Copy ios to Cisco 1140 AP
Hi; I'm working on the Cisco 1140 AP that is loaded with a LightWeight IOS. I need to change the IOS to standalone version. I managed to enter to the configuration mode and tried to use tftp to copy IOS to device flash. but the device periodically (actually every 1 minute) tried to chage the IP address by connecting to DHCP. even I assigned the IP address statically, but after a minute, It changed the method to assign through DHCP, because it says that needs to obtain configurations from a controller. TFTP works well, but at the middle, changing IP interrupt the copying process. how can I copy standalone IOS to the device flash?
I think increasing the IP address obtaining timer will let me to start and finish copying process from TFTP server. but how can I do that? is there any solution to stop device to periodically change its IP address? tnx.
Here are some links that explain the conversion:
Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
https://supportforums.cisco.com/docs/DOC-18268
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
http://www.youtube.com/watch?v=QQ_NuxdRhQ4
https://supportforums.cisco.com/docs/DOC-14960
-Scott
Similar Messages
-
Missing "config" command in CLI (Cisco 1140 AP)
Hi All
I am trying to chang IP configuraton for my Cisco 1140 AP, but in CLI I dont have a "config" command (i used en before to enable administrative mode)
Bellow are the commands I can see:
AP7081.0506.d54a#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
monitor Monitoring different system events
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
release Release a resource
reload Halt and perform a cold restart
rename Rename a file
renew Renew a resource
rmdir Remove existing directory
send Send a message to other tty lines
set Set system parameter (not config)
show Show running system information
systat Display information about terminal lines
terminal Set terminal line parameters
test Test subsystems, memory, and interfaces
traceroute Trace route to destination
undebug Disable debugging functions (see also 'debug')
upgrade Upgrade software
verify Verify a file
where List active connections
In addition, I am keep getting the following messages:
*Mar 1 00:38:13.933: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:38:23.883: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
I am not sure what I am doing wrong. I try to do a hard reset but it didnt work.
Any ideas?Thanks
Another queastion:
I verified that my AP is Lightweight by the part id (AIR-LAP1141N)
Now, when I browse to Cisco download page, I have 3 options for OS:
- Autonomous AP IOS Software
- IOS Boot Images
- IOS Software
- Lightweight AP IOS Software
Which of the above should I use in order to switch the AP to regular mode?
Does anyone knows what is the difference between IOS software and the Autonomous IOS software? -
Update IOS using Cisco Prime LMS 4.1
Hello everybody,
I have 10 switches 2960 and would like to uptade its IOS using Cisco Prime LMS 4.1.
How can I make that?
Thanks for all.Hi,
Kindly check the below link :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.0/user/guide/configuration_management/swmgt.html#wp1369360
i hope this will help..
Thanks
Afroj -
IOs for cisco 1900 series router
Hi,
Kindly provide me the IOS version (cisco 1900 router) which can fix the below listed Bugs,
Cisco IOS TCP Listener Crafted Packets Remote DoS (CSCek37177)
Cisco Multiple Devices Crafted IP Option Remote Code Execution (CSCeh52410)
Cisco IOS System Timers Remote Overflow (CSCei61732)
Cisco IOS Secure Shell Server TACACS+ Multiple DoS (CSCed65778, CSCed65285)
Cisco IOS IKE XAUTH ISAKMP IPSec SA Establish Authentication Bypass(CSCeg00277)
Cisco IOS Telnet Service DoS (CSCef46191)
Cisco IOS H.323 Protocol Implementation Flaws Cisco IOS Malformed IPv4 Packet Remote DoS Cisco SSH2 Server/Client Malformed Packet Remote DoS (CSCdz60229, CSCdy87221, CSCdu75477)
Cisco IOS SSH Large Packet CPU Consumption DoS (CSCdw33027) Cisco SIP Crafted INVITE Message Handling DoS (CSCdz39284, CSCdz41124) Cisco IOS Data-link Switching (DLSw) Capabilities Exchange Remote DoS (CSCsf28840)
Cisco IOS AAA RADIUS Long Username Authentication Bypass (CSCee45312)
Cisco IOS TCLSH AAA Command Authorization Bypass (CSCeh73049)
Cisco IOS MMP Stack Group Bidding Protocol (SGBP) Crafted UDP Packet Remote DoS (CSCsb11124)
Cisco IOS IPv6 Packet Processing Arbitrary Code Execution (CSCef68324)
Cisco IOS Malformed BGP Packet Processing Remote DoS (CSCee67450)
Cisco IOS Multi Protocol Label Switching (MPLS) Packet Remote DoS (CSCeb56909)
Cisco IOS IPv6 Packet Processing Remote DoS (CSCed40933)
Cisco IOS SCCP Control Protocol Malformed Message DoS (CSCee08584)
Cisco IOS OSPF Packet Handling DoS (CSCec16481) Cisco IOS ARP Table Overwrite DoS (CSCdu81936)
Regards,
BalaHi,
The Current running IOS version is 12.2(4)T7. I tried through bug toolkit. but i couldn't able to consolidate the IOS to fix these bugs.
Regards,
A.Bala
leolaohoo wrote at Tue Jan 25 02:20:52 GMT+05:30 2011:
>Balakrishnan Appavu,
>
>A new message was posted in the Discussion thread "IOs for cisco 1900 series router":
>
>https://supportforums.cisco.com/message/3277195#3277195
>
>Author : leolaohoo
>Profile : https://supportforums.cisco.com/people/leolaohoo
>
>Message: -
Xmodem I/O error when copy IOS from tftp server
After I formatted the flash I am trying to copy the IOS from tftp server using "copy xmodem: flash:c3550-ipbasek9-mz.122-44.SE6.bin" command, in rommon mode. I am getting the I/O error message.
I did try to boot from tftp using the "set BOOT tftp:c3550-ipbasek9-mz.122-44.SE6.bin" command and then "boot" command and I get an "error loading tftp:" and "permission denied" message.
The tftp server is active; I did copy the old IOS before.
Here is the output from my switch:
switch: flash_init
Initializing flash...
flashfs[0]: 2 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 2048
flashfs[0]: Bytes available: 15996928
flashfs[0]: flashfs fsck took 12 seconds.
...done Initializing Flash.
Boot Sector Filesystem <bs:> installed, fsid: 3
switch: dir flash:
Directory of flash:/
2 -rwx 22 <date> env_vars
3 -rwx 43 <date> system_env_vars
15996928 bytes available <2048 bytes used>
switch: set
BAUD=115200
BOOT=tftp:c3550-ipbasek9-mz.122-44.SE6.bin
switch: copy xmodem: flash:c3550-ipbasek9-mz.122-44.SE6.bin
Begin the Xmodem or Xmodem-1k transfer now...
CCCCCCCxmodem:: I/O error
Help would be really apreciated.
Thank you.
Marius.I am using Hyperterminal and a regular serial cable. Right now I am working on a 2950 Cisco Switch
At the switch: prompt, I typed:
copy xmodem: flash:filename.bin [ENTER]
As soon as you see CCCCC in the terminal window.....
In Hyperterminal, from the tool bar, select Transfer -> Send File
Browse to the file, select Xmodem from the dropdown menu and select SEND
After the process has finished, type en and then boot flash:filename.bin
This will boot the .bin in your flash directory. The previous post only boots the switch that one time until it turns off. It does not put the image in the flash directory.
-->I dont know why it has to be done this way, but this was a bare to figure out. Nothing works like its suppose to though.
-This process will take a long time. Couldnt get a faster speed then 9600 -
Recovery missing or corrupted IOS of Cisco 2960 Catalyst Switch
Dear Team,
I have Cisco 2960 48P switch, It is keep getting restarted and config was erased.
when I tried to run the IOS from hypertrm in room mode, I am getting below error..
My doubt is, is there any issue with hardware & what is the cause of for below error
suggest me, is there any option to upgrade the IOS?
switch: flash_init
Initializing Flash...
flashfs[0]: 0 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 1024
flashfs[0]: Bytes available: 32513024
flashfs[0]: flashfs fsck took 9 seconds.
...done Initializing Flash.
switch: copy xmodem: flash:c2960-lanbasek9-mz.122-50.SE5.bin
Begin the Xmodem or Xmodem-1K transfer now...
CCCCBB0BB0................flashfs[0]: filesystem marked down. Use "fsck" to rec
over.
flash:c2960-lanbasek9-mz.122-50.SE5.bin: interrupted system call
switch:Error message means your BIN file is corrupt. You need to download again from the Cisco website.
-
Copy IOS .tar to a tftp server
I'm unable to copy a Cisco WS-C3750G-12S IOS to a tftp server. The IOS is a directory but is there anyway of copying the .bin IOS. The current IOS is a .tar IOS which is a directory. Below is a copy of the sh boot.
Sh ver
BOOT path-list: flash:c3750-advipservicesk9-mz.122-25.SEE4/c3750-advipservicesk9-mz.122-25.SEE4.binYou can copy your switch's current TAR IOS file to TFTP.
You can use tftpd32 v3.3 and set some parameters so file can be copied .
tftpd32 - > Settings -> TFTP Configurations
timeout (seconds) - 1200
Max Transmite - 100000
Type command on Switch (privileged EXEC mode)
Switch(2960-X)#
Switch(2960-X)#archive upload-sw tftp://tftp -server-ipaddress/ios file name
Switch(2960-X)#archive upload-sw tftp://172.20.100.100/c2960x-universalk9-mz.150-2.EX5
if TFTP server is directly connected to switch than it will be good so packets will not be drop.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/configuration/guide/2960scg/swiosfs.html#wp1258360
Thanks
Hitendra Suthar -
Attempting to upgrade Switch IOS with Cisco Works 2.06
I am running RME version 4.05 and am trying to test pushing IOS images on a 3560 48port PS switch running 128mb ram and 16mb flash. When I run an analysis on Cisco works it states I only have 127mb of ram and 15 mb of flash. Is this a known bug in Cisco works. I am concerned if I upgrade with the current ram I have it will not work.
Which report are you running specifically? I have seen something like this before.
-
Copy files between Cisco Failover ASA
Hi guys
I made an ASDM upgrade for one of my two CISCO ASA 5520. If I copy a file to the primary ASA's flash, is there any command I can run on the primary ASA to copy a file to the secondary ASA?
RegardsHello Luis,
You will need to do it manually on the secondary asa or use the failover exec mate command to do it from the primary
So lets say the TFTP server is 192.168.12.2 and both primary and secondary can access that server.
So from the primary asa
failover exec mate copy tftp//x.x.x.x/xxxx flash://file.cfg
Regards,
Julio -
Error when copying file under Cisco vpn client 5 x64
Hello Everyone,
My network scenario:
INTERNET<--->LoadBalacing( 2 Line) <---> Cisco ASA 5510<--> LAN
In Load Balancing i configured NAT port 500 and 10000 to Cisco ASA 5510 . On my laptop running windows 7 x64, i setup the vpn client v5 x64 and successfully connect to cisco ASA , I can copy file <1MB via VPN connection but have an trouble when copy file about more than 1MB
After the error occur, i checked the VPN Client status and it is connected .
Could you please help !!!!
I appreciate all your answer .
Thanks so muchNo one know the error ?
-
Can anyone please help with restoring or re-flashing a Cisco AP1200 with the Cisco IOS. I already have a couple of 1200's with IOS on them but am having a lot of difficulty with them.
I have a TFTP Server and the image but would appreciate anybody's help in restoring this image. Is there a specific set of commands that must be followed?
Ideally a complete walkthrough guide or list of any kind would be great.Hi,
If you need to restore an image, here is a tried and tested solution
Step 1
Rename the image file for the AP with the extension .default (i.e. rename c1200-k9w7-tar.123-7.JA2.tar to c1200-k9w7-tar.default) Place this file in the root of your tftp server directory, and start the TFTP service.
(Note: the tftp server needs to be on your pc or laptop)
Step 2
Change you PC/Laqptop IP address to between either 10.0.0.2 and 10.0.0.30 subnet 255.255.255.224
(The AP uses 10.0.0.1 mask 255.255.255.224)
step 3
Connect the PC and AP with a straight-through cat5 cable (NOT A CROSSOVER), connect the console cable between the PC and the AP.
Step 4
Hold the MODE button down, before connecting the power supply. Wait until the middle light on the front of the AP turns from AMBER to RED, then release the MODE button. (Takes between 20 and 30 seconds to change to RED)
This will update the IOS on the AP. If there is not enough memory in the flash area, flash will be automatically formatted and then the image will be uploaded to the AP.
This can take between 5 and 10 minutes. If you see the formatting message in the hyperterm window, there will be a 2-3 minute pause while formatting and resetting the AP. The AP will reset and continue to upgrade the IOS automatically.
When this is completed, you can configure the AP as per normal.
(Note: Keep an eye on the HyperTerminal window to see when this is finished, or wait till the lights on the front of the AP flash green.)
Hope this is of some help.
George. -
Hi all
I have a Cisco 4506 with supervisor module II WS-X4013+, this one have the version IOS cat4000-i9s-mz.122-18.EW3.bin, but i want enable SSH So i need upgrade the IOS version, Can anyone help me with a suggestion of IOS for this equipment?
Thank you.Below the info of each module, also this switch has been configured with OSPF
sh bootflash:
-#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name
1 .. image A5C615FB A18334 29 10322612 May 17 2005 17:41:40 +00:00 cat4000-i9s-mz.122-18.EW3.bin
sh module
Chassis Type : WS-C4506
Power consumed by backplane : 0 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 2 Supervisor II+ 1000BaseX (GBIC) WS-X4013+ JAE0921D09Q
2 24 10/100/1000BaseT (RJ45) WS-X4424-GB-RJ45 JAB06430AB1
3 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45 JAE0920CV75
4 6 1000BaseX (GBIC) WS-X4306-GB JAE074706LH
5 24 10/100/1000BaseT (RJ45) WS-X4424-GB-RJ45 JAB060705PM
6 24 10/100/1000BaseT (RJ45) WS-X4424-GB-RJ45 JAB0629052P
thank you. -
Hi,
I need help resetting the Cisco Aironet 1140 model AIR-LAP1142N-A-K9. I need to access its web browser but I don't know the password. I perform the mode reset method, but that didn't do anything. Maybe I have to access its CLI, but that I don't know how. Any help would be gladly appreciate.
Thanks.I type "show interface bvi1" to obtain the ip address, but it seems that it wasn't able to find it:
ap>show interface bvi1
BVI1 is down, line protocol is down
Hardware is BVI, address is d48c.b5b0.0b56 (bia d48c.b5b0.0b56)
Internet address will be negotiated using DHCP
MTU 1500 bytes, BW 54000 Kbit/sec, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:40:21, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
2 packets input, 658 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
3 packets output, 718 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out -
Can't copy IOS to a TFTP server
Hey gang-
Trying to copy the IOS from a 2950 switch to a TFTP server before upgrading the IOS. The switch can ping the TFTP server, I'm in privileged mode, I've done this many times on routers with no problems. I know that I'm typing the file name correctly, case-sensitive and all. It keeps complaining that it can't find a file by that name. I've tried it about 10 times with different variations; same results. Any thoughts?
Thanks
dave
(scroll down)
(I've tried it with and without the "/" after "flash")
Switch#copy flash:/c2950-i6q412-mz.121-13.EA1.bin tftp
Address or name of remote host []? 192.168.50.50
Destination filename [c2950-i6q412-mz.121-13.EA1.bin]?
%Error opening flash:/c2950-i6q412-mz.121-13.EA1.bin (No such file or directory
From a "show version":
Switch uptime is 7 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-13.EA1.bin"I have not seen it mentioned, but one of the possible causes for the error is that the file does not exist on the destination tftp server. One of the strange security measures taken by tftp, since there is no login required, is that a file to be updated has to already exist, even if it doesn't contain any actual data.
How you go about doing this will depend upon the OS your tftp server is on, but under most unix implementations, bring up a shell, change directory to the appropriate tftp folder, (sometimes /boot, sometimes /lib/tftpdir) and 'touch' the file you are attempting to upload. In this case 'touch c2950-i6q412-mz.121-13.EA1.bin'. You will then have to change ownership to match that needed by the tftpd server (should look like the ownership for other files in the directory)
Under windows, check the instructions for your tftp server software, but you can probably open a command shell change to the appropriate dirctory, then 'echo > c2950-i6q412-mz.121-13.EA1.bin' and you should be ready to go.
One other thing to try is using two '/' characters in the command, so 'copy flash://c2950-i6q412-mz.121-13.EA1.bin tftp' would be the command to use.
Hope this helps,
-Rusty -
How to load an ios into cisco aim-cue on 2811 router.
Goodday Everyone.
Please I have a Cisco aim-cue module that I want to load an IOS into on my Cisco 2811 Router,initially I thought it will be easy to do since I am used to upgrading Router and switches IOS using tftp server but it is not so.it seem different,I have been on google but I am not getting any joy.
Please can anyone kindly give me the steps I need to fellow to load the IOS on the aim-cue.
Many thanks.
KayceePlease check below link, it may be what you are looking for
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_tech_note09186a008064172a.shtml
Regards,
Nishant Savalia
Maybe you are looking for
-
This is my first post to this board, but I have been reading it lately. Thank you all for the schooling! I recently shorted out the firewire port on my JVC HD GY100. It seems to be a common problem from what I hear (the repair tech in Atlanta told me
-
I am New In Oracle 10g Try to Connect in isqlplus .... When I Start iSQL plus by Using isqlplusctl start it Started. But Cannot Connect With isqlplus... C:\oracle\product\10.1.0\Db_1\BIN>isqlplusctl start iSQL*Plus 10.1.0.2.0 Copyright (c) 2004 Oracl
-
JPEG recovery/repair question after upgrading to Mac Pro
Hi, first time posting here, so hopefully this is in the right area. Bear with me if this seems long-winded. I've been searching the discussion board for an answer on how to repair .jpegs, but I haven't come up with anything, so hopefully some of you
-
Static recording macbook issue
Can anybody help? I have constant static when recording on logic pro. Here's what i've done so far. Apple also want to charge me 85 pounds to have a look and they cant even guarantee results! I thought it was my external soundcard (alesis multimix) s
-
Calendar not pushing or fetching from iphone to imac
I seem to be having some issues with the Calendar too - I see a couple of other questions in here but none answered as yet. If I make a calendar appointment on the iphone it can take days to show up on iCal on the mac. I have mobile me - it works for