Cost center not appearing while settling to GL Account using AIAB

Hi
There is one AuC 100000019. There are two values: Rs.10000 and Rs.145500
Now i want to settle it to GL account using AIAB.
In AIAB under Category field, i gave GL (i.e. GL account as Category). Then i mentioned GL Account as settlement receiver. Then i double clicked on the settlement rule line and specified cost center (same as assets)
While settling using TCOde AIBU, it gave error, and asked for CO object. I do not know why its not picking cost center even though i specifically gave the cost center.
Please let me know what can be done
Thnx
Deepak

Hi Deepak,
What was the resolution here? I know the implementing Note 744194 does not fix this issue. I am thinking 2 possible scenarios:
1. If the cost center for AuC settlement to GL is going to be the same each time, then a GL account can be specifically setup for the purpose of this settlement and the Cost Center can be defaulted via OKB9.
2. If the Cost Center differs, then as you mentioned: It cannot be defaulted.
I am encountering the same issue, please share anything that you can.
Thank you,
Yhuss

Similar Messages

Cost center not appearing for G/L (Balance account) while posting

I have created symbolic account 1300, accrued leave pay with account assign type as F.
I hvae assigned the relevant G/L to this symbolic account under 'assign balance sheet accounts'
However while posting, the relevant cost center assignment is not captured next to the G/L account.
The cost center is correctly maintained in IT0001 and is displayed for the other expense accounts. But is missing for all balance G/L accounts.
Please guide
Ally

Hi Ally,
I have similar requirement, can you please let me know what did you changed in the Posting Variant.
Your help is much appreciated, and rewrded. Waiting for your reply.
Thanks,
Janga K.

Default cost center not appearing for certain users

Hi Gurus,
We are on SRM 4.0 classic scenario.
For certain users when they create SC in SRM the default cost center is not automatically taken into account even if they change it to it. The default cost center was changed for these users and some of them still refer to the old cost center no. which was maintained for them.
The users are not defective and the except the cost center all other attributes work fine. I have tested by deleting & recreating new BP no. for the users but it still doesnt help. Please advise.
BR,
Sambit

hi
check if the users are correctly mapped into org structure (ppoma_bbp)
than check if theri Position are correctly mapped with the default cost center (ppoma_bbp; tab attributes; cost center
regards
andrea

Cost Center not appearing in Hierarchy

Hello,
I am sending an IDoc from an external system into ERP to create new cost centers. The IDoc comes in successfully and creates the cost center and I can see that it was correctly assigned to the cost center area if I look at the record in KS03. However, when I look at the cost center hierarchy it does not show that the cost center has been assigned to the correct node.
Any clue why this may be happening?

Hi,
When sending cost center data with COSMAS01 this will include the hierarchy node in the cost center master data (separate field in cost center table CSKS). So only the information of the cost center node is transported. However, COSMAS does not include the hierarchy itself.
This is a separate IDoc type, namely COGRP1 which is not transported with IDoc type COSMAS01.
Nevertheless, the hierarchy can then be rebuilt in the target system by running RKCORRH1. This report will read the cost center´s master data and insert this cost center into the specified node of the standard hierarchy.
This is actually a regular procedure - if you do not want to run the report you may also need to send the hierarchy with IDoc type COGRP1 separately.
regards
Waman

Cost Center not appearing in FAGLL03

Dear Forum,
We have come accross a peculiar situation. The GL Document is posted using the Non-Statistical Order as well as Cost Center. However, when we veiw the Expense GL Account using the T Code FAGLL03, we cannot see the Cost Center, but can view the Profit Center. But when we view the Exepnse GL Account using the T Code FBL3N we can see the Cost Center. What could be the reason for this? Is it becuase of the use of internal Order in the document? This abnormal behaviour is being observed only in case of document with Internal Order and not in case of other documents posted with Cost Centers but without Internal Orders. What do we need to check to understand this behaviour?
Would appreciate your help in this regard.
Regards

Check the below thread:-
[Re: Cost center missing in FAGLFLEXT;
Regards,
Gaurav

Cost center not committed on shopping cart, for account assign cat "Asset"

Hello,
We are implementing extended classic scenario in SRM 5.0 with ECC 6.0 backend.
While creating a shopping cart in SRM, in the cost assignment tab when we select an account assignment category as Asset", and then try to enter a value in the cost center in the basic details of cost assignment, it is not getting committed to shopping cart screen. The cost center field value is lost when we move to the next screen for ordering the shopping cart. For the asset related purchases, we are using main account assignment category as "asset" and it also requires cost center, because while the asset master record is being created in R/3 for these items,it requires the cost center. We also using internal order. So for the account assignment category "Asset", the other account assignment fields that can be entered are cost center, internal order and one custom field called "project code".
We have created this user-defined field in the cost assignment tab in the shopping cart, purchase order and confirmation documents in SRM in accordance with the OSS note 672960. We have implemented BBP_CUF_BADI_2 & BBP_DOC_CHANGE_BADI, BBP_DOC_CHECK_BADI for the shopping cart object.
Can someone please help me with this issue?
Thanks,
Krupa

thanks Ramakrishna and Yann for your prompt reply..
Ramakrisha,
I know that for assets, SC requires asset number and G/L is automatically derived from the corresponding asset class from the backend. In our case, we are putting dummy asset number in shopping cart and this asset number exists in R/3. But we are not generating asset creation during shopping cart creation but we are doing it during the PO creation in doc change badi. During this asset generation you also need cost center on the asset record. So we have added cost center field for Asset account assignment category and I can see it in the details of account assignment. But when I enter this cost center on shopping cart, it doesnot get committed, it disappears when I order the shopping cart.
Does anybody have any clue why this might be happening?
Thanks,
Krupa

Profit center field is not appearing while posting of customer invoice and

Hi,
profit center field is not appearing while posting of customer invoice in F-02 i was selected profit center field is optional on posting key and field status group level ................
Can anybody tell what are all new gl Reporting list of transaction codes

Hi,
In the F-02 T.Code we cannot find the profit centre for customer line item. We have to attach the profit centre for the other line item i.e income gl account. Due to document splitting system will derive the profit centre and we can see the profit centre for the both line items under General Ledger view.
Thanks,
padmaja

Why does my yahoo mail sign in seal not appear while trying to sign-in

Why does my yahoo mail sign in seal not appear while trying to sign-in when I use firefox only but with MS Internet explorer the sign-in seal appears with yahoo.com

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache
Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
and
* Remove Cookies
'''''Warning ! ! '' This will log you out of all sites you're logged in to.'''
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy.'''
Under '''History''', select Firefox will '''Use Custom Settings'''.
There is a button on the right side called '''Show Cookies'''.
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

After reinstallation of Outlook 2010 on my Laptop, Contacts and Calendar did not appeared while they are exist in my iphone 5 by using icloud. What I should do to get Contacts and Calendars in sync with iphone 5? Thank you.

After reinstallation of Outlook 2010 on my Laptop, Contacts and Calendar did not appeared while they are exist in my iphone 5 by using icloud. What I should do to get Contacts and Calendars in sync with iphone 5?
Thank you.

So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

In make to order cycle semifinished costs are not appearing in itemisation

Hi
We are facing a problem in Make to order. When a production order is created with respect to a sales order, semifinished costs are not appearing in Itemisation or cost component structure of Production order.
In other cases like make to stock and planning with final assembly costs are appearing. we are checking costs at CO02 - goto menu- costs - itemization.
Please provide us solution for this problem.
Thanks and regards,
Deepa

Hi
Please check 'Cost component Structure' Attribute details data for the semifinished component.
In that chek for 'Rollup cost' and also check for 'Filter Criteria for cost component views on Itemization' properly.
Regards
Laxmiprasad
Apart from above pls check for semifinished product in material master in costing1 view for material origin check box, check it if not selected.
Regards
Laxmiprasad
Edited by: Laxmiprasad Pagidala on Jan 22, 2008 2:03 PM

Windows task bar not appearing while in itunes full screen

My Window 7 task bar does not appear while in itunes full screen after updating to itunes 10.5. I checked that it functions correctly with all of my other programs and it used to work fine in previous versions of itunes. It is frustrating when I am trying to check battery power, access my wi-fi hard drive, etc. I have been pressing the windows button to pull up the start menu then I can see whaat I need but this seems to be only a work around. Is there some sort of a check box or something I may have missed in itunes? Does anyone else have this issue?

If it worked OK in the test library give this a try:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT

Balancing field "Profit Center" not filled while doing F110

While posting document there is no error where as while clearing the document through F110 the error is shown as
"Balancing field Profit Center not filled " while doing F110.

Hi,
There could be various reasons why this error would come.
1. Check the settings for the new GL.
2. In particular,Check the configuration for classify GL accounts for document splitting and classify document type for document splitting.Also check config for zero balance clearing account.
3. Analyse the error on which line item the PC is not being filled.
Thanks
Aravind

HT4623 person contact image does not appear while on a call,why?

person contact image does not appear while on a call,why?

when you say "Re-upload the image", do you mean reinsert it, or re-link it?
Neither.
Re-upload it to the web server from your local hard drive. In DW, click on the image file in the Files panel then click the Up arrow to Put the image to the server.
If that does not work, do as Nancy suggests and re-create the image in your image editor then re-upload.

I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?

I am using Window 7 I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?
It does appear on a friend's computer using Firefox.
Barossa Vintage Festival ... this is the missing link on my computer just under the link named ... Autumn photo collection

No problems here with the tree links:
View photos
Friends gather for breakfast
Friends take an Autumn drive
Photos of the Barossa Festival
Reload the web page and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

Error FF753 Tax code 01 not appear in any G/L account item with FM Active

Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
Sandeep

Hi:
          If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
    1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
    2. The tax code is transferred into all conditions, for which
    the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
    the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
    the condition is not statistical (if it is no invoice list condition),
    the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
    1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
    the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
    the condition is not statistical (if it is no invoice list condition).
    the condition is not a tax condition.
    2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
    1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
    2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
    3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
    4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards

Cost center not appearing while settling to GL Account using AIAB

Similar Messages

Maybe you are looking for