Error KI222 - Cost Center Not Valid for Date

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

are you sure that the posting and document dates you submit with the BAPI are correct?

Similar Messages

I get this error when downloading key not valid for use in specified state what do i do

i get this error when downloading key not valid for use in specified state what do i do

What is your operating system? What are you trying to download?

Serial Activation Error "Serial Number is not Valid for this Product"

I have Photshop CS5 Extended edition but when i try to activate the key it comes with the error "Serial Number is not valid for this product". The product has been activated two times before but the installation doesnt come with the error "Serial Number is already in use" or something similar. Any ideas on how to fix this?

Hi Dynamikzz,
As per the error message you received "Serial Number is not valid for this product", please follow the help document as below:
Error "The serial number is not valid for this product" | Creative Suite
In case you have received the error message "Serial Number is already in use", please follow the thread below as the activation count of Adobe CS5 applications is 2 :
Re: serial number issue
Regards,
Sheena

Got error "Your acct is not valid for use in the Israeli store. You must switch to the US store before purchasing" while using an Israeli SIM card in Israel. I switched to Israel on my PC at home in mu itunes acct, but now cant connect to iTunes. help?

Got error "Your acct is not valid for use in the Israeli store. You must switch to the US store before purchasing" while using an Israeli SIM card in Israel. I switched to Israel on my PC at home in mu itunes acct, but now cant connect to iTunes. Help?

found it!
http://www.ehow.com/how_8202183_change-app-store-account-location.html
Instructions
1.
1Tap "Settings" from the main menu of your iOS device.
2Tap "Store."
3Tap "View Apple ID."
4Enter your user name and password.
5Tap the space underneath "Change Country or Region."
6Select the region where you will be located.
7Tap "Done."

KI222 - Inappropriate Cost Center Not Valid Error Message

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

Hello,
Go to OKKS and set your controlling are correct.
Then go to KS03
See the from validity. If there from date is in past then there should not be any issue.
Make sure that your entry is using current date not old dates in the data using BAPI
You can switch off the message for the time being.
Go to OBA5 and application area KI and message number 222.
Switch off the message for online and batch entries.
This is only for temporary purpose till you pass on your BAPI. But this is not suggest to do it in production system, as this is deviating from standard functionality.
If the message is not available in OBA5, first go to OBMSG transaction code add the message there to the application area (tick switch off message check box) and then come to OBA5 to switch off the message.
Regards,
Ravi

Error saying cost center/EAT007 validity exists only for 2009

I am trying to upload the HR details from Non SAP to SAP for 2010, using an interface from T.code se38, I am getting an error saying
"Master record for cost center(number)/ EAT007 exists only for 2009".
When I see the cost center validity in KS02, its validity is from 01.01.2009 to 12.31.9999.
Could anybody answer this.

Hi Abhishek,
I am trying to upload the time sheets of the employees from other software to SAP using the Tcode SE38,
Later from HR to Co we are using CATs (Cat2 and CAT7) to transfer the data. Time time sheet contais the details of the sales order against which they have spent time, their time consumption for providing services and also the activity type they have performed.
In SE38, while I am trying to upload the data it shows an error saying "Master record for cost center/EAT007 exist only for 2009".I am trying to upload the data for 2010 Jan to Aug.
When checked, the Cost center's validity in our system is from 01.01.2009 to 12.31.9999.
Please assist.

Default cost center not appearing for certain users

Hi Gurus,
We are on SRM 4.0 classic scenario.
For certain users when they create SC in SRM the default cost center is not automatically taken into account even if they change it to it. The default cost center was changed for these users and some of them still refer to the old cost center no. which was maintained for them.
The users are not defective and the except the cost center all other attributes work fine. I have tested by deleting & recreating new BP no. for the users but it still doesnt help. Please advise.
BR,
Sambit

hi
check if the users are correctly mapped into org structure (ppoma_bbp)
than check if theri Position are correctly mapped with the default cost center (ppoma_bbp; tab attributes; cost center
regards
andrea

KP90 error - KI222 - Cost Center does not exist.

Hi gurus,
While executing KP90, I got an error message saying "Cost Center xxxxxxx does not exist on 01/01/2011.
When I checked, the cost center is created from 05/01/2011 to 12/31/2011.
Please suggest any solutions....
1) Can I change the message class for KI222
2) Can I change the from date of cost center.
Please suggest as this in an High priority!!!!!!!!!!!!!
Regards,
Devang

Hi Devang,
As you can see, cost center was created some days after the date that the error message is showing.
You should create for this cost center the missing interval (01.01.2011 to 04.01.2011) and in case you create with the same data the interval will be combined.
Best Regards,
Vanessa.

Cost center not appearing for G/L (Balance account) while posting

I have created symbolic account 1300, accrued leave pay with account assign type as F.
I hvae assigned the relevant G/L to this symbolic account under 'assign balance sheet accounts'
However while posting, the relevant cost center assignment is not captured next to the G/L account.
The cost center is correctly maintained in IT0001 and is displayed for the other expense accounts. But is missing for all balance G/L accounts.
Please guide
Ally

Hi Ally,
I have similar requirement, can you please let me know what did you changed in the Posting Variant.
Your help is much appreciated, and rewrded. Waiting for your reply.
Thanks,
Janga K.

Fatal Error During Solution Center Install - "Key Not Valid for Specified State"

I have encountered an error while trying to install HP Solution Center for my J6480 All-In-One. The software I'm installing is "OJJ6400_Full_10.exe"
I can get past the installation option selections (i.e., the screens that allow selection of which components you want installed) as well the online check for updates to the software. However, shortly after that I get a fatal error the full text of which are:
Error Situation Code: 23551631
The following lines were retrieved from the installation error logs.
Now Launching=X:\hpzmsi01.exe -m dot4wrp "-*"
".\autorun_network.inf" "-networkonly" -| XXX -f X:\DIVins??.DAT
Error message received: Key not valid for use in specified state.
X:\cioum32.msi failed with return code 1603
MSIInstall() failed with 1603
Exit code=1603
Your help is appreciated. Thanks.

Hey @redleader74,
At this time I am going to have you unlock the hidden System Administrator Account and attempt an install under there. Ideally, if everything installs fine you should be able to log back into your normal User Account and the complete software and driver package for your HP Officejet J6480 All-in-One Printer will be installed and functional. Can I please have you follow the steps below.
Step 1: Uninstall Drivers:
Click on your Start menu
Select All Programs
Select the HP folder
Select your HP Officejet
Select Uninstall
Please follow any onscreen prompts to complete the uninstall. Once the uninstall is complete please proceed to the next step.
Step 2: Clear Temp Files:
Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling Bin
Step 3: Unlock System Administrator Account:
Click on your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
Next, close CMD and restart your computer
When your computer comes on log into the new Account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator Account we just unlocked
Step 4: Install Device:
Under the Administrator Account please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Once the download is complete please follow the onscreen instructions to install your printer
Once the installation is complete, please test the functions of your HP Officejet to ensure that everything is functioning properly now. If everything installs fine, log out of the Administrator Account and back into your normal User Account. All the Software and Drivers for your product should show installed now on your Account. Once you're logged into your User Account please test your HP Officejet again to verify that your print and scan functions are still working.
If everything works fine, you will want to Hide the Administrator Account.
Go to your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
Next, close CMD and restart your computer
Please let me know if these steps resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Key not valid for use in specified state error message

I did the update for my iPhone and also tried to update iTunes. I kept getting an error message of "key not valid for use in specified state" error message. I thought that if I uninstalled iTunes and re-installed it, that it would be fine. I'm still getting the message and now I don't have iTunes. When my phone updated, I couldn't download anything/backup my phone to iTunes. Please help. Thank you in advance.

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
For further problems installing iTunes see Troubleshooting issues with iTunes for Windows updates.
tt2

While trying to download update 11.4 for i tunes i received an error message "key not valid for use in specified state" what does that mean ? anyone please help ?

while downloading update version 11.4 an error message appeared "key not valid for use in specified state " help ?

See if this post by turingtest2 fixes it : key not valid for use in specified state

Error in CNS0 :Sales unit is not valid for the item

Dear Team ,
we are using assembly process ,after creation of project from sales order ,requirments are pass to production planning (PP), Asign the bom to activites then we are going to delivery through project (cns0) at the time system shows error" sales unit is not valid for the item" we check the options in material master .please help me on this issue.
Thanks &Regards
R.B.RAO

Have a look at the following note:-
Note 140551 - VL384 Stock transport order and batch selection
G. Lakshmipathi

Cost center Vs production order dates

Hi,
When the cost center will be posted in a production? Actually i have a work center, that has 2 cost centers with different validity dates..? how to find out which cost center is valid for that production order..? based on which date in the production order..? Kindly clarify.
TIA
Sabitha

Hi Sabitha,
It is based on the scheduled date range of operation in production order
Best regards,
Kalyan

Wage Type is not valid for allowance grouping

Gurus
When i am Executing PC00_M40_TERM and entered Details then in very next screen it is with error
''Wage Type is not valid for allowance grouping ''
The Issue is showing generic and No specific Wage type shown in error.
ABAP Team also Debuged and could not get the Issue.
Kindly Let me know from your Experience what could be the Issue.

Your wage type is missing in allowance grouping configuration against RAP indicator R,Reimbursement
Check table V_T7INA9 , check the wage type is configured for the allowance grouping of that employee with RAP Indicator R, Reimbursement

Error KI222 - Cost Center Not Valid for Date

Similar Messages

Maybe you are looking for