Conversion from decimal to binary!

int i=1234;How can I convert an integer to its binary form??

int i = 1234;
String binInt = Integer.toBinaryString(i);

Similar Messages

Conversion of Decimal to Binary String

Hello Labview People:
I'm rather new to Labview, so this may be a simple-minded question . . .
I would like to take a numeric control and have the decimal input
converted to a binary string of 8 bits. So, for example, if I were to
put in the number '127', I would get out (on an indicator) the string:
01111111
The number '128' would show on the indicator as:
10000000
It seems to me that this should be simple, but somehow I cannot figure
out how to do it. Must an array be built bit by bit to accomplish this?
(I'm afraid I don't yet know how to build arrays.)
Thanks in advance for any help you provide!
Sent via Deja.com http://www.deja.com/
Before you buy.

Or, you can go under the numeric function, and look for conversions, get
decimal to byte array conversion.
Then what you need to do is to get an array selection vi, and index to zero.
I don't remember the exact name of the VI's because I don't have LabView
here with me.
Perhaps this complicates things
Steven
"Timo Miettunen" wrote in message
news:[email protected]..
> use format into string VI from string palette
>
> format string should be "%08b" for 8 bits, "%016b" for 16 bits etc.
>
> timo
>
> Ananda Dave wrote:
> >
> > Hello Labview People:
> >
> > I'm rather new to Labview, so this may be a simple-minded question . . .
> >
> > I would like to take a numeric control and have the decimal input
> >
converted to a binary string of 8 bits. So, for example, if I were to
> > put in the number '127', I would get out (on an indicator) the string:
> >
> > 01111111
> >
> > The number '128' would show on the indicator as:
> >
> > 10000000
> >
> > It seems to me that this should be simple, but somehow I cannot figure
> > out how to do it. Must an array be built bit by bit to accomplish this?
> > (I'm afraid I don't yet know how to build arrays.)
> >
> > Thanks in advance for any help you provide!
> >
> > Sent via Deja.com http://www.deja.com/
> > Before you buy.
>
> --
> -------------------------------------------------
> Timo Miettunen
>
> Fincitec Oy Production Department
> e-mail: [email protected]
> Address:
> Lumikontie 2 Tel: +358-16-2151245
> PO BOX 11 Fax: +358-16-221561
> FIN-94600 KEMI Finland
> -------------------------------------------------

Converting from decimal to binary to hexadecimal to octal

hello everyone,
my question is, Is there a way to get decimal input from user and print the binary, hexadecimal and octal value of that decimal? just like C does in printf command

http://java.sun.com/j2se/1.3/docs/api/java/lang/Integer.html

Conversion from decimal to char

Hi experts,
i am using some function module which has parameter of type char(132) . now i have to pass packed no p(7) decimals 3
to this how to do it . if i send directly function module raising run time error ( type conflict).
how we can do this.
regards,
santosh.

Hi Santosh,
Try this code for conversion.
DATA: AMOUNT(7) TYPE P DECIMALS 3.
DATA : VAR TYPE CHAR13.
DATA : VAR_1(132).
AMOUNT = '12345.333'.
WRITE AMOUNT TO VAR.
VAR_1 = VAR.
CONDENSE VAR_1.
AND PASS THE VALUE OF VAR_1 TO YOUR FM.
HOPE THIS WILL SOLVE YOUR PROBLEM.

Decimal to binary conversion

hi...anyone here knows the code to convert decimal to binary.Please help me!!!

Here's the answer in a riddle - to fill in the blank line is to understand the algorithm used - have fun!
class BinaryConverter{
   public static void main(String []args) throws Error{
      try{
         new BinaryConverter(Integer.parseInt(args[0]));
      }catch(ArrayIndexOutOfBoundsException e){
         System.out.println("No argument entered");
      } catch(NumberFormatException e){
         System.out.println("Enter whole numbers only");
   private BinaryConverter(int i){
      System.out.println("The binary number is: ");
      convert(i, 0, (long)Math.pow(2, 31));
   private void convert(int num, int i, long max){
      if(num / max==1) System.out.print("1");
      else System.out.print("0");
      num %= max;
      // there is a line deliberately removed here!
      if(i++ % 8 ==0) System.out.print(" ");
      if(max >0) convert(num, i, max);
}

I want to convert from decimal (5, 2) to decimal (3,0) in data services

Hi All,
I want to convert from decimal (5, 2) to decimal (3,0) in data services.
if anybody knows please let me know with syntax.

https://scn.sap.com/community/data-services/blog/2013/06/12/conversion-functions-in-bods-with-examplespart3
https://scn.sap.com/community/data-services/blog/2013/06/12/conversion-function-in-bods-with-examplespart3

Conversion from DEC forms on VAX to Forms5/6i

Hi ,
The requirement is to migrate around 140 DEC forms on VAX platform to Oracle Forms. Is there any tool which does the same. If so we have to consider the feasibility of tool based approach compared to manual development of the forms.
Even after conversion, the application will be running on character mode screens only. Some more people who have been working on this found a way to parse the IFDL files (the programs for DEC forms) to get details in ASCII format. This can give some information regarding the fields on forms, validations, etc. But this has to be in a format acceptable for Oracle Forms. Maybe, the feature of converting from text to binary (FMT to FMB) in Oracle forms can be used to generate the forms based on the details got from DEC forms. For this we need to understand thoroughly the format for FMT acceptable for character based forms. Based on this the feasibility to convert the IFDL details to FMT using a tool can be analyzed.
If anyone is having some idea to solve my problem then it would be a great help to me.
Regds
Pattnaik
null

The documents can be found on Oracle Technology Network -> Documentation -> Developer Suite -> Forms Developer.
http://otn.oracle.com/docs/products/forms/content.html
Hope that helps.

Problem in price conversion from INR to USD- Urgent

Dear All,
In the export sales scenario, we are having the contract with customer in INR and based on that value only the excise invoice should be raised. After 2-3 days commercial invoice is to be raised based on the exchange rate applicable on that date.
I have created sales order in INR, did proforma invoice based on order then delivery document & then excise invoice based on proforma order. Then to raise the commercial invoice, i go to change mode of order to change the currency from INR to USD. The conversion from INR to USD is not happening correctly, it is showing the lesser value than the actual value.
I have maintained exchange rate type as BLB under CIN company code settings & then assigned same in sales data of customer master. The exchange rate is also maintained in OB08 for M as well as BLB type but still the conversion is not happening correctly.
Can anybody please suggest me the cause & solution for this urgently.
Thanks & Regards,
Antima

Hi
When you change the copy control settings it will consider the exchange rate that is maintained at the time of billing.
i.e. if you have order of a previous day and billing of some other day then in that case if the exchange rate is changing on the billing date then it will consider the exchange rate of the billing date.
Hence when you are creating the billing document check the exchange rate getting picked (Whether it is on the billing date or order date).
I didnt get your other problem. Do you want to change the decimal places in the Currency? (You are in big trouble. If that is so). The settings for the same is available in customising SAP Netweaver > General Settings > Currencies > Set Decimal Places.
BE EXTREMELY CAREFUL BEFORE USING THIS.
Please clarify your doubt if that is not the case.
Regards
Sunil

Characterset conversion from US7ASCII to WE8ISO5589P1

Hi,
I need to do a Character set conversion from US7ASCII to WE8ISO5589P1 on a 10g database. I need to make the proper analysis before doing this conversion. Kindly let me know of any links/urls/metalink note ids where i can find relevant docmentation and understand on this so that i can continue with the conversion.
Regards,
Amby.

Start here:
http://www.oracle.com/technology/tech/globalization/pdf/TWP_Character_Set_Migration_Best_Practices_10gR2.pdf
Also, consider migrating to WE8MSWIN1252 in place of WE8ISO8859P1. If you have Windows clients, then WE8MSWIN1252 should be used anyway. Even if you do not have Windows clients, WE8MSWIN1252 is a binary superset of WE8ISO8859P1 and can hold all WE8ISO8859P1 codes + ca. 15 characters more. It is better to use it in case Windows clients are used in future.
-- Sergiusz

Sync old iMessage conversations from iPhone to new iPad & Mac?

I have had my iPhone for a couple years now, and have accumulated a fairly large amount of iMessage conversations from various people. A few days ago, I purchased my first iPad and also updated my Mac to Mountain Lion. By doing so, I now have access to iMessage on three devices in total, whereas before I only had one.
I have managed to setup my devices so that all new iMessages I send and receive are being synced between them. However, is it possible to sync my old iMessage conversations from my iPhone back onto my iPad and Mac?
I would like to do so in order to keep a full record of the past conversations I have had with my contacts.
I have done a bit of research before posting, but the only related topics I found werehttps://discussions.apple.com/message/19095937 andhttps://discussions.apple.com/message/17818920. The former was left unresolved, whereas the latter describes a solution which I am unable to reproduce.
Could anyone shed some light on this for me?

Hi,
For me this was very early on in my Mountain Lion days.
I would now say that you cannot sync iMessages from an iOS device that were sent before your linked any Apple ID with the iPhone Number or added the Mac to the use of the Apple ID.
At the point at which and Apple ID is used on both an iPad and the Mac version of Messages becomes it's "Start date"
The same can be said for adding an Apple ID to an iPhone and the Mac.
On the Mac all messages can be saved if you wish.
This are in the .ichat format which you can send to Mac Buddies and then can open them and read them as if they were the chat (i.e they display as "chats').
There appears to be no way in iTunes to access the iMessages (or SMS ones) on the iPhone.
Someone who knows more about the iOS may be able to tell you if they are accessible another way.
8:52 PM Friday; May 24, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IMessage won't start conversation from Mac

Hey everyone,
Iv'e been looking for a solution online for this problem iv'e been having, but i couldn't find answers anywhere.
The problem is that for some reason, i can't start a conversation from my mac when trying to send new messages. when i send those messages from my iphone it works, and then i can continue the conversation from my mac.
also, iv'e noticed that it takes a lot of time for messages to "sync" itself with my conversations that i started on my iphone. is there any way to "refresh" imessage (like on mail for example...)???
i verified that my accounts on both devices are the same, that i have the same settings, but still, nothing works.
anyone is having the same problems?? anyone has a solution...?
Thanks,
Tal.

Hi,
So, in Messages main window you have New Message at the top left.
You are entering your Contacts Name in the "To" field or using the Blue + icon > Contacts and selecting the contact.
The name is turning Blue ?
The Text entry field at the bottom also reads iMessage ?
If the name is not Blue then carefully click the downward arrow head at the end of the name.
Select the active iMessage option (highlighted with blue Speech bubble)
Does the name go Blue now ?
I tried testing with my iMessage Account logged out and the setting in the General Section set to Allow IMs and iMessages to "Wake" the app but this did not start the iMessage account when iMessaging from the iPhone
It was only a one off test with the app open but the account logged out which seemed closest to what you describe.
9:26 PM Thursday; February 14, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view. Also, when I go to enter a new event in google calendar, I now have to click the cursor in the box to type the event (it used to let me just start typing).

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?

I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

How can I print a text message conversation from my iPhone? Not using screenshots.

How can I print a text message conversation from my iPhone? Not using screenshots. It's around 500 messages so screenshots is not a option.

Yes, you can delete from iphone:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
It is covered in the manual.
Page 172:
"Delete a podcast: In the Podcasts list in iPod, swipe left or right over the podcast, then
tap Delete. "

Conversion from decimal to binary!

Similar Messages

Maybe you are looking for