Controlling area does not exist in assignment ?

Hi,
I've created & assinged controlling area to the company code , But then When I used PPOME to create org unit and assign the Controlling area , It did not exist in the list ? How can i configure this
Thanks in advance

Hi,
Check in V_TKA01_GD table (assign company code to controlling area) whether controlling area is assigned to company code properly or not. If it is assigned properly then in PPOME Tcode in Account Assignment tab once you enter your company code Controlling area will be selected automatically.
If controlling area is not assigned to company code properly then you will not able to see that in PPOME. In this case you can take help from FI consultant as they only create Controlling area and assign it to company code.
Regards,
GRM

Similar Messages

Extraction error "Target cost version in controlling area does not exists"

Hi Gurus,
I am trying to pull some data from a SAP OLTP system into SAP BW 710 system, using extractor "0CO_PC_02". The data load is failing with the below error message:
Target cost version in controlling area does not exist     KN     147
Target cost version 2 not defined. Check your entry     KV     35
Internal program error ( Order 000010510554 Version 002 )     RM     11
Errors in source system     RSM     340
The same error is thrown when I am trying to execute the extractor in RSA3 in the source system.
Please help me with the resolution of the same. It's a high priority job we are handling as of now in this.
Thanks & Regards,
Vikas Kr.

You are attempting to display data on a target cost version that does not exist in controlling area.
see this http://forums.sdn.sap.com/thread.jspa?threadID=1609418
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YV-KN147

Error AFAB---Cost center '' in controlling area does not exist

Hi,
While run depreciation appear the error message KI222, even if cost center exists and I can post on hin direct from FI.
Regards,
IM

Hi,
Error KI222 is caused if some cost centers do not have   leading zeros in table ANLZ.
To avoid error KI222, you need to add the zeros in ANLZ-KOSTL.
Example in ANLZ:
BUKRS ANLN1          KOSTL
XXXX   000000084059   0000001214
XXXX   000000089990   1214
Regards Bernhard

Confirmation control key does not exist

There is a old one PO, which was created with confirmation control key ZSC1 ; Now issue is ZSC1 has been deleted but it is showing in po, now user want to close the po as want to ticked the "delivery completed" ind. in the Delivery tab page at Item level in the po.
In this cas he is facing the error as "Confirmation control key does not exist" so:-
1. How can be close the po.
2.Is there any option, from where we can check the change control i.e. can be checked when ZSC1 was deleted.

Hi Jurgen,
I think you misinterpret regarding this issue.
confirmation control key is not deleted in PO.
It is deleted from configuration setting I mean from IMG -> Material Management -> purchasing -> confirmation -> Setup confirmation control.
since it's exists in po but not in config. thats the reason system given us that error.
so my question was:-
how to get change control for the same, i.e. when it was deleted from config. setting
And how set del. completed ind. in po for closing the po, bcoz it's showing error as "Confirmation control key ZSC1 does not exists"

Exit Button in Travel Assistant - Area does not exist message

My client is on EHP2 for SAP NW 7.0 SP15 & EHP5 for SAP
ERP 6.0 SP12. I believe the portal is also in the process of being upgraded
from 7.01 to 7.4 (although the issue I am having occurs in both new and old
portal systems).
The Homepage Framework was originally customised for Travel
Management to use predominantly Z* Area Group Pages/Areas etc (rather than the
SAP-standard config) and is all working fine apart from one issue with the Exit
button in the Travel Assistant application (FITV_POWL_ASSISTANT).
Note that the FITV_POWL_ASSISTANT application is called with
parameter SAP_FITV_EXIT_OP=CallAreaPage. The presence of this parameter means
the Exit button is available within the application, and the area page should
be called when the button is pressed.
When pressing the Exit button however the message “Critical
Error: Area ZASSISTANT_TRAVEL_ERP2005 does not exist” is raised.
The Travel Assistant portal role contains the same iViews as
the Travel Employee portal role, but has an extra iView called “Self Services Assistant”
which appears as an additional subtab in the portal.
The parameters passed within this iView are:
“sap.xss.menuarea=ZASSISTANT_TRAVEL_ERP2005&sap.xss.menuargrp=ZSAPDEFAULTTRA_ERP2005&sap.xss.menuhdr=SAPDEFAULT&sap.xss.menunobuffer=true”.
Press Exit:
What I don’t understand is that the area page is appearing correctly
and the application is called without issue but when pressing Exit the
navigation can’t return to the area page.
Can anyone suggest what might be causing this error?

Thanks for the suggestions Siddharth.
We do have FIN_TRAVEL_1 active but the business function mentioned in note 1577326 is not.
In the end the issue was resolved by changing the Link Resource assigned to the ZASSISTANT_TRAVEL_ERP2005 Area Page to a resource with a different portal PCD URL, so that now the correct page is called when Exit is pressed.
I think the way this Area Page was implemented was not ideal as all other Area Pages in our setup are called from a separate Area Group Page/tab, whereas this one was not.

Error - control indicators for control area do not exist

Hi All,
When I am trying to hire a person and entering his personal data, I am getting this error:
control indicators for control area XXXX do not exist
Please help

I'm guessing this error is out of the Coding Block check for Controlling.. ie the function call COBL_EX_CODINGBLOCK_CHECK.. put a break-point inside this function call & verify if any settings are missing..
~Suresh

Mission Control: Application Does Not Switch To Assigned Desktop Once Open

I have Adobe Photoshop CS5 assigned to DESKTOP 2 in Mission Control. If Photoshop is closed, and I launch it from the dock or Launchpad, Lion switches to DESKTOP 2 to launch Photoshop. This is what I want.
However, if Photoshop is already open and I click on an image file in Adobe Bridge, or Finder, Lion does not switch to DESKTOP 2. Photoshop will launch on whatever desktop I am on, in front of Finder or Adobe Bridge.
I have experienced this when I have "Automatically rearrange spaces based on most recent use" and "When switching to an application, switch to a desktop with open windows for this application" on or off. Both settings seem to have the same problem.
Is anyone else experiencing this? Any suggestions? I used this feature extensively with Spaces, and Lion is killing my workflow unless I can get this figured out.
Thanks!!

Wait DONT reinstall yet!!! there is a switch for this:
I bet yours is toggled the wrong way.
Message was edited by: coocooforcocoapuffs: never mind, did not read your post properly.

Error during acquisition transfer: Depr. area does not exist

Hi,
I am getting following error while posting WBS through CJ88
Message no. AAPO107
Diagnosis
According to the specifications for transfer variant 5, depreciation area 30 should be transferred gross. However, the recieving asset 3300053-1 does not manage this depreciation area.
Procedure
Check the transfer variant and the receiving asset.
Can you please help
Thanks

This is probably a question best for the asset section but check the Depreciation areas tab on the asset AS03 and see if it has depreciation area 30.

Control indicators for controlling does not exist

Hi,
While doing g/l posting I got this error "Control indicators for controlling area----does not exist"
Please help me with the solution.
Regards,
Jyoti

your config is missing go to tcdoe OKKP, selecet your controling area and then select the tab activate components and make sure they are active and the boxes are ticked
Points will be appreciated
Regards,
Zaid Azam

The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...

Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

Error in VL02N: Business Area 701 does not exist

Hi experts,
There's an error that occurs while trying to post a delivery in VL02N, a display log is opened with the message "Business Area X does not exist", the Business Area "1701" is already created, nevertheless, when I try to post the delivery I cheked the Business Area in the Financial Processing tab and it appears as "701" instead of "1701".
I hope any of you can help me.
Thanks in advance
Eloy Venegas

hi,
For the Sales Area, check the rule for determining the Bzness Area(S&D>Basic Functions>Account Assgmnt/Costing>Business Area Account Assignment>...) and make sure ur bzness area '1701' is assigned to the sales area/or any combination that you've defined in the rule.
Let us know, if this helps?
Reward, if helpful.
Rgds,
Raghu.

Assign PO Smartform in NACE error-Processing routine does not exist

I have created a Z-Smartform and Z-driverProgram and assigned both in NACE:
   Medium-           Program-                      Form-                                 PDF/Smartform-   Type
Print output-     ZSFPOREPORT-                          -ZSFPOREPORT- SmartForm
but a error message : Processing routine in program ZSFPOREPORT does not exist ..
Do we need to code in driver prog under a Subroutine and call the same (or) Do we need to create a Form with Special Interface parameters similar to Entry_NEU ..
I am not sure as ENTRY_NEU is for a Script but we need to assign a SMARTFORM here...
So Gurus suggest.....

Hi
DATA:   fm_name TYPE rs38l_fnam.
*-- Call the Smartform for Label Printing.
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname           = 'ZLS_XXXXX'
          IMPORTING
            fm_name            = fm_name
          EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CALL FUNCTION fm_name
          EXPORTING
            v_XXXX         = v_YYYYY
            v_matnr          = mara-matnr
          EXCEPTIONS
            formatting_error = 1
            internal_error   = 2
            send_error       = 3
            user_canceled    = 4
            OTHERS           = 5.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
But this pattern is not same for all driver program. So you can do the following:
Step 1: Click on the area where you want to write function module.
Step 2: Click on "Pattern" at the top of the SAP window. Enter the function name as SSF_FUNCTION_MODULE_NAME and
             press ok.
Step 3: Now fill up the reqd fields. Give the name of the smartform in
             EXPORTING
            formname           = 'ZLS_XXXXX'
Step 4: Now go to the SMARTFORMS program Environment->Function Module Name and copy the Module Name.
            Again click on "Pattern" and paste the module name. Again you will get a pattern(i.e. the second function)
Step 5: Replace the Function module name with "fm_name" as shown in the code above.
Then your code is ready.
Thanks & Regards
Rocky kr. Agarwal.

Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, an

Hi,
i am creating schedule agrement or 1 st april 2009 getting error
Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, and variant

Hi
Try
u can do one thing create commitemnt item for the year 2009. public sector management - Create commitmen titem
then u assign commitment item to GL in Fmderiver Transaction code
then u post
Reagards
Roobal

Getting an error -ORA-20001: FLEX-ID DOES NOT EXIST in migrating Assignment

Hi,
I am working on migration of persons data (Person/Assignment ) etc. in Oracle HRMS. While migration of Assignments data I am getting an error: ORA-20001: FLEX-ID DOES NOT EXIST.
Please help me.
Regards
Sr
Edited by: user10939296 on Jul 9, 2009 1:21 AM

This error occurs as FLEX-ID for different combination for KFFs has not been generated. Therefore while migration your script is unable to fetch the Flex-id as they are not generated. You can work your way around by entering the possible combinations of KFFs for a single employee and eventually entering data for one employee manually.
eg. if for People Group Flexfield there are two segments A and B
A having LOV Corporate and Others
B having LOV Executive and Non Executive
Then you have to enter the possibilities from the frontend for one employee:
Corporate.Executive
Corporate.Non Executive
Others.Executive
Others.Non Executive
HTH

Controlling area does not exist in assignment ?

Similar Messages

Maybe you are looking for