Copy Feature

Is there a copy functionality In HRMS when creating a position (similar to PO in Purchasing Module)to save the user from entering similar data over and over again.

No, no position copy function exists at the moment, but it should not be too hard to implement that via the position api.

Similar Messages

Unable to use 'copy' feature with registered version of quicktime pro.

Hi.
I have a registered version of Quicktime pro (7.1.6), and i am unable to use the copy feature. I captured several videos from work using a windows box and an application whose name escapes me at the moment. Due to the windows app being garbage, i was only able to capture in MPEG1 format (MPEG2 caused the app to crash, of course). I have brought the files home and am now unable to copy selections of it for exporting into smaller files. I can highlight lengths of the video (no audio, just video) but the 'copy' feature is grayed out still. Any ideas on what is causing this? The video format is as follows:
MPEG1 Muxed, 640 x 480
FPS: 29.97
Data rate: 4066.42 kbits/sec
I'm running 10.3.9, but have also had no success on a 10.4 macmini, so the OS doesn't seem to be the issue.
I'm trying to get this video into imovie, but since it's over 600 megs, imovie cops out after a few hours and says it can't import it.
Help?

Not all multiplexed videos come with AC3. They don't have to have audio in the first place. Some of them come with Linear PCM, which is the case for iDVD's VOB files, and MP2. If a multiplexed video is equipped with AC3, you are right, and the resulting modified sub-clip won't contain audio. But if it's Linear PCM or MP2, the edited sub-clip will contain audio.
I'm finished with this case.
Message was edited by: Horror in Oklahoma

Copy Feature doesn't work -HP LaserJet Pro MFP M126nw- Windows 8

The copy function is not working and display is not showing anything. Also error indicator remains on

Hi there,
Welcome to the HP Forums!
I understand that your copy feature will not work on your HP LaserJet Pro MFP M126nw and the display will not show anything. I am happy to help you!
Please take a look through this guide. The Printer Will Not Turn On or Respond When the Power Button or Power Switch is Pressed.
Hope this helps you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Disabling copy feature in Crystal Reports for Visual Studio 2010 SP2

Hi ,
When I tried Crystal Reports for Visual Studio 2010 SP2 , I saw a new feature which allows user to copy content of the report after selecting it. I am using .net 4.0 winform application. I want to suppress this feature. I want the selection of objects in report to work as earlier version. I could hide the copy icon in toolbar . But that doesn't change the way selections happens in the report . Please tell me how to suppress the copy feature completely when we use SP2 ?

Hi Jijo Paul,
We found a hidden method to disable the copy as it used to be. It is hidden meaning it's not supported so if you run into any problems using it or if it gets removed there is nothing we can do for you but give this a try:
// this hides the button and disables the CTRL C command
crystalReportViewer1.ShowCopyButton = false;
crystalReportViewer1.SelectionMode = CrystalDecisions.Windows.Forms.SelectionMode.None;
Thanks again
Don

Copy Feature Not Available

I'm following directions I found on line to create a digital signature.
1) I've scanned the signature and cropped, and saved as a new file (.PDF).
2) Next step is to use Magic Wand tool to click in white area around signature, then select INVERSE from the SELECT menu. Done with no problem.
3) Next step is to choose COPY, then FILE > NEW > IMAGE FROM CLIPBOARD and save this file as a .PNG.
Problem: Can't complete step 3. The copy feature isn't available to me. It's faint gray and nothing I've done will allow me to use that feature. Any suggestions?

Okay, I've made a step-by-step screenshot guide in Photoshop (not elements) for your situation, considering you mentioned you're totally new to this. This is not exactly the same as the 'book' you're following but it's an easy way to make a digital copy of your signature.
Once you've saved your signature from scanner, Photoshop > File > Open, choose your file and open it. If you're opening your signature file directly, you may or may not see the 'Background' layer highlighted above. The thing here is that if you see a background layer + Layer 1 (as seen above), double click on 'Background' layer, hit OK once. Hit delete with 'Background' layer selected. This will get rid of that layer, leaving only the signature layer. In some cases, when you open your signature scan image if you only see 'Background', it means your signature data actually lies within that layer. In that case, just double click and hit OK. Don't delete. We'll just unlock the layer by doing so.
Once layer is unlocked, you can process your image.
First click on the 'Magic Wand' tool on the left (highlighted above). Then, single left click on any white portion of your image. Notice here that the 'Background' layer is deleted as I didn't want that layer since I had to make this signature transparent. Note that this will not select 'ALL' white areas if they're not contiguous. Proceed to next step.
After you single click as shown in previous step, right click on the white area again, select 'Similar' from the context menu. This will select all white areas in the image that we want to make transparent.
Now, all the white areas would've been selected after the previous step. You can now press 'Delete' on your keyboard to delete them and be left with just the signature on a transparent background as shown above.
Now, we're ready to save. File > Save As as shown above.
Choose filename and select format as 'PNG' as shown above. Click 'Save'.
You'll be shown a PNG Options dialog box. Leave the settings default and hit OK.
That's it! Your signature would be saved as a PNG file (with transparency) to the location you chose to save it in.
Trust this helps!

Css copy feature

Why does the new css copy feature in photoshop appear not to work well in Dreamweaver?

I presume you're referring to the new Copy CSS command in Photoshop 13.1 (Cloud only update).
http://tv.adobe.com/watch/photoshop-cs6-featuretour/new-css-support-in-photoshop/
http://psd.tutsplus.com/articles/news/cs6_1/
What exactly do you mean by not to work well in Dreamweaver? Got any specific examples you can show us online?

Firefox copy feature always adds extra space before or after when double clicking to select text

I have only just started using Firefox but I've noticed a strange "feature" (I'm not sure if it's a feature or a bug, thus the quotes). I'm used to Opera and IE where by when I double click some text the text will be automatically selected. Firefox does something like this but for some reason I don't yet understand it adds an extra space at the beginning or end of the selection. This is a problem for someone like me who for work does a lot of copy and paste. I use web software that is intolerant of extra spaces and this feature/bug is going to end up causing some major issues.
Is there a way to alter this behavior so that it behaves more like all my other computer programs? Your help is greatly appreciated.

Not sure if this will help with your issue, but can try.
In the URL bar type about:config
Then change layout.word_select.eat_space_to_next_word to false.

Shadow Copy feature on Servers with DPM

Hello There,
Is it a recommended configuration to have Shadow Copy enabled on the file servers which are also being backed up by DPM? Please suggest.
And what are the pros and cons of using this mixed configuration.
Regards,
maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

Hi,
Adding Pros and Cons.
Local shadows enabled on the DPM protected computers.
PRO - Clients will get previous versions of files directly off of the protected server. May be faster copy depending on network topology and speeds.
PRO - Server owner has more control over the length of time previous versions are maintained based on shadowcopy storage limits.
CON - Uses local storage on file server, so may limit shadow copy storage size.
CON - Users will never see previous version on the DPM server, so that may limit self-recovery of file if they are maintained for a longer time on the DPM Server and not available in local shadow copy.
CON - Unless educated, clients (users) may not know that backups of files are available on the DPM server, so may settle for a previous version available to them only from the file server instead of asking for a restore for a more desirable version from
help desk.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Printer screen is unreadable so can not use copy feature

Printer display is nothing but vertical bars of different shades of grey and widths. Therefore I cannot use the copy function. Well actually I can by guessing where to touch the scan function and number of copies. Since the display is unreadable I can print and scan from PC but not copy.
Is there a way to control (use) the "copy" function from my PC?

Hi @bartie2,
You can not copy from the PC, but you could scan, then print.
With regards to the condition of the screen, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
Let's perform a hard reset. To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in.
I hope that if you can not get the screen working, that scan then print is a viable work around for you to make copies.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How do you control the "copy" feature (blue highlight)?

When I,m using any app ( eg Facebook) text suddenly highlights and ' copy' pops up. How do I avoid this from happening?

It happens when you hold your finger down on the screen. Practice is the best option. But if it keeps coming up just tap elsewhere on the screen and it will dissappear
Hope this helps...

Tethered Capture feature request - make a 2nd copy

Make a 2nd copy feature is available during import of images, so why not whilst shooting tethered. Would love to see that feature. Please please please consider adding.

Short answer: No. That is the way it is.
Why? The Make Second Copy during Import is designed to be a backup of your memory card processes-not a back up of your files as you store them on disk. It is intended to be a transient copy that allows you an immediate backup until such time as a File System Level backup can be performed, allowing you to have two copies so that you can reformat your memory cards.
I agree it would be nice if the folder storage strategy was duplicated for the backup as it is created for the import but that is not something you can set the program to do currently. I remember it behaving differently versions ago but do not recall exactly how it used to work.

Does itunes automatically copy files to its folder?

If I download music from a website to my desktop, and then doubleclick the icon on my desktop, it starts playing in itunes. But it also looks like it saves a copy of the file in the itunes music folder. Can i just safely delete the files off my desktop now (and still play the music in future) because they have been automically copied into the itunes folder?
Also, is there a way to turn this feature off, so that I can still play the music by clicking on the icons on the desktop, but itunes doesn't automatically copy the files into its folder?

Hi Jeff,
iTunes does put a copy of the song in your Music Folder, and yes, you can delete the file off your Desktop as soon as it opens in iTunes, I'll take a minute now to see if you can turn off the automatic copying feature.
Edit:
You can turn off the auto-copy setting by going to iTunes-Preferences-Advanced-uncheck the box next to "Copy files to iTunes Music Folder when adding to library"

Creation of Order from copying existing order in B2B

Hello Folks,
Do we need to do the copying control setting in SAP CRM GUI and also any specific setting in SHOP MANAGEMENT PROFILE for copying exiting transaction on B2B screen?
Regards

No need for any additional copy control. Or can I say, Copy Control configs have NO effect on web screens.
So, I am not sure how you would want to achieve "Copy" transaction in Web?
I can give you a hint. In the standard application (E-Commerce), there is an option to "Save as Template", where an order (basket / cart) can be saved as an Order Template. This uses "create from predecessor" classes in the Java layer and a similar function module in the backend (CRM) ABAP layer. With some enhacement effort, you can easily leverage these classes and function modules to implement your Copy feature.
Easwar Ram
http://www.parxlns.com

Copying Large Blocks of MP3 files from External Hard Drive to iTunes

I'm trying to copy large numbers of MP3 files from my external
hard drive to iTunes. I tried putting them in the iTunes music folder but this did not work. Then I tried selecting blocks of the songs and dragging and dropping them in iTunes. This also did not work because when I select a large block of files and then click on them (holding down the mouse button) to drag them, then they become "unselected." So, I guess my question is 2 fold: Why can I not copy and paste these files to some folder on the Macintosh Hard drive where they will be recognized by iTunes (show up in iTunes) and what is wrong with my clicking and dragging technique? Am I losing it?

If you are trying to add tunes to your library then do the work from within iTunes not via the Finder. Droping the tunes into the iTunes folder will not create a reference for iTunes to find the tunes. You should be able to drag-drop the tunes/folders into the main iTunes window.
It is usually easier to use the 'keep' and 'copy' features selected. This way iTunes will keep your tunes organized and all in one place. If you work from in the iTunes interface then you will likely not go wrong.
From the iTunes File menu select 'add to library' (+O) and navigate to your ext HD and iTunes should bring those tunes into your library.
MJ

Officejet6600 print perfect but I get error message when scanning and just idles when trying to copy

Hello, I have an OfficeJet6600 printer and up until just yesterday this unit funtioned normally and had no trouble printing, scanning or copying from my computer. Yesterday however I found I could not scan and then worked with an HP support Rep on the phone regarding my HP OfficeJet6600 not scanning properly. I am connecting to my printer wirelessly and have no issues printing. However, I cannot scan and when I attempt to do so get a scanner unreachable message. The Rep deleted and reloaded every program and file associated with the printer and still the same result. He advised me that the issue lies in my Windows 7 64bit OS and I might want to contact Microsoft support for a patch to fix the problem. He also advised me to chat the forum as there may be a solution there that someone already optained from Microsoft.
I starting looking through the forum this morning and came across some correspondence a Rep had with another customer and he advised the customer to check to see if the copy feature worked. He stated that if it did not work either then more than likely it is a hardware problem and not a software problem. At any rate, after reading that I tried to copy and sure enough the printer cannot complete that task either. When you hit copy it say's copying on the printer screen but little icon beside copying just spins forever and nothing happens. You actually have power down the printer to get it to stop. Now I am confused.... Do I have a software or hardware issue?

Hello,
After reading the problem description, i see that its a printer hardware issue. Its the scanning module that seems have an issue.
The solution to this issue is Servicing the printer unless you have tried the below mentioned steps...
While the printer is ON, unplug the power cord from back of the printer.
Wait for 60 seconds.
Plug in the power cord directly to a wall outlet ( bypass the surge protector / power strip ).
If printer does not power ON, then press the ON button to do so.
When the printer goes silent, then try making a COPY.
If issue still exists, then its time to service the printer.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Copy Feature

Similar Messages

Maybe you are looking for