Copies of printed materal saved on printers?

I would like to discard my old Deskjet 722c, but don't know if what was printed on this printer is saved somewhere on a disk drive.  Do printers normally save a copy of what they print out? 
I actually hate to part with this printer, but it stopped working a long time ago and I've never been able to fix it.  Thanks for any help you can offer.
This question was solved.
View Solution.

The Deskjet 722 printer (as well any of the Deskjet 600, 700, 800 and 900 series printers) do not store any document information.  None of these printers have a hard drive or other storage that could retreive documents.
What is the problem with your Deskjet 722?  If you described the symptoms (as well as any error messages you see on the computer or blinking lights on the printer) I may be able to suggest some things you have not tried.  Also please mention your operating system.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Set The Secured Files, Not allow printing and saving to another location

    Dear Sir / Madam,
    Please help...
    Possible to set the security permission for share files, not allow end users to printing and saving a PDF to another location.
    Thanks,
    Alex Tai

    Hi Alex,
    Possible to set the security permission for share files, not allow end users to printing and saving a PDF to another location.
    Based on my tests, users can save the document with only Read permission, which is by design. If you don’t want users to print files, please do not give the print permissions on printers.
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • I have PSE13 on my system.  It was functioning properly and now I get these messages when I go to print:  "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You need to c

    I have PSE13 on my system, Windows 8.1, 64-bit.  It was functioning properly after installation and now I get these messages when I go to print:  "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You need to check your printer settings before printing."  and then this statement:  "Default printer could not be opened."  I have reloaded drivers for both printers and made any upgrades possible.  It was working fine before and now all of a sudden, nothing.  Would prefer to have old PSE v.12 back, it worked with no problems.

    See this thread
    My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

  • How do you split the print job across multiple printers to shorten the prin

    i
    Can any one you provide some information on below questions.
    Check printing by XML template (XML Publisher).
    1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
    2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
    I appreciate if you could give some information on above 2 questions.
    Regards,
    Ramarao.

    Probably sould just do them individually.
    How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
    http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
    About Free Apple Apps for iOS 7 compatible devices
    http://support.apple.com/kb/HT5913
     Cheers, Tom

  • I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as

    I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as a PDF. Can anyone give me some tips on how to fix this? Thanks!

    Ask in the program forums
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

  • Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

    Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
    Word, and powerpoint application are working fine.  
    Environment :  Windows 7 64-bit, MS Office 2013 64-bit
    Steps to recreate
    (i)  Create new user account and add to any group ( do not log on using this
     account)
      (ii)  runas /user:<new user account>  <fullpath>\excel.exe
       it will ask password so enter on command prompt
    (iii)  open any excel document  and click File->Print
      (iv)  verify result  (it is failing) it pop ups below error
     Error:`Microsoft Excel
     No printers are installed. To install a printer click the File tab, and then click
     Print. Click No Printers Installed, and then click Add Printer. Follow the
     instructions in the Add Printer dialog box.                                                                                                               

    Sorry for late reply i was not at work
    I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
     Probably excel behaves differently from other office applications.
     Probably it is a bug in excel
    Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
    It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

  • F4280 wireless printing windows 7 64-bit, not showing printer in "devices and printers"

    Hi,
    I am a little confused. Today I installed windows 7 64-bit on my acer 9423wsmi notebook. I installed my hp f4280 via a usb cable. It prints and scans. Now I try to install my wireless kit (came with the printer) which worked fine an vista 32-bit sp1. I looked up every driver etc. on hp.com and found the install guide for windows 7. Everything went as described and printing works even without the pc adapter. You might say what is the problem. Well I noticed the wireless (copy) isn't listed under "devices and printers". I found this a bit strange. I tried to install a printer via the windows wizard. But using the network option gives me the shared copy. And using a the usb02 virtual port to which the printer is connect yields the same result: a fully working printer but nowhere to be found in "devices and printers". I searched the internet for a solution but my search results get cluttered with support for the installation. 
    My questions:
    Is this normal on this system with these settings?
    Is there a way to let the printer appear in "devices and printers"? 
    Kind Regards 
    Carnelain

    Hi Flash,
    I still haven't fixed the problem. I assume you found this installation guide. If I follow this I still can't see the printer in "device and printers". But when I open a document (notepad, word) I can see the printer listed in the printer dialog. So I am able to print. Printer properties are a bit hard to reach but it works. I am still hoping some wizz kid from hp to come up with a solution . Keep me posted if you know something more.
    Carnelain

  • How do I set the default print margins for ALL printers in mozilla.cfg

    How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
    I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

    Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
    If you can figure out how to add the printer name, this can be used to lock the margins.

  • Is there a way to reduce the size of a final PDF created for print when saving a file?

    Is there a way to reduce the size of a final PDF created for print when saving in any software (especially illustrator)? I don't want any quality to decrease at the same time. Thanks!

    Personally I would avoid optimizing the PDF's via Adobe Acrobat Pro unless you understand what you are removing from the PDF; having said that, it is the most effective way to reduce the file-size in the right hands.
    If I am sending out layouts for commercial print I change my default Print / Export setting from Standard to PDF/A-1b:2005 (CMYK). This will resolve a lot of common print problems for print-ready documents and it should embed your fonts and flatten transparencies etc.
    If your document is still too large you run an Audit Space Usage using Adobe Acrobat Pro. In the left pane enable 'Content' and then hit the button in the top left corner of the Content Pane and choose Audit Space Usage.

  • How can I send a file that CAN NOT be printed or saved by the recipient?

    How can I send a file that CAN NOT be printed or saved by the recipient?

    Impossible. PDF files don't stream, so they cannot be opened until they've been saved.
    You can truly prevent printing by using DRM, or ask nicely by using a permissions password (though that's ignored by non-Adobe software).

  • Invoice outputs are not printing after saving the document..!

    Invoice outputs are not printing after saving the document. Eventhough we maintain all condition records not only that Processing log also it showed that it has been processed on some date. but customer not received the printout
    Amar

    hI,
    GO TO IMG, SD, BF, OUTPUT CONTROL, OUTPUT TYPES, SELECT UR OUTPUT TYPE, GO TO DETAILS ICON AND ASSIGN THE VALUE "ISSUE OUTPUT IMMEDIATELY SAVING THE APPLICATION" FROM DROP DOWN DOWN LIST IN THE DEFAULT VALUES
    AND ASSIGN THE RELEVENT PRINTER TO USER ID IN SU01 AND IN CONDITION RECORDS
    REGARDS,
    SK
    Edited by: Sadanandam Kasarla on Mar 16, 2009 12:07 PM
    Edited by: Sadanandam Kasarla on Mar 16, 2009 12:08 PM
    Edited by: Sadanandam Kasarla on Mar 16, 2009 12:10 PM

  • Problem Printing to Large Format Printers From SGD

    I am having a problem printing to large format printers when using the PDF printing option for SGD. The SDG Universal PDF Viewer recognizes the print format that I specify but on the client device side the pdf that is produced is always Letter size. If a larger format is speciied the client side pdf displays a small portion of it - almost as if it were clipped at the Letter size. Has anyone experienced this. Is it an SGD problem per se or is it an issue with the Ghostscript configuration and if so is ther a way I can change the config?
    I am running 4.6.2 in an RHEL5 environment. The application server I am primarily working with is Windows Server 2008. The printers I have tried to print larger formats to are HP CLJ 2800 PS (Tabloid size), HP Designjet Z6100 (E size), and HP DesignJet 4020ps(E size). In all cases the plot appears to have been clipped into a Letter size format on the client device side.
    Thanks,
    Edited by: Odog314 on Jul 12, 2012 3:15 PM

    You may have encountered a limitation with the GARO driver, especially if it is connected to the USB port of the Express. We have an iPF8100 but it is connected directly to our network via Ethernet so I've never tested the printer via USB. But if the driver is anything like the consumer inkjet drivers, there is often issues with the driver determining the printer model on the end of the USB and this stops the printer queue creation.
    Have you tried connecting the printer via Ethernet to the Express and then seeing if you can add the printer queue? You will have to set an IP address in the machine if DHCP is not enabled.
    PaHu

  • Can a completed Aperture photo book be placed on a website for viewing by friends?  I already had several copies successfully printed by Apple.

    Can a completed Aperture photo book be placed on a website for viewing by friends?  I already have several copies successsfully printed by Apple?  Thanks. Buzz22

    There is no direct web publishing of a book, sorry. But as a work-around: You can print your book to pdf - select it in the book in the Inspecktor panel and use "Print book".  Then select the "PDF" buttun in the print panel and save a pdf file. Upload the pdf to a server for sharing (ftp, Drop box) and send your friends a link or place a link to the file on a webpage.
    Regards
    Léonie

  • Changing the Default No.of Copies in Print Window

    HI All,
    How to change the default number of copies while printing in Print POP Up box for Standard Transactions for some specific users.
    Regards,
    Sudhir

    Hi Neeraj,
    Thanks very much for the info! Unfortunately, when I get to the "MemberSelectionRowsPerPage" tab, I'm not able to change the default from 20. The "20" appears in blue numbers, and while I am able to modify the field, as soon as I click away from it, or click enter, or click refresh, it reverts back to "20". I've also tried modifying the number, and closing out the screen, but when I go back to the tab to check, it has reverted back to "20".
    Is there a way to save this setting that I'm missing? Has anyone else seen this before?
    Thanks in advance!
    -Jim

  • Defaults to 3 copies of print item

    have ti change manually to 1 copy wanted. defaults to 3 copies at print screen. cannot save to 1 copy . how to set default to 1 copy.

    Welcome to the forum , I would be delighted to help you with changing your copy settings on your 8600 printer.  I actually found this information in the User Guide for your model; You can customize copy jobs using the various settings available from the printer's control panel, including the following: Number of copies, Copy paper size, Copy paper type, Copy speed or quality, Lighter/Darker settings, Resizing originals to fit on different paper sizes.  You can use these settings for single copy jobs, or you can save settings to be used as defaults for future jobs. To change copy settings for a single job 1. Touch Copy.2. Select the copy function settings you want to change.3. Touch Start Black or Start Color. To save the current settings as defaults for future jobs1. Touch Copy.2. Make any changes to the copy function settings, and then touch Settings.3. Touch the down arrow, and then select Set As New Defaults.4. Touch Yes, change defaults, and then select Done.  Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks, 

Maybe you are looking for