COPA value field not getting complete SD condition value

Hi Gurus,
I find a strange issue when a billing document is transferred to COPA (well basically, after a billing document is released to accounting, all the controlling docs and COPA docs are generated). The issue is, I have a SD pricing condition which has been assigned to COPA value field. I also have the transfer +/- sign checked on this value field. Now consider the following 2 scenarios:
Scenario 1: In VKOA, two different G/l accounts have been assigned to the corresponding pricing condition account key. These 2 G/L accounts have been defined as cost elements with category '12' (its related to sales deduct). and fall under the same cost element group. When a billing doc is posted to accounting and hence to COPA, I see that there is no value in the value field and the corresponding condition type. Then I ran a simulation using KE4ST and found that I have two lines with the same pricing condition type and value field but one carries a positive value and the other one carries a negative value. Then I came to a conclusion that may be these two lines are netting out and hence there is no value being posted on the value field.
Scenario 2: In VKOA, I have assigned two different G/L accounts which fall under different cost element group and one is defined as category 12 and the other as category 1. This time I see that only 1 line of value field is brought into COPA corresponding to the pricing condition and hence I see a value in COPA value field. But business doesn't want to go with scenario 2 as they don't want to use two cost elements in different cost element group. Also one is sales deduct and the other is primary cost/ cost reducing revenue. So there is a balance getting accumulated in the primary cost/cost reducing revenue element.
How do I resolve this issue to post a value to the COPA value field using scenario 1?  I have also tried to uncheck the transfer +/- sign but I am unable to even release a billing doc to accounting as it is giving me a error message,: "correct the value field assignment for the condition type".
Please help me !!
Regards,
Sony

Version of SAP?

Similar Messages

  • Total Settlement Value field  not getting populated in IW38  Transaction

    Dear all PMCS group Members,
    I have a list of  Maintenance Orders on which  Actual Costs are posted and also periodic settlements done before TECO.  When i list these Maintenance Orders in IW38 transaction the system is bringing in the values in  Total Actual Costs column  but  not the Settlement values in Total settlement column which i need to cross check before i do mass TECO. 
    Your help will be greatly appreciated.
    regards,
    rajaraman.

    Dear Rajaraman,
    You can see the Total Settlement values by using tcode IW38.
    ---> Goto IW38
    ---> Execute the Report for selected Orders
    ---> Click on the Current Tab or Press CTRL+F8
    ---> Select the Column of Total Settlements and Actual Settlements
    ---> Click on the Save Button... it will ask you to enter the Layout... Enter it and hit Enter
    Your Required Fields will be Displayed.
    Regards
    BK

  • Replaced value is not getting relected in IDOC segment field

    Hi,
    Need your help for the below issue.
    I am replacing the PO # with Delivery Doc # . But the replaced value is not getting reflected in the IDOC segment field(e1bp2017_gm_item_create-po_number.).
    Function Module  which I am using is IDOC_INPUT_MBGMCR as a copy.
    Here is my code given below:
    SELECT
                SINGLE vbeln
                  INTO lx_vbeln
                  FROM lips
                 WHERE vgbel EQ e1bp2017_gm_item_create-po_number.
    Move lx_vbeln TO e1bp2017_gm_item_create-po_number.
    MOVE-CORRESPONDING e1bp2017_gm_item_create
                   TO goodsmvt_item.
    Then this is passed as  TABLE in "BAPI_GOODSMVT_CREATE".
    Please do the needful.

    Hi Dheepa,
    Check it in debug whether the filed is empty or having po#, when ur code is executed for the replacement. if it is empty, po# is populated after ur code. in this case you need to write the code in suitable place.
    Reddy

  • STDMES field in EDI _DC40  value is not getting reflected in SAP R/3

    Hi All,
    We have a EDI to IDOC scenario.
    In message mapping we are hardcoding EDI_DC40\STDMES = 812 in message mapping and in sxmb_moni in PI we can see this value getting populated in xml message but at SAP end in we02 it is blank.
    Value is not getting populated in SAP.
    Could you please provide inputs on this?
    Thanks in Advance
    Best Regards,
    Harleen Kaur Chadha

    Hi Harleen,
    Please check Note  SAP Note Number: 1331571 : IDoc adapter: Value STDMES is ignored
    Regards,
    Vikrant

  • XREF3 field not getting populated in BSEG table while posting MIRO

    Hi,
         I have one query in MIRO tcode.I have activated xref3 field in MIRO tcode using enhancement LMR1MF6Q.Now when i try to post document with some values in xref3 field on screen ,value is not getting populated in BSEG table.Please tell me what else needs to be done to achieve this ?
    any hint on this?
    Thanks & Regards,
    Soniya S.

    Hi,
    1.- According to SAP Note 904652 - MIRO: Different from FB60
    https://service.sap.com/sap/support/notes/904652
    MIRO is an independent Materials Management (MM) transaction that does not
    claim to be the same as the accounting transactions (such as FB60 or FB01).
    MIRO was developed to allow users to process vendor invoices within the
    context of the MM procurement processes as simply as possible.
    For this reason, among other differences, the field selection was limited
    to the absolutely necessary. For example, the following fields from the
    accounting document are not available in Transaction MIRO (this list is not
    complete):
    Reference key (BSEG-XREF1, -XREF 2, -XREF 3)
    2.- SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment
    https://service.sap.com/sap/support/notes/1156325
    Have a look at badi MRM_ITEM_CUSTFIELDS.
    This badi will create a new tab at item level in order to display the new fields.
    I haven´t used this badi so i cannot talk from experience here.
    Think twice before deciding.
    Best regards.

  • Default Value is not getting displayed in SUN ONE Ldap

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
    We need the default value to run our applicatin. Can anyone help me for this issue
    Regards,
    K. Senthil Kumar

    Hi anandkumar,
    I belive this issue can be resolved by changing the  Query proprties for the perticular field.
    Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
    __Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
    FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
    Hope this helps you!!
    Best Regards,
    Maruthi

  • While Creation Of SaleOrder Char Values are not getting saved.(V C)

    Hi SAP gurus,
    One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
    Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
    Awaiting for your valuable reply.
    Cheers,
    Kumar.S

    Kumar ,
    If you assign values in classification view or configuration profile  they will become default for the product, and it willnot be changed in sales order.
    another thing if the item category is incorrect you will not get the configuration pop up at all .
    problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
    If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
    see the result of configuration before saving the sales order , i hoep it will work for you.
    I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
    Check and revert back.
    Regards
    Ritesh

  • Quantity field not getting displayed

    Hi,
    I am using Adaptived RFC Model to get Sales Order Data from SAP. The Sales Order BAPI that i am using is
    BAPI_SALESORDER_DETAIL. I have mapped the SALESORDER table(SALESOPRDER Model node) to the TABLE UI element in my WebDynpro Application.
    The problem i am facing is that while all the fields get displayed the Quantity value is not getting displayed in the appropriate column. I have checked the mapping and everything seems to be fine.
    Also when i create a separate value node for the table and fill the value node from the model node the quantity value gets displayed then.
    Please suggest what can be the possible cause for this.
    Regards
    Sidharth
    Can you please

    Hi,
    As far as I understand you display output parameters of BAPI, so check to following things:
    1. After calling BAPI model method call invalidate on context node to update the values (e.g. outputNode.invalidaet() )
    2. Check that you dispaly output parameters and not input parameters of the table. (e.g. You have Quantity and QuantityOutput node so connect you table field to QuantityOutput)
    Hope it helps.
    Victor.

  • Excise rate and value is not getting defaulted from the purchase order

    Hi all,
    While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
    Regards
    Vishal

    Hi,
    Follow STO Process for this;
    1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
    2. Assign this vendor to Delivering plant
    Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
    3. Create internal customer with the sales area of the vendor. Go To XD01
    4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
    5. Maintain condition records for the relevant pricing condition.
    6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
    7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
    8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
    Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
    9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
    Assign the document type NB to supplying plant and receiving plant
    10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
    11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
    10. Create Delivery: VL10G
    12. Picking, PGI: VL02N
    13. Billing: VF01
    Save the document and its done
    14. J1IIN - Outgoing Excise Invoice
    15. MIGO - Goods Receipt against outbound Delivery
    16. J1IEX - Capture & Post Excise Invoice
    Rgs

  • Workflow Not getting Completed

    Dear All ,
    It is very urgent problem . I have one workflow based on FIPP . I have moved that from development to production . In development it is working very fine . BUt in production my last task is not getting completed .
    The scenario is the parked document will go through the approval process and last person will post the document . The document is getting posted But once the document is getting posted the table field WT_STAT of  table WITH_ITEM should get changed that is not happening in production . It is working very fine in development . What should be the reason . Please let me know if any thing has to be done .

    Hi,
    This looks more like a customizing for me! The table WITH_ITEM is associated with the Witholding tax of the line items in the Invoice document. I am not sure whether the customizing are the same in both the systems.
    On another hand are you using the standard workflow or a custom one? If you are using a custom one then I guess you can control this by having a terminating event "Posted" for this workitem.
    Hope this helps,
    Sudhi

  • Open Sale Order Value (FD33) not getting diminished even after closing SO?

    Hi,
    Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
    What could be the reason ?
    Pls help.
    Regrds,
    Binayak

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • Select-option value is not getting captured in at selection-screen on value

    In Selection screen , we have Select-option and  a parameter.
    Based on the values given in Select-option, the values of Parameter should get populate.
    To achieve this functionality,
    I  used  At selection u2013screen  on value request  for <parameter>  EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
    But the Select-option values are not getting captured in this event,unless u press Enter key.
    Is there any other way to achieve this functionality.
    Please Guide me.

    When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
    Jonathan
      data:
        l_repid             type syrepid.
      l_repid = sy-repid.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          dynpprog         = l_repid
          dynpnr           = '1000'
          dynprofield      = 'S_FIELD-LOW'  "Select options - low value
    * etc

  • Enhanced Datasource fields not getting displayed in Transformation

    Hi,
         Eventhough after replicating the datasource, the Enhanced Datasource fields not getting displayed in Transformation.
      Eg I have done mapping of 6 fields in transformation from datasource to DSO
    Now the datasource is enhanced with 8 fields...........The transformation is not showing the added 2 fields
    I am deleting the existing transformation.Is this the only solution?
    Kindly suggest your answers.
    Thanks,
    Sonu.

    HI,
    Deleting is not solution as it is common scnerio.
    Go to the data source in BW and in change mode check the option "transfer" for this two fields and then see if its coming or not.
    Thanks
    Ajeet

  • Stock value is not getting updated in APO system From ECC automatically

    Hi All,
    Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
    for this we are using EXIT_SAPLCSTK_001.
    I am using VL10A for delivery and VL06G for PGI
    I have also checked integration model for material and stock.
    Please help me out as it is very urgent.
    Thanks,
    Gaurav Mittal
    Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

    Hi,
    for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
    please check the same.
    if this does not help, let me know in detail the steps which you are following..
    Ram

  • Values are not getting updated in sales report

    I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
    regards,
    thooyavan

    Hi,
    Please check with the Customer and Material Statistics group in the Customer and material master respectively.
    Further check with the LIS settings (Sales Area combination with the Update group).
    Reward points if this helps you.
    Regards,
    Harsh

Maybe you are looking for