Contract Pricing Discount Not Applied to Service Order

Hi Guru's
We have recently applied Enhancement Pack 3 to our system and now have an issue where the service contract discount is not applying to new service order items. The service contract is being determined correctly, but the pricing condition for contract discount is not being applied - so has to be added manually.
Has anyone else applied EHP3 and seen this issue?
Thanks
Andrew

This issue is now resolved - an OSS message was raised with the note, http://service.sap.com/sap/support/notes/2074890, written to resolve the issue.

Similar Messages

Sub contracting Purchase requisition not created thru Service Order

Hi Experts,
I configured to create Service order automatically from Customner service.
Now we have the SM03 repair service order .When we try to create Sub contracting Purchase requisition.
(Selecting Subcontr tick in External tab of Components tab)system gives error saying --
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'
Message no. AD_SUBCON109
I checked the notes and It was not help ful.I understand I was doing something wrong in creation.
The control key used is SM03. Can any body help me in the above problem.
Regards
Rammohan.

Dear Sen,
The same error message refers to one of the following material provision indicators getting to me also:
"S" - an entry within table T417 is missing where KZBRS (A&D-Specific Material Provision) is not set
"X" - an entry within table T417 is missing where KZBLF (Rework Material from Subcontractor) is not set
"F" - an entry within table T417 is missing where field ADSUB_DEFDLV (Deferred Delivery) is not set
also, i Insert a row with S and keep MPCust and MPVend blank and Check the A&D MP box
getting following error "
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'"
Can u tell me the config for MPI??

GCU Discount not applied on purchase

I bought the Gamers Club Unlocked card online and took it into the store to activate it. After activating, I bought 1 game and preordered another (paid in full) game in store, using a $15 RZ certificate for part of it. I asked the cashier if it took off the 20% for Gamers Club, and he said he thinks the RZ certificate "supercedes" the Gamers Club discount. I didn't believe this was true, but didn't have time to argue and/or wait for a manager to try to figure it all out. First, is this true? I don't believe it is, because that wouldn't make much sense. Second, is there are way I can get the discount applied on those two games? If not, I can just return them and fix the GCU issue and rebuy them. If I do this, do I get my $15 RZ certificate back, or is that lost forever? Thanks!

Hello midwestpunk24-
I’m glad to hear you joined the elite of the elite by purchasing the My Best Buy Gamers Club Unlocked membership. Unfortunately, it sounds as though the store associate wasn’t completely up on how the program works and for that I apologize.
If the membership is activated correctly at the store, you should see the 20% discount on the new game and you should also be able to apply a rewards certificate to the purchase as well. With pre-orders, since you are not actually buying a game yet, the discount is applied when you pick up the game; in addition, reward certificates are not able to be used on a pre-order, so this transaction may have been tricky.
However, the main issue that I see is that it appears the GCU was not activated correctly, which is why you most likely did not see the 20% discount. If you can send me a private message with your full name, My Best Buy membership ID number and the BestBuy.com order number starting with BBY01 that had your GCU membership purchase on it, I can look further into this.
You can send me a private message by logging into the forum and clicking on the button across from my name on this signature.
Thanks!

Catalogs, code groups and codes not available in service order in Web UI

Hi,
I have created and maintained a subject profile for the service orders that i am using for my business scenarios. The same is visible under the objects tab in transaction data of the service order business transaction in the SAP GUI.
However the same are not visible anywhere in the Web UI (they are not available in the list of available fields as well in BSP_WD_CMPWB for BT116H_SRVO).
Can some1 pls advice me with the steps so as to make the catalogs, code groups and codes in my service orders available in the Web UI screen as well.
Will really appreciate if detailed steps are provided since I am new to Web UI technology.
Warm regards,
DP

Deepak,
I'm 99% sure (although dont quote me as I dont have a developer key so I cant finish my testing) that you're missing the context Nodes - so although you have the assignment block yuo have no link between the code set and the service order header. You havent referenced them in your comments on this post in any case.
Try this:
Go into BSP_WD_CMPWB
In the Browser component Structure open folder Component > Views
Double-click BT116H_SRVO/DetailsOV and in the structure expand to BT116H_SRVO/DetailsOV > BT116H_SRVO/DetailsOV > View Controller > DetailsOV.do > Context
Right-click on folder Context Node and click Create
Follow through the wizard defining a Z context Node (e.g. ZBTSubject) and a Model Node of BOL Entity BTSubject
Define any Dependencies etc you may wish to have and so on (most of the wizard is optional)
Repeat the same for the BOL Entity BTSubjectSet
Now go back in and see if your values are populating. I'm not a developer (and never have been), so I cant guarantee this will work as I dont have a developer key to test this, but I am quite sure that this needs to be done for you to get your values populating.
Good luck, Merry Christmas and a Happy New Year (& please award points if useful!)
Andrew Griffin.

Assignemnt field (ZUONR) not updating for Service Order RAS

Hello Experts,
I am facing an issue in service order RAS (Order Related Billing), here assignment field (VBRK-ZUONR and BSEG-ZUONR) is not updating against document type RV.
Same is not reflected against customer in FBL5N also.
Please suggest.
Regards
Rajat

Hi
Check the copy rules in tcode VTFL and/or VTFA. Check the field for assignment number. Check also the VOFM subroutines.
Also, check Note 301077 - User exits for the interface to accounting to change the value of ZUONR in BSEG (in ACCIT in the interface of this FM)
Regards
Eduardo

Req Assignment Tab page not coming for Service order

Hi All,
         I am working on simple service order SM01 type scenario. where in i am entering the operation & time for the same.
Now when i am going in to operation detail screen . I am not able to find out the requirement assignment tab page.
Strangely when i am using same reference object & creating the Maintenance order PM01 & doing the same as above it is showing the req assignment tab page.
Regards,
Amar

Hi , I have found out the solution for the same.
I have found that the external scheduling flag is
set for order type SM01 in customizing. Since this is set, requirement
assignment tab will not be populated as this will be taken care
externally.
Remove the flag in below customising path.
Plant Maintenance and Customer Service--Maintenance and Service ProcessingMaintenance and Service Orders-Scheduling--External Scheduling--Define for Each Order Type
Once this flag is removed for order type SM01, this tab will appear
for service orders.
Regards,
Amar

Settlement of costs only & not revenues on service order

Hi,
I have a revenue bearing service order.
The revenue that was posted through billing document was also posted to the cost center respobsible.
Now I want to settle only repair costs of service order to the cost center responsible.
But the system does not allow posting the items containing revenue on cost center.
How can I settle only costs to the cost center & not revenues.

Hi,
Is there any setting by which we can select the line item costs & revenue during order settlement.
I am using KO88 for settlement but I cannot see any way out to do selective settlement there.
Pl guide.
Also as you have mentioned that in cost center master record, uncheck the actual revenue posting lock, so that I can post the revenues. But in my case it is already unchecked (unlocked for revenue posting), but still system does not allow to post any revenue to this cost center.
Am I making mistake somewhere?
If I get solution to above two queries, my problem will get resolved.
Thanks.

PReq not generated from Service Order SM03 using Control Key SM02

Hi,
The PReq is not getting generated for Control Key SM02 for service order SM03. I am using PReq generation as "Immediately". The issue is I am filling all the required fileds in the External Processing Operation Popup Screen & saving my Service Order. After that when i check the Document flow - there is no Preq number & in Actual Data for External opration, i find the fileds i have filled in the Preq popup screen as blank (such as Material group, Purc. grp, cost element, vendor etc). I have checked the config also, but cant find any clue.
Thanks.

did you check the control key settings for sm02?
is it happening for this control key with other order types nd sm03 order type with sm03 ( external services ) control key?
is it possible to replicate it? it is also possible tht the order didnt get saved as the user didnt see some warning info in the bottom bar

Components of a product are not visible in service order

Hi all,
I have created a product and assigned various other products as components to it. For e.g i have created a refrigirator and assigned components such as compressor etc. But after i assign the product while creating service order , i am not able to see the components. For e.g i can only see refrigirator and not compressor.
I want even the components to be visible in the transaction Can anyone help me in doing that?
Regards,
Madhu.

Hi Madhu,
My Understanding:
1. When you enter the main/header product in the item details, the item catefory for the header product gets determined.
2. Your components can also be seen below as sub-items automatically, but the item category is not determined.
Tell me if my understanding is correct.
If Yes, u need to maintain the item category determination for the sub-items or components as well.
Transaction Type: Put the service order transaction type
Item Category Group: Check the item category group of your component product in COMMPR01 (Material tab/ Sales and Distribution Tab)
Item Category Usage: Leave it Blank
Main Item Category: Put the header product item category
Item category: Put the desired item category here.
Also ensure that in the customizing of the header item category, u have maintained the Structure Scope as A- Single Level Explosion of Structured Products.
Regards,
Shalini Chauhan

Urgent:pricing condition not determined in sales order

HI,
i have defined a pricing condition for a material . when i am creating a sales order the pricing condition is not determined;

hi
You must have done all the pricing related settings like access sequence, determination, condition type. Please cross check them once again. Also see if the condition record is picked up properly , is it bypassing ?
If every thing is fine, check the item category of that material and see if in business data of that item category Pricing is activated !!
regards
swapnil

Problem in pricing condition not coming is sales order

Dear Sir,
Here i create i new condition type for price ZMRP copy from PR00 in IDES , codition table & Access sequence also maintained in pricing procedure.
price is also update in ZMRP through vk11. but when we craete sales order my price ZMRP not coming automaticly. plz suggest where is error?
Regards,
Sahil

Hello,
Kindly check below mentioned settings.
create condtion table (e.g 510). Attach this table in the access sequence (say z001). Create condition type (ZMRP) & attach this access sequence to conditon type. Attach this condition type to your Pricing Procedure (say zz001). Attach this pricing procesure to sales areadocument pricing procedurecustomer pricing procedure. Maintain condition record for conditon type ZMRP in VK11. Now try to create sales order. ZMRP will automatically appear in the conditons.
Note: sales order which is already created, to make ZMRP appear in it, double click on item, go to condition tab. Press "update" button. Press "carry out new pricing" and you can see ZMRP appearing in the conditons.
Award pnts if resolved.
Regards,
Kishore

Discount not calculatig on Purchase order

hi,
maintained discount condition ZABC
when maintained in purchase order, it doesnt give effect anywhre?
Pls suggest
Alex

hi alex
I am not clear on ur reply
If i get it right
when user manualy type <b>condition</b> system is not calculating but when ur selecting by F4 it is calculating correctly
Then check Spelling that he is typing for condition also check case of that condition( conditions are case sensitive )
Vishal...

Save $20 promo not applying to The Order 1886

Hello, I wanted to know why the save $20 promo applies to both versions of MLB The Show(normal and anniversary) but not to both versions of The Order 1886(normal and collectors) you have for sale? I already bought the Order a few weeks ago on the daily deal but would love to buy a second copy for the collectors edition. Thank YouRobert

Hi Robert,
Our Save $20 on Select Sony Video Games offer is a fantastic deal! I'm ecstatic you are interested in participating and ordering the Collector's Edition of The Order: 1886. With that said, I'm sad to say that the Collector's Edition does not qualify for this offer and I apologize for any disappointment that this may cause you. If there are any other questions regarding this offer, please let us know and we will respond to the best of our abilities!
Regards,

Billing Plan Start Date not copied to Sales order from Service Contract

Hi
We are developing a process of Creation of Service Contract and then a order confirmation.
Now based on the Order Confirmation will bill based on the Bill Plan.
The Bill plan start date in contract header is not flowing to Sales Order header while creating with reference.
Then navigating to Header Billing plan and if we input the date the billing plan dates are displayed.
We checked the copy control settings and seems like the date is not copied.Is this a standard behaviour.
If so then do we have any work arounds to achieve the same. Because the contract start date can change before confirmation.
So business wants a sales order confirmation to be created after contract creation and bill periodically as per the Sales order instead of contract.

Hi,
Appreciate ur quick response. But instead of FKDAT i need the FPLA-BEDAT to be flowed to Billing Plan.Right now iam entering the following date manually at header.Instead if it copies from Contract header then manual entry could be neglected.
Is it possible with the same routine to code with the above mentioned FPLA-BEDAT.

SRV: pricing condition not picked up in service confirmation

Hi gurus,
We maintained the service scenario with R/3 billing, and using service contracts. When we enter a service order,
the contract is determined, and discounts (on spare parts) are taken into the pricing. When copying the item
to the confirmation, the discount is copied as well. So far everything works as desired.
However, when entering a spare part directly into the confirmation, the discount is not taken into pricing. Contract determination works fine. So the contract is determined, but the discount is not found.
Please help us solving this matter.
regards,
Wim Olieman

Hi,
Please check the Copy conditions tick in the SPRO path for Copy control for item categories between the contract item and the confirmation item for spare parts.
Regards,
PP

Contract Pricing Discount Not Applied to Service Order

Similar Messages

Maybe you are looking for