Cost Center value

Hi all
Can any one explain me one thing in same connection of cost center
At what time cost is captured at cost center in the below flow, please correct me if I am wrong
At the time of GR
Material A/C Dr
To GR/IR
At the time of IR
GR/IR Ac Dr
To vendor
Issue material to production order
Material Consumed
To Material
Received from Production order
Finish Good Inventory A/c Dr
To cost of finish good cr
At the time of PGI
COGS
Finish Good Inventory
At time of billing
Customer A/C Dr
To Revenue
Now at what level cost center is effected im not able to understand.
Please clear my doubt. because in every place i find orders (in purchase and sales order).
If i see cost center report i will not find any value related to above.
Thanks in advance
Shyam

Thanks for reply,
as you told that Cost Centers are normally used for Overhead cost management, while direct material costs in production environment do not flow via Cost Centers.
So can you please tell me what is difference beteween Cost center and order, as both are use for capturing costs
Regards
Shayam
Edited by: Shayam_210 on Oct 20, 2009 12:36 PM

Similar Messages

Material Attribute value display based on cost center value

Hi,
Is it possible to display the material attribute value based on cost center value. I mean for some cost centers I would like to display the value of other characteristic in place of material attribute. I am trying to create a query on MP.
Any info in this regard will be appreciated.
Thank you.
Harshan

Hi Adi,
In Rows, Create a struture. Using New Selection, You can restrict the New Value to the cost center (Restrict again on those some cost centers) and material. And for this New Characteristic, you can have a attribute.

Cost Center values of POs

hi,
i want to get the cost center values for all POs. in BBP_PD i could see the cost center assignment values under table BBP_PDACC.
i'm not able to link this table with CRMD_ORDERADM_H & CRMD_ORDERADM_I tables.
i found one FM BBP_ACCOUNT_MULTI_GETDETAIL but this accepts only one header guid.
but primaraly i want to fetch directly from the table.
Please let me know how i can link the CRMD_* tables with BBP_PDACC.
thanks,
gupta.

its got resolved.
CRMD_ORDER_ADM_I->CRMD_LINK->BBP_PDACC
thanks,
gupta.

Find the KOSTL(cost center) value using coing group and coding code

Hi,
Can we get the value cost center Kostl by using coding code and coding group. As per the requirement the coding group is specified in the table qmel-qmgrp and the coding code is qmel-qmcod.. So by using this values only can we get the KOSTL value..Please do help me in this regard.

so the thing is for the particular coding group QMGRP we have the coding codes QMCOD assigned to it and for the transaction QM01 we cannot have the notification number (as this number is generated only after the transaction is completed)only the notification type is specified in first screen after we press enter a subscreen with Production order number is specified press enter,
later in the first tab strip specify any material number and also plant number later the defect location and defect type, later in the subject tab strip in the coding group we get the F4 help for the coding code and group,there by picking any of the elements we also get the KOSTL value in text so i was just worried where can we get this value i have checked for the options that u have specified but this doesn't work for me...
Thanx and reply me back(very Urgent)

Doesn't save Cost Center values

Hi experts ,
I have an issue with cost center,When I have a cost center in product envi in the Headcount application.I am trying to post values against cost center for employees.
But its not saved in the DB.I have crosss checked all the locks and tried to replicate this isue in our test sys,but it doesn't replicate.Please advise.
Ravi

Hi,
I would request you to follow few things.
1. Check the member access profile for the problematic User ID. Make sure that the ID has the write access to the members of the secured dimensions.
2. Full optimize the application, so that the FactWB table is empty.
3. Now run the input schedule with the problematic ID and post records. After this, open the factWB table and compare the records.

Report Painter- Cost Center/order value

Dear All.
My user want the report. All the Cost Center value & order value with Cost Element. I developed the same in the system by using the library "1VK". which one is good & working fine.
User also want the value of Expense GL ( Do Not Have Cost Clement, I.e price difference A/C, gain/loss A/C) in onle colmon.
Please help me, how can I add the Expence GL in the report. in the library "1VK". there is no charactertics General Ledger.
Is it Possible

Use FSV based Reporting if your version is >= 4.7EE
Create a FSV.
Use TCODE FGI4 for creating the form.
Use TCODE FGI1 for Creating the Report
Reward if useful.
Sarma

Authorization on cost center !

hi,
i need help on Cost center Authorization.
I have crared 3 dso. 1 for Hierarchy nod, 2. single values and 3. user reporting. and the data is loaded in all 3.
after this i have generated Authorization in bW using RSSB_Generate_Authorization.
Now, i m in Tcode RSSM, over there i am creating Authorization object ZZZ_OPC.
Over here , i have to select Infoobjects for authorization.
i have choosen 0TCTAUTHH for hier, 0costcenter ( As i am doing authorization on this ), what else i have to choose ?
do i have to choose anything for Single value ? if yes then which info object ?
thankz

Hi,
The relevant authorisation objects are as follows:
K_CSKS_SET: This will allow display/change/creation of groups based on activity selected.
K_CCA: This is a general authorisation object (relevant activites should be 0003, 3027, 3029). You are obviously trying to run a report. For running a report the relevant authorisation object is K_REPO_CCA, which sadly does not have cost center group as a selection, only cost center values and ranges.
However, K_CCA will work, if the cost center group that you have entered in the authorisation is also present in the standard hierarchy. Can you test this, enter a cost center group from the standard hierarchy and not just any group that you have created seperately. The authorisation should get restricted to that group.
Cheers.

Restricting cost center selection during creation of reservation

Hi,
We had a requirement to restrict the selection of cost center during creating a reservation. An user should be restricted in selecting any other cost center which does not belongs to his department. Since the restriction was not possible in standared/available authorization objects, we have created a customized object thru SU2. The Z object is available in role maintenance (PFCG) which we assigned to the object class MM_B and maintained the relevant cost center value.
Still it is not giving the desired result as selection of any aother cost center (which is mot mentioned under the Z object) is permitted while creating a reservation.
Request your valuable update in fixing the issue.
Thanks & Regards,
Vinod Punnoran

Hello Vinod,
How to manipulate the screens from transaction MB21 to avoid your
issue?
a) by transaction OXK1:
In customizing transaction 'OXK1' you can see which screens are
available and in which order they are selected by the program.
This transaction also allows to add customer-defined screens, to
change the priorities and to de-activate standard screens.
So if you create yourself a screen with all the fields you
would like to see you can assign it in OXK1. You would have to
set the priority key so that program would choose your screen rather
than the standard screens.
Transaction OXK1:
The coding block searches through the existing subscreens for the one
which fulfills most requirements. The "Priority" serves as fine tuning
in the search procedure: 1 is the highest priority, 9 the lowest.
The system searches for the most suitable subscreen according to the
following strategy:
First, it searches for subscreens containing all the account assignment
fields required. If there is more than one, it selects the one with the
highest priority.
If this is unsuccessful, the system then looks for subscreens containing
all of the obligatory fields, or as many of them as possible. The
subscreen containing the most obligatory fields is selected.
If two subscreens contain the same number of obligatory fields, then the
one containing the most required account assignment fields is selected.
If there is still more than one, the selection is made according to the
priority.
b) by user exit or BADI
Enhancement to manipulate reservation data is MBCF0007 and the user
exit is EXIT_SAPMM07R_001.
MBCF0007 Customer function exit: Updating a reservation
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
There is a BADI as well:
MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
I hope this information helps you.
Best Regards !
Fábio Almeida
MM Consultant

MB1A Missing cost center in Accounting Document.

Hi All,
WHile I run MB1A transaction & input the movement type & select the order number & save i get a Material Document generated (MSEG ) & an Accounting Document as well ( BSEG ).
My requirement is to fill up the corresponding cost center value in the Accounting document which is blank as of now for all.
Can this be achieved by some Functional setting?
I searched for all USER EXITS & BADI's but non of them seem to have a place where i can modify the BSEG-KOSTL Value.
Need your Valuable inputs on this.
Thanks.
Kevin.

Hi Kevin,
In MB1A the following exits are available,
MBCF0002
MBCF0005
MBCF0006
MBCF0007
MBCF0009
MBCF0010
MBCF0011
MB_CF001
However check by putting a breakpoint on exit EXIT_SAPLFMR4_002 which is accouting document if you can do anything here.
Thanks and regards
Kedar

From which table do i fetch cost center????

Hi..
i have material and plant as selection screen parameters..
CSKS table has plant and cost center.. but when i checked the contents of the table...there is no value for plant..
so plz suggest me smeother table wherein i can fetch cost center details.

Hi,
You can check field (AUFK-KOSTL).
To get the cost center group hierarchy you can use
BAPI_COSTCENTERGROUP_GETDETAIL
Details for this are stored in SETNODE table.
And to fetch the cost center from a given cost center group.You can use code given below:
Cost Center group can be viewed from field SETCLASS of table SETLEAF.
To Fetch the relevant cost center from a cost center group, we can use FM: 'K_HIERARCHY_TABLE_READ'.
Sample code for this purpose:
Call Function module to fetch values corresponding to a
CostCenter group
CALL FUNCTION 'K_HIERARCHY_TABLES_READ'
EXPORTING
e_class = p_c_kostl_class
e_setid = p_v_setid
e_kokrs = p_kokrs
TABLES
t_nodes = p_it_ccnodes
t_values = p_it_ccvalues
CHANGING
c_info = v_info
c_overwrite = v_overwrite
EXCEPTIONS
no_controlling_area = 1
no_chart_of_account = 2
different_controlling_areas = 3
different_chart_of_accounts = 4
set_not_found = 5
illegal_field_replacement = 6
illegal_table_replacement = 7
fm_raise = 8
convert_error = 9
no_overwrite_standard_hier = 10
no_bukrs_for_kokrs = 11
OTHERS = 12.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
In this FM:
Export Parameters: p_c_kostl_class = (SETLEAF-SETCLASS) i.e '0101' for cost center group.
p_v_setid= The first four characters is the setclass ('0101'), the next four characters is the controlling area,the remaining characters is the cost center group.
p_kokrs = Controlling area.
Tables: p_it_ccnodes = TYPE STANDARD TABLE OF ty_seth_node_line.
p_it_ccvalues = TYPE STANDARD TABLE OF ty_seth_val_line.
You get the cost center values in the table p_it_ccvalues.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 25, 2008 5:29 PM

Individual COst center restriction in BI

My company is also looking for restricting access to cost center specific & we have implemented a solution using Listcube tcode, let me explain the steps.
1. The Analysis auth obj (AA) contains ZCC_AUTH info object which is given aggregated values.
2. this AA is inserted into the role & then assigned to the user.
3. The User assigned to a specific Cost center is inserted into the ODS table.
4. Then the Listcube tcode is run for the infoprovider, which assigns the costcenter to the user Id.
5. When User runs the BI query the assigned cost center values only is retrieved from the database.
But i feel this is has disadvantages
1. Every time a new user is created, the ODS table as to be updated with this info & list cube as to be generated or if a user changes the Cost center then we once again have to update the ODS table & regenerate using the List cube.
Now i would like to know the solution w.r.t user customer Exit with variables
1. when is the customer exit is trigerred -
a. when the query executed by the user is run or when the auth check is done for cost center in the AA object?
2. How to determine inside a query which info object are being checked, i know in RSECADMIN the trace shows which auth objects have been checked - but seeing a query i need to know which auth obejcts have been used for retreiving data.
your suggestions are really helpfull for me to debug this issue we are facing.
Thanks a lot in advance.
regards
Naveen Murthy

1. when is the customer exit is trigerred -
a. when the query executed by the user is run or when the auth check is done for cost center in the AA object?
Ok here's the thing. You are looking at two things that are in sequence. You opted for the System to check for InfoObject (here CC). In order to get that info the system triggers the Customer Exit. So to your question, the Cus Exit is triggered when the query is excuted. And based on the info in the Customer Exit the system check for the Cost Center Access.
2. How to determine inside a query which info object are being checked, i know in RSECADMIN the trace shows which auth objects have been checked - but seeing a query i need to know which auth obejcts have been used for retreiving data.
I doubt if that info is available in the query, since queries are build based on InfoObjects and not auth objects.
AB

User exit to input Cost center in Billing document

Hi all,
My requirement is I need to get the cost center value in accounting document ( FB03)
Actually a contract is getting created and a billing document is generated and saved.
There is no cost center in contract creation screen (VA41)but it is visible in billing document(vf01) in grey mode.
Now my requiremnt is based on contract type ,distribution channel, sales org. and division I need to pick the cost center and should get display the value in accounting document(fb03).
For this do I need to go for user exit ? If yes then where should I write it ?
In Contract creation screen(VA41) or in the billing document screen? and plz guide me the program name and User exit,
or is there any other solution for this?
Plz answer

I think you have to try from the Txn VF01 and the below are the BAdi and method details
Check the BAdi SD_CIN_LV60AU02 in the method EXCISE_INVOICE_CREATE check the importing parameter of the method
XVBRP Importing Type VBRP_TAB

How to Override Cost Center in IT 1 based on certain conditions

Hi,
I have a pretty good understanding on how Cost Center gets defaulted based on Org Structure. The standard SAP solution for Cost Center will not work for my client and I need to determine the cost center based on certain conditions. I understand that I have to write custom code in some user exit or badi. I tried user exit EXIT_SAPFP50M_001, but it did not work.
Here is my code:
DATA: I0001 LIKE P0001.
CASE INNNN-INFTY.
    WHEN '0001'.
      CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
        EXPORTING
          PRELP = INNNN
        IMPORTING
          PNNNN = I0001.
This is just an example to test the concept
I0001-kostl = 'COST_CENTER'.
     CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
        EXPORTING
          pnnnn = i0001
        IMPORTING
          prelp = innnn.
endcase.
When I change IT 1 record and hit enter, I can see that my code is being executed. I can see cost center being updated on the screen, but when I save it, its not able to retain that new cost center value. This might be because cost center is not an open field.
How can I change my code so it retains its value after saving?.
Thanks!

Contd to manoj
Cost Center will be a Open feild when the value of   the switch PLOGI ORGA should be balnk if it is haveing 1 than it will not default the value kindly check

Cost center in FB01 - User exit or BADI

Hi,
I would like to change the cost center field data in transaction FB01 with some other data based upon some conditions.
Please suggest with user exits or badi.
thanks.

Thanks for reply.
In the user exits mentioned, checking for cost center value in the import parameter DOC_ITEM_TAB and based on some validations i have changed the it to other value. But this new value is not considered by the program still it is creating with the old value.
The changed value has to be exported from the user exit right? this is not happening as we know dont have cost center field in export or changing parameters
Please suggest

Special Ledger Cost Center

Hi,
What is the sender and receiver cost center. If we check special ledger table then there are 2 fields in it cost center and receiver cost center. For the settlement entries cost center value appears in the field receiver cost center.
Thank you,
Sam

PKOSTL = is the receiver cost center while KOSTL = CNTR is your sender cost center. Also you will observe in the object table 1 the sender cost center "KOSTL' is marked "tick" for sending.
Nakul Chakoo

Cost Center value

Similar Messages

Maybe you are looking for