Copy delivery header text to shipment header text

Hi All,
Please let me know the user/customer exit to copy the header text of delivery to shipment while creation(VT01N) or deletion(VT02N) of shipment for deliveries.
Please provide the code samples or procedure, if you have any.
Thanks in advance and points will be rewarded
-Venkat

Hi
Use these User exit and write the code for the same in one perform of its include this is having the delivery details and capture the same into your shipping
EXIT_SAPLV56F_010
regards
Shiva

Similar Messages

Copying header text to the billing text in the same document

Hi,
I just want to know ,can we copy one text to another text in the same document.it means that once we enter the header text , can it be copied into all the texts and inturn it should be copied to all the proceeding documents.
Regards
Ram Pedarla

Hi,
No, this will be not possible in SAP standard. U have to enter manually only in any of the following.
If u enter text in customer master data of all types manually then u can copy the same into sales order all text types and like subseq doc automaically..
In the same way if u dont want to maintian in custoemr and want to maintain in Sales order then maintain in all text types in order manually then it will be copied to subsequent document also automaitcally..
Hope u have under stood..

Copy the PR header Text to RFQ header Text while Creating W.R.T

Dear Guru's
While Creating with reference I want to Copy the PR Header text into RFQ Header Text..
Please do the needfulll
Thanks in Advance.
GSANA

Dear You can not copy the header text of PR to RFQ in the standard SAp, as PR is internal document and RFQ is external. but if you even want to do it then contact your ABAP team.
regards,
qsm sap

How to get vendor text in PO header?

The requirement is to put vendor text in vendor master (XK03) and in Purchasing screen -> extras->text.
We have a Purchasing Memo as well as a "Purchase Order Text" which i fill up. I require that the "Purchase order text" field value from vendor master should show in the PO header text. But it is not appearing currently.
What could be the issue and how can i activate this?

Hi,
Make sure you have maintained the text rules in config.
IMG>MM>Purchasing>PO>Texts-->Copying rules for header texts
Maintain text linkages for header text (or whichever text value you want) with source object being vendor master and source "text purchase order text/memo".
Thanks.

Warehouse instruction text. in PO header

Hi,
Following is the requirment,
we are looking for a possibility to store a permanent information in the warehouse instruction text.
Where can I maintain this?
This is in Purchase Order on header, Text Tab.
Regards,
Ajinkya

warehouse instruction text is probably an own defined PO header text in your system, as the PO goes usually to your vendor and not to your own warehouse.
How is this text defined with copy rules? From where does it get the text, probably not from material master, as this would be item level text. usually a header text is copied from vendor master, contract or RFQ or or copied from existing old PO or entered manually in each PO.
You can maintain general text in SO10, and can then include this text manually in the PO.
or you take this text with help of the Business Add-In (BAdI) ME_PROCESS_PO_CUST , which enables you to extend the business logic of the Enjoy purchase order on an individual basis.
Use the method Process_HEADER

How to add texts to the Header Text in the PO header

Hi
In our system, some already added remarks are appearing in the PO header text field when i open a PO. I wanted to edit the remarks appearing in the PO header as a default. I wanted to know where these predefined texts are filled in. Appriciate if you can help me findout the same.
Thanks
Venkat.

Hi
In the above said configuraiton path, they have mentioned "Purchase order" in the source object and the "Header Text" in the source text.
But i wanted to konw where the below mentioned genereic Notes/Remarks will be entered. For all the purchase orders, this text is autmatically get copied into the header text. i wanted to know from where it is originating and where we are maintaining.
"Notes / Remarks :
Vendor's signature on the attached PO terms and conditions is an integral part of this PO
All documents should have a PO number
Invoices should be submitted to the attention of the Finance department
Please attach a PO copy with all claims to avoid delay in receiving payment.?"

PR HEADER NOTE TEXT TO RFQ HEADER NOTE TEXT

Hello all
We are maintaining the PR Header Note & we are creating the RFQ with reference to the PR , we are maintaing the PR Header note , but it is not getting copy in RFQ Header note
Kindly suggest
Thanks in advance
Regards,
Rajesh

hello
Thanks for reply
After selecting the Header note in RFQ under Copying rules for header text & Selecting the Header note only text linkage is allow is RFQ
whether i have to make new entry as PR
No entry of PR availbale in for selection
Please suggest
regards
Rajesh Dalal

BAPI : "BAPI_REQUISITION_CREATE" pass the Long Text Field of *Header Note*,

Hi Experts,
        i am using the BAPI : "BAPI_REQUISITION_CREATE". it' is working Fine.But i need to pass the Long Text Field of Header Note, Item Text, Item Note,Delivery text and Material P.O text through the BAPI.
Plz,Help me to Achieve this.
Thanks in Adv.
V.S.Naidu.

Below is the code for BAPI_PR_CREATE just go through it and your dbout will be solved
it has example for multi line header text as well as line items...!
Hope it helps
CLEAR GV_BAPIMEREQHEADER.
MOVE 'NB' TO GV_BAPIMEREQHEADER-PR_TYPE.
move 'X' To GV_BAPIMEREQHEADER-AUTO_SOURCE.
CLEAR GV_BAPIMEREQHEADERX.
MOVE 'X' TO GV_BAPIMEREQHEADERX-PR_TYPE.
MOVE 'X' TO GV_BAPIMEREQHEADERX-auto_source.
CLEAR WA_BAPIMEREQITEMIMP.
MOVE :
'00010' TO WA_BAPIMEREQITEMIMP-PREQ_ITEM,
**'001' TO WA_BAPIMEREQITEMIMP-PUR_GROUP,
*'TWISTED PAIR CABLE' TO WA_BAPIMEREQITEMIMP-SHORT_TEXT,
'C-1030' TO WA_BAPIMEREQITEMIMP-MATERIAL,
'1000' TO WA_BAPIMEREQITEMIMP-PLANT,
'100' TO WA_BAPIMEREQITEMIMP-QUANTITY,
'20091001' TO WA_BAPIMEREQITEMIMP-DELIV_DATE.
APPEND WA_BAPIMEREQITEMIMP TO GT_BAPIMEREQITEMIMP.
CLEAR WA_BAPIMEREQITEMX.
MOVE :
'00010' TO WA_BAPIMEREQITEMX-PREQ_ITEM,
'X' TO WA_BAPIMEREQITEMX-PREQ_ITEMX,
*'X' TO WA_BAPIMEREQITEMX-PUR_GROUP,
'X' TO WA_BAPIMEREQITEMX-SHORT_TEXT,
'X' TO WA_BAPIMEREQITEMX-MATERIAL,
'X' TO WA_BAPIMEREQITEMX-PLANT,
'X' TO WA_BAPIMEREQITEMX-QUANTITY,
'X' TO WA_BAPIMEREQITEMX-DELIV_DATE,
'X' TO WA_BAPIMEREQITEMX-EXT_PROC_PROF.
*EXT_PROC_REF_DOC
*EXT_PROC_REF_ITEM
APPEND WA_BAPIMEREQITEMX TO GT_BAPIMEREQITEMX.
CLEAR EXTRA_FIELDS.
MOVE '00010' TO EXTRA_FIELDS-BNFPO.
MOVE '12345678901' TO EXTRA_FIELDS-ZZDANOSPR_NO.
MOVE 'MUM01' TO EXTRA_FIELDS-ZZPORT.
MOVE '20100505' TO EXTRA_FIELDS-ZZETD.
MOVE '20100506' TO EXTRA_FIELDS-ZZETA.
MOVE '123456789123456789' TO EXTRA_FIELDS-ZZEXTWG.
MOVE TEMP TO EXTRA_FIELDS-ZZrob.
CLEAR WA_EXTENSIONIN.
MOVE 'BAPI_TE_MEREQITEM' TO WA_EXTENSIONIN-STRUCTURE.
MOVE EXTRA_FIELDS TO WA_EXTENSIONIN-VALUEPART1.
APPEND WA_EXTENSIONIN TO GT_EXTENSIONIN.
CLEAR WA_EXTENSIONIN.
MOVE 'BAPI_TE_MEREQITEMX' TO WA_EXTENSIONIN-STRUCTURE.
MOVE EXTRA_FIELDS TO WA_EXTENSIONIN-VALUEPART1.
APPEND WA_EXTENSIONIN TO GT_EXTENSIONIN.
CLEAR WA_EXTENSIONOUT.
MOVE 'BAPI_TE_MEREQITEMX' TO WA_EXTENSIONOUT-STRUCTURE.
*MOVE EXTRA_FIELDS TO WA_EXTENSIONOUT-VALUEPART1.
APPEND WA_EXTENSIONOUT TO GT_EXTENSIONOUT.
clear wa_PRITEMTEXT.
MOVE '00010' TO wa_pritemtext-preq_item.
move 'B01' TO WA_PRITEMTEXT-TEXT_ID.
MOVE 'THIS IS JUST FOR TEST' TO WA_PRITEMTEXT-TEXT_LINE.
APPEND WA_PRITEMTEXT TO GT_PRITEMTEXT.
clear wa_PRITEMTEXT.
MOVE '00010' TO wa_pritemtext-preq_item.
move 'B01' TO WA_PRITEMTEXT-TEXT_ID.
MOVE 'THIS IS THE SECOND LINE' TO WA_PRITEMTEXT-TEXT_LINE.
APPEND WA_PRITEMTEXT TO GT_PRITEMTEXT.
BREAK-POINT.
CALL FUNCTION 'BAPI_PR_CREATE'
EXPORTING
   PRHEADER                     = GV_BAPIMEREQHEADER
   PRHEADERX                    = GV_BAPIMEREQHEADERX
*   TESTRUN                      =
IMPORTING
   NUMBER                       = GV_NUMBER
   PRHEADEREXP                  = GV_PRHEADEREXP
TABLES
    RETURN                       = GT_BAPIRET2
    PRITEM                       = GT_BAPIMEREQITEMIMP
    PRITEMX                      = GT_BAPIMEREQITEMX
*   PRITEMEXP                    =
*   PRITEMSOURCE                 =
*   PRACCOUNT                    =
*   PRACCOUNTPROITSEGMENT        =
*   PRACCOUNTX                   =
*   PRADDRDELIVERY               =
    PRITEMTEXT                   = GT_PRITEMTEXT
*   PRHEADERTEXT                 =
    EXTENSIONIN                  = GT_EXTENSIONIN
*    EXTENSIONOUT                 = GT_EXTENSIONOUT
*   PRVERSION                    =
*   PRVERSIONX                   =
*   ALLVERSIONS                  =
*   PRCOMPONENTS                 =
*   PRCOMPONENTSX                =
*   SERVICEOUTLINE               =
*   SERVICEOUTLINEX              =
*   SERVICELINES                 =
*   SERVICELINESX                =
*   SERVICELIMIT                 =
*   SERVICELIMITX                =
*   SERVICECONTRACTLIMITS        =
*   SERVICECONTRACTLIMITSX       =
*   SERVICEACCOUNT               =
*   SERVICEACCOUNTX              =
*   SERVICELONGTEXTS             =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
*   WAIT          =
* IMPORTING
*   RETURN        =
WRITE : 'THE PR CREATED IS : -',GV_NUMBER.

Text in PO(text tab in header & item) is not shown in the Print Preview

Hi Guys,
            I face a problem in ME23N.Text maintained in Purchase Orders (text tab in header & item) is not shown in the Print Preview.
            Can you guys help.Do I need to write a subroutine pool for this.
            <<text removed by moderator>>
Regards,
Rajiv
Edited by: Matt on Nov 12, 2008 1:20 PM

Hi ,
Use bapi bapi_po_getdetail .
CALL FUNCTION 'BAPI_PO_GETDETAIL'
    EXPORTING
      purchaseorder   = is_ekko-ebeln
      item_texts      = c_x
      header_texts    = c_x
    TABLES
      po_header_texts = it_header_text
      po_item_texts   = it_item_text.
Regards
Neetesh

Is there a way to create a heading with shading behind the text and thin lines above and below?

I'm working with InDesign CS6, Windows 7.
Is there a way, using paragraph rules, to create a heading with shading behind the text and thin lines above and below the text?
I'd like to create headings that look like these:
Thank you!

I have a document where I almost do such, but without the fill. I use a Head Style which Spans Columns for this instance; it allows the haeds to flow and fill the width.
Paragraph Rules above and below are turned on with plenty of offset.
I tweaked my setting to accomodate your need - It required only one instance, not above and below, and changing the stroke to a double stroke.
It may be necessary to create a custom stroke to modify the proportion of stroke vs fill. There is a difference of thin-thin and thick-thick, neither of which seemed perfect but might be dependent on the Character height.
Creating custom strokes is accomplished via the Strokes Panel.

How to add an image or static text in the header of EACH page of a cross-Tab report

Post Author: rtutus
CA Forum: General
Hi, I use Crustal 11.0.
I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
The problem, I want to add a page header for each page of the report.
When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
                         Items         Jan       Feb       March .....................Total
Category 1
                         Item11         val11     Val12      Val13                     Total values
                         Item12         val21     Val22      Val23                     Total values
                         Item13         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 2
                         Item21         val11     Val12      Val13                     Total values
                         Item22         val21     Val22      Val23                     Total values
                         Item23         val31     Val32      Val33                     Total values
                         Items         Jan       Feb       March .....................Total
Category 3
                         Item31         val11     Val12      Val13                     Total values
                         Item32         val21     Val22      Val23                     Total values
                         Item33         val31     Val32      Val33                     Total values
You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
Thanks a lot for your help.

Hi Divya,
you could do for example in the wdDoInit() of the view
wdContext.currentContextElement().setPicture("picture.gif");
Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials. I have learned tremendously from them.
Hope this helped
Harald

Vertical text in table heading

Hi,
I would like to save some space in some reports and I would like to change orientation of text in table heading.
Is it posible to have vertical text in table heading?
What I want is showed on this picture: [Vertical text|¨http://img179.imageshack.us/img179/234/obiverticaltext.jpg]
Thank you for some tips.

Hi,
Go through this...will help you solve your requirement....http://blog.trivadis.com/blogs/andreasnobbmann/archive/2009/07/17/vertical-text-in-obiee.aspx
Use the same code Writing-mode: tb-rl; filter: flipv fliph; in custom css style of column heading.(column properties->column format->edit format icon beside column heading->css style)
Regards,
Srikanth

Two column text box with header

I have a text box that is set to flow as two columns. The beginning of the text box has a header then a list of bulleted items. My problem is that when the text flows to the second column, it is set at the top (in-line with the header). What I would like is to do something like set a top margin just for the second column so it will line up with the body text from the first column. Is there an easy way to do this or should I just use two text boxes and position the second box where I want it?

Simplest is to use two text boxes.
Dave Saunders has a script (http://pdsassoc.com/index.php?Nav=downs&Ban=Downloads&Info=downloads.html) that can do it with one text box by putting your head in a one-column table that intrudes into the second column. I've never used his script, and I see his website says CS and CS2, so I'm not sure if it would work with your version.
You could probably achieve what you want (because I see you don't actually need the head to straddle, just the texts to top align with each other) by forcing a huge leading on one character in a frame that's set to First Baseline Offset by Leading.
Ken

How to make a text variable (running header - character) resize a text frame?

I have successfully been able to get a metadata text variable to auto-resize a text frame, but when I change the text variable to a running header-character/paragraph variable, the text frame does not resize - in fact it gets smaller and squashes the text.
Surely if Indesign can handle one kind of variable it should handle another??
Please help!

Thanks all.
Will- I tried adding another character to the text box but this made no difference.
Eugene- I'm trying to avoid the purchase of any 3rd party plugins due to budget constraints.
I realised that all I needed to do was use a wide paragraph rule to emulate a box behind the text, and make the text box long enough to hold all possible variables.
One other issue has now cropped up, the running header (character) only grabs the text up to the first return, but I need it to grab all text formatted with the Character Style (2-3 lines max).
I require a forced line break in the title (where the header is being pulled from) as it has a paragraph rule style attached, requiring a full return for each line of the title.
Any ideas?

Can the text in the header row be slanted?

In Excel the text in the header row can be slanted at an angle in order to show a long header text in a narrow column. Can this be done in Numbers?

John,
Numbers doesn't support this directly. A quick way to fake it is to make a chart with slanted category axis labels. This won't give you slanted cell borders, but then you didn't ask for that.
These particular instructions have an advantage over just pasting text boxes over the cells in that the same text is in the cell as in the label pasted over the cell. This may be helpful if you want to reference a header cell's content in an expression.
Jerry

Copy delivery header text to shipment header text

Similar Messages

Maybe you are looking for