Corrupted icons in stack view

If I drag a new application into my Applications folder and than open the Applications stack on my dock the icon for the program that I just put into the Applications directory usually shows up corrupted in fan, grid and list view. It shows up as a blank icon with a circle/slash through it. If I reboot the system it shows up properly. Extremely annoying. Does anyone else have this issue?
Here's a pic of what I mean.
http://img168.imageshack.us/i/iconx.png/

I see the same behavior. in fact, I see it on my leopard systems too. not sure what's going on here. seems like a bug to me. but you don't have to restart to fix it. just recreate the Applications stack and the icons will display correctly.

Similar Messages

I accidentally deleted the download stack, but managed to get it back. How can I change back to stack view?

I accidentally deleted the download stack, but managed to get it back. How can I change back to stack view?

Right-click on the folder icon on the dock where you put it. Change it from 'Display As: Folder' to 'Display As: Stack'.
After that you'll be all set.

Corrupted icons in Finder and Mail

My icons for files and folders often get corrupted as shown here:
http://www.math.uni-hamburg.de/spag/dm/corrupted_icons.pdf
The problem is cured (temporarily) by a reboot, but not by relaunching the Finder. Strangely, the problem "spreads" like an infection: at first, only the icons in one folder viewed in the Finder are corrupted, then quickly more and more get corrupted. The bad icons even infiltrate some applications, like Mail - see the bottom two icons in the rightmost screen shot of the link. When a single file has a bad icon, I can "delete" that icon in the info window for that file, and it reverts to normal. This does not seem to work when the corrupted icon is that of a folder.
I have a suspicion that the problem tends to spread from "old" files (never folders) that pre-date OSX. But that's not much more than speculation, since many of my files are of that type. Also, the problem has spread to other macs that I "migrated" to from the one originally affected.
Any help at all - such as suggestions of how to cleanse my Mac so that this does not reoccur - would be greatly appreciated...
Sandy

The problem is still not understood, but it seems I've been able to get rid of it. Many years ago (quite possibly still under OS9) I had given some folders special icons to make them stand out visually. I then put those folders in the toolbar of the Finder window (even now under Leopard, where dragging folders to the toolbar no longer seems to be officially encouraged but still works). In search of "anything unusual" to do with icons I now removed those pictures from the folders in their info field (so now they look normal again, like any other folders), and haven't had any more corrupted icons since. This has now been stable for about a fortnight, while before this measure I had newly corrupted icons about twice a week at least.
Caveat: I didn't remove those custom-made icons from all my folders: I simply forgot two of them (which, however, were changed later I think). So even if restoring generic icons to some folders solved the problem, the problem will most certainly be difficult to reproduce.

Missing speaker icon in list view in iTunes for Windows

On my Mac I can see a speaker icon in list view of iTunes, but in iTunes for Windows 7 I cannot see the speaker icon that shows now playing against the song playing in list view - anyone help how to switch this on?

..same problem here!
Solution:
in the View Options: Arrange by has to be set to none
Message was edited by: Andy_M

How to add Icon in Tree View in Forms 6.0 (URGENT..!)

Hello All,
I want to add icons in tree view (hierarchical tree) by using
forms 6.0.
So pls. help me to find out the solution for the same.
thanks
Pradeep
null

Pradeep (guest) wrote:
: Hello All,
: I want to add icons in tree view (hierarchical tree) by using
: forms 6.0.
: So pls. help me to find out the solution for the same.
: thanks
: Pradeep
hello pradeep,
for adding icons in the tree, u willhave to look closely to the
data format for the tree.in the data format used for populating
the tree we are supplying 5 fields. the state of the tree node
(expanded or collapsed), the depth of the node w.r.t the parent
node, the node value, the node label(what we see on the tree)
and the node icon which we want to use. for the node icon we
have to provide the entire path of the icon file. that's it.
hope this will solve the problem
null

Icon for quick view in finder

I can't see the icon for quick view in the finder-bar in the Leopard? How do I turn it on?

If you go to View > Customize toolbar you can drag the quick view icon (looks like an eye) to the toolbar in the finder window.

I need to change just an icon in a view

I am new and I can just do it by JS but this view is in HTML, does anybody know how to add the attribute or the name of it to set the new icon to this view?
thanks.

Hi Jordan,
The correct view name is J_1BT001WV and not J_1BT001W. It is made of table joins - T001W T001K T005. Please let me know if this answers your question.
Regards
Ram

Applying star rating/color label to "Current Pick" in Stack View mode

Is it possible to apply a star rating/color label to the "Current Pick" in Stack View Mode? Thanks.

is there a way of applying both the five-star rating, AND the green color label at the same time, with one keyboard shortcut, or otherwise?
If you need to do this in exactly one action, then I don't think there is a way to do this. Of course, if you want to accomplish this in two actions, you can select all the 5 star images, and then apply the Green color label to them all in one step, but that isn't what you asked for.
Is there any way to make my five-star rated photos more visually prominent in the grid view?
Not that I know of
ANother thought is to create a smart collection of your 5 star images, and then you can use the smart collection to view the 5-star images (none of the other images will appear)

Imported cd generates 3 identical icons in album view. First icon has 10 songs. Second icon has 1 song, and third icon has 1 song, How do I combine the three identical icons in album view.

When I import a cd, itunes generates three album icons. The first icon, in album view, has a picture of the cd and 10 of the 12 songs on the cd. The second album icon has no picture of the cd, but a picture of two eighth notes tied together, and has one of the songs from the cd on it. Same thing with the third album icon. No pic of cd, but the two notes, (musical notation) and it also has only one song from the cd on it. (different from icon 2.)
I would like to know how I can combine all three icons into one icon.

Same thing happens to me. It happens also when I add to library from HD. I've already checked all info and couldn't find anything different that could justify this behavior. The funny thing is that sometimes (sometimes, only) I just delete the tunes (removing from iTunes AND moving files to trash), add the files again and everythig is ok.
I've noticed, also, that using TuneUp Media may, sometimes, solve this issue. I just drag the albuns to TuneUp Clean area and issue solved...
I just can't understand why this is happening...
I also use iMac (late 2009) with Mountain Lion (10.8.2)

How to rate first image in stack view?

I am looking for the way to rate the first shot in stack view. It is outlined in yellow and the "selected shot" is in white.
Even right clicking on the actual photo and trying to change the rating only makes the rating on the "selected" shot.
What if the first shot is the best? What if I don't want to rate all of them or change the others?
How do I rate the first shot without getting out of stack view or without changing the order?

Sorry, but if I understand the program (which I may not) you cannot. By definition, the first image in your stack is your "pick" and therefore a "5". Maybe none of the "pros" that Apple consulted ever needed to use a shot that was less than a "5". I guess its only the incompetent few of us (like me) that ever needed just to make the best of an indifferent group (thank you Photoshop).
You might try not rating any of the group at all (haven't tried), at least your "pick" wouldn't be a "5".
Kidding aside, I would like to be able to accomplish the same thing. Ideally, a pick should be different from a rating.

"Soft Crashes" in Stacks View

At some point almost every time I use Stacks View to make picks- which is often- I come to a point that I would call a Soft Crash. I've been experiencing this for quite some time, and I'm just now getting around to posting it.
It usually happens when I hit Command+Back Slash to elevate an image to stack pick. The interface remains active: I can cycle through views, exit Stacks View Mode, select other thumbnails and access the menus; but the same images remain displayed on both displays. When I exit Stacks View Mode, the green outline disappears on the primary monitor but remains on the secondary monitor. Still, I cannot change what is displayed or do any other work. Also, the thumbnails will show my new stack pick, but the viewer will show the images as they were before the key stoke.
The only thing I can do to get out is to relaunch the app. Usually no force quit is required, but this last time it hung while updating previews. Also this time, I found I had left Dreamweaver and Safari running in the background. Of course, Dreamweaver isn't always present when this happens, but I'm far more likely to forget to quit Safari. I'll have to see if it ever happens w/o Safari running. (I do make an effort not to have Safari running in the background as some contributors say it causes problems w/A3)
There are no steps I can execute to replicate this. It just seems to happen after working in Stacks View for a while.
DLS

My guess is it's some combination of dual monitor and full-screen. I've experienced very similar behavior just labeling or rating images. My working hunch (i.e.: I have not looked into this -- I just avoid it) is that somehow Aperture loses the input made on one of the two active monitors.
Do you ever experience the problem when launching with and using only one monitor?
Added: as for Stacks mode, I've seen regular peculiarities when rejecting all but one image in a Stack. I put Stacks mode in the same basket as some other shiny Aperture gems: cut but not yet polished.
Also added: More voodoo: I thought I had traced a problem to having Safari in the background, which may or not be the case. The one thing which seems to really help keep a good installation running smoothly (on my machine) is turning off "Share Previews with iLife and iWork".
Message was edited by: Kirby Krieger

TS1702 Why is the icon for street view not showing up on the left side of the location on the maps app?

Why is the icon for street view not showing up on the left side of the location on the maps app?

Because the included Maps app no longer gets the maps data from Google, so no more street view.
You can get a free Google Maps app from the iTunes App Store.

Stacked Views

I have a stacked view which is smaller than the view it overlays and I'm wondering if there is a way to gray out or disable the underlying canvas when I show my stacked canvas?
Any help would be appreciated.

Hi.
I dont think this is possible. What you could do is instead of creating stacked canvas, to create content canvas an put it on to the new window set as Modal.
Best regards.

Icon in tree view control

Hi all
       I want to display an icon in tree view.These icons must be displayed before the node.for this purpose i am using below code.But i didn't find the icon in my output.Please help me to do this.
Thanks in advance.
REPORT ZTREEVIEW_TEST_PROGRAM no standard page heading.
Type-pools : fibs,stree.
data : t_node type snodetext.
data : node_tab like t_node occurs 0 with header line.
clear : node_tab, node_tab[].
node_tab-type = 'T'.
node_tab-name = 'Earth'.
node_tab-tlevel = '01'.
node_tab-nlength = '5'.
node_tab-color = '4'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
node_tab-NODEICON = 'C:\Program Files\SAP\FrontEnd\SAPgui\bitmap\l_b_odsa'.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Europe'.
node_tab-tlevel = '02'.
node_tab-nlength = '6'.
node_tab-color = '1'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 4.
node_tab-NODEICON = 'C:\Program Files\SAP\FrontEnd\SAPgui\bitmap\l_b_odsa.bmp'.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Germany'.
node_tab-tlevel = '03'.
node_tab-nlength = '7'.
node_tab-color = '4'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 4.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Berlin'.
node_tab-tlevel = '04'.
node_tab-nlength = '6'.
node_tab-color = '4'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Asia'.
node_tab-tlevel = '02'.
node_tab-nlength = '4'.
node_tab-color = '1'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'India'.
node_tab-tlevel = '03-'.
node_tab-nlength = '5'.
node_tab-color = '1'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Bombay'.
node_tab-tlevel = '04-'.
node_tab-nlength = '6'.
node_tab-color = '1'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
append node_tab.
clear node_tab.
CALL FUNCTION 'RS_TREE_CONSTRUCT'
EXPORTING
INSERT_ID                = '000000'
RELATIONSHIP             = ' '
LOG                      =
TABLES
    NODETAB                  = node_tab
EXCEPTIONS
TREE_FAILURE             = 1
ID_NOT_FOUND             = 2
WRONG_RELATIONSHIP       = 3
OTHERS                   = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA: type_mapping TYPE stree_ctl_type_mapping_tab.
DATA: wa_type TYPE stree_ctl_type_mapping.
CLEAR: type_mapping[].
    wa_type-type = 'A'.
    wa_type-icon = '@BL@'.
    APPEND wa_type TO type_mapping.
CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
EXPORTING
LAYOUT_MODE                     = ' '
   USE_CONTROL                     = STREE_USE_LIST.
Regards
Giri

Giri,
you can use SAP standard icons only - see table ICON and include TYPE-POOLS: icon in your program.
If you can't use standard icon, it will be more complex.
Regards,
Clemens

Networklocation corrupt icon change to white paper

For our colleagues we made a network locations to SharePoint.
some colleagues are complaining about corrupt networklocations. The networklocation icon changing to a white paper and is doing nothing.
i did try to reproduce the problem but i wasn't able. the next morning when i opened my pc an networklocation was corrupt.
the only fix i know is removing the networklocation and add it again.
this way i made the network location
http://support.microsoft.com/kb/2616712
Sign in to the SharePoint Online site by using your Office 365 credentials. Make sure that you click to select the
Keep me signed in check box.
Open a document library in Explorer View. For example, follow these steps:
From your Team Site, select Shared Documents.
Under the Library Tools section in the Ribbon, click the
Library tab.
In the Actions group, click Open with Explorer.
i did copy the URL and did use the URL to make a networklocation.
we are running windows 8.1 and office 2013.
internet explorer 11
trusted websites are added
and remember login is on
Kind Regards,
Arie Guijt

What changes were made to computer.
Any windows update installed on the computer? Check from add remove programs
Check below
http://community.office365.com/en-us/f/154/t/22511.aspx
I've been through much the same sort of pain as you describe - I tried using shortcuts on the users' desktop for them to access SharePoint via WebDAV but these fail to connect regularly unless the user has logged on through the browser. I followed all of
the instructions in KB 2616712 without resolving the problem. I raised a Service Request and the answer I received was:
=====================
• Issue Description:
• Problems accessing mapped SharePoint folders via WebDAV
• Issue Resolution:
• This is a By-design behavior since SharePoint online in office 365 uses forms based authentication & the user is authenticated using SAML token as against BPOS where windows authentication method was used.
• This SAML token expires every 2 hours & after that the mapped drive for SharePoint library cant access the resources unless the user signs in to the site again from the browser.
• At this point we don't have a possible solution to this however this issue is in the knowledge of our Operations team & they are working towards a solution. We don't have ETA for the same though.
• You can develop a custom application that would authenticate the user against sharepoint site without having him to open the browser & sign in. The following article may be of help in doing so.
www.wictorwilen.se/.../How-to-do-active-authentication-to-Office-365-and-SharePoint-Online.aspx
If this helped you resolve your issue, please mark it Answered

Corrupted icons in stack view

Similar Messages

Maybe you are looking for