Xmodem I/O error when copy IOS from tftp server

After I formatted the flash I am trying to copy the IOS from tftp server using "copy xmodem: flash:c3550-ipbasek9-mz.122-44.SE6.bin" command, in rommon mode. I am getting the I/O error message.
I did try to boot from tftp using the "set BOOT tftp:c3550-ipbasek9-mz.122-44.SE6.bin" command and then "boot" command and I get an "error loading tftp:" and "permission denied" message.
The tftp server is active; I did copy the old IOS before.
Here is the output from my switch:
switch: flash_init
Initializing flash...
flashfs[0]: 2 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 2048
flashfs[0]: Bytes available: 15996928
flashfs[0]: flashfs fsck took 12 seconds.
...done Initializing Flash.
Boot Sector Filesystem <bs:> installed, fsid: 3
switch: dir flash:
Directory of flash:/
2 -rwx 22 <date> env_vars
3 -rwx 43 <date> system_env_vars
15996928 bytes available <2048 bytes used>
switch: set
BAUD=115200
BOOT=tftp:c3550-ipbasek9-mz.122-44.SE6.bin
switch: copy xmodem: flash:c3550-ipbasek9-mz.122-44.SE6.bin
Begin the Xmodem or Xmodem-1k transfer now...
CCCCCCCxmodem:: I/O error
Help would be really apreciated.
Thank you.
Marius.

I am using Hyperterminal and a regular serial cable. Right now I am working on a 2950 Cisco Switch
At the switch: prompt, I typed:
copy xmodem: flash:filename.bin [ENTER]
As soon as you see CCCCC in the terminal window.....
In Hyperterminal, from the tool bar, select Transfer -> Send File
Browse to the file, select Xmodem from the dropdown menu and select SEND
After the process has finished, type en and then boot flash:filename.bin
This will boot the .bin in your flash directory. The previous post only boots the switch that one time until it turns off. It does not put the image in the flash directory.
-->I dont know why it has to be done this way, but this was a bare to figure out. Nothing works like its suppose to though.
-This process will take a long time. Couldnt get a faster speed then 9600

Similar Messages

! Error when copying song from Purchased to IPod play list. How to fix?

! Error when copying song from Purchased to IPod play list. How to fix?

Hi
Try the iPod for windows forum http://discussions.apple.com/forum.jspa?forumID=826
Tony

Error when copying items from one table to another

I am trying to copy data from 2 archive tables within an
Access database to their twin production tables. The first table
copies perfectly with the code:
<CFQUERY NAME="moveArchAttach" datasource="faaco2">
INSERT INTO tbl_Attachment ( PostID, Attachment, AttachNote,
AttachName )
SELECT tbl_Attachment_Archived.PostID,
tbl_Attachment_Archived.Attachment,
tbl_Attachment_Archived.AttachNote,
tbl_Attachment_Archived.AttachName
FROM tbl_Attachment_Archived
</CFQUERY>
However, when trying to use similar code on the other table:
<CFQUERY NAME="moveArchPost" datasource="faaco2">
INSERT INTO tbl_Posting ( Title, FirstName, LastName,
PhoneNumber, RoutingSymbol, Email, IniDate, ComDate, SOLNBR,
PhaseCode, ProcCode, Posting, Password, RegionCode )
SELECT tbl_Posting_Archived.Title,
tbl_Posting_Archived.FirstName, tbl_Posting_Archived.LastName,
tbl_Posting_Archived.PhoneNumber,
tbl_Posting_Archived.RoutingSymbol, tbl_Posting.Email,
tbl_Posting.IniDate, tbl_Posting.ComDate, tbl_Posting.SOLNBR,
tbl_Posting.PhaseCode, tbl_Posting.ProcCode, tbl_Posting.Posting,
tbl_Posting.Password, tbl_Posting.RegionCode
FROM tbl_Posting_Archived
</CFQUERY>
I receive the error:
[Microsoft][ODBC Microsoft Access Driver] Too few parameters.
Expected 9.
Any help would be greatly appreciated, I am at a loss and
I've tried everything. Thank you.

I realized my error immediately after posting this topic and
subsequently have resolved this error. On 9 of the values, I have
listed the wrong table in the SELECT statement. This is why one
needs to take breaks instead of staring at a screen forever :).
Thank you anyway!

Error when copying songs from cd to hard drive

When I switched from a windows computer to a mac, I copied all of my itunes songs on to a data cd. When I insert the cd into my mac and try to copy the songs onto my hard drive, I get an error saying "Data Error (cyclic redundancy check)". I am pretty sure that you can copy as many songs, to as many computers as you want, but you can only authorize five computer to play the songs. Why is this error popping up? and How can I copy my songs?
Thank You, Margaret

"Data Error (cyclic redundancy check)"
This means the data on the disc is not correct (a bad burn). Try again.
Do you have an iPod or a USB stick.flash drive? You can transfer files that way.
I would not recommend burning them to an audio CD.
The songs were originally converted to AAC, thereby losing data (quality).
Wif you burn to an audio CD and then reimport as AAC, you will again lose data (quality).

Error when copying files from SSD to HD

Build 9926 (clean install not upgrade)
When copying file (drag & drop) from either an SSD>> HD or HD>>SSD I get the below error. This is definetly build specific and not hardware related. I have re-installed 9926 from an MSDN ISO 3x with the same results.
Both drives are local. Both drives have been checked and are ok.
Any ideas?

Hi Dyamixx,
Please consider to run process monitor to further look at this issue:
Troubleshooting with Process Monitor
After that, please upload the trace into OneDrive and then post the shared link here.
Best regards
Michael Shao
TechNet Community Support

Error when viewing documents from content server

hi all,
I have a question.
we have installed an SAP Content Server on Windows 2003 server, and have connected it to our SAP ECC 5.00 ERP. The purpose is so that documents that are attached to a transaction (through Generic Objects Services - Create Attachment), get stored onto the content server rather than the SAP database. We have done all the necessary configuration in oac0, oact, and SKPR08. We are able to attach a document to the transaction, and it gets stored onto the content server. Our issue is when viewing the attachment.
This is the error we are getting as soon as we try to view the attachment:
"Windows cannot find c:\documents and settings\<username>\SAPWorkDir\<filename>. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."
After pressing OK to the message, the system then gives this error:
"File could not be exported
Message no. SO315
Diagnosis
You have selected either the Export function or a PC document to be exported from the system. The file could not be exported to the
PC. Possible reasons:
1. The file is already open and is being used by an application.
2. The directory to which the file is to be exported is write-protected.
Procedure
In the first case, close the application.
In the second case, remove the write-protection attribute from the directory or enter another directory."
Why is the system trying to open the file from the user's C:\ drive?
Does anyone have a solution to this error?
Cheers,

Hi Aleem,
Refer to below KB & note, this should help you.
1849203 - Error message Database error for <GET DATA FROM KPRO> (SO013) and/or File could not be exported (SO315) when opening a document in Attachment list
764972 - Errors when creating workflow attachment
Regards,
Ravi

Error when passing data from app server...

Hello Experts,
I am encountering an error when trying to pass data from application server
to my internal table. Below is the error:
"You cannot convert the character set"
Hope you can help me guys.Thank you and take care!

Hi ,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures. The code is base on uploading a simple txt file.
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Reward points if it is usefull ..
Girish

BSP Error when copying text from email to Note section of a transaction

Hi All,
We are using CRM2007 for both the Interaction Centre and Sales Web Client.
When a user is creating a transaction in both roles, if one copies a piece of text from an email into the note section of a transaction at times the web client crashes and gives a BSP error.
It seems that cetain symbols are not recognised and cannot be converted when they are copied into the note section. The symbols I have noticed this to occur on are the dash symbol and the apostrophe (') symbol.
The symbols are fine when they are typed in directly, the issue only occurs if they are copied in.
The web client cannot handle this exception and falls over as a result.
However, if the text is copeid into the note section of a transaction in CRM online, any symbols it cannot convert correctly automatically convert to a hash (#) symbol.
Has anyone come across this issue before? Or have an idea as to how it could be resolved?
Even if it was possible for the webclient to convert any unknown symbols automatically into a hash (#) symbol like CRM Online so the web client would not fall over on save of a transaction.
Your help would be greatly appreciated.
Thanks,
Jonathan

Hi Inderjeet.
Thanks for the reply I guess we could not get the fiddler trace as we are getting this error while i am copying the data to excel file which is present on drive from SharePoint this is not on a browser. Correct me if I am wrong
And Alternate access mappings and IIS bindings are perfect.
Thanks,
Neela Krishna.

Error when copying code from one file to another

This bit of code works perfectly well in a test file with a single button:
var link:URLRequest=new URLRequest("http://www.mywebsite.ca");
buttonName.addEventListener(MouseEvent.CLICK, onClick);
function onClick(event:MouseEvent):void{
navigateToURL(link);
... but when I copy it into the file I'm working on, which has no other actionscripts or buttons, just a lot of animation I get this compiler error:
Description: '{' expected Source: function onClick()event:MouseEvent):void{
Description: Unexpected '}' encountered Source: {
Any ideas?

According to your error message, your onClick function declaration line closes the parenthesis twice... you may have a typo in what you actually put in the file versus what you think you put...
function onClick()event:MouseEvent):void{

Error when importing metadata from sql server

Hi,
I am having problem connecting to SQL Server. from OWB.(my owb client is 11.1.0.6.0 and owb repository is 11.1.0.1.1)
I am using Oracle Database Gateways 11g Release 1 (11.1.0.6.0) to connect.
i make all the configuration for the gateway .
and execute the dg4msql_cvw.sql to create corresponding views in sql server ...
THe dblink allows me to run SQL query from sql plus to the tables in SQL server (the host that i want to import data from is i sql server 2000).
When I test the connnection from owb to SQL Server it returns "successful"
but when i go to import the meta data of tables in SQL Server i get this error.
ORA-00942: table or view does not exist
[Oracle][ODBC SQL Server Driver][SQL Server]Invalid object name 'V$VERSION'.[Oracle][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared.
ORA-02063: preceding 2 lines from FIN_LINK
owb looking for v$version in sql server and i dont know why .
i tried to create this view in sql server like this
create table v$version (banner varchar(20))
but i dont know what kind of data should i insert in ,,,,,,,
is there any idea how can i fix this
thanx

thanx dallan for replying
i really execute that script u talk about and i mentioned that in first post ...
its' dg4msql_cvw.sql script and its make a views in sqlservere
its create these views :
ALL_CONS_COLUMNS
ALL_IND_COLUMNS
USER_CONS_COLUMNS
USER_IND_COLUMNS
... i r execute it as following : i have windows server 2003, the sql server 2000 installed on this server
i open the query analyzer and connect to the user that hold the db, i select open and browse to the dg4msql_cvw.sq
and then execute ... but still same error
i think this may works ..right?
and this is the trace log file :
note :
here are the trace log file :
Oracle Corporation --- TUESDAY MAY 05 2009 12:44:14.846
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- TUESDAY MAY 05 2009 12:44:14.846
Version 11.1.0.6.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "On"
RC=-1 from HOSGIP for "PATH"
PATH from environment is "D:\app\OraGtw\bin;D:\app\product\product\11.1.0\db_1\bin;D:\app\BI\server\Bin;D:\app\BI\web\bin;D:\app\BI\web\catalogmanager;D:\app\BI\SQLAnywhere;D:\app\product\product\11.1.0\db_1\jdk\bin;D:\app\BI\server\Bin;D:\app\BI\web\bin;D:\app\BI\web\catalogmanager;D:\app\BI\SQLAnywhere;D:\app\product\product\11.1.0\db_1\jdk\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using SA as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
##>Connect Parameters (len=209)<##
## DRIVER=Oracle 11g dg4msql-OraGtw11g_home1;
## SERVER=web02;
## Database=acc-aeu;
#! UID=SA;
#! PWD=*
## AnsiNPW=Yes;
## QuotedId=Yes;
## IANAAppCodePage=2252;
## ArraySize=100;
## PadVarbinary=0;
## SupportNumericPrecisionGreaterThan38=1;
SQL text from hgopars, id=1, len=25 ...
00: 454C4553 2A205443 4F524620 5622204D [SELECT * FROM "V]
10: 52455624 4E4F4953 22 [$VERSION"]
hgopars, line 347: calling SQLNumResultCols got sqlstate 42S02
plz guys any ideas ???

EVDRE encountered an error when retrieving data from web server

Hi
When I am trying to open Data Input=>Build a schedule using a dynamic template in BPC version for SAP netweaver, I am getting the below error "EVDRE encountered an error retrieving data from the Web Server".
I am not able to open any template, every time I am getting the same message. I have tried again after reprocessing all the dimension.
Even I have tried in appset APSHELL also, there also I am getting the same error
Request you to help me to resolve the above error which will allow me to proceed further.
Thanks in Advance.
Venkat

Hi,
Beside Nilanjan's solution, this error could also occur when the expansion is running more rows than the Excel limit allows (65'000 rows and 256 cols for Excel 2003)...
Even when you're using suppress field to reduce the number of rows, the first sequence is to retrieve the complete dataset before performing any suppression. And this could of course exceed the limit sometimes.
Hope this helps.
Kind Regards,
Patrick

FM 10 - Serious Internal Error When Copying/Pasting

We regularly encounter a serious internal error when copying text from one FM doc to another. We also get the error (occasionally) when we run FrameScript. Does anyone know what could cause this? It appears to happen randomly (i.e. it doesn't appear to be tied to one particular .book or .fm file). We use FM 10, Windows 7, 64-bit OS, and have 4GB of RAM installed. Help please!

We have version 10.0.2.419. There is nothing out of the ordinary with the content except that it is typically in track text edits. We cannot reproduce the crash on demand. It seems to happen randomly and to some users more than others.

Unknown error when copying any object from Illustrator to Photoshop

When trying to copy an object from Illustrator CS5 and paste it to Photoshop CS5 on Windows 7 I get the the following error when I switch from Illustrator to Photoshop:
The operation cannot complete because of an unknown error. [pdf!]
This only happens between Illustrator and Photoshop - copying an object to InDesign works fine.
I deleted the full Adobe preferences folder on D:\Users\[username]\AppData\Roaming\Adobe but that doesn't help.
Am I the only one with this issue?
Q

There's definitely something wrong.
Have you rebooted your machine recently?
I'm on a Mac, so maybe something happens on Windows that I'm not aware of.
Let's see if anyone on a Windows system has any ideas.
Anyone?

Run-time Error '429' when copying queries from one userid to a new userid

Hello,
One of the users is having an issue when copying queries from an old user id to a new user id.
She is getting the visual basic run-time error '429' - active x component can't create object while copying.
This is not consistent. From what I can tell, this does not appear to be a bex query designer issue but something in microsoft.
Please let me know either way. I have found minimal posts on this issue. Most that I have found are outside the sdn forum and talk about registry issues?
Thank you,
Lynda

According to your error message, your onClick function declaration line closes the parenthesis twice... you may have a typo in what you actually put in the file versus what you think you put...
function onClick()event:MouseEvent):void{

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

Xmodem I/O error when copy IOS from tftp server

Similar Messages

Maybe you are looking for