Control the size for a JButton in a cell of JTable

Hi,
I am trying to add a column buttons on cells of a JTable. I followed the example from http://www.esus.com/docs/GetQuestionPage.jsp?uid=1285 and made it work (thanks).
But, the buttons always resize to fit the column. Is there a way I can set button size, so the button will be smaller?
Any information would be appreciated. Thanks in advance.

Use a panel as a renderer and add the button to the panel, and manually set the preferred size of the button yourself. Then when the panel is added to the cell it will be resized, but the button will remain at its preferred size.

Similar Messages

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

How to control the size of live data in Coherence?

How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to control the size of SVG images in epub files?

There is unfortunately no support for SVG files in InDesign.
Most of my images in jpg convertes nicely, but the small ones do not.
Therefore I want to use SVG files which I have created in Illustrator.
But how do I set the size in the epub file? Right now, whatever I do, they come out too big and I don't know how to control the size.
Is there a program, like Sigil or other, that can place the image for me - I'm no html wizard you see....

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to control the size/position of LabVIEW DLL front panel in MFC application?

I would like to make a MFC application which loads a DLL generated by LabVIEW application builder. How can I control the size and position of the front panel in my MFC application? Thanks.

Did you build the DLL from Labview yourself? If so, you just add another VI to the list. This VI accepts the Title of a front panel and top,left,right,bottom value of the front panel (VI property WindowBond). I'm not familiar with building DLLs using Labview so I really could not help you on how to build the DLL, but I believe it can be done (multiple VIs as multiple functions in a single DLL).
To get the windows bonds for a vi, you need to use VI server property. Check out the examples under labview directory. There are plenty of them to demostrate how to use this feature.
Joe

Controlling the Size of the ADR directory - 11g

With the new ADR directory for problem diag. information such as traces, dumps, alert logs etc, what is the best way to control the size of the files system? Is there an Oracle provided tool for purging old files or do you need to write your own script?

Nothing has ever purged the alert log in Oracle and if something did I would advise every DBA to disable it immediately.
The XML version of the alert log will maintain itself. The text version, as stated above, works the same way it always has and hopefully always will.
As the DBA it is your responsibility to read that file, at a minimum, once every day. While you are doing that you can archive it, drop it, and truncate it.
If it is growing too large you likely aren't doing your job. <g>

Set specific size for JTextfield/Jbutton in BorderLayout?

can some one tell me how to set a specific size for JTextfield/JButton in Border/BoxLayout please?
I stried setSize, setPrefersize, setMAxsize, setMinsize, setBounds... but it won't work?
For example. If I add a jbutton to a jpanel, which has borderlayout, it will take up ALL the space in that jpanel.
Thanks

Typically you use a BorderLayout for the high level layout and then add panels using other layouts to the BorderLayout. So for example on a simple dialog that is using a form that asks your for your first name and last name you would build a panel with those fields and add that panel to the center of the BorderLayout. Then you would create another panel for the "Ok" and "Cancel" buttons which would typically use a FlowLayout. Then you add that panel to the South of the BorderLayout.
The Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html]How to Use LayoutManagers has all the information you need to know on using layout managers.

Is there a way to control the size of the pictures taken by iPhone?

The photos taken by iPhone are fairly large photos and require quite a bit of time for transfering when taking hundreds of photos. Is there any settings in iPhone that can control the size of the pictures being taken? Thanks

Sorry, no. You might try looking in the App store for a third-party app that provides this functionality, but such is not natively built into the iPhone.

How do I control the size of my photos in iWeb?

Hello
I wish to ask if it is possible to control the size of a photo in iWeb when publishing photos.
What I want is that people can press on any photo in my collection and see it in high resolution. But at the moment it is messing with my photos. Some come up tiny regardless of them being a 4MB Pixel shot, and most of them if not all of them are restricted to one size...
Thank you...
-Steve

iWeb resizes photos in the following cases -
When using the of the photograph templates where you drag and drop your pictures:
1) Size is capped at 800px x 800px for the slide
2) Files are compressed, usually ~120KB\
3) New thumbs are created (the small image you click on); those tend to be 35-45KB.
If you add a shadow, reflect or graphic option - odds are iWeb will convert your JPEG into a PNG and file size mushrooms. I've been created very compact banners, but due to PNG coversion the size has gone up by 6-8x...
I have NOT looked into just adding a photo to page and seeing what happens to the file size. Most of my tug of war has been with slide show and trying to understand why the 300-500KB files I was using were looking so bad. Now that I know iWeb is doing, I can sort of work around it.
It doesn't mean I'm happy. I'm going to add a gallery page with my favorites, format for roughly 1000x800 and keep the file size around 400 KB. I do all the file resizing in Photoshop CS2.
To put all this in perspective, i have around 325 picture uploaded - most were resized to 450 KB for the web. That 146 MB just for pictures. Add another 10 MB for web content, etc. I thought ~160MB should be used up on the iDisk. Due to iWeb's compression, usage is only 70 MB for this site.
www.pebbleplace.com

Controlling the size of the popup window when using target

Using the anchor tag and the target attribute (<a
target="_blank"...>), how does one control the size of the new
window? Or is this not possible? Thanks!

use javascript. if you want to put it in <a> tag, then
you can do it this way:
assuming your page is index.cfm, then:
<a href="index.cfm" target="_blank"
onclick="window.open('complete
URL','name_of_window_to_open','width=100,height=50')">test
link</a>
OR use other tags such as
<span style="cursor:pointer"
onclick="window.open('complete
URL','name_of_window_to_open','width=100,height=50')">test
link</span >
If not familiar yet with window.open, go to this link for
reference:
http://msdn2.microsoft.com/en-us/library/ms536651.aspx

How to set the size for height of iView tray?

Hi,
I have created a ABAP webdynpro component and integrated this comp with iView. Then i integrated iView into Page in portal. That is working fine.
But the size of tray/window which is displayed in the page is very small.
How to increase the height of that Tray/window/iView containing my component?

Hi,
By changing the maximum automatic height and Minimum automatic height property of the iview you can set the size for height of your iview.
to do this follow the setps:
goto content administrator -> portal content -> your folder where you created your iview or directly to your iview -> right click -> open -> object,
and now in property category choose appearance-Size from the drop down menu and set the above properties to your required height.
if you want the end user to modify this property set the property to read/write .
*********please reward points if the information is helpful to you********************

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

And, in general, how can I control the size of the firefox window?

The Firefox window has become bigger, even before I clicked "full screen."
So again, how do I control the size of the window/screen?
== This happened ==
Every time Firefox opened

when opening a link within a window, I want it to open smaller so I can see the window behind it. How can I control that?

Controlling the size of You-tube links

Is there a way to control the size of the graphic from an You-Tube link?
I have embedded a link to the clip in an HTML snippet but don't seem to be able to affect the size of the initial image without truncating some of the image.
Anyway to expand or decrease this viewing box proportionately?

What's the URL of your site so we can examine it first hand? The snippet's size can be enlarged and will stay that way as long as you don't hit the Apply button after. Maybe that will do what you need.
OT

How to control the permission for reports in share folder?

Hi Experts,
In OBIEE 11.1.1.6.0.
I have created two folders in share folder,one is sales folder which contains some sales reports,and the other is dashboard folder which contains some dashboard pages that have these sales reports.
So I want to new users who do not access the sales folder, but can view the sales reports in dashboard pages.
How to control the permission for reports in share folder? Thanks for your help.
Note: Dashboard pages have whole sales reports for showing.

Hi User,
1. Give access to the users for all reports.
2. Give No Access to Retail Folder
3. GIve read or full access to dashboard folder.
To set the permission , click on the object/folder bottom left you will find Permission. you set there.
Mark if correct,
fiaz

Control the size for a JButton in a cell of JTable

Similar Messages

Maybe you are looking for