Cost Variance account change in org parameters and cost group

Hi,
Bussiness came to know that cost variance account setup as of now in org parameters and cost group are wrong and need a correction.
But already transactions happened in this org.
As per metalink NOte: 1144105.1 , saying to create a new org is the only solution.But any one know a best solution which can be used instead of a new org creation.
Thanks
vasudha.

I guess no other option...as far as i know
HTH
Mahendra

Similar Messages

  • Change in Oracle Parameters and Log file size

    Hello All,
    We have scheduled DB Check job and the log file showed few errors and warnings in the oracle parameter that needs to be corrected. We have also gone through the SAP Note #830576 – Oracle Parameter Configuration to change these parameters accordingly. However we need few clarifications on the same.
    1.Can we change these parameters directly in init<SID>.ora file or only in SP file. If yes can we edit the same and change it or do we need to change it using BR tools.
    2.We have tried to change few parameters using DB26 tcode. But it prompts for maintaining the connection variables in DBCO tcode. We try to make change only in default database but it prompts for connection variables.
    Also we get check point error. As per note 309526 can we create the new log file with 100MB size and drop the existing one. Or are there any other considerations that we need to follow for the size of log file and creating new log file. Kindly advise on this. Our Environment is as follows.
    OS: Windows 2003 Server
    DB: Oracle 10g
    regards,
    Madhu

    Hi,
    Madhu, We can change oracle parameters at both the levels that is init<SID> as well as SPFILE level.
    1. If you do the changes at init<SID> level then you have to generate the SPFILE  again and then database has to be restarted for the parameters to take effect.
        If you make the changes in SPFILE then the parameters will take effect depending on the parameter type whether it is dynamic or static. You also need to generate the PFILE i.e init<SID>.ora
    2. If possible do not change the oracle parameters using the tcode. I would say it would be better if you do it via the database and it would be much easier.
    3. Well its always good to have a larger redo log size. But only one thing to keep in mind is that once you change the size of the redolog the size of the archive log also changes although the number of files will decrease.
    Apart from that there wont be any issues.
    Regards,
    Suhas

  • Creation and Change Date for Tcode and Function Groups

    Hello All,
    I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
    regards,
    Mahesh

    Hi,
    TADIR and TRDIR is the tables where you can find all these data
    Regards
    Sudheer

  • Cisco WLC : AP automatic configuration for flexconnect parameters and ap group

    Hello !
    Is there a way to configure cisco WLC to automatically set flexconnect parameters such as Vlan support and Native Vlan ID when an access point join the controller ? 
    Same question to assign the access point to a specific AP Group ?
    PS: The access points are set with usine parameters and the WLC is in version 7.4
    Thank you for your answers !
    Stephane

    To my knowledge these features are not available in 7.4, but from what I understand 8.0 will have similar features. I can say that 7.6 has global commands, not sure if its part of 7.4.
    If it is you can navigate there Wireless>Access Points>Global Configuration you can do things like configure your primary and backup controllers, set login credentials, pre-download images to AP's.
    Please rate if you find the information helpful.
    HTH

  • ORG Unit and User groups

    Hi,
    I need the function modules that can :
    1) Fn. mod. to give all user groups to which a user belongs
    2) Fn. mod. to give all Org. Units to which a user belongs
    Full marks.....
    Regards,
    Gaurav.

    hi,
    call function 'HRCM_ORGUNIT_EMPLOYEE_LIST_GET'
    exporting
    plvar = p_plvar
    otype = 'O '
    objid = s_orgeh-low
    begda = p_effdt
    endda = p_effdt
    * PATH_ID = 'O-S-P'
    tables
    pernr_table = i_pernr
    exceptions
    path_error = 1
    root_error = 2
    no_employees_found = 3
    others = 4
    Regards
    Reshma

  • Sales office and sales groups description mass change

    Can i know how to go abt changing the sales office and sales groups descriptions in bulk.
    I have arnd 500 entries to change if done manually ! Is there any other way out?

    Hi Vamshi,
    T Code MASS wont work as this is to change the descriptions of sales offices and sales groups.
    If i have to do manually i will have to get into SPRO and change accordingly.
    So, how do we go abt?

  • How to restrict Sales office and Sales Group.

    Hi All,
    I want to restrict the users from changing the sales office and sales group in the sales order.
    Is there any standard way to achieve this or do we need to do with User exit??
    Please help.
    Thanks,
    Pavan.

    hi
    there is no standard settings for estrict the users from changing the sales office and sales group in the sales order
    so you have to write the logic in userexit
    DATA: lt_user_list   TYPE STANDARD TABLE OF tvarvc,
           lw_user_list   TYPE tvarvc,
           lr_user        TYPE RANGE OF syuname,
           lw_user        LIKE LINE OF lr_user.
    IF screen-name EQ ' VBAK-VKBUR' and   VBAK-VKGRP.
    * IF sy-tcode EQ 'VA02'.
    **Get list of users who are allowed to change SO - only they can change payment terms
         SELECT *
           FROM tvarvc
           INTO TABLE lt_user_list
          WHERE name = 'ZSD_VA02_ALLOWED'
            AND type = 'S'.
         IF sy-subrc = 0.
           LOOP AT lt_user_list INTO lw_user_list.
             lw_user-sign = lw_user_list-sign.
             lw_user-option = lw_user_list-opti.
             lw_user-low    = lw_user_list-low.
             lw_user-high   = lw_user_list-high.
             APPEND lw_user TO lr_user.
             CLEAR lw_user.
           ENDLOOP.
    **    If user is not in the users listed for change allowed
           IF sy-uname NOT IN lr_user.
             screen-input = 0.
           ELSE.
             screen-input = 1.
           ENDIF.
         ENDIF.
       ENDIF.
    ENDIF.
    go to STVARV t code here you check the NAME and give the user ids who need to change

  • Problems with overage charges and making account changes on line

    I have quite a bit of history involving my attempts to resolve the problem of catching my account before it goes over the minutes allowed and making the changes on line (to cut down on call volume) to change my account to raise the minutes allowed for that billing cycle.  I was given one reason why it didn't work the first time (I didn't print out my confimation proving I made the changes - bit the bullet and paid those charges) and so the second time wanting to avoid the problem from the first time I made sure I printed out my confirmation.  The confirmation had an effective date of change of 07/19/2012 the day I was informed I was nearing my allowed minutes.  There were only 4 or 5 maximum days left in that billing cycle so I wanted to nip the problem in the bud and make the changes to my account to be made "that" day.  My confirmation said the changes were effective 07/19/2012.  In plently of time before that billing cycle ended.  Again I was told I did something wrong.  This time I'm holding my confirmation in my hand even as the person is telling me again I did it wrong.  The purpose Verizon wants it's customers to use the available on-line option is to cut down on their call volume.  I didn't go to school to get the knowledge apparantly needed to perform these particular tasks in a manner that is acceptable to Verizon.  Has anyone else had problems with trying to fix their problems themselves using Verizons "helpfull" on-line choice?

    I have an explanation for you by what was meant by "you did it wrong."
    When you make a change effective the date you are requesting it and not at the start or end of your billing cycle, your minute usage for that month is pro-rated.
    For example, you say you made a change, because you were nearing your allowance limit, on 7/19/2012 and wanted it effective that day with 5 days left in the billing cycle. Lets assume that your allowance is 700 minutes/month and you were at 675 minutes for that month(still under your monthly allowance). If you make a change effective with 5 days left in your billing cycle to the 1400 minute/month allowance, your allowance for the 1st 25 days of your cycle will have been pro-rated to (25/30) * 700 = 583 minutes. This would mean you would have already had an overage of 92 minutes for the 1st 25 days of the month. Additionally, you would have a pro-rated allowance to use the last 5 days of (5/30) * 1400 = 233 minutes. This is how the pro-rating works when you make a change effective during the middle of your billing cycle.
    What you need to do next time to avoid these overage charges is to make the change effective at the beginning of your current billing cycle. So if you had made the change on 7/19/2012, but your billing cycle ended on 7/24/2012(5 days later), you should have made the change effective at the beginning of your current billing cycle, or 6/24/2012. This is called backdating the change. In this instance, you would have received a credit on you account for the cost of the 700 minute plan and been charged the full amount for the 1400 minute plan on your next bill, which I believe is a net additional charge of $10 and you would have had the use of 1400 minutes for throughout the entire month. In this example, you would not have had any overage with your 675 minutes during the 1st 25 days of your cycle and would have been able to use 725 minutes over the last 5 days of your billing cycle. This is much better than the overage charge you would receive with 92 overage minutes @ $0.45/minute = $41.40.
    I hope this explains it.

  • TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address.  This sometimes leads me to send the email from the wrong outgoing email account.  It is frustrating and poor design.

    When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address.  This sometimes leads me to send the email from the wrong outgoing email account.  It is frustrating and poor design, especially since I had already checked the From: address.
    iPad 4 running iOS 8.1.3

    3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
    Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
    LJ
    http://www.facebook.com/The.Cowboy.Party

  • HT5622 I changed my Apple password and I get the information at the wrong email address.  The correct email shows in my Apple account.  Why is the mail going to the wrong email? How do I fix it?

    I changed my Apple password and I get the information back at the wrong email address.  My email address is right under my Apple ID.  How do I get this corrected?

    AWDunams wrote:
    Okay so I associate the e-mail address as the apple ID and that seems to be a wrong assumption.  I did go to my Apple ID and changes the e-mail address and the password but for the same and only Apple account I have ...
    That is good.  In that case, your one and only account has not changed, just the login credentials you use for it.  All your previous purchases will remain associated with that account, and the new login.
    In essence, an AppleID is an email, but it has two parts.  One is the login email address and password everyone traditionally thinks of as an AppleID.  But that in turn is linked to an account with Apple.  As long as you use the manage Apple ID portal to just change the email address and/or password for your exisiting AppleID, then the internal account tracks along with those changes as well.
    However, on your iOS devices, you will need to log out and then log back in with the new login credentials:
    settings -> iTunes & App Stores - tap your AppleID, and choose log out.  Then log back in with the new email address and new password.

  • I downloaded 2 cds onto my ipod nano through itunes.  Recently my itunes account changed and now it doesn't recognize the songs from the cds.  How to transfer from ipod back to itunes?  I don't have the cds anymore.

    I downloaded 2 cds onto my ipod nano through itunes.  Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds.  The songs are still on my ipod.  I am affraid to sync now because the songs may be deleated, and I don't have the cds anymore.  How can I transfer the songs from the cds on my ipod back to itunes so that I don't lose them? 

    What you have on your computer is your iTunes library, not your "account."  The "account" you have for iTunes is your Apple ID, which you use when purchasing or downloading from the iTunes Store.  If these songs came from music CDs that you imported into iTunes, those songs are not related to your Apple ID.
    Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds
    How are they not "recognized"?  Are the songs still listed in your iTunes music library, but grayed out?  They no longer appear in your iTunes library at all?
    If you search your computer (not in iTunes) for the song files, using one of the song names, can you find the song files?

  • HT2204 I have changed my apple ID and this has been verified by email and when i go on to my account but it is still registering on my IPad when I try to purchase anything through apps and iTunes I can't.

    I have just had to change my apple ID on the apploid site and that worked. I got an email to verify and did so. Yet when I try to use my iPad to purchase it is still showing my old ID so I can't make a purchase through ITunes or apps. I have gone on my ID account a number of times and the new one does work to sign in. I can't work out how to get my IPad to recognise this change or edit in manually through the IPad

    If the old ID ("email address") is your ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID.  Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to iCloud pops- up constantly. My iCloud account is registered with an old email and password. I do not remember the

    I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to ICloud pops- up constantly. My ICloud account is registered with an old email address and password. I do not remember the password to my ICloud account, and ID address that my ICloud account is registered under is an old email adress which is deleted right now (the old mail account is deleted). I don’t have a rescue email adress and I don’t know the answers to the security questions, so I have no way of changing the ICloud password. A message asking me to sign in to ICloud pops up constantly, but I always just hit cancel. However, now I am unable to access Find My IPad. How do I get my ICloud account changed and registered to be under my current Apple ID (email) and password? It is possible to set the device as New Ipad?

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • I changed my email address and apple id a year ago, but do not know how to change my iCloud account

    Hello! I changed my email address and apple id a year ago, but i am not sure how to change my icloud acccount information so it meshes with all my apple devices which include: an original ipad, iphone 4s, and my macbook pro. I keep seeing this message, " I cloud unable to access the account ( my old email address) Review your account information in your settings. OR it asks me for my old email address password, which i do not remember!
    I would apprecaite any assistance anyone can provide. Thank you!

    Sign out of the iCloud account (In System Preferences>iCloud)
    Then sign back in with the correct ID and password.

  • How do I change my security questions and answers without setting up a new account. I can't remember the answers to the questions that they ask.

    How do I change my security questions and answers without setting up a new account. I can't remember the answers to the questions that they ask.

    1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for support
            and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions
    5. For online assistance use Apple - Support - Express Lane

Maybe you are looking for