Controling 2 Markers on Slider
I have a slider with two markers (see file attached).
This slider is used to select an area of datas to analyse.
The pb is that I don't know how to control the slider so that the operator can't move the first marker position after the second marker (and second marker must never been lower than first).
Thanks.
Eddy DUCHENE
12 F Chemin de Boutary
69300 CALUIRE ET CUIRE
[email protected]
Attachments:
2MarkerSlider.vi 27 KB
Hi,
thanks for your response;
at the end, it is the result I would have : but the Vi does not resolve entirely the pb : you can always move the first marker after the second (IHM and see the red color from beginning of the slider to the second marker) , even if after, when the operator release the mouse, position of the two cursors are same.
I don't know if there is a solution to prevent the operator to move the first cursor after the second (and second before first of course) by IHM ????
Eddy DUCHENE
12 F Chemin de Boutary
69300 CALUIRE ET CUIRE
[email protected]
Similar Messages
-
Best way to control audio over multiple slides-iMovie or QT Pro?
I have a 30-slide presentation, and due to the horrendous handling of audio files by Keynote I need figure out the least painful way of controlling audio spanning multiple slides.
My end goal is to have a Quicktime file to put on the web, and to burn to a CD or DVD for viewing on individual computers. There is audio spanning 3 slides (a Garageband mix with voiceover narration built in,)and different audio for background for different groups of slides.
Least painful method to attempt this and get ACCURATE TIMING for the end product?Make a series of Keynote presentations, one for each complete audio track. Export each as a QuickTime DV (digital video) clip. Launch iMovie and import the clips into a single iMovie project; tweak each clip's audio, as necessary. Finally, export the assembled iMovie to your intended QuickTime format.
-
my iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens
Hi Goofy Goat,
Welcome to the Apple Support Communities!
It sounds like you have done some great troubleshooting for your iPod nano that is not responding. In this situation, if resetting it did not resolve, I would suggest restoring the iPod back to its factory settings and then sync your content back onto it from iTunes. Please use the following article as a resource for restoring.
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Have a great day,
Joe -
Hi People. I was doing my walk and listening to music using my 4s when in the middle of a song, the volume control would just automatically slide back to zero like it has a mind of its own. What gives?
Hi djblue1969,
I see that you may be having issues with your volume buttons on your iPhone. Here is an article for you that will help you troubleshoot this issue:
Get help with buttons and switches on your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT203017
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Where is the frame rate setting control when making a slide show?
I am trying to make a slide show using QuickTime Pro and cannot find the frame rate control.I put all my consectively-numbered jpegs in one folder. I then clicked on "File," the "Open Image Sequence," then a window opened up and I click on the first jpeg in the series of photos I want in my slide show. Then the first image appears in the QT Window. The instructions next say that I should be able to change the rate at which each slide/jpeg appears, but it doesn't tell you where to find the "frame rate" so I can change it. It doesn't appear at all on its own, so where is it? Anything else I'm missing? Thank you.
barbaric135
What version of Photoshop Elements and or Premiere Elements are you using and on what computer operating system?
In addition, could you please clarify?
It sounds like you are creating your slideshow in the Elements Organizer. Where are you seeing these distortions and blurs, in the Elements Organizer Slideshow Editor Filmstrip or in the Premiere Elements workspace after you have transferred the slideshow from the Elements Organizer 9 Slideshow Editor to Premiere Elements workspace?
What are the pixel dimensions of the photos in this slideshow and how many of these photos are in the slideshow? What format are they in..jpg, psd, other?
With regard to what you wrote:
Also how do I transport them from Elements to Premier, it has a tab to do that but when I get to the elements file I don't know where to drag and drop into.
If you are in the Elements Organizer Slideshow Editor and use the Output option Edit with Premiere Elements, then you would expect the automatic transfer of the slideshow to Premiere Elements, with a copy in video format (.psess) in the project media as well as on the Timeline. Nothing for you to drag and drop.
For all those reasons, I am asking for clarification.
Thanks.
ATR -
Controlling video in a slide in Keynote '09
Dear Common Wisdom:
Can I put a video into a keynote slide and control it there?
Thanks!
Kostasyes, as soon as you move the mouse when a movie is playing, it will give you the controller under the movie.
-
Is it possible to create Indicater and control on same holizental slide?
Is there any possible to create Indicate values and change values on same Horizental slide. Because I am giving loop values to Horizental slide to indicate my values, after certain time if user wanted to move slide bar to another possition. it should move that perticular location then run loop from that value.
please send me the solution for my problem..
thank you..
SashiThe loop counter is a built-in variable that you cannot control. It will always increase.
For your purpose, you must create a seperate variable that contains your index as you want to use it.
The attached VI shows a possible solution. Let me know if this makes sense to you.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
horizental_slideNEW.vi 26 KB -
HELP: Controlling speed of photo slider
I need some help in controling the speed of this simple photo
slider. Here's what I have.
Individual movie clip(Photo):
onClipEvent (enterFrame) {
_root.xdist = (_root._xmouse-_root.xcenter)/20;
Main Action:
movieWidth = 300
xcenter = movieWidth/2
// this code loops right
function movePiece (target) {
with (target) {
_x += xdist;
if (_x>movieWidth+_width/2) {
_x = -_width/2;
if (_x<(0-_width/2)) {
_x = movieWidth+_width/2;
What action code, etc. can I put into this code to slow down
the scrolling or control the scroll speed? Any help would be
appreciated! ThanksThanks, I can't believe I missed that. That worked. The
higher the # the slower.
Thanks-B -
Controling fonts in title slides
some of the title slides, such as lens flare, do not give you the button in the upper left corner to control fonts. Is there no way of controling fonts on some title slides? Why?
Thanks
bobno responses, so removing question.
-
Controlling user flow and slide access
Hi everyone!
I'm a Captivate newby
Here's my problem. I have a set of slide, and I want to be sure the user has completed (listened to) the first 5 slides before going to the 6th.
I've just seen that I can execute javascript. Here's my possible solution.
On slide exit (of slides 1-5) I execute a script that add the number of the slide I've just finished in an array.
If the user try to enter in the 6th slide, I execute a script that checks if the array contains the number from 1 to 5. If not, I jump to the first slide.
Is this a reasonable solution? Can I control all these events in javascript? Or is there a better way to solve the issue?
Thanks,
MarcoUsing Captivate User Variables and Advanced Actions would be a much easier solution than trying to implement JavaScript.
You just need to set up a variable that will be incremented by each successive slide the user visits. When they get to the sixth slide, have the variable value checked by a Conditional Advanced Action. If the variable is the correct value, Continue play, else jump back to the beginning (or whatever the appropriate action should be). -
CONTROLLING TIME OF STILL SLIDES IN IMOVIE
WHEN I TRY INSERTING A DESIRED TIME FOR A SLIDE IN "CLIP ADJUSTMENTS" THE RESULT IS NEVER WHAT I ENTER. IF I ENTER 2 SECONDS, FOR EXAMPLE, I'M LIABLE TO GET 6S. IF I EXPERIMENT GOING DOWN IN SECONDS, I GET ALL THE WAY TO .1, AFTER WHICH IT WILL GO TO 3.5 OR 4, BUT NOT LOWER. HOW CAN I GET THE DURATION I WANT?
ALL CAPS means 'shouting' on this board ... please be polite to others.
the time-format in any video is (hours:)minutes:seconds:frames ..
so, two seconds is 00:02:00
if you need very short stills, switch off the Ken Burns effect: select the still-clip, click the crop tool, choose crop or it. -
Hello,
Is there a way to make it so that the audio preview that happens when you hold Control as you slide the Current Time Indicator handle is the default, so that you don't have to hold Control every time you slide it? It's gotten to where I'm holding Control anytime I slide that handle, so it would actually be quite convenient to be able to make the audio preview the default setting instead of requiring the holding down of Control. I searched in options but if it's there I must have missed it.
ThanksNo.
You can submit feature requests here:
http://www.adobe.com/go/wish -
How to make my SLIDER control the movement of animations: ( fast & slow)
hello!
i wanna do water dropping animations. using a slider, to controlled how fast and slow the animations can be.
please help me!!!I need help about controlling my animations with slider.
I already know about slider & water dropping animations, but how to make this 2 things interract.
Right now i have slider and water dropping animations, but when i scroll my slider up and down, my animations still with the same speed.
In my opinion, i think, i need to make one func/method that take var from slider and transfer it to water dropping var(controlling the speed of anim...).
eg: (coding)
//class bla...bla...bla...
JLabel sliderValue = new JLabel("Value = 25"); // slider var
JSlider sliders = new JSlider(JSlider.VERTICAL, 0, 50, 25);
WaterDropPanel drop = new WaterDropPanel(); // waterdropclass
JButton start = new JButton("Start"); // start anim...
JButton stop = new JButton("Stop"); // stop anim...
//waterdrop class...
class BulatanPanel extends JPanel implements Runnable
private Thread runner;
int yPos = -20;
int yMove = 4;
void playAnimation()
if (runner == null);
runner = new Thread(this);
runner.start();
void stopAnimation()
if (runner != null);
runner = null;
public void run()
Thread thisThread = Thread.currentThread();
while (runner == thisThread)
yPos += yMove;
if (yPos > 310)
yPos = -20;
repaint();
try
Thread.sleep(10); // var controlling the speed of anim...
catch (InterruptedException e) {}
public void paintComponent(Graphics comp) {
Graphics2D comp2D = (Graphics2D)comp;
comp2D.setColor(Color.black);
comp2D.fillRect(0, 0, 250, 240);
comp2D.setColor(Color.red);
comp2D.fillOval(110, yPos, 20, 20);
// slider event handling... ( In my constructor)
public void stateChanged(ChangeEvent e)
sliderValue.setText("Value = " + ((JSlider) e.getSource()).getValue());
I'M SORRY IF ITS TOO LONG -
How do I get data input from a user interface to control the
position of the pointer on a slider on my bar chartThe position of the pointer on the Slider is controlled by
setting the Slider's value property:
<mx:Slider id="miles" minimum="0" maximum="5000" />
miles.value = 238;
I don't know what other control you have in mind for changing
the position of the pointer, but most interactive controls support
the change event:
... change="miles.value=event.currentTarget.
value" ...
If the control were a NumericStepper, then value would be the
right property; if the control were a ComboBox, then you might want
the currentIndex or perhaps a field of the currentItem. -
myComp = app.project.item(1);
mySolid = myComp.layers.addSolid([1.0,1.0,0], "my square", 50, 50, 1);
var myWin = new Window("palette", "Transform", undefined);
myWin.orientation = "row";
var myOpacity = myWin.add("panel", undefined, "Opacity");
myOpacity.orientation = "column";
myOpacityText = myOpacity.add("statictext", [290, 20, 380, 40], "Current value:");
myOpacityDisplay = myOpacity.add("statictext", [385, 20, 425, 40], "100");
myOpacity.add("statictext", undefined, "Kontrol Opacity");
theOpacity = myOpacity.add("slider", [20, 20, 230, 45], 50, 0, 100);
var layerOpacity = mySolid.property("opacity");
theOpacity.onChanging = function()
var val = Math.round(theOpacity.value);
myOpacityDisplay.text = val;
layerOpacity.value = val;
myWin.center();
myWin.show();I don't write scripts that do this because the features are already available with Expression Controls and expressions. That's the route I would suggest. You are reinventing the wheel. If you want specific help on scripting then try asking some questions in the scripting sub forum for AE. You'll find the forum under sub communities.
If you just want to create a slider for opacity that you can add to any layer you select first add an expression control slider to the layer, then press t to reveal the opacity property, then hold down the Alt/Option key and click on the stopwatch to start and expression, then drag the pickwhip to the slider control. Now, with transparency selected select Animation>Save Animation Preset and give it a name. Now when you need a slider to control a layer, or to control a bunch of layers simply select them and apply your preset.
You could also put your expression control slider on a null, give the name a null, apply the expression to a layer and then save the transparency property as an animation preset. Now if you have 50 layers you want to control with a single slider just add the null, change the name, then select all 50 layers and apply your animation preset.
I have a library of about 200 custom animation presets that use expressions to do most of my repetitive tasks. It saves a ton of time. Heres one that fades a layer in and then out based on the in and out point of the layer. I use this one daily. You'll see what I mean if you apply it to a layer. fadeIO.ffx
Maybe you are looking for
-
I am facing a caching problem in the Web-Application that I've developed us
Dear Friends, I am facing a caching problem in the Web-Application that I've developed using Java/JSP/Servlet. Problem Description: In this application when a hyperlink is clicked it is supposed to go the Handling Servlet and then servlet will fetch
-
How to set VPN Connection in Windows 7 64bit?
Hi How can I set up a Vpn in connection in Windows 7 x64 bit. Thanks.
-
Batch testing using the Sequencial Model
One of our Test Engineers is uncomfortable with the Batch Model provided with TestStand 2. Is there an easy way of using the Sequential Model as a Batch Model (testing multiple UUTs). The way I understand it, there is much more flexibility and capa
-
i have just got a blackberry torch 9800 and i downloaded app world and cant find it in my fone and the fone colour is normally black n blue my is white and its really funny its makin my pics very wired and cant c them proper am really confused hope s
-
Nested Application Module State
As I understand it Application Modules (AM) that are nested inherit the parent 'Transaction'. My question is do they inherit the Stateful/Stateless behaviour from the parent ?