Could anyone explain to me the last part of these instructions.

Helo Experts,
I am trying to implement a calendar in forms 6i but can't really understand how to do the deployment.
It is as follows:
You should perform the follwing steps to install and configure the JavaBean for development and deployment in an Oracle Forms Server application:
* Copy the entire oracle directory and its subdirectories from the classes directory to the <ORACLE_HOME>\orant\forms60\java directory. This will place the class files for the JavaBean in the location where the Oracle Form Builder can locate them at development time.
* Place the JavaBean JAR file (CalendarWidget.jar) in the codebase directory being used to deploy Oracle Forms Server 6i applications. This will allow the client machine to download the class files for use at runtime.
* Modify the HTML page being used to launch the Oracle Forms application to reference the JAR file in the ARCHIVE tag. This should be in addition to the standard Oracle Forms Server JAR Files and notifies the client JVM which archive files it must download before starting the application.
<ARCHIVE = "f60all.jar, CalendarWidget.jar">
Thanks

Kevin,
Is your Forms 6i application deployed to the web or is it Client/Server (CS)? If it is CS, this method will not work. If deployed to the web, then you need to modify the Forms configuration so it knows where your Java Archive (JAR) file is located.
In order to deploy your application to the web, you must have an Application Server. The following instructions apply to the Application Sever, not your development workstation.
>
* Copy the entire oracle directory and its subdirectories from the classes directory to the <ORACLE_HOME>\orant\forms60\java directory. This will place the class files for the JavaBean in the location where the Oracle Form Builder can locate them at development time.>
I'm not sure I totally understand why you would need to copy all of the class files to the <ORACLE_HOME>/FORMS60/JAVA directory, but OK. Typically, you just need to copy the .jar file to this directory. When deployed to the web, your Forms application is converted to a Java Applet. All of the Java files needed to perform this converstion and run your Form App are located in this directory.
>
* Place the JavaBean JAR file (CalendarWidget.jar) in the codebase directory being used to deploy Oracle Forms Server 6i applications. This will allow the client machine to download the class files for use at runtime.>
The Client workstations must have a compatible Java Runtime Environment (JRE) installed. Forms 6i is only compatable with Oracle's JInitiator and comes shipped with version 1.1.7.31. In order for your Calendar to work you must copy the CalendarWidget.jar file to the /FORMS60/JAVA directory.
>
* Modify the HTML page being used to launch the Oracle Forms application to reference the JAR file in the ARCHIVE tag. This should be in addition to the standard Oracle Forms Server JAR Files and notifies the client JVM which archive files it must download before starting the application.
<ARCHIVE = "f60all.jar, CalendarWidget.jar">>
I think this instruction is in error. The Jar files are typically listed in the /FORMS60/SERVER/formsweb.cfg file. Again, this change needs to be made to the file on the App Server. Open the formsweb.cfg and scroll to the USER PARAMETERS section. Find the ARCHIVE=, ARCHIVE_JINIT= and ARCHIVE_IE= variables and add ", CalendarWidget.jar" to each entry. (without the quotes - of course. :) )
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Similar Messages

  • Why is the last part of the Word Press install not working?

    I am installing Word Press to work in Dreamweaver. I have installed MAMP and everything is working fine, I assume. The location of the files are /applications/MAMP/htdocs/wp-content/themes/twentyten.
    I have installed PHP/MySql on my machine and have set up the wordpress database as instructed. The last part of the process has me bogged down. In following step one of the process, I get a blank screen. Here's the url: http://localhost/wp-admin/install.php and the instructions to complete the process.
    With the WordPress files copied to the correct location in the htdocs folder, the web server installed, and a database created, open a browser and browse to http://localhost/wp-admin/install.php.
    A screen telling you to create a configuration file will appear. Click the Create a Configuration File button.
    Click the Let’s Go button to go to a page that allows you to enter your database information.
    Type your database name, wordpress.
    Type your MySQL user name and password (usually the user name and password are both admin, unless you changed them in the database).
    For the Database Host type localhost.
    Click Submit
    Can anyone help?
    Thank for your help,
    GWalton55

    I'm stuck installing virtualhosts in DW and using Wordpress templates, but I may be a few steps further than you are, so I'll try to help. I'm also using Windows, so who knows?
    I'm assuming you are not using a virtual host, just a local host; therefore, I went to the section that has instructions for the steps you are on in David Powers' "Adobe Dreamweaver CS5 with PHP: Training from the Source" and right after he has you launch the browser and open "wordpress/wp-admin/install.php" in "your [site name here] site." He goes on to write:
         The URL depends on how you set up your testing environment:
    Virutal host: http://[site name here]/wordpress/wp-admin/install.php
    Localhost: http://localhost/[site name here]/wordpress/wp-admin/install.php
    NOTE: if you are using the MAMP default ports on a Mac, add :8888 after [site name here] for a virual host, or after a localhost.
    So perhaps that's what you're missing, I really don't know.
    Good luck!

  • Elements 9 Projects plays fine on computer however when burned to a DVD it drops the last part

    Hello,
    this is my first post and first Question ever on Adobe site. I hope thatt someone can help. I have used Elemenys 3.0 for a number of
    years. I have now upgraded to Elements 9. I am having an odd problem with a project that I am working on. Everything seems to be OK on the EDIT
    and on  the DVD PREVIEW mode ; However when burned to a DVD, I am loosing the last part of the project, and the laat  scene button does not take me to the correct scene, It takes me to the one just BRFORE it. When the burning process is done, it shows that it all went well. No error messages. Does anyone have any thoughts as to what is causing this?

    hi photonutguy,
    Since your question is about burning your video to a DVD disc, it is actually an Adobe Premiere Elements question. This forum is specifically about Photoshop Elements and is frequented by people who use Adobe Photoshop Elements for their photos.
    there is a separate forum for Adobe Premiere elements where you will find the people knowledgeable in the video process for burning that DVD with menus at
    http://forums.adobe.com/community/premiere_elements
    So  I recommend that you post your question at that Premiere Elements forum .

  • When i sync my iphone5 on my computer with itune the last part does not stop sync download safari i dont know why is not sync and i cant stop it i am try to download some song and this thing cant stop sync help?

    when i sync my iphone5 on my computer with itune the last part does not stop sync download safari i dont know why is not stop sync and i cant stop it i am try to download some song and this thing cant stop sync help?

    Hi,
    /Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
    Move the Safari app from the Desktop to the Applications folder.
    Restart your Mac.
    That's why you see this:
    When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
    After your restart your Mac, click the Apple  menu (top left in your screen) then click:  Software Update ...
    Carolyn  

  • Z Tcode doesn't write the last part of program

    Hi experts,
    I have a program in a transaction code, and the last part, must be write:
    Send it to the world
        lv_sent_to_all = lo_send_request->send( i_with_error_screen = 'X' ).
        IF lv_sent_to_all = 'X'.
          WRITE 'Email Sent Successfully'.
        ENDIF.
        COMMIT WORK.
      CATCH cx_document_bcs INTO bcs_exception.
        WRITE: 'Error Occurred'. WRITE: 'Error Type', bcs_exception->error_type.
        EXIT.
    ENDTRY.
    If I execute only the program, the write works correctly.
    But if I execute the tcode (X) with the program, no write is working.
    Someone knows about it??? Why is working if you execute the program and not when you execute the transaction??
    thanks you very much!

    Its simple. While creating transaction code in SE93, u might have selected radio buton Program and screen (dialog transaction)
    It should be 2nd option Program and selection screen (report transaction)
    Create another transaction code selecting radio buton Program and selection screen (report transaction) and run the transaction code. It will work

  • I wish I could remember what exactly happenned the last time I upgraded iphoto years ago, but something

    I wish I could remember what exactly happenned the last time I upgraded iPhoto years ago. Did my address book go kaflooey? But whateverit was, it discouraged me from any updating eversince.  Believe it or not, I have been limping along with Iphoto 6.0.6 and basically faring fine, given my needs.  But I would now like to be able to order prints from my photo library -- and you can't do that any longer with 6.  So my question is:  what are the things that
    can go wrong with the later systems?  And is there any way around having that happen?

    Make a back up.
    Make a second.
    Upgrade. Get on with your life.
    Regards
    TD

  • Can anyone explain in detail the option: "sound enhancer"?

    Can anyone explain in detail the option: "sound enhancer"?

    On what level should I put the slider (middle, maxim, disable or else)?
    Whatever sounds best for you.
    o the stereo sepparation will make what ? The centralpoint of the voice will be wider?
    Yes. Seems to add a bit of 3D/reverb.

  • Does anyone know what time the last episode of Breaking Bad starts streaming

    Deos anyone know what time the last episode of Breaking Bad starts streaming on itunes?

    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.

  • Could anyone tell me whether the ios7 for ipad with retina display comes with flash,compass and calculator!? Because mine has none!

    Could anyone tell me whether the ios7 for ipad with retina display comes with flash,compass and calculator!? Because mine has none!

    ravelvanto wrote:
    Could anyone tell me whether the ios7 for ipad with retina display comes with flash,compass and calculator!? Because mine has none!
    Hi ravelvanto,
    mine too (iPad 3/WiFi) hasn't this features.
    Especially the flash can't be realized because there is a simple lack of a flash light.
    Why there is no compass, calculator (I'm using the Wolfram App instead), or the weather app etc. I don't know...
    Best regards, mackevin

  • Has anyone pre-ordered in the last 48hrs

    Hey everyone has anyone pre-ordered in the last 48 hours on either Apple's website or VZW website? If so what kind of turn around time have you seen as far as expected shipments and so forth....
    This post is not to complain or anything just interested in what everyone else is seeing so take it with a grain of salt!

    I almost did but decided to wait til I can actually try one in the store. I wouldn't buy a car without taking it for a test drive first. Just me though.

  • Could anybody explain what  is the difference between cloning and refresh

    Hi,
    Could anybody explain what is the difference between cloning and refresh
    What exactly we do in only E-business suite clone(Database and applications) and only database clone and refresh
    Regards,
    ravi

    Welcome to the forum,
    Database Cloning includes cloning the ORACLE_HOME of the database and the copying of data from source to target instance.
    Database Refresh includes copying of data from source to target instance. ORACLE_HOME is not copied during a Database refresh.
    Similarly Apps cloning includes cloning the techstack, i.e the 806, iAS homes along with APPL_TOP, COMMON_TOP and the Database
    Apps refersh is again copying the database from source to target. The techstack or the APPL_TOP or COMMON_TOP are not copied during an Apps refresh
    see this post
    http://sabdarsyed.blogspot.com/2008/08/cloning-and-refreshing-oracle-database.html

  • The theme/background (AWESOME futuristic space scene) shown in the last part of "Getting Started video available for download?

    In the last part of the video "Getting Started" right after I downloaded Firefox 4, there was a background scene of an awesome page that showed some futuristic space scene that has the mozilla theme (fox) in the picture. I would like to know if it is available for download and/or it's name. I searched through the themes, but they don't show enough of the theme to actually see what the background would be once downloaded. Thank you in advance for any help you can offer.
    Gina Taylor

    Maybe you like this video as well:
    * http://vocamus.net/dave/?p=1233 Flight of the Navigator
    * http://videos.mozilla.org/serv/mozhacks/flight-of-the-navigator/
    * http://blog.vlad1.com/2010/12/21/webgl-in-firefox-4-beta-8/

  • Could anyone explain the question i faced about required language?

    i got an interesting question about the language.
    how to define required language in SO/DN/TO document
    could anyone help me?
    when i was creating a SO and DN, the system warned me :
    "Material *** is not defined for sales org.**,  distr.chan.*, language ZH"
    than i changed the material language to ZH in additional data.
    the problem solved
    the question is when i was creating a TO(transfor oder), the system warned me
    "The material does not exist or is not activated"
    then i tried many ways to solve the problem, but they didn't work,
    today i changed the material language back to EN, then the problem solved, I can save the TO.
    but i can't explain why, i am a little confused.
    could anyone told me? thanks a lot. 
    how to define required language in SO/DN/TO document

    Hi Lee,
    Change the language to en at Sales org. & plant level.
    For SO :- Goto SPRO -> ENTERPRISE STRUCTURE-> definition ->sales & distribution-> check,copy sales org. ->
    select your sales org. & goto address (shift+F5), change the language to EN
    For Plant :- Goto SPRO -> ENTERPRISE STRUCTURE-> definition ->logistics general->define plant-> select you plant &
    goto address (shift+F5), change the language to EN.
    Regards
    San

  • I have an iPhone 5.  always before when i called someone..or they called me the picture of them would take up the whole screen.  I LOVED it!  I could see it.  Since the last update it is just a little "bubble" in the upper right hand corner.  Can i change

    Hi  I have an IPhone 5.  Always before when I called someone...or they called  and I had a pic set up for them in my contact list..... it would pop up the full size of the screen.  I LOVED it!  I could actually see it.  Now...since the last update...or maybe the one b4 that.... The pic is just a little bubble that floats to the upper right hand corner.  Does anyone know if there is a way I can get that full size pic back?

    I'm sorry, there is no way to change that. It is a change with the newer iOS 7. You can provide feedback to Apple, like a large group of others have that are disappointed in this at www.apple.com/feedback and click on the appropriate link.

  • Could anyone explain THAT???

    Hi guys, well I was heaving a lot of trouble with my 13 macbook, after it went back from the tech support to fix the famous ramdon shut downs it started to have random slowdowns, I went to an age of exploring mainatence tools, I went trought wall of them, onyx, disk warrior, tech4, iDefrag, I reseted the pram the vram , and nothing. I did a clean reinstall of the system, updated, I got smcfancontrol to set my fans to max speed (it could be the hot weather making the processor slow by temperature) but nothhing could get me away from the rainbow beachdisk of death. But then I decided to try windows xp with bootcamp, and guess what?? Perfect smothness, even with hardcore cpu usage. Could anyone just give me an idea of what this could be?? By the way, last week my battery just died (another usual mac defect) and I had to call the stupid tech guys again that never help me and guess what, one month and apple dont even reply me. but ok, thats another thred, can anyone just wonder why macbook works fine with xp?

    these are very intense slowsdowns, that makes impossible to continue to work, it makes you stuck for minutes in each action you take. These slowdowns didnt exited when I bought the macbook, and now they appear even if I am just surfing the web with 1 windows in some simple sites.
    The only explanation I can imagine is some kind of conflict between the new logic board the tech guys instaled to fix the random shutdown, but some kind of issue somewhat related to the osx too, this is too wierd, apple is a big lie, there is a big worm inside this apple, this is pure marketing bulshit, I will never buy an apple produtc, and I know that a lot of people are having terrible experiences with all apple produtcs. They could have been something in the late 80 and begining of the 90, but now they are totaly crap, I wish I could just recive my money back. Apple is just a fancy toy for grown up kids, it is not a pro tool. it is a toy

Maybe you are looking for