Copying Attachment(s) to Another system

I would like to be able to transfer Order attachments from SAP to another system. This can be done via FTP or Email.
Any help would be appreciated!

hi
when an order is created, you can configure an output type to send an email, and the order will be mailed, is that what you are looking for
cheers

Similar Messages

Clipboard issue- Automatically copying content past into another system across the network.

Hi,
I am facing issue related clipboard in all windows platform in our organization. Say example: Person A copying something from any application or browser in his system and when he is going to past into another apps(word file or text file) in the same system,
its pasting some other text content, which is copied in another system, which is using by person B. Again Person B when is going to copy and paste something in his system, pasting content is from person C's system. It is happening in all system in our organization.
It is very terrific problem, which is seen first time in my life. It is happening intermittently in all system.
Our organization is mainly R&D and software development company, Developers using windows clipboard in local system, but not
in another system thru n etwork or LAN. I have installed updated windows patch, Forefront antivirus in all system and also run scan. Not found any virus. We are continuously trying to identify the issue. Yet we did not get any solution.
We are enterprise customer of Microsoft and we using many enterprise solution of Microsoft. I hope any one can help me on the same.
Thanks,
Nirupam Dandapat

Hi Nirupam,
This is weird. Please disconnect the network from these computer to check if they work fine.
This is also might be caused by some third-party software conflict. In such situation, I would suggest you perform a clean boot in Windows clients to rule out the cause of third party programs.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support

Copy Web Dynpro to another system - no transport

Hello
is it possible to copy a web dynpro to another system without using a transport? I know that i can simply copy and past the code of the methods but what about the layout, the context nodes, views, windows, .....
Thanks in advance
Fabian

and you need the Webdynpro Plugin from here:
[saplink-plugins|http://code.google.com/p/saplink/wiki/pluginList]

Copy Enterprise service to another system.

Hi,
We have a requirement to copy an existing custom Service to another system.
Its a totally different landscape, So i don't mean to copy from one client to another.
Is it possible to do so?Can we download/Export?

and you need the Webdynpro Plugin from here:
[saplink-plugins|http://code.google.com/p/saplink/wiki/pluginList]

Why does my block diagram change when I copy my code to another system?

I am doing development work on a laptop on Win XP and using LabVIEW 2009 with service pack 1. When I copy the code to the target system, my block diagrams are changed and no longer fit the screen. Much of the code is spread out, mainly down. The target system is running Windows 7 and also has LabVIEW 2009, SP 1.
I notice that any constants that are clusters are expanded when copying the code to the other system. I've gone in and turned off the autosizing for these clusters but they are still expanded. I like to shrink them to a small size for saving space.
I've gone through and manually re-adjusted the block diagram on the target system, but when I copy it back to my development laptop, the same thing happens again. This is not an acceptable way to develop code and it has caused a real problem to proceed. I'm contracting this work and must develop this code offsite. Can anyone please help me with this? I can't keep restructuring my block diagrams every time I copy the code from one system to the other.

Windows XP used Tahoma size 8 as its basic system font. When MS came up with Vista, they changed it to Segoe size 9. I'm not sure what Win 7 is, but I think it is the same as Vista. That font change, and certainly font size change seems to be the underlying cause for block diagrams changing their appearance. (And for front panel controls and labels as well.)
LV seems to use the Windows system font as its default font. Interestingly, it seems like the font sizes in LV are something like size 12, 13, 14, 15. I think a size 9 is equivalent to a size 15, but I'm not sure about the comparisons. (Check out this thread.)
There are a few things you can do to try to make one system look more like the other.
1. Go into the Windows screen settings. In Vista, right click desktop, Personalize. Window color and appearance. Open classic appearance properties. Try changing the color scheme from Windows Aero, to something like Windows Classic or Windows standard. They both use Tahoma 8.
2. Or same as Step 1, but go further into Advanced button. Pick on any option that uses font such as Menu, Message Box, Active or Inactive Title Bar and change the font there. I'm not sure which of the items that has a font setting is the key one.
3. LV uses 3 fonts called Application, System, and Dialog. I think each of those map to one of those Windows options, but I'm not sure which goes to which.
4. In LV, Tools/Options/Environment has a subsection called Fonts. Those 3 basic LV fonts are selectable there. There is also a checkbox for me which is checked and says to use default. If you uncheck that checkbox, a Font Style button becomes enabled. You go in there and you can choose fonts and sizes. And the Application, System, and Dialog fonts as well as all the usual fonts names (Arial, MS Sans Serif, Greek, ....) are selectable along with fonts sizes. Play around in there. The whole section is very confusing, and I have no idea how it works. I recommend going to this idea A better way to specify (default) fonts and putting in a vote. Also this idea, Fix font behavior between windows versions, platforms & executables, deserves some love.
5. Some of these settings can also show up in your LabVIEW.ini file.
FPFont = "0" 15
BDFont = "0" 13 (I think the "0" means app font, "1" means system font, and "2" means dialog font)
Also,
appFont="Tahoma" 13
systemFont="Tahoma" 13
dialogFont="Tahoma" 13
(And if necessary, put these in your built application's .ini file)
As you can see, there are a lot of different things going on and they also seem to conflict with each other. I starting stumbling on the block diagram issue between working on my app on XP at work and on my Vista machine at home about 6 months ago. I think my problem actually started with the front panel when I was trying to align labels, and use some arrow head decals on boolean buttons. I think I did the customization of buttons in a couple different ways (because I did some, came back later to do others, and couldn't remember exactly how I did it.) As a result some decals looked different than others when I changed machines. And I swear going from XP to Vista, or Vista to XP the problem got both worse ways rather than let's say larger one way, and smaller the other way.
Replying to your message is about as much to me trying to combine all the pieces of knowledge I've stumbled across over the past months and year as it is for trying to help you. Hopefully, this information gives you some places you can look at and play with. (I bet #1, would be a quick, easy way to solve your immediate problem, but I haven't really tried it myself to be sure.)
I hope someone from NI who has a better understanding than me about these font issues could jump in and correct any mistakes I made, or add anything I might have left out. What we really need is some sort of "nugget" or National Instruments white paper that really explains all of this in ways we can use rather than us stumbling around in the dark doing things trial and error to figure it out. Generally, any changes to the .ini files require you to shutdown LV and restart it to take effect which can take a couple minutes. And considering all the various combinations of things that can be done above, your talking about dozens of possible restarts, and sending .vi's between two different PC's with two different operating systems, before figuring these things out.

Copy data from one SAP system to another based on conversion rules

Hi All,
Please provide your input on how can we copy data from one SAP system to another based on conversion rules.
Conversion rule :
vkrog in 110 vkorrg in 120
1234 4567
<<text removed>>
Thanks
Edited by: Matt on Feb 16, 2009 4:35 PM

Please read the Rules of Engagement here: Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Please note that offering points is against the rules.
matt

How to copy a table from one system to another system

Hi all,
can any one say how to copy table from one system(sys1) to another system(sys2).
regards,
nagaraj

There are many ways.
1. Use the already existing transaport request number for that table to do the transaport (Active)
2. Create mannual transport request from SE01 and in the object list enter following
R3TR -- TABI -- <Table Name>
And do the transaport.
3. Ask your basis consultant to do the transaport from oracle layer.
Thanks,

Is there any Program available to Copy a package from one System to Another

Hi all,
Is there any Program available to Copy a package from one System to Another ?
Thanks in advance
Raghu ram

Hi,
Put the Package into a TR using transaction SE80.
Provide the TR no. to BASIS consultant & ask him to provide the file of that TR.
Import the TR file in another system.
Thats it.
Best regards,
Prashant

How i can copy my transport request from one system to another system

hi,
i want to copy all my code means( programs,tcode,class,FM...every thing.) which is under a transport request, now i want to copy all this code same as it is in another system
eg.
i have all my objects in for example D10 now i want all my code in some another system for e.g in D30.
how it is possible....

Hi Vipin,
Check tcode SE03 for transport related issues.
as suggested by all the TR needs to be released from the current system to make it ready to be transported to next system.
Once you release the request ask your basis administrator to transport the request to D30.
<b>Before releasing the request check with the basis administrator if the target system has been set to D30.</b>
Lokesh
Message was edited by:
Lokesh Aggarwal

How to copy a database to another location in sqlserver 2008 express edition

Hi,
Please help for to copy a database to another location in sqlserver 2008 express edition
With many thanks
Pol
polachan

if you are using SQL Server 2008 express edition
you are NOT able to use Copy database wizard so the only option you have is to try as mentioned above
a) Backup /Restore
Create a new DB to where you want the copy should go and
Make a Full Backup with .BAK of your original database and Restore the backup on other system and Right click on the the new DB you created and Restore by navigate to your .BAK and make sure MDF and LDF file match the new.
http://msdn.microsoft.com/en-us/library/ms190436.aspx
b) Detach/Attach
Detach the database and copy the database files to other system; and attach these database files.
I hope this is more informative for you and Good-luck
Please remember to click “Mark as Answer” on the post that has answered your question as it is very relevant to other community members dealing with same problem in seeking the right answer

Errors have occured while transferring the document into another system.

Hi GURUs,
Please help me to come out from this problem........
An error has occured in the system YDQCLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Refer to the attached log for error messages.
Transmission log
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Please suggest something ASAP....
i'll be highly Grateful to you.....
Regards,
Ankur

Hi Gangadhar,
Can you plz explain me elaborately, where should i check for partner function of the equipment and how this partner function is related to this issue.
I think partner function will be there only for BP. Can you plz clarify me.
Thanks in advance
Ankur

How to export a Webdynpro java DC, for reuse in another system

Hi Everybody,
I am having a Webdynpro Java DC, i want to give that DC to another person to import into his system and work. i am doing a export of that DC and creating a zip file. But when we are trying to import it in another system, it is giving errors. When trying to build, its not showing DC options at all, DC-> buid or deploy options are not visible, when right clicked over the DC.
Am i doing it in a wrong way. Can anybody help me.
thanks & regards,
Ravi

Hi Ravi,
Are you working with local DC?
Then you can take ur dc in the following way..
Find where the dcs are stored in ur system..
<Some File Path> .dtc\LocalDevelopment\DCs\<your dc package>\
There will be a folder with your project name.
Copy that folder and Paste in the other system under the same folder structure.
ie., the copied folder need to be pasted here
<Some path> .dtc\LocalDevelopment\DCs\<your dc package>\
Once you copied,Open your NWDS and go to DC perspective.In the Local DCs.
Go to Local Development -- > My Component
Right Click on 'My Component' and click on 'Refresh'.
Your new project will appear under the 'My Component' hierarchy.
Right Click on your project and Choose 'Create Project'.
Now Proper dc will be available for you to work on.
If you are facing any problems, let me know.
Best Wishes
Idhaya R

How to download GUI status and then upload to another system?

Hi,
I have a requirement to copy a module pool program to another system (different system, it cannot be transported to that system)
We have options to download/upload programs/screens in SE38 and SE51. But, I couldn't see any such option in SE41.
Is there any other way to download GUI status from SE41 and then use that file to upload in other system?
Thanks in advance.
Regards,
Arun Mohan

Hello Arun,
If the object's transport order has been released, you can ask your basis person to download and import that request files(Co file + Data file) from the current system to the new system.
This is the easiest possible way to achieve your requirement.
Regards,
Karthik D

Customizing table Changes to another system

Hello all,
When ever changes occurred to personnel area HR table T500P then the changes needs to be replicated in another system.
how to capture the change log details?
Please provide the inputs.
Regards
Aravind

Hi,
First : In the table T500P , some of the field data elements dont have change log checked. so we will not able to use CDHDR and CDPOS table. I have to capture all the changes for this table.
Second: technical setting of the table has data log change check box is ticked but SCU3 is not activated . so this one also we can't use .
Third: Transporting data from on system to another system:For this there is no T500P table exist in the SRM system.
could you please elaborate how to use this step?
Fourth:
1. creating Ztable as copy of T500P and update the ztable with T500P data.
2. write events for this table to update T500P and also trasfer the data.
but thing is we should have to maintain custom table . If T500p changes then it will not update the ztable.
Fifth: I came to know that there is one message type "CONDA2" for Synchronizing Customizing Data Between Systems.
but don't know the procedure to get the complete solution.
Please provide your inputs..
Regards
Aravind.

We need how to copy macro logic in the system

Hi Experts,
we need how to copy macro logic in the system, we have some macros in my friend system, i need how to copy macro logic , can u send me elaborate.
Regards,
BABU

I'm a bit uncomfortable with you've wanted to do especially you and your friend has a different system (unless its a sister company/industry). If this would be the case you can copy your friend's macro with the help of your basis team to transport them in one system to another.
if the case is different organization, I'm not sure if that is possible since no industry have same requirements but i may suggest the links below for your reference on how to copy the Macro into external system. Hope the document is relevant to your issue.
[http://help.sap.com/saphelp_scm41/helpdata/en/82/2101fac5288f4d8c7be7c20e604a8f/frameset.htm]
Cheers!

Copying Attachment(s) to Another system

Similar Messages

Maybe you are looking for