Cost Center Issue

Hi All,
I need to change the reports to relationship of an org unit A from Org unit1 to Org unit 2.
Now When I go in Po10 and change the reporting relationship for org unit A I get the message
"Entry is not allowes due to differenet cost center and person".
Now i checked in the table for cost centers and company codes and figured out that Org unit A belongs to a diffenet cost center which is tied to Singapore Comapny code and Org unit 2 belongs to US company code.
So I cant do the reports to relationship in OM because of diff cost center assignment to diff company codes.
But, We have a case in the system where org unit P in Japan with diffent cost center reports to Org unitQ in US with diffenent cost center.
I was just wondering how this relationship had been maintainned because here also we have diffenrt cost centers attached to different company codes. Then why is not possible in my case when i am trying to change rel for singapore orgunit to US org unit.
I checked from PA side also, No special transfer action has been run on the employees belonging to Japan cost center.
Can you please help me in solvingthis.
How can i change the reports to rel w/o running any action on PA side?
Regards
Aryan

Hi Experts,
I have checked in Quality system, it allows me to move org unit japan under  (reports to) org unit US, having diff compnay codes and diff cost centers.
But same is restricted in Prod and it gives me error that company codes and cost center are different,so I cant move org unit japan to report to org unit US.
How is config done. Where do we configure this.
Pls help me
Reagrds
Aryan

Similar Messages

  • Cost  Center Issues

    Dear Friends,
    we have one Cost Center like 147520100 - HO F&A Dept   period 1.1.1900 to 31-12-999.   but this month we have changed the Description of this cost center to Account Dept  via Tcode OKEON.
    But  when we seeing Tcode KS03 
    147520100  - HO F&A    Valid From  01-01-1900 to 31-12-2011
    147520100 -  HO Accounts Dept   Valid From 01-01-2012 to 31-12-9999.
    we want to show only one.. because its creating confuse at user level...   we want to restrict this  or i want to back which was in earlier...
    please advice...
    Regards,
    Rajesh G

    Hello
    Delete the cost center with new validity. This will be possible if there is no posting done.
    As I said earlier in your case the description is maintained as time based field. For any change in time based field the system will create new validity periods. If you do not want this field to be time based then remove the tick for field "KTEX"' in T.Code OKEG.
    After this any change in text will not create a new validity.
    Sangram

  • F.50 / Cost Center Issue

    Hi Guys,
    When we are running F.50 transaction for P&Loss Adjustment,
    The error appears when processing the batch input job SAPF181( for F.50 ).
    The batch input job stop under processing and show errors (CostCenters required) u2013
    all CostCenters are entered manually when processing batch input in foreground u2013
    and processing continues when all CostCenters are entered.
    The CostCenters should be generated automatically by the batch input job.
    How can we do this..
    Thanks
    srik.

    Hi,
    You need to enter cost center at the time of posting in FB50 then try to execute in batch.
    you can also define default cost center in OKB9.
    Regards,
    JA

  • Invoic01 cost center / posting key

    Hello gurus.
    We are implementing a new process which requires us to use inbound IDoc INVOIC01.  These invoices don't go against any purchase order or other pre-existing documents -- they're expense reports from our various employees.  I think I have everything setup correction but I'm having two issues:
    1) Posting keys:  In transaction F-43, we use posting key '31' for the first item and '40' for all others.  Where should this be in the IDoc?
    2) Cost center: Similar to posting keys.  We have a cost center on our inbound application for each line.  Where should this be in the IDoc to map properly?
    Thanks in advance for any help!!

    Ok, I figured out the cost center issue (thanks to OSS note [150120|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=150120]).  Now I just need to figure out how to handle the posting key.  I have setup transaction 'OBCE' but I'm still missing the first value (from first screen of transaction 'F-43' for example).
    Thanks in advance for any help!

  • Cost Center assign Profit Center Issues

    Hi Controlling Expert,
    i have one issues regarding, Cost Center assign to Profit Center
    wht happened , we have made MIS Report Thru Report Painter KE80, we have map based on   Primary Cost Element, at the time of Business Transaction, we have capture the Finance Cost center i.e FI000, Marketing Cost center i.e MK000 , HR Cost Center i,e HR000 and assign the same cost  center FI000 to Profit Center i.e FI000 also same name, respectively. in MIS report there is two Head  i.e Sustaining Cost and Development Cost ,where we have to capture only Cost center  for Sustaining Cost related  to display i.e FI000, MK000 and HR000. KE80 report belongs to Profit Center wise you can see the Report. But same FI000, MK000 and HR000 also updated related with business transaction and capture above cost center like in depreciation  GL Amount 1000 cost center FI000 and sustaining cost also updated the same amount 1000 because we have assign FI000, i.e wrong . last 3 months post the amount now wht should I do for not updated sustaining cost, as I understand , should be delete sustaining Cost as well Development, and later on we can take report from KSB1 for FI000, MK000 and HR000, for management purpose, so if I cannot assign profit center FI000 to Cost Center .kindly correct me whether ryt or wrong. Coz Fianance, HR cost and marketing is only cost center. not suppose to assigh profit center, in this case how Profit Center removed from Cost center. kindly let me knw, or give me other option.
    wen we see the report same Profit Center showing two times along with amount i.e wrong coz of Sustaining Cost we have assign Profit Center
    in this report particulars are Below
    Revenue  : Relevant GL ( At time of Business Transaction we have captured the Relevant Profit Center i.e Finished Product i.e R100: RA Tube
    and RA Tube R100 assign with same Cost Center R100.
    B.Material Cost : Relevant Primary Cost Element
    Manpower      : same like Above
    2.Energy            : same like Above
    3.Consumption   : same Like Above
    Conversion Cost (1+2+3)
    Sustaining Cost   : Here we have given Profit Center i.e FI000, MK000 and HR000 these profit center assign 
    Development Cost : Here we have given profit Cente EN000
    Profit      (A-B-C-D-E-F)
    G.Depreciation : Relevant Primary  Primary Cost Element
    Financing Cost : Relevant Primary Cost Element
    I. Other Income/Loss : Relevant Primary Cost Element
    PBT : (F-G-H-I)
    Kind regards
    Pranav Kr. Gupta
    SAP FICO Consultant.

    Hi Pranav
    You are logging same issue twice. I didnt see any difference in the two threads though.
    If its the same issue, request you not to repeat this in future.
    KE80 report two times value effected
    Regards
    Mustafa

  • Cost center commitments reconcilation issue

    Hi,
    i have Cost Center Commitments Reconcilation issue.. one cost element values are not updating to BW from R/3 this is the issue we have .. RSA3 showing 0 Amount for that cost element.. i have tried to load upto PSA here also i am getting 0 values.. i have checked in table "COOI" i found the values for that cost element.. and also i have checked in ksb1 it is also showing the values... cost center commitments data source 0CO_OM_CCA_10 has no customer exist... could any one have any idea on this... what may cause the issue.....
    Thanks & Regards
    Sreekanth

    Hi,
    As per below the extractor is working fine. KSB1 displays the Actual Linte items and KSB2 displays the Commitments Line items. So the commitments extractor is working fine if the data matches with KSB2.
    DataSource 0CO_OM_CCA_9 will give you the actual costs and matches with KSB1
    Thanks,
    Nagarjuna.
    Edited by: Nagarjuna Reddy on Oct 20, 2011 9:07 AM

  • Restricting issue of goods to cost center with respect to material type

    Dear Users,
    I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any standard solution for this, please provide your suggestions.
    Thanks,
    Manoj

    Hi Ajay,
    Thanks for valuable input.
    I also thought in the same line , but user has the following concern on this:
    Assessment Cycle: As per Users, it cannot be used because this will allocate based on allocation basis. But they need, the values that was posted at the time of transaction and as per materials. So it wont be accurate through Assessment cycle,
    OKB9: They have different Cost center for different valuation area for the same GL Account.
    Hence through OKB9 also, we cannot post directly to COPA.
    That's the reason the above option were not adopted.
    My other concern to this is:
    In CKM3, we have two lines under consumption, one for Normal sales PGI and other is Cost Center.
    After doing revaluation of consumption in CKMLCP, we see one line under Cost Center :Revaluation of Consumption Figure"
    My question, where can I see that figure whether in any table or in Cost Center report??
    If that is also available we can try to match those values and post to COPA.
    Let me know your thought on this.
    Thanks and regards
    Kami

  • Batch not determined in MIGO-Goods Issue for cost center

    Hi,
    We are using Batch Determination while posting Goods Issue to cost center. However, when we enter * in the batch field system does not propose the batches.
    We have done following settngs
    Strategy type ME01 which is SAP standard
    Batch search procedure - ME0001
    Search procedure ME0001 is assigned to movement type 201 in "Allocate IM Search Procedure/Activate Check"
    Sort Rule - 01 using charecterstics (ascending)
    Class - BATCH_MASTER created
    Characterstics - Size, Shape, Color (No table or field are maintained in Addional Data) assigned to this class.
    Material is maintained with classification and batch management active.
    Master Data - Search Strategy is maintained using t code MBC1 for stratefy type ME01 (Key combination Movement Type/Plant/Material). Selection criteria - Values maintained for characterstics. Sort Rule - 01
    Now when we are issuing goods to cost center and enter * in batch field, system is supposed to suggest the batches (material is in stock and batches are available). However, system does not give pop up.
    Am I missing something? Where is the batch determination button as system is giving message to use button?
    Shekhar

    Thank you for the answer.
    It gives only one batch and not all the batches. Why it could be?
    Shekhar

  • Cost Center restriction while goods issue

    Hello Gurus,
    While posting the goods  issue, we need to enter the cost center in the account assignment tab.
    for that Cost Center, user should be enter his cost center which is allocated to him. system should give error if he enter worng cost center.
    How can i achieve this requirement?
    Thanks in advance,
    Laxmi.

    Hi,
    It is not really as easy as it sounds, especially if you want to have the default depend on the movement type etc.
    If the user always uses the same cost centre then try the parameter ID in the user master (doesn't always work). I have just tried this and the program doesn't appear to use the KOS parameter so this does not help.
    If the default cost centre is the same for everyone for the GL account then within FICO there is a transaction to have a default cost centre for each GL / Element.
    Steve B
    Message was edited by:
            Stephen Birchall

  • Where do I define the automatic posting of goods issue to Cost Center?

    Dear Experts,
    I found out that all the raw material consumed each time I do the confirmation of process order via CORK did not post to Cost Center.
    Where do I define the automatic posting to Cost Center for Goods issue for consumption?
    regards,
    Abraham

    Hi,
    I found out the default movement type has been predefined to 261 (GI for Order, in which it doesn't post to Cost Center).  I guess the standard system has a valid reason to set it as 261 instead of 201 (GI for cost center). 
    As far as I understand, the Process order will accumulate all the costs (direct cost - material, labour and machine hour and also indirect cost) during the confirmation (material is backflushed and fnished goods is auto-GR).  And at the end of the period, this process order will be settled its variance if there is (between the total cost credited - based on standard cost of the finished goods and actual total accumulated costs debited).
    So, my question is, by right should there be any CO posting being made to Cost Center for material consumption in the above process flow as I checked in the standard system, the material movement for raw material and finished goods have no Cost Center posting at all?
    regards,
    Abraham

  • GL account and cost center field appearing for Goods issue movt type 201

    Hi SAP Gurus
    We are trying to post goods issue in ecc6 . The problem is that the GL Account and cost center fields are available fields .The cost center field is logical but why the GL account field is avaiable .
    How we can grey out the same field as it is going to be picked up from the valuation class setting in GBB - VBR ? Any ideas
    Regards
    Hitesh

    Hi Ravi
    You think that its ok we have to input the cost center .
    But if you allow the users to input the GL then you are overriding the whole purpose of defining the valuation class and offsetting entries ? What is your opinion ?When you input the material in the goods issue screen the offsetting entry needs to be picked from the GBB -VBR .Although even if you do not enter the GL the system posts the Godds issue document .But from the control perspective this needs to be suppressed .
    What do you think ?
    I have also posted the same in Logistics forum .
    Once  again many thanks for your help .In case you find some solution this would be of great help
    Regards

  • Issue with Cost center in PO and Work Order

    Dear Expert,
    I am facing an issue with respect to cost center in Purchase Order and Work Order. The PO is made against a work order. There are two cost center associated with the work order. One is updated under u201CAdditional datau201D field and other is at u201Clocationu201D . So the cost center in PO should essentially be the same one mentioned under u2018locationu2019 field of work order. So the issue here is that while creating PO, the cost center is picked from the u201Cadditional datau201D field of work order not from u2018locationu2019 field of WO.
    Is there any exit available that needs to be implemented for overriding the cost center in PO or any other way of solving this problem?
    Thanks in advance.
    Thanks
    Deba

    Hi,
    I guess that there is already some user exit or enhancement in place, since this doesn't sound like standard SAP (picking the cost data from additional data, or even having it there).
    Mario

  • MIGO - Goods issue to determine cost center based on storage location

    Hi Experts,
    Any idea how to determine the cost center based on the storage location instead of from tcode - OKB9 when creating Good Issue via MIGO_GI?
    Points will be awarded for useful solutions. Thanks.

    Hey Janet,
    A Cost center cannot be determined from an SLOC..it si always at the company code and valuation aea level

  • Goods Issue for Cost Center 201 : special stock E not supported

    Dear guru ,
    I need to run a goods issue(trx.MIGO) for cost center using movement type 201 for a material
    in special stock E (with sales order and sales order item).
    The system send this message : special stock E not supported.
    How can it solved this problem ?
    Thanks in advance.

    first tranfer stock from Sales Stock to Own stock as follows
    Tcode - MB1B / MIGO
    Mvt type -  411 E           Transfer posting sales order to own
    Then issue this own stock to Cost center as follows
    Tcode - MB1A / MIGO
    Mvt type - 201
    hope it helps]
    Regards,
    Rahul

  • Material Issue to cost center which are not allocated to ML

    Dear Experts,
    We have a senario, Material issue to the cost center and through activity type the cost updated in production order, Client wants when reu  CKMLCP the same should  be updated in ML, and also revaluate actual activity price and updated in cost center.
    Please help to solve the issue.
    Thank you

    Hi Nuki
    I hope this material is not price control = 3/S (standard) and also the cost center is not productive type.
    If you consume material with standard price to production cost center it will start a looping in activity calculation and at month end there will balance in this cost center.
    Well I hope I helped you.
    Regards

Maybe you are looking for