrnal error 500

Hi guru,
SE38 -> RSCMST
HTTP/1.1 500 (Internal Server Error)
Connection: close
Date: Mon, 09 Feb 2009 18:49:13 GMT
Server: Microsoft-IIS/6.0
X-Powered-By: ASP.NET
Content-Type: text/plain
Content-Length: 70
X-ErrorDescription: "ContRep C1 or Storage entry not defined"
X-ContentServer: contentServer="10.58.19.54";contentServerPort="1090";pVersion="0046";id="SAP HTTP Content Server";
       201
This problem is the same of platform 4.6X. (note 313721 ) but
My platform is SAPBK620640.
Conten Server.ini is
; List of all ContentServer.dll & CSProxyCache.dll Options
; $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ind/contentServer/6.40/windows/ContentServer.ini#1 $
; Options for [contRep-*] section
; Name                    default
; ===================================
; Storage               ""
; ContRepDescription          ""
; ContentStorageHost          ""
; ContentStorageName          ""
; Security               0 (ContentServer section value)
; DefaultDocProt          ""
; sqltrace
; driver                        LiveCache
; Options for [ContentServer] section
; Name                    default
; ===================================
; Security               0
; AdminSecurity               0
; DefaultDocProt          ""
; LogRequests               0
; ResponseTrace               0
; Log404Response          0
; FullTrace               0
; KeepConnection          0
[ContentServer]
[contRep-C1]
Security=0
DefaultDocProt=
ContRepDescription=content repository per data archiving
SAPDBUser=sapr3
SAPDBPassword=88F9C74CFACA
ContentStorageName=SDB"
Please help me.
Thank You

Hi,
Following web link might help you.
http://www.c-sharpcorner.com/UploadFile/mahesh/500ISE02082007143311PM/500ISE.aspx
Manoj Chintawar

SQL Server 2008 Installation on Windows 7

I tried to install SQL Server 2008 on a Windows 7 Home Premium 64 bit (Enterprise Edition Trial Edition). The system check was ok and the installation started successfully but at the end there were some errors. In the logfile there were stacktraces describing failures trying write operations on the registry. What can I do to install SQL Server 2008 on my operating system?

Hello ChunSong Feng,
thanks for your advice. Herewith I send you the text parts from detail.txt with the detailed error description. The whole file is too big to send as content.
Thanks in advance:
2009-11-17 21:05:10 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;CI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1028)
2009-11-17 21:05:10 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:05:10 Slp: ----------------------------------------
2009-11-17 21:05:10 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:05:10 Slp: Inner exceptions are being indented
2009-11-17 21:05:10 Slp:
2009-11-17 21:05:10 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:05:10 Slp:     Message:
2009-11-17 21:05:10 Slp:         Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:10 Slp:     Data:
2009-11-17 21:05:10 Slp:       WatsonData = Microsoft SQL Server
2009-11-17 21:05:10 Slp:       DisableRetry = true
2009-11-17 21:05:10 Slp:     Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:05:10 Slp:         Message:
2009-11-17 21:05:10 Slp:                 Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:10 Slp:         Stack:
2009-11-17 21:05:10 Slp:                 bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:05:10 Slp:                 bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:05:10 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:05:10 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:05:10 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:10 Slp: ----------------------------------------
2009-11-17 21:05:28 Slp: User has chosen to cancel this action
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2009-11-17 21:05:44 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:45 Slp: Watson bucket for exception based failure has been created
2009-11-17 21:05:45 SQLBrowser: SQL Server Browser Install for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' failed with cancel exception: Microsoft.SqlServer.Configuration.Sco.ScoException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen. ---> System.UnauthorizedAccessException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
   bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
   bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
   bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
   bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
   bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
   bei Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
   bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.SetSecurityDescriptorByLocation(String sRegLocation, RegistryView regView, String sSddl, Boolean bOptional)
   bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ApplyRegPermissions(XmlNodeList xmlNodeListRegPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
   bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyRegCommonPermissions(XmlElement xmlRootPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
   bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyPermissions(String sXmlPermissionsFile, String sBrowserPrincipal)
   bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ConfigStaticProperties(SqlBrowserPublicConfig publicConfigSqlBrowser)
   bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ExecConfigNonRC(SqlBrowserPublicConfig publicConfigSqlBrowser)
   bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.SelectAndExecTiming(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
   bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ExecWithRetry(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig).
2009-11-17 21:05:45 SQLBrowser: The last attempted operation: Der '(A;CI;KR;;;[SQLServer2005SQLBrowserUser$UTAS-URMEL])'-Zugriffssteuerungseintrag wird dem Registrierungsschlüssel 'SOFTWARE\Microsoft\Microsoft SQL Server' in der 'Wow6432'-Sicht hinzugefügt, um den SQL Server Browser-Dienst zu konfigurieren..
2009-11-17 21:05:45 Slp: Fehler bei der Konfigurationsaktion für Feature SQL_Browser_Redist während der Zeitangabe ConfigNonRC und Szenario ConfigNonRC.
2009-11-17 21:05:45 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:45 Slp: Fehler bei der Konfigurationsaktion für Feature SQL_Browser_Redist während der Zeitangabe ConfigNonRC und Szenario ConfigNonRC.
2009-11-17 21:05:45 Slp: Microsoft.SqlServer.Configuration.Sco.ScoException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen. ---> System.UnauthorizedAccessException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:45 Slp:    bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:05:45 Slp:    bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:45 Slp:    --- Ende der internen Ausnahmestapelüberwachung ---
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.SetSecurityDescriptorByLocation(String sRegLocation, RegistryView regView, String sSddl, Boolean bOptional)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ApplyRegPermissions(XmlNodeList xmlNodeListRegPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyRegCommonPermissions(XmlElement xmlRootPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyPermissions(String sXmlPermissionsFile, String sBrowserPrincipal)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ConfigStaticProperties(SqlBrowserPublicConfig publicConfigSqlBrowser)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ExecConfigNonRC(SqlBrowserPublicConfig publicConfigSqlBrowser)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.SelectAndExecTiming(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ExecWithRetry(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.Install(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
2009-11-17 21:05:45 Slp: Ausnahme: Microsoft.SqlServer.Configuration.Sco.ScoException.
2009-11-17 21:05:45 Slp: Quelle: Microsoft.SqlServer.Configuration.Sco.
2009-11-17 21:05:45 Slp: Meldung: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen..
2009-11-17 21:05:45 Slp: Innere Ausnahme:
2009-11-17 21:05:45 Slp: Ausnahme: System.UnauthorizedAccessException.
2009-11-17 21:05:45 Slp: Quelle: mscorlib.
2009-11-17 21:05:45 Slp: Meldung: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen..
2009-11-17 21:05:45 Slp: Completed Action: SqlBro
2009-11-17 21:05:50 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:05:50 Slp: ----------------------------------------
2009-11-17 21:05:50 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:05:50 Slp: Inner exceptions are being indented
2009-11-17 21:05:50 Slp:
2009-11-17 21:05:50 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:05:50 Slp:     Message:
2009-11-17 21:05:50 Slp:         Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:50 Slp:     Data:
2009-11-17 21:05:50 Slp:       WatsonData = 100
2009-11-17 21:05:50 Slp:       DisableRetry = true
2009-11-17 21:05:50 Slp:     Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:05:50 Slp:         Message:
2009-11-17 21:05:50 Slp:                 Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:50 Slp:         Stack:
2009-11-17 21:05:50 Slp:                 bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:05:50 Slp:                 bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:05:50 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:05:50 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:05:50 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:50 Slp: ----------------------------------------
2009-11-17 21:05:57 Slp: User has chosen to cancel this action
2009-11-17 21:05:58 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2009-11-17 21:06:17 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:17 Slp: Watson bucket for exception based failure has been created
2009-11-17 21:06:17 SSIS: Failed to set registry permission on key 'SOFTWARE\Microsoft\Microsoft SQL Server\100' to SID 'S-1-5-21-2556463381-1186548668-390171815-1029'. Error: 'Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.'
2009-11-17 21:06:17 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1029)
2009-11-17 21:06:17 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:06:17 Slp: ----------------------------------------
2009-11-17 21:06:17 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:06:17 Slp: Inner exceptions are being indented
2009-11-17 21:06:17 Slp:
2009-11-17 21:06:17 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:06:17 Slp:     Message:
2009-11-17 21:06:17 Slp:         Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:17 Slp:     Data:
2009-11-17 21:06:17 Slp:       WatsonData = SSIS
2009-11-17 21:06:17 Slp:       DisableRetry = true
2009-11-17 21:06:17 Slp:     Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:06:17 Slp:         Message:
2009-11-17 21:06:17 Slp:                 Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:17 Slp:         Stack:
2009-11-17 21:06:17 Slp:                 bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:06:17 Slp:                 bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:06:17 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:06:17 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:06:17 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:06:17 Slp: ----------------------------------------
2009-11-17 21:06:24 Slp: User has chosen to cancel this action
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2009-11-17 21:06:47 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:47 Slp: Watson bucket for exception based failure has been created
2009-11-17 21:06:47 SSIS: Failed to set registry permission on key 'SOFTWARE\Microsoft\Microsoft SQL Server\100\SSIS' to SID 'S-1-5-21-2556463381-1186548668-390171815-1029'. Error: 'Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.'
2009-11-17 21:06:47 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib
2009-11-17 21:06:47 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1029)(A;CI;KR;;;LU)(A;CI;KR;;;MU)
2009-11-17 21:06:47 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:06:47 Slp: ----------------------------------------
2009-11-17 21:06:47 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:06:47 Slp: Inner exceptions are being indented
2009-11-17 21:06:47 Slp:
2009-11-17 21:06:47 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:06:47 Slp:     Message:
2009-11-17 21:06:47 Slp:         Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:47 Slp:     Data:
2009-11-17 21:06:47 Slp:       WatsonData = Perflib
2009-11-17 21:06:47 Slp:       DisableRetry = true
2009-11-17 21:06:47 Slp:     Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:06:47 Slp:         Message:
2009-11-17 21:06:47 Slp:                 Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:47 Slp:         Stack:
2009-11-17 21:06:47 Slp:                 bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:06:47 Slp:                 bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:06:47 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:06:47 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:06:47 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:06:47 Slp: ----------------------------------------
2009-11-17 21:06:52 Slp: User has chosen to cancel this action

SAP Content Server 6.40 on Windows 2003, IIS 6, filesystem storage

Hello:
We have installed SAP Content Sever 6.40 on Windows Server 2003, IIS 6, and using the filesystem as storage, not SAPDB.
The installation goes without any issues and completes successfully, but the test URL http://<host>:<port>/ContentServer/ContentServer.dll?serverInfo returns "The page cannot be displayed" and not the expected system info/status. We need to fix this before moving on to config in ERP, any suggestions into Content Server or IIS settings/configuration is appreciated.
We're using the standard install port 1090, and testing from a browser in the same host.
Regards,
Eduardo

Additional information:
Looking in the event viewer under application, I see the following 2 errors:
1) The HTTP Filter DLL D:\Program Files\SAP\Content Server\ContentServer.dll failed to load. The data is the error.
Data: 0000: 0000007f
2) Could not load all ISAPI filters for site/service. Therefore startup aborted.
Regards,
Eduardo

Content Server Post Installation

While doing Post Installation of Content Server , Userid& password are asked in csadmin tcode, but "superdba" & "control" are not getting accepted. What is the user id& password to be given in "CSAdmin" tcode.Please convey the procedure for creation of Content Repository & Content Server Configuration and usage.

Hi,
the transaction is asking for an user/password combination for the KW website within the Internet Information Server. It was not asked for the MaxDB users.
First try http://<contentservername>:<1090>/ContentServer/ContentServer.dll?serverInfo as URL. You also will be asked for an username/password. Try a username that exists on the Windows server where the content server is running on, e.g. local administator
Hope that helps.
Frank

Content Server - Disassociated installation

Hi,
I have done the following installations.
Linux machine1 - Content Server 10gR3
Linux machine2 - Oracle AS 10gR3 with Apache server (using this as web server)
Linux machine3 - Oracle DB 10gr2
In "install_cserver_unix_10en.pdf", under Section F2.2 - Configuring web server system, it states I have to copy "[Instance_Dir]\idcplg", but I don't see this folder in my Content Server installation.
Without completing this particular step, when I try to login to the server, I get the error "The Server is unavailable. Unable to connect to address.".
Is the error related to that particular step or did I miss any other setup?
BTW i followed the instructions provided in install_cserver_unix_10en.pdf for my installation.
Can anyone please point me to a solution?
Thanks
Raji

Check that you are running IdcAdmin and IdcServer on the Linux Machine1.
It appears that idcplg is not needed on solaris installations with sun's webserver.
Message was edited by:
user648097

Content Server 6.40 on Windows 2003 64bit

Hello everyone,
I'm trying to find any kind of information on Content Server 6.40 on a 64 bit windows machine.
The latest doc I can find is about 6.30 on a windows 2000 machine.
The reason why i'm looking for this doc is because i have a lot of questions.
I installed CS 6.40 on the windows 2003 64bit machine with MaxDB 7.6.01.08. (Deliverd with 2004S SR2). During the install sapinst ask for the packages to install. When asking for Maxdb i give the path for "Maxdb_Windows_i86_64". After the install I see he installed the package "Maxdb_Windows_I386".
Why does he not install the 64bit version? Is it hard code to take the 32bit? so why giving the possibility to install the 64 bit for Maxdb?
after the install i downloaded the CD maxdb 7.6.03 (50092483_3) from sap and tried to install it with the new cd. Install is not working.
Even an upgrade of Maxdb from 32 bit to 32 bit and from 32 bit to 64 bit is not working.
I even tried to download the updates from mysql website which redirect to sdn.
I can't be the only one with this kind of problem.
hope there is some who can help me
thanks in advance.

logfile:
INSTALLER_INFO: Version = 7.6.06 Build 003-123-202-135
INSTALLER_INFO: Changelist = 202135
INSTALLER_INFO: MakeId = 357533
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = BRASAPCS001
SYS_INFO: System = Windows
SYS_INFO: Architecture = AMD64
SYS_INFO: Version = NT 5.0
SYS_INFO: Subversion =
MSG: collector found 12 archives
WRN: software in package "DB Analyzer" (SDBANA.TGZ) isn't runnable on your system
magic string: MS Windows 32-bit i386 executable
YOUR SYSTEM: architecture = AMD64
YOUR SYSTEM: subversion =
YOUR SYSTEM: system = Windows
YOUR SYSTEM: version = NT 5.0
WRN: software in package "Base" (SDBBAS.TGZ) isn't runnable on your system
magic string: MS Windows 32-bit i386 executable
YOUR SYSTEM: architecture = AMD64
YOUR SYSTEM: subversion =
YOUR SYSTEM: system = Windows
YOUR SYSTEM: version = NT 5.0
WRN: software in package "Database Connectivity" (SDBC.TGZ) isn't runnable on your system
magic string: MS Windows 32-bit i386 executable dll
YOUR SYSTEM: architecture = AMD64
YOUR SYSTEM: subversion =
YOUR SYSTEM: system = Windows
YOUR SYSTEM: version = NT 5.0
WRN: software in package "Database Kernel" (SDBKRN.TGZ) isn't runnable on your system
magic string: MS Windows 32-bit i386 executable
YOUR SYSTEM: architecture = AMD64
YOUR SYSTEM: subversion =
YOUR SYSTEM: system = Windows
YOUR SYSTEM: version = NT 5.0
WRN: software in package "Loader" (SDBLD.TGZ) isn't runnable on your system
magic string: MS Windows 32-bit i386 executable
YOUR SYSTEM: architecture = AMD64
YOUR SYSTEM: subversion =

Access Content Server Pos-installation Configuration

Hello,
I am new with Oracle ECM, I am starting to use it for Webcenter requirements.
I have installed succesfully Oracle Content Server. I accessed http://localhost:16200/cs, and it showed me the post-installation configurations.
I made some changes and restarted the server. I then realized I had made some mistakes. How can I access the configuration screen again, and make some changes? Thank you.
Joao

Hi
That config screen does not show up a second time .
If you want to make modifications to the configurations then make them in<domain_home>/ucm/cs/config/config.cfg
After the changes are done UCM restart should be done .
Thanks
Srinath

Content Server Linux Installation Issue

Hi,
After installing Linux Contentserver and accessing same I am getting following error I am using Apache weserver as part of Oracle application server 10.1.2.0.2.
http://myhost:4444/idc/ ContentServer
http://myhost:4440/idc/ Admin Server
Network message format error. Unable to parse browser environment or content item. Unable to parse properties. Name-value pairs are missing an '='.
Need help to resolve this.
Regards,
Jigar

Hi,
i've setup 10.3.1.0 version of Webserver and also Universal Content Management server's content server.
When i try to load the main page with http://myhostname/idc/, it fails to load but when i login to webserver main page using http://myhostname:7777/, it can load.
Can anyone help me on this?
config.config
<?cfg jcharset="UTF8"?>
#Content Server System Properties
IDC_Name=idc
IdcProductName=idccs
SystemLocale=English-US
InstanceMenuLabel=idc
InstanceDescription=Content Server idc
SocketHostAddressSecurityFilter=192.168.0.20
#Database Variables
JdbcDriver=oracle.jdbc.OracleDriver
JdbcConnectionString=jdbc:oracle:thin:@dell:1521:REPOS
JdbcUser=content
JdbcPassword=OI6UvSF4SfabkpF0YGqKmFvjUz/ZK8elZWd2ZXzfQPY=
JdbcPasswordEncoding=Intradoc
DatabasePreserveCase=1
#Internet Variables
HttpServerAddress=AS1
MailServer=mail
SysAdminAddress=sysadmin@mail
SmtpPort=25
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=No
WebProxyAdminServer=true
#General Option Variables
EnterpriseSearchAsDefault=0
IsJspServerEnabled=0
JspEnabledGroups=
#Additional Variables
DatabaseType=oracle
SearchIndexerEngineName=DATABASE.METADATA
WebServer=apache
IdcAdminServerPort=4440
IntradocServerPort=4444
httpd.conf
include "/oracle/product/10.1.3.1/Oracle_Web/Apache/Apache/conf/oracle_apache.conf"
LoadModule IdcApacheAuth "/oracle/ucm/server/shared/os/linux/lib/IdcApacheAuth.so"
IdcUserDB idc "/oracle/ucm/server/data/users/userdb.txt"
Alias /idc "/oracle/ucm/server/weblayout"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc
</Location>

Client Server product installation over Windows Terminal Server

Hi,
Have anyone tried installing oracle based client/server applications over WTS? I have a specific requirement wherein my WAN is connected on low speed lines. I've tried this installation but the performance seems to degrade very badly. Can you suggest me a solution to this issue. Further I'm facing problems when trying to print on Local printers. Any ideas???
Thank in advance
vinod

Please see http://otn.oracle.com/products/forms/htdocs/formsservicesfaq.html
It's stated here that this kind of installation is not supported. You would need to post a question on the Forms Forum for more details.
Regards,
Danny

DMS Content Server installation error

Dear all:
We're now installing our SAP Content Server 640 for our DMS solution. The environment is Windows 2003 x64 Enterprise Edition SP2, SAP Content Server 640, and MaxDB 7.6. In the installtion initial screen, we choose the option to install the content server, the system reports an error even before it starts the installtaion process. The error message is
"FCO-00011 The step changeUserInstall with step key |SAP_CONTENT_SERVER|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0|changeUserInstall was executed with status ERROR " in step "initial password manager".
Please help.

hi
download patch for "SAPInst.exe" from Note 929929
May be it will help you.
regards,
nitin
award point if useful

Content server (installation error)

hi,
I have installed content server (oracle+UCM). on Windows 2000+SP4 platform.
But the problem I am facing is.. when I try to start content server system goes idle.
Its not giving me Login screen. But all other applications are working fine.
Can any one tell me what the problem could be?
Thanks in advance.

Hello Everybody
I had the same problem with an installation of content Server 6.4 on AIX 5.3.
I checked the file in modules using "file" command and the result is :
"for apache" mod_access.so: executable (RISC System/6000) or object module not stripped
"for Content Server" mod_sapcs2.o: 64-bit XCOFF executable or object module not stripped
I think that the apache was not compiled in 64 bits.
Also, i want to compiled Apache file in 64 Bit but i did not find the procedure or command.
Could you give me more informations to solve it
Many thanks in advance
Elodie

SAP Content Server Configuration (CSADMIN) error in connection

Dear Colleagues
I have installed SAP Content Server 6.40 on Windows 2008 R2 server (64 bit) using IIS 7.5 with MaxDB 7.8.02, Installation completed successfully.
URL testing Information on both Content Server and an Instance which we need to connect to it.
http://cs460:1090/ContentServer/ContentServer.dll?serverInfo
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001 ";serverVersion="6400";serverPatch="9";serverBuild="201";pVersion="0046";serverStatus=
"running";serverStatusDescription="";serverDate="2014-05-11";serverTime="02:03:08";startUpDate="2014-05-11";startUpTime="02:03:08";lastAccessDate="2014-05-11";lastAccessTime="02:03:08";
However, when I try to create repository with CSADMIN tcode, I am getting error ''HTTP error: 500 (Internal Server Error)'.
database host is up or down and the web server up
My settings are as follows
1- On Content server I give full permission to content Rep directory
2- On IIS I have allowed Unspecified ISAPI& CGI & modules.
3-odbcreg as the following:-
C:\sapdb\SDB\db\pgm>odbcreg -g
List of installed drivers
1.      SQL Server;     %WINDIR%\system32\SQLSRV32.dll
2.      SAP MaxDB SDB (Unicode);        C:\sapdb\SDB\db\pgm\sdbodbcw.dll
3.      SAP MaxDB SDB; C:\sapdb\SDB\db\pgm\sdbodbc.dll
      C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbcw.dll
ODBC Driver for 'MaxDB' has been successfully registered.
     C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbc.dll
ODBC Driver for 'MaxDB' has been successfully registered.
4- under settings tab for the repository I set the parameter (driver = MaxDB) as per SAP note 977091
Please suggest, how to resolve this issue.
Thanks

HI Hany Zahran,
Hope that your issue resolved? if so please close this thread with updated answer and make sure mark assumed answered (see top of the screen).
All the best my dear fnd.
Regards,
chandu.

Content Server 640 installation on Windows

Similar Messages

Maybe you are looking for