Cost center not visible in PR05

Dear All,
I have a situation. This employee was transferred from one company code to another with new cost center. When he was in the previous company code, he has created an expense report and saved but NOT submitted. Now the cost center is not visible in the PR05 screen, however in simulation it is showing the correct cost center (previous cost center). Kindly let me know why this cost center is blank, as per the SAP standards, it should show the cost center which is active during that period of time when he creates the trip.
Regards,
LNB

Hi,
In PR05 the cost center at line item will not show if the default cost center from the employee master data is taken. You can check at the table level which cost center is taken for the trip level. The table is PTRV_SCOS. It is not very clear what is the issue you are facing. Pls provide more details like screen shot OR some more description.
Regards,
Vijay

Similar Messages

Cost center not committed on shopping cart, for account assign cat "Asset"

Hello,
We are implementing extended classic scenario in SRM 5.0 with ECC 6.0 backend.
While creating a shopping cart in SRM, in the cost assignment tab when we select an account assignment category as Asset", and then try to enter a value in the cost center in the basic details of cost assignment, it is not getting committed to shopping cart screen. The cost center field value is lost when we move to the next screen for ordering the shopping cart. For the asset related purchases, we are using main account assignment category as "asset" and it also requires cost center, because while the asset master record is being created in R/3 for these items,it requires the cost center. We also using internal order. So for the account assignment category "Asset", the other account assignment fields that can be entered are cost center, internal order and one custom field called "project code".
We have created this user-defined field in the cost assignment tab in the shopping cart, purchase order and confirmation documents in SRM in accordance with the OSS note 672960. We have implemented BBP_CUF_BADI_2 & BBP_DOC_CHANGE_BADI, BBP_DOC_CHECK_BADI for the shopping cart object.
Can someone please help me with this issue?
Thanks,
Krupa

thanks Ramakrishna and Yann for your prompt reply..
Ramakrisha,
I know that for assets, SC requires asset number and G/L is automatically derived from the corresponding asset class from the backend. In our case, we are putting dummy asset number in shopping cart and this asset number exists in R/3. But we are not generating asset creation during shopping cart creation but we are doing it during the PO creation in doc change badi. During this asset generation you also need cost center on the asset record. So we have added cost center field for Asset account assignment category and I can see it in the details of account assignment. But when I enter this cost center on shopping cart, it doesnot get committed, it disappears when I order the shopping cart.
Does anybody have any clue why this might be happening?
Thanks,
Krupa

Cost center not picked up in the APC posting for Asset

Hi,
The account assignment object KOSTL is active in system, with the below settings.
and below is the transaction type specific settings.
in the posting key and the GL accounts Field status groups, the cost center is optional and activity type is also optional.
In Asset master the cost center is maintained.
But while doing the Asset Acquisition postin the cost center is not updated in the document.
It was expected that the cost center will be derived from asset master and would have reflected in the 1st line item.
Please help me understand, if some other configuration has to be looked at for this perticular issue,
Regards
Rudra

Hi Ganesh / Rudra
CC in Asset Postings has a purpose
Since no Profit Center is directly maintainable in Asset Master atleast until EhP4 or 5, the PC in Asset APC line item was derived through the Cost Center or Internal Order maintained in Asset master
For that reason, your asset APC account must be created as Cost element, even though it is a Balance sheet account.. The cost element category will be automatically 90 - Statistical Cost element
Check if the APC account is made as Cost element or not.. That would be the reason most probably
Hope it is clear
Br. Ajay M
PS :- I heard that from EHP5 or 6 PC can be directly maintained in Asset Master.. I have not seen it yet, so i cant comment on it

Cost center not appearing for G/L (Balance account) while posting

I have created symbolic account 1300, accrued leave pay with account assign type as F.
I hvae assigned the relevant G/L to this symbolic account under 'assign balance sheet accounts'
However while posting, the relevant cost center assignment is not captured next to the G/L account.
The cost center is correctly maintained in IT0001 and is displayed for the other expense accounts. But is missing for all balance G/L accounts.
Please guide
Ally

Hi Ally,
I have similar requirement, can you please let me know what did you changed in the Posting Variant.
Your help is much appreciated, and rewrded. Waiting for your reply.
Thanks,
Janga K.

G/L Account & the Cost Center not updating in BAPI_PO_CREATE1

Hi,
We are using BAPI_PO_CREATE1 for Service PO Creation.
The System is creating the Purchase Order, but it is not updating the G/L Account & the Cost Center.
We are passing the following parameters:
                wa_poaccount-PO_ITEM = '00010'.
                wa_poaccount-SERIAL_NO   = '01'.
                wA_poaccount-quantity   = '100.000'.
                wa_poaccount-GL_ACCOUNT = '0058120000'.
                wa_poaccount-COSTCENTER = '1000-LSG'.
                wa_poaccount-itm_number = '000010'.
                wa_poaccount-CO_AREA     = '1000'.
                append wa_poaccount to it_poaccount.
                clear wa_poaccount.
                wa_poaccountx-PO_ITEM = '00010'.
                wa_poaccountx-SERIAL_NO   = '01'.
                wA_poaccountx-quantity   = 'X'.
                wa_poaccountx-GL_ACCOUNT = 'X'.
                wa_poaccountx-COSTCENTER = 'X'.
                wa_poaccountx-CO_AREA     = 'X'.
                wa_poaccountx-itm_number = 'X'.
                append wa_poaccountx to it_poaccountx.
                clear wa_poaccountx.
Please guide how to correct the error.
Regards,
PK

Hi,
Thanks for the reply.
We are passing the following parameter in POITEM.
                  clear wa_poitem.
                  wa_POITEM-PO_ITEM = '00010'.
                  wa_POITEM-PLANT = '1003'.
                  wa_POITEM-TAX_CODE = 'S1'.
                  wa_poitem-MATL_GROUP = 'SER04'.
                  wa_POITEM-ACCTASSCAT = 'K'.
                  wa_poitem-ITEM_CAT   = 'D'.
                  wa_poitem-pckg_no    = '0000000001'.
                  wa_POITEM-SHORT_TEXT = 'Freight Service'.
                  append wa_POITEM to it_POITEM.
                  clear wa_poitemX.
                  wa_POITEMX-PO_ITEM = '00010'.
                  wa_POITEMX-PLANT = 'X'.
                  wa_POITEMX-TAX_CODE = 'X'.
                  wa_poitemx-MATL_GROUP = 'X'.
                  wa_poitemx-short_Text = 'X'.
                  wa_POITEMX-ACCTASSCAT = 'X'.
                  wa_poitemx-ITEM_CAT   = 'X'.
                  wa_poitemX-pckg_no    = 'X'.
                  append wa_POITEMX to it_POITEMX.
Please guide.
Regards,
PK

Default cost center not appearing for certain users

Hi Gurus,
We are on SRM 4.0 classic scenario.
For certain users when they create SC in SRM the default cost center is not automatically taken into account even if they change it to it. The default cost center was changed for these users and some of them still refer to the old cost center no. which was maintained for them.
The users are not defective and the except the cost center all other attributes work fine. I have tested by deleting & recreating new BP no. for the users but it still doesnt help. Please advise.
BR,
Sambit

hi
check if the users are correctly mapped into org structure (ppoma_bbp)
than check if theri Position are correctly mapped with the default cost center (ppoma_bbp; tab attributes; cost center
regards
andrea

Cost center not appearing while settling to GL Account using AIAB

Hi
There is one AuC 100000019. There are two values: Rs.10000 and Rs.145500
Now i want to settle it to GL account using AIAB.
In AIAB under Category field, i gave GL (i.e. GL account as Category). Then i mentioned GL Account as settlement receiver. Then i double clicked on the settlement rule line and specified cost center (same as assets)
While settling using TCOde AIBU, it gave error, and asked for CO object. I do not know why its not picking cost center even though i specifically gave the cost center.
Please let me know what can be done
Thnx
Deepak

Hi Deepak,
What was the resolution here? I know the implementing Note 744194 does not fix this issue. I am thinking 2 possible scenarios:
1. If the cost center for AuC settlement to GL is going to be the same each time, then a GL account can be specifically setup for the purpose of this settlement and the Cost Center can be defaulted via OKB9.
2. If the Cost Center differs, then as you mentioned: It cannot be defaulted.
I am encountering the same issue, please share anything that you can.
Thank you,
Yhuss

Cost Center not updated in accounting documents generated in SAP RE-Fx

Hi Experts,
I'm facing an issue wherein I don't see the cost centers getting updated in the accounting documents generated from RE postings.
Pl. note that the appropriate cost center (relevant to the cost center) is maintained in the rental objects.
What is the customizing settings I'm missing out due to which I don't see the cost center updated in the accounting documenmts?
Thanks & Regards
Shantanu

HI Shantanu,
As far as I know, in RE-FX we can post the cost to the RE object directly. All the objects in RE-FX (i.e. BE, BU, PR, RO, RECN, SU, etc) are cost objects in themselves. However, to post the cost to Cost centers you will need to run the CO settlement. Again CO settlement rule is available in all these objects.
Please refer the SAP Library for further explanation:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/00/80383b1b793821e10000000a114084/frameset.htm
Regards
Rohit

Cost Center not updating in FI documents

Hi All,
I have an issue,
I am confirming Gem,Maintenance PM order,and consuming spare part, but in FI documents its updates the cost center,PM pm order cost receiver object is cost center in the settlement rule.
please guide me which settings required for update the cost center in FI documents.
Regards,
Santhosh

Hi,
The cost center on the Goods issue document is not related to the settlement cost center on the order.Why would you need the settlement cost center on the Goods issue FI document?
Regards
Narasimhan

Cost center not populated in Purchase requisition for a third party order

Hello,
We are currently testing the Third party order flow which includes :
1. Creation of a sales order with item category TAS
2. A purchasing contract is maintained for a sales order item at the schedule line level.
(In the purchasing contract, account assignment is already maintained for each contract item, meaning a G/L Account and a cost center).
3. Automatic creation of the Purchase requisition when the sales order is saved.
>> The account assignment is not copied from the contract to the Purchase requisition. Do you know why and how I can do that ?
Thanks
Best regards
Benjamin

Hi Palani,
if i am not wrong This WBS in location or additional tabs are used for settlement purpose. For PR creation by maintenance Orders can have Order number as account assignment.
Please reply
Thanks
Sunil

KI222 - Inappropriate Cost Center Not Valid Error Message

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

Hello,
Go to OKKS and set your controlling are correct.
Then go to KS03
See the from validity. If there from date is in past then there should not be any issue.
Make sure that your entry is using current date not old dates in the data using BAPI
You can switch off the message for the time being.
Go to OBA5 and application area KI and message number 222.
Switch off the message for online and batch entries.
This is only for temporary purpose till you pass on your BAPI. But this is not suggest to do it in production system, as this is deviating from standard functionality.
If the message is not available in OBA5, first go to OBMSG transaction code add the message there to the application area (tick switch off message check box) and then come to OBA5 to switch off the message.
Regards,
Ravi

Error KI222 - Cost Center Not Valid for Date

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

are you sure that the posting and document dates you submit with the BAPI are correct?

Cost Center not flowing in the GL view

Hi Friends,
The users have made the entries in the system and defined the Cost centers in the respective fields, while posting the documents. However, when we run the GL Report thru FAGLL03, we notice that the Cost Centers do not get displayed in the Report. On further checking the documents posted we find that the cost centers are maintained in the 'Entry View' but these do not flow to the GL view. This is resulting in the values not getting picked up in the Report Painter Form which is based on the table FAGLFLEXT. How can we chek and waht needs to be done on the config side to enable the values to be flown in the GL view as well and get maintained in the table FAGLFLEXT.
Thanks for the Help.
Regards

Hi Nikhitha,
As advised by Guarav earlier, the cost center scenario has been maintained and in the GL Cost center field has also been included. But still the cost center is not displayed in the GL view.
Is there anything else to be checked in this case.
Regards,

Cost Center not appearing in Hierarchy

Hello,
I am sending an IDoc from an external system into ERP to create new cost centers. The IDoc comes in successfully and creates the cost center and I can see that it was correctly assigned to the cost center area if I look at the record in KS03. However, when I look at the cost center hierarchy it does not show that the cost center has been assigned to the correct node.
Any clue why this may be happening?

Hi,
When sending cost center data with COSMAS01 this will include the hierarchy node in the cost center master data (separate field in cost center table CSKS). So only the information of the cost center node is transported. However, COSMAS does not include the hierarchy itself.
This is a separate IDoc type, namely COGRP1 which is not transported with IDoc type COSMAS01.
Nevertheless, the hierarchy can then be rebuilt in the target system by running RKCORRH1. This report will read the cost center´s master data and insert this cost center into the specified node of the standard hierarchy.
This is actually a regular procedure - if you do not want to run the report you may also need to send the hierarchy with IDoc type COGRP1 separately.
regards
Waman

Cost Center not appearing in FAGLL03

Dear Forum,
We have come accross a peculiar situation. The GL Document is posted using the Non-Statistical Order as well as Cost Center. However, when we veiw the Expense GL Account using the T Code FAGLL03, we cannot see the Cost Center, but can view the Profit Center. But when we view the Exepnse GL Account using the T Code FBL3N we can see the Cost Center. What could be the reason for this? Is it becuase of the use of internal Order in the document? This abnormal behaviour is being observed only in case of document with Internal Order and not in case of other documents posted with Cost Centers but without Internal Orders. What do we need to check to understand this behaviour?
Would appreciate your help in this regard.
Regards

Check the below thread:-
[Re: Cost center missing in FAGLFLEXT;
Regards,
Gaurav

Cost center not visible in PR05

Similar Messages

Maybe you are looking for