COPA document generated with Old Plant..

Hi Team,
Our Client has migrated from old plant code 1 to new plant code 2.
When the Internal Oder/WBS settled, two COPA documents were created. One COPA Document with Record type B (Direct postings from FI/MM) with new plant code 1 and another COPA document with Record type C (Project/order settlement) with old plant code 2.
However, I have gone through the material master, settlement rules and Internal Order/WBS to verify for the plant and it was mentioned with new plant code 2 only, And I dont see the derivation rule for the plant also.,
Why the COPA document is been created with old plant code instead of new plant. And this issue we are facing with only for Order/WBS settlement for the record type C.
Please let me know your inputs
Thanks in Advance
Edited by: pathurivenki on Feb 12, 2012 8:47 PM

Hi All,
To Answer my question above, The COPA Realignment wasn't done after changes to new plants. Whenver the changes has been made at controlling orgn level, the realignment needs to do.
Closing this thread..
Thanks,
Venkat Pathuri

Similar Messages

COPA document generated , but value field 'Revenue' was missing.

Hi COPA-Experts:
I got a problem when tranferring 'Billing document to COPA'.
COPA document was generated but some value fields missing, like 'Revenue'
i checked it by T-code 'KE4ST'(simulate), everything is OK in that session.
then I checked the pricing procedure, the price condition type was assigned by 'KE4I'
Cost element was also checked , revenue account have a CE category '11',
ULINE
when i changed 'account assignment group' in Material Master,
(by VKOA, another G/L account assigned to account assignment group )
everything was OK both in COPA and simulating.
so i guess, account assignment group(material) is revelant to COPA value fields?
how did it do that?

Resolved.
Other one had written some code in user exit (SMOD "COPA0002"),
update some value fields by account assignment group for material.
then the user exit was assigned in KE4U.
so , that's the answer

Ar29n - no fi document generated (with aa document generation, amount 0)

Hello,
After customizing the revaluation area (APC: all values allowed, Depreciation all values allowed, reevaluation allowed), the reevaluation measures (one for writing back depreciation and one for opening of depreciation areas) and the transaction groups and types, I have the following problem:
- I run the transaction AR29N
- I complete the asset, the new amount, the rev measure and the transaction type
- I have a confirmation message that one document is created (AA document) but the amount is 0 and no financial document is generated, as it should be.
What I expected to see (because I customized that before in a different system): debit accumulated depr, credit asset.
Any ideas?
Thanks

When you are doing mass revaluation of asset, SAP does not have transaction code except AR29N, which only supports up to 5000 aseets in one go.
We usually used AB01 or ABSO and the specially created transaction type for this purpose. Obviously, the transaction type is restricted to post in a particular depreciation area.
Therefore, a program can be developed, as in AB01 you only put either incremental or decremental values of the asset. Through this program the revaluation figures can be uploaded. Before developing this program, you may first go and post the values manually and see the accounting effect.

2 accounting documents generated with MIRO

Hi all,
A customer made a purchase order, receipted it (MIGO) and entered incoming invoice (MIRO). During the incoming invoice, sap generated 2 accounting documents. I explain one of them, taking expense and accounts of stokcs; but the other generated 0,01EUR on a material account in return of an acccount of inventory change.
I don't understand why i have this second accouting document.
Have you already solved this kind of problem?
Thanks in advance.
Regards.
Aurélie.

Hi Aurélie,
This can be caused by some cases:
-> Manual/total-based invoice reduction : See column "CorrectionID"
If an invoice is reduced, a credit memo is posted for the amount of the reduction in a separate accounting document.
-> You post an invoice relating to a PO without account assignment to the previous period (or you post directly to the material).The material is subject to moving average price control. In the previous period you have stock coverage; in the current period there is undercoverage (you are short of stock). An additional price change document is posted in the current period.
-> Cross-company-code invoice In the case of cross-company-code invoices, a separate accounting document is posted for each company code.
Hoipe this helps
Tarek

COPA Document with different exchange rate

Hi
We have created a Sales Order in 2007.
Now in 2008 we have raised credit request for this order. The accounting doc generated correctly and currency translated as per the exchange rate maintained in the table as on today.
But the copa document generated with the exchange rate of 2007.
Can you please let us know is it the correcy way of behaviour or the COPA doc also should generate with current date exchange rate.
Thanks and Regards
RS

Hi Ram
Thanks for your reply.
This is my scenario.
The company code currency is THB.
The second local cuurency is USD.
The Operating currency is USD.
Reporting Currency is USD.
We have created a Sales order in December 2007 for currency THB. The billing document and accounting document also generated in the same year. The exchange rates are picked correctly as per the exchange rate table.
The exchange rate is @42. The COPA document also created with exchange rate @42.
Now in the month of January a credit note created against the order. The accounting doc generated @32 as per the exchange rate tables. But the COPA document generated with exchange rate @42.
This is happening only for the credit notes.
Can you please let us know is this standard behaviour or something wrong with customization.
Best Regards
RS

Internal credit memo generating COPA document

Hi,
We have created one intercompany billing document(IV) and see that there are no COPA
document generated. But when we did the Internal credit memo(IG) for the same, it is
generating COPA document.
When intercompagny invoice(IV) is NOT PASSED THROUGH PA, then intercompany return(IG) also
SHOULD NEITHER PASS THROUGH PA.
Also i found that for Billing document type IV, all the value fields are showing are reset
in KE4W T.code. So is it related to this or anything to do with this.
Pls suggest
Regards
Edited by: R J on May 15, 2009 11:35 AM

Anybody update on this or any suggestion.

COPA document is not generating for import sales billing document.

Hi Gurus,
At the time of billing i got an error that condition type is not assigned to COPA. I assigned the condition type in KE4I and the entry posted but no COPA document generated.
Why the COPA document not generated?
Is there any link between billing type and COPA? if yes, then where we link the same to copa!
Note:- COPA document is generating for other billing documents.
What are the criterias for system to determine the generation of COPA documents?
It is urgent.
Regards,
Ramakanta

Hi ,
I am really very much appreciate your cooperation for the issue.
When i try the same through KE4S in test run system is showing the below lines.....
Number of billing documents read:                        1
Number of line items to be transferred:                  0
No. of billing doc. items already transferred:           0
Number of billing docs with errors:                      0
Note:- Number of line items to be transfered 0 then there is nothing to transfer to COPA.
Please suggest.

COPA Document not generating from MM postings

Hi,
Can anybody help me figure out my problem in COPA? I have set up the flow of actual values for direct postings from FI/MM. When I made a test posting via F-02 for GL account Raw Material Consumption, I could see that a COPA document is being generated and it flows correctly to a customised KE30 I have created. But when I posted a test transaction via MIGO for the same GL account, the COPA document is not being generated. Any advice is highly appreciated.
Regards,
Thess

Hi Thess,
you are missing some thing very important. That is the value flows in Product Costing and COPA.
When you post material consumption to Production Order, there is not COPA Document generated. because, Production Order is the real cost object and there is no need to post another cost object say Profitablity segment.
When the postings to COPA will happen?
1. When sales are made and delivery happend. Through SD conditions, the value of Sales and Cost of sales and other direct sales cost from SD condition types will flow to COPA
2. When you settle production Order. The variances will get settled to COPA
3. When you settle Sale Order (when sale Order is the cost object). the values will flow to COPA
4. Direct posting from FI to COPA. Say Subsequent customer discounts rebates etc
5. MM automatic postings using OKB9 settings. automatic postings like inventory differences etc
6. there are few more cost object from where the settlement can happen to COPA like Project Systems, Service Orders etc
In you case, just consumption posting to Production order will not have any COPA impact.
please let me know if you need futher clarifications
Best Regards
Surya

Depreciation posted,but no accounting document generated

Dear Experts,
i have run the depreciation, it is sowing in AW01N posted, but no accounting document generated with document type AF.
Please Suggest!!!!
Many thanks
Naru

Hi Naru,
I'm not sure what version of SAP you are on however you could try and identify the documents posted from the depreciation run from transaction AFBP.

COPA document not generated when Post Goods Issue is reversed.

Hello Friends,
WE uses Stock Transport Order in two steps for transfering Stock from one plant to another. We have defined a Condition type FRB1 to capture the Freight cost involved in the stock transfer.
When the Post goods issue is done for the Stock Transport Order. following Accounting documents are generated.
Accounting
Profit Center
COPA
Spec. Purpose Ledger
Controlling Document
Material Ledger document.
But When the Post goods issue is reversed through transaction code VL09 all the above documents are generated except for COPA document. Though in controlling document it shows the object type hit is REO i.e profitability Analysis
For further information we have mapped cost element (600150) with Value field in PA transfer structure (Direct assignment from FI and MM. Movement type used for PGI are 641 & 642.
Thank you

Dear Colleagues
I thank all those who put in thier time and efforts for possible solution for my problem. But I could resolve this issue with help from SAP.
Basically in costing based COPA the system does not post the cost of goods sold to COPA during goods issue but it is done at the time of posting the invoice since the system wants to see the revenues and the COGS values together.
Since the system posts the COGS into COPA at the time of invoice posting, you will appreciate that if this is also done during goods
issue then you will have duplicate entries in your COPA (i.e. the COGS will be doubled).
If in transaction VL01N/VL02N a costing-based line item would be posted, the costs would be double in CO-PA (the billing and goods issue). For this reason, no costing based line items will be created in the standard R/3 system for transaction VL01N/VL02N.
If for some reason you still wish to post the COGS to COPA during goods issue you have to do the same thro a modification of the system.In your case you have applied note 214381 for the same. Please note here that movement type '641' is used as an example. For other movement types you will need to code accordingly.
as per note 337488 point 2. the changes of note 214381 were not required in our case. Therefore we reverted these changes in LKEIIF01 and added the relevant coding for movement type 642 in function COPA_DOCUMENT_CHECK as per note 337488 point 2.
Looking forward for your continued support
Regards
Umesh Gothankar

Issue with creation of COPA document

Hi
Can you please look into the following scenario and provide inputs on the issue
Single Finished Material Number in SAP for both plant
Plant 1 (Co Code 1000)u2013 Trading Material
Plant2 u2013Co Code 2000) Manufactures Material
Plant 2 manufacture Material and sell it to plant 1 and plant 1 sell it to third party. How can we create the COPA document at the time of billing (OTC) for plant 1
We do nt want to run the Std Cost Estimate for Plant 1.
thanks in advance
kind regards
sap student

Hi
If this scenario is applicable always i.e. Plant 2 will always make and Plant 1 will always sell, then you dont need to release cost estimate in Plant 1
1. Maintain Price Control V in Plant 1 so that it will accet the Std Price of Plant 2 whenever you do the GR
2. Create a Costing Key in Ke40 and specify the cost estimate Plant = PLANT 2... DO NOT check the radio button "use line item plant as cost estimate plant)... With this, whenever billing hapens from Plant 1, it will pick the Std cost of Plant 2
br, Ajay M

Third party sales COPA document is not getting generated for MIGO

Hi
Kindly help to resolve the following.
Third Party Sale Scenario
While doing to MIGO accounting document and controlling document is getting generated, but not generating COPA document.
In KEI2 and KE4IM assignments are maitained for condition type and value field.
For SD the COPA document is getting generated.
Kindly help to resolve.
Thanks n Regards
N Sathish Kumar

If you have created new GL Accounts to map the Third party scenario, the pre-requesite is that you might need to create cost elemenet with category 11 or 12.
Further only assignments are condition types assigned to value fields.
Check if the billing type is reset under TCode KE4W.

COPA document not generated though after billing and accounting generations

I have an issue with one instant.
For some reason COPA document is not generated even though billing and accounting document were created. Found no errors in simulation using KE4ST. The billing item details has all the PA segment characteristics.
COPA documents were created for entries made befor and after this particular one.
Also we have COPA documents for the product with the same customer and different customers.
Our system is 'SAP ERP Central Component 5.0'

Thanks Ajay for the quick response.
Cost element category is correctly maintained.
Condition types are mapped.
COPA is in use for more than 4 years.
Able to simulate COPA document for the Billing document without errors.
We do have COPA documents created before and after this particular transaction.
As you said raising OSS message with SAP.
Thanks

Pages 5.1 error "This document is too old. To open it, save it with Pages '09 first."

When trying to open a Pages '08 file from a MacBook Pro in Pages 5.1 on an iMac, I get thr error message, "This document is too old. To open it, save it with Pages '09 first". I cannot locate a Pages '09 to use. I can export the file from Pages '08 into a Microsoft Word Doc file and can open it then. How I do I solve the problem and open files in Pages 5.1?

It is A solution that works if you don't have too many Page files to convert, but is very poor solution if trying to move everything off of the MacBook Pro to the iMac. I don't necessarily need to open the 5 years of files, but if I need to look at something archived, I'm dead in the water.
It doesn't make sense that a Mac can open a Microsoft product but cannot open a Mac product. I can understand that a program is not forward compatibale, but almost all programs are backward compatible. This same problem appears with Numbers 3.1.
Apple needs Microsoft as a solution?

Pages 5.2 documents unsuccessfully try to open with old version 4.3

I understand that I have two version of pages, new (5.2) and old (4.3), with separate icons in my Applications folder.
The way it has been working is this:
• If I opened an document created with Pages 4, it prompted me to automatically update with Pages 5.
• Documents created with the new Pages 5 could be opened, as expected, by just double clicking. The document would pop open with Pages 5.
Now, for some reason this is happening:
• When I try to open a document created with Pages 5 by double clicking I get the message: "You need a newer version of Pages." If I right click the document I can select "open with." The window show "Pages (default) (5.2)" at the top and Pages (4.3) right below. I select "Pages (default) (5.2)" and the document opens. It seems that my comuter is using the old version of Pages as the default, even though, according to the "open with" window, Pages 5.2 is the default.
• When I open a document created with the old version, it opens using the old version and no longer prompts me to update it to the new version.
Is anyone else having this problem? Any suggestions.

Try this. Select (but don't open) a document created with the new Pages. Press Command-I. Under "Open with", select Pages 5.2. Click on "Change All".
An alternative to try is to move the old Pages app to another folder. Do not delete the old Pages - you may need it later!
Be aware that once a document is converted to the new Pages format it will not open with the old Pages (unless you specifically export it in old Pages format). I mention this because the new Pages lacks features found in the old version and this might be a problem for you.

COPA document generated with Old Plant..

Similar Messages

Maybe you are looking for