Conversion: Remove first 4 characters and then ParseINT.

Hi,
I'm having problems loading a hierarchy for 0profit_center. 0Profit_center is in BW compounded with 0co_Area(1000)+0profit_center.
So each hierachy node AND member has "1000" in front. Hierarchy nodes (parents) doesn't have leading zeroes in front, but members (profitcenters) has leading zeroes in front.
Example
Hierarchy parent:
Nodename= 1000TOTAL
Hierarchy children under 1000TOTAL
Nodename=1000000PROFIT1
Nodename=100000PROFIT11
So first i need to remove the 1000 infront, and then remove leading zeroes. Unfortunately, my nodename length is variable...
So the formula would be like this
convert.to.internal(substring starting position 5 until length of my nodename)
I've added the following in my conversion file, but it fails..
js:parseInt((%external%.substring(5,(%external%.length))))
Any ideas or suggestions ?
Thank you,
Joergen

Hello,
this was a simple solution (workaround), but it worked.
The full solution was the following:
1) First load the profitcenter masterdata (NOT hierarchy) - as external format. When loading from BW to BPC - profitcenter was not compounded, but alpha (leading zeroes). Here I don't need suppresscharacter in transformation
2) Then I load the hierarchy node (and choose a "nonsense" filter on profitcenter and mark the field use both filter on hierarchy and dimension member. Here I need suppresscharacter in transformation
3) Then I can load the hierachy. Here I need suppresscharacter in transformation.
It works now.
Though would wish there were some better/more informative SAP documentation of the JS script options!
Regards
Joergen

Similar Messages

TS1717 I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?

I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I t

When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset

Hi! I have the same problem when I use my headphones .
iPhone 4s England, iOS 6.1.2

How to remove xcode 4.1 and then install xcode 3.2.6?

how to remove xcode 4.1 and then install xcode 3.2.6?

Just an FYI I had xcode 3.2 installed on my snow leopard system and have today just installed Lion and I just cleaned and rebuilt an App I had developed prior to the Lion install to test to see if it would work. I was told it would but wanted to make sure and it successfully rebuilt and works in the simulator.
My issue is a bit different I need to install 4.1 WITHOUT corrupting my 3.2 installation as I may have to go back to rebuild a 3.2 App as we had a fairly unique setup for our xcode. The problem as I see it currently is I do not know how LION installs things in LION xcode is an App downloaded from the App store but I need to be able to download to something other than the default directories and I am not sure if I have that option in LION when installing an App(xcode) from the App Store

[svn] 4233: When an FxComponent is removed from the stage and then re-added , we no longer reload the associated Skin unless it is absolutely necessary .

Revision: 4233
Author: [email protected]
Date: 2008-12-04 12:15:28 -0800 (Thu, 04 Dec 2008)
Log Message:
When an FxComponent is removed from the stage and then re-added, we no longer reload the associated Skin unless it is absolutely necessary.
Bug Notes: None
QE Notes: None
Doc Notes: None
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/baseClasses/FxComponent.as

please let me know the linksys device model number you are using ..

I downloaded some apps for my ipho in the apptrackr site, the apps are shown in my itunes library but when i try to sync those apps at first it works and then it says an error occur (0xE8008001). How can I sync them without the error?

I downloaded some apps for my ipho in the apptrackr site, the apps are shown in my itunes library but when i try to sync those apps at first it works and then it says an error occured (0xE8008001). How can I sync them without the error?

If your phone is jailbroken, we can't help you, as already stated.
If you're new to this and you're trying to download apps to put on your phone and it is NOT jailbroken, you can't do that.
You must go through the iTunes app store.

CSM 4.0.1 is removing ACS Server password and then cannot add a new

Hi,
We just wanted to use CSM 4.0.1 to change ACS Server keyword on a FWSM 3.2(5) but in the transcript I see how he removes the key and then the next statement is to add a 127.0.0.1 ACS Server that I have never defined and that failes because the connection is lost.
Can CSM be used to change the ACS keyword and not loose the connection before changing it? The product allows such a change and does not stop albeit it should now that this is unsuccessful.
Here is the transcript!
Line# 2. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): no snmp-server host fwsm-admin-context xxxx poll community comm1
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 3. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): aaa-server aaa-central (fwsm-admin-context) host xxxx
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 4. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): no key oldkey
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 5. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): exit
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 6. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): no logging host fwsm-admin-context xxxx
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 7. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): ssh timeout 30
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 8. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): ssh version 2
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 9. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): logging buffer-size 1048576
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 10. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): no logging debug-trace
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 11. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): logging trap informational
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 12. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): logging asdm debugging
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 13. (SUCCESS) Sent (Thu Dec 16 16:22:13 CET 2010): logging buffered debugging
Received (Thu Dec 16 16:22:14 CET 2010):
Line# 14. (ERROR) Sent (Thu Dec 16 16:22:13 CET 2010): aaa-server aaa-central host 127.0.0.1
Received (Thu Dec 16 16:22:14 CET 2010): ERROR: Interface "(inside)" does not exist. Please specify a valid interface name for this server
! COMMENT: Device reported error here and stopped accepting further commands
! COMMENT: BULK END
Line# 15. (ERROR) Sent (Thu Dec 16 16:22:14 CET 2010): https://xxxx/config?context=admin Received (Thu Dec 16 16:22:14 CET 2010): 24300 : Login failed
Caused by: Authentication failed on device [193.47.16.28]. Check the credentials.
Error: Server returned HTTP response code: 401 for URL: https://xxxx/config?context=admin
I think there are multiple problems, first it removes the key but does not add one and then it wants to add 127.0.0.1 to it and does not use an interface?

I would say that it it the interface problem but not that it had no interface but it had another interface.
The whole interface story is somewhat stupefying for me.
What I wanted to do is to use a single AAA Server definition for all my contexts on a FWSM, due to multiple imports in the beginning I ended up having 40 or so in the objects.
Each interface that we have on a context has a different name and it looks like CSM has a problem with this. We have tried to use interface with wildcards, but you cannot specify something like *context* or *vlan*. For us *context* is inside and *vlan* is outside.
This verification of the AAA Server should be done before trying to deploy and then not having access. Luckily all our contexts had their own AAA connection setup, so I could make changes. Because we have not used the local use for more than 3 years and had 3 weeks to search it. We almost rebooted the FWSM this Sunday (using a maintenance window) but found the password last thursday.

ISE first authorization sucess and then fail (MAB)

Hi,
Using ISE 1.1.1 and Switch 3650 12.2(55)SE6.
I have a client (computer) that should be authenticated with MAB and then the switch port should be asigned a DACL and VLAN 90. I do get
"Authorization succeeded" but directly after it fails and I can't figure out why. ISE only shows the successful authentication under "Live Authenticaions".
As you can se from the log below 802.1x fails, as it should, and then MAB succeed, asigns the VLAN and then fails:
0002SWC002(config)#int fa0/13
0002SWC002(config-if)#shut
0002SWC002(config-if)#
Jan 7 13:26:59.640: %LINK-5-CHANGED: Interface FastEthernet0/13, changed state to administratively down
Jan 7 13:27:00.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state to down
0002SWC002(config-if)#no shut
0002SWC002(config-if)#
Jan 7 13:27:19.689: %LINK-3-UPDOWN: Interface FastEthernet0/13, changed state to down
Jan 7 13:27:22.063: %LINK-3-UPDOWN: Interface FastEthernet0/13, changed state to up
Jan 7 13:27:22.776: %AUTHMGR-5-START: Starting 'dot1x' for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC00000
020D7C192D1
Jan 7 13:27:23.070: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state to up
Jan 7 13:27:51.054: %DOT1X-5-FAIL: Authentication failed for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID
Jan 7 13:27:51.054: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (f04d.a223.8f43) on Interface Fa
0/13 AuditSessionID 0A0005FC00000020D7C192D1
Jan 7 13:27:51.054: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0
A0005FC00000020D7C192D1
Jan 7 13:27:51.054: %AUTHMGR-5-START: Starting 'mab' for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC0000002
0D7C192D1
Jan 7 13:27:51.088: %MAB-5-SUCCESS: Authentication successful for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005
FC00000020D7C192D1
Jan 7 13:27:51.088: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC00000020D7C192D1
Jan 7 13:27:51.088: %AUTHMGR-5-VLANASSIGN: VLAN 90 assigned to Interface Fa0/13 AuditSessionID 0A0005FC00000020D7C192D1
Jan 7 13:27:51.096: %EPM-6-POLICY_REQ: IP 0.0.0.0| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000020D7C192D1| AUTHTYPE DOT1X| EVENT APPLY
Jan 7 13:27:51.096: %EPM-6-IPEVENT: IP 0.0.0.0| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000020D7C192D1| AUTHTYPE DOT1X| EVENT
IP-WAIT
Jan 7 13:27:51.255: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A00
05FC00000020D7C192D1
Jan 7 13:27:52.027: %EPM-6-IPEVENT: IP 10.90.5.1| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000020D7C192D1| AUTHTYPE DOT1X| EVENT IP-ASSIGNMENTReplacing duplicate ACE entry for host 10.90.5.1
Jan 7 13:27:52.036: %AUTHMGR-5-FAIL: Authorization failed for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC00
000020D7C192D1
Jan 7 13:27:52.036: %EPM-6-POLICY_REQ: IP 10.90.5.1| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000020D7C192D1| AUTHTYPE DOT1X| EVENT REMOVE
After this the proces starts over again.
This is the switch port config:
interface FastEthernet0/13
description VoIP/Data
switchport mode access
switchport voice vlan 20
switchport port-security
switchport port-security violation restrict
ip access-group ACL-ALLOW in
srr-queue bandwidth share 1 70 25 5
srr-queue bandwidth shape 3 0 0 0
priority-queue out
authentication event fail action next-method
authentication event server dead action authorize voice
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
mab
snmp trap mac-notification change added
no snmp trap link-status
dot1x pae authenticator
dot1x timeout tx-period 10
storm-control broadcast level 2.00 1.00
storm-control multicast level 2.00 1.00
storm-control action shutdown
storm-control action trap
spanning-tree portfast
service-policy input ax-qos_butnet
ip dhcp snooping limit rate 5
end
Is there a problem with the client (computer) or in ISE/Switch?

Hi Tarik,
First off; thank you for helping me troubleshoot this problem.
I think the "IP-" part of "IP-ACL-IWMAC" is beeing added automaticly (in the switch maby?). I see this behaviour on other dACL too. I did not change the name of the ACL.
You seem to have a valid theory about the icmp statement. I changed it to "permit icmp any any" and it seems to work. But I can't explain why this is happening.
When I look at the debugs I see this difference
With the original ACL I get this:
%EPM-6-POLICY_REQ: IP 0.0.0.0| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000053E70733F4| AUTHTYPE DOT1X| EVENT APPLYReplacing duplicate ACE entry for host 10.90.5.1
%EPM-6-IPEVENT: IP 10.90.5.1| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000053E70733F4| AUTHTYPE DOT1X| EVENT IP-RELEASE
%EPM-6-IPEVENT: IP 10.90.5.1| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000053E70733F4| AUTHTYPE DOT1X| EVENT IP-WAIT
%AUTHMGR-5-FAIL: Authorization failed for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC00000053E70733F4
When using "permit icmp any any" i get this:
%EPM-6-POLICY_REQ: IP 0.0.0.0| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000055E70B8E7D| AUTHTYPE DOT1X| EVENT APPLY
%EPM-6-AAA: POLICY xACSACLx-IP-ACL-IWMAC-50eea905| EVENT DOWNLOAD-REQUEST
I tried googeling but can't find what "Replacing duplicate ACE entry for host xxx" means.
I have added debugs in attachment.
device1_orig_acl - the none working device with original ACL
device1_any_any - the none working device with permit icmp any any
working_device_orig_acl - the device that works with the original ACL
Do you have an answer to why this is happening?
Regards,
Philip

Remove first 30 characters from get-content

hello
i have a one liner which reads a file and filter it based on my criteria. the output is very lengthy. i need to remove the first 35 characters of that in order to have a clear result with no unwanted information
Get-Content D:\netlogon.bak | Select-String -Pattern "CHI-*"
after I filter based on pattern, i want to remove the first 35 charaters. how can i do this?
thank you

Get-ContentD:\netlogon.bak
| Select-String
-Pattern
"CHI-*" | %{$_.SubString(35,$_.Length-35)}
\_(ツ)_/

Data in Health first got doubled and then does not show anything at all

Hello together,
i'm experiencing issues with the health app.
Until yesterday all the data, like distance, steps, weight, was perfectly right collected and shown within health.
Yesterday i went for a run and installed Runtastic and 'Runtastic Me' afterwards. First of all i checked, that both new apps were not allowed to write distance or steps, but to read them.
Nevertheless the distance of my run got doubled in health. Since today health does not show any data at all, but Withings (which i had installed before and worked fine) an Runtastic Me show the data right. In health i cannot select Iphone 6 as data source, which i was able to do before.
How can i fix this?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") 
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r32
* Java Plug-in 1.6.0_03 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Lightroom mobile sync "hangs" - I am trying to sync several small LR collections from my desktop computer. The first collection syncs, and then Lightroom syncing seems to hang. It shows "Syncing 150 photos" in top left, but never progresses even after c

I am using Lightroom 5.5 on OS X. I have created several small collections with about 180 images and I am trying to sync them via Lightroom mobile for later iPad access. The first collection syncs properly, and then Lightroom syncing seems to hang. The label in the upper right shows "Syncing 150 photos" but does not count down. Opening and closing LR does not restart the process.

PROBLEM STILL EXISTS...
I spoke to soon! I tried adding a couple of more collections to sync. Lightroom shows "Syncing 814" photos on upper left, but never apparently syncs any. If I exit Lightroom it notifies me there are 814 images to sync. When I reopen it seems to pick up and stall where it left off. These new collections are not posting - this is the same problem as before.
I am pretty sure there is a serious bug in Lightroom here. I encourage support to contact me.

HT1725 I have two songs Free and Keep Me In Mind and they play the first 8 seconds and then go to the next song. I can't download them again. What do I do?

I have purchased songs and they only play the first 8 seconds and go to the next song. I can't download it again, Itunes won't let me. How do I get the songs?

Try clicking on the Windows menu item then select downloads.

First the text and then the icon in JButton

Hi,
I want to create a button with a String followed by an icon. When I do
JButton aButton = new JButton("Select", new MetalComboBoxIcon());
It puts the icon first and then the string. I want to a create a button that looks like JComboBox.
How would I do this?
thx.

setHorizontalTextPosition(SwingConstants.LEFT).
Check out http://java.sun.com/j2se/1.3/docs/api/javax/swing/AbstractButton.html#setHorizontalTextPosition(int).
Good luck,
-- Scott

How can pine users access their iPlanet account without identifying first to login, and then when they run pine?

At University we have just completed migration to iPlanet Messaging Server 5.2. Users of UNIX and pine now have to identify twice to get email. As stated in the question, they have to login to their shell, and then pine forces another login. Each additional time they run pine to check email it requires a new login.
Is there any way to get rid of the additional authorizations required to read email after someone is successfully authenticated to our own student/faculty servers? Perhaps adding some sort of Kerberos ticket system?
Thank You

At University we have just completed migration to iPlanet Messaging Server 5.2. Users of UNIX and pine now have to identify twice to get email. As stated in the question, they have to login to their shell, and then pine forces another login. Each additional time they run pine to check email it requires a new login.
Is there any way to get rid of the additional authorizations required to read email after someone is successfully authenticated to our own student/faculty servers? Perhaps adding some sort of Kerberos ticket system?
Thank You

My iTunes does not recognize disc burner. I read through answers on the web page and followed the instructions for removing the GEAR drivers and then reinstalled iTunes. It still says there is no disc burner or software installed. Can anyone help?

These are my diagnostics:
Microsoft Windows 7 x64 Service Pack 1 (Build 7601)
IBM 8114W2C
iTunes 10.5.2.11
QuickTime 7.7.1
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 00CEA7FC09BD5910
Current user is not an administrator.
The current local date and time is 2012-01-17 16:41:32.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel Corporation, Intel(R) 82945G Express Chipset Family
Intel Corporation, Intel(R) 82945G Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: b7d08a26c0b28e9f17d324690b8df8ca
iPodService 10.5.2.11 (x64) is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
D: LITE-ON DVD SOHD-16P9S, Rev FUS5
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 47:21 on CDROM-XA media.
Track 1, start time 00:02:00
Get drive speed succeeded.

Couple of things I spotted right off ... diagnostics still don't show me as an administrator but I told it run as administrator. When it asked to insert a prerecorded CD and then choose which drive to use, I have no drives in the menu to choose from but yesterday I had 2 and shows no external plug-ins installed. Hmmm. Fresh diagnostics below ...
Microsoft Windows 7 x64 Service Pack 1 (Build 7601)
IBM 8114W2C
iTunes 10.5.2.11
QuickTime 7.7.1
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.3.0
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 00D4AB7C099BA9C8
Current user is not an administrator.
The current local date and time is 2012-01-18 19:18:55.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel Corporation, Intel(R) 82945G Express Chipset Family
Intel Corporation, Intel(R) 82945G Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: b7d08a26c0b28e9f17d324690b8df8ca
iPodService 10.5.2.11 (x64) is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

Conversion: Remove first 4 characters and then ParseINT.

Similar Messages

Maybe you are looking for