Could not obtain a maintenance-read + write-Lock for DBQueue/QStream/jobID

Hi All,
Does anyone know what does this error mean?
com.sap.b1i.xcellerator.XcelleratorException:
XCE001 Nested exception: com.sap.b1i.xcellerator.RejectedException:
XCE061 Could not obtain a maintenance-read + write-Lock for DBQueue/QStream/jobID Q.INB_IQ_INTQ_ASYN_QS.0010000000
Regards
Szymon

You see that's the thing, I'm not using it for a picture camera. The camera prob wouldnt read the card anyway. I'm using it as a storage device for my Nintendo Wii, I have files that I put on there to use as channels for my Wii Home Screen.

Similar Messages

My MacBook w/ OSX 10.6.8 cannot access my external Time Machine Backup USB Drive. It says it is a Read Only drive. When I went to change permissions I found all pernissions were listed as "Custom" and I could not reset them to "Read Write". Any help!

My MacBook w/ OSX 10.6.8 cannot access my external Time Machine Backup USB Drive. It says it is a Read Only drive. When I went to change permissions I found all pernissions were listed as "Custom" and I could not reset them to "Read Write". Any help would be appreciated.

This can be done easily with ethernet.
Please follow the instructions strictly.
To make it easier I want you to do this overnight so you can turn off all your current connection to the internet.
Just go to the airport fan in to the top right and turn airport off.
Get ethernet cable and connect the laptop to the TC lan port.. ie <-> ones.
Press and hold the reset on the TC for about 10sec. until the front led flashes rapidly.
Open the airport utility.. go to manual setup and change the wireless to off. (so other people around you cannot join your network of one).
Ignore all the errors.. they won't stop the backup working.
Go to the TM and reselect the backup target disk as the TC.
It should start after 2min and run through to completion.
That is it.. for a backup of many GB it might take a few hours.. so make sure the laptop has power plugged in and the sleep is off.. (on early ones I think this is needed but I am a late arrival to the scene).. sleep doesn't affect later OS.

10.9 Server, you do not have the necessary read.write permissions for Time Machine Service

Setting up 10.9 Server's Time Machine service when I try to backup from a computer on my LAN I get "you do not have the necessary read,write and [sic] append privileges on the selected network backup disk."
I am logging in as the admin user for the OS X Server install.
Confused.

You need to mount the sharepoint as its owner.

Help with a fcpx library that is locked "could not be opened. Read-only file system"

Hi all,
I recently moved all my fcpx projects/events to a new Harddrive - I thought I did this correctly by copying/duplicating all projects/events from within FCPX.
When I last used FCPX all the projects/events were there - no issues. Also, when I look at package contents - everything is still there in terms of events and file sizes.
All the library files are on an external hard drive, on an encrypted disk image. Now a week later I have tried to open FCPX and I get the following error
"The document “MND_Z_FCPX” could not be opened. Read-only file system" and nothing will open.
Have checked permissions - these all seem in order. OSX is10.9.5
Any suggestions as to what might be the issue?
Thanks in advance.
R

the permissions themselves look ok - they have my two computer profiles as read/write. I also note that on some occasions the library has opened in my other Computer profile, but not in the one that I want it to open.
So I think you're right, there is something with permissions happening here. I keep a work and personal computer profile.
Don't know how it happened - but the volume is definitely Read Only - even though I've created a Read/Write permissions for it

PS CS4 could not save because the file is locked

I saw this post, my problem is very similar, but this solution does not solve my problem:
http://forums.adobe.com/message/2121454#2121454
Everytime I try to save a photoshop file I get the "Could not save becasue this file is locked" -- and then I go to save again and it does save, becasue the file has disappeared from where I had originally saved it!
This is VERY irritating, as it is not happening EVERY time I try to save a photoshop file.
In reference to the previous post about this, I do not use Spotlight, and often I do not have anything else open when working on these photoshop files.
I am using CS4, and this occurs when saving files both on and off a server.
I am afraid I will at some point end up losing a file.
Any suggestions?

No anti-virus software (they cause far more problems than they solve, at least on a semi-secure network), I don't leave Bridge running. iTunes is running, so is InerTrak (time tracking software)... so it has to be Spotlight or Time Machine unless Activity Monitor will lock files. Or it could be Quicksilver, which creates indices like Spotlight.
First thing I'm doing is adding all my hard drives to "Prevent Spotlight from searching these locations" and we'll see if this comes up again.
Could it be the Finder? Does the Finder lock the file while reading the thumbnail?
I'm surprised that there's no way to tell what process has locked the file.
OK, last bit: Why doesn't Photoshop lock the file when it's open so that other programs won't open it?

Error of "Could not save (file name) because write access was not granted

Error of "Could not save (file name) because write access was not granted. The users are pulling the files from a Mountain Lion server. They all have read\write access. If they try to save the file in the same directory they get that error but they can save it anywhere else on the sharepoint. If they save it in another directory then reopen it make a change and do a save as they can save it back to the original directory. Has anyone else come across this same issues

It is an enterprise solution. I just do not see why you cant save directly to the server. It seems to get weird errors. Some Adobe stuff saves fine on the server and some of it doesnt. It seems Adobe related. The permissions on the server are set correctly so it isnt a permission error

Could you explain how the read-write-backing-map-scheme is configured in...

Could you explain how the read-write-backing-map-scheme is configured in the following example?
<backing-map-scheme>
    <read-write-backing-map-scheme>
     <internal-cache-scheme>
      <class-scheme>
       <class-name>com.tangosol.util.ObservableHashMap</class-name>
      </class-scheme>
     </internal-cache-scheme>
     <cachestore-scheme>
      <class-scheme>
       <class-name>coherence.DBCacheStore</class-name>
       <init-params>
        <init-param>
         <param-type>java.lang.String</param-type>
         <param-value>CATALOG</param-value>
        </init-param>
       </init-params>
      </class-scheme>
     </cachestore-scheme>
     <read-only>false</read-only>
     <write-delay-seconds>0</write-delay-seconds>
    </read-write-backing-map-scheme>
</backing-map-scheme>
...Edited by: qkc on 30-Nov-2009 10:48

Thank you very much for reply.
In the following example, the cachestore element is not specified in the <read-write-backing-map-scheme> section. Instead, a class-name ControllerBackingMap is designated. What is the result?
If ControllerBackingMap is a persistence entity, is the result same with that of cachestore-scheme?
<distributed-scheme>
            <scheme-name>with-rw-bm</scheme-name>
            <service-name>unlimited-partitioned</service-name>
            <backing-map-scheme>
                <read-write-backing-map-scheme>
                    <scheme-ref>base-rw-bm</scheme-ref>
                </read-write-backing-map-scheme>
            </backing-map-scheme>
            <autostart>true</autostart>
        </distributed-scheme>
        <read-write-backing-map-scheme>
            <scheme-name>base-rw-bm</scheme-name>
            <class-name>ControllerBackingMap</class-name>
            <internal-cache-scheme>
                <local-scheme/>
            </internal-cache-scheme>
        </read-write-backing-map-scheme>

Could not save "IMG_5116.psd" because write access was not granted.

"Could not save “IMG_5116.psd” because write access was not granted." i keep on getting this error message why/?????

nimrod levy,
It seems like a permission issue. Grant 'write and read' permission to the file.
MAC : Right click on the file > click on "Get Info"
scroll to the bottom "Permissions" > unlock it > set permission as "Write and read" to all the users.
Win: Right click on the file > "Properties".
Uncheck "Attributes: Read only".
Go to 'Security' tab > 'Edit'
Give full control check all in "Alloy" column; uncheck all from deny column if any to all the users.

RMAN-06403: could not obtain a fully authorized session

Hi,
I am trying to duplicate 10204 instance with ASM to clone machine .
I have checked that i can connect to the target / aux / rman instances before runing the duplicate script as you can see bellow.
Also i checked that the Env. variable are correct :
$ ps -ef | grep pmon
oracle    5157     1 0 Feb16 ?        00:00:17 asm_pmon_+ASM
oracle   30838     1 0 17:15 ?        00:00:00 ora_pmon_b3dev
$ echo $ORACLE_HOME
/software/oracle/B3DEV10gR2
$ echo $ORACLE_SID
b3dev
-- AUX
$ sqlplus sys/xxxx@b3dev as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:25 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
-- TARGET
$ sqlplus sysxxxx@MYB3PROD as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:44 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
-- catalog
$ sqlplus catman_b3prd/xxxxx@rman
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:59 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsI opened the AUX instance in NOMOUNT mode , and then run the rman script.
rman TARGET sys/xxxx@MYB3PROD CATALOG catman_b3prd/xxxx@rman AUXILIARY sys/xxxx@b3dev
RMAN>
run
allocate channel 'dev_0' type 'sbt_tape'
parms 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=b3prd,OB2BARLIST=b3prd)' maxopenfiles 16;
set until time "to_date('17-11-2010 10:45:00','dd-mm-yyyy hh24:mi:ss')";
duplicate target database to b3dev
PFILE = /software/oracle/B3DEV10gR2/dbs/initb3dev.ora
NOFILENAMECHECK;
}Then I got the following error:
Starting Duplicate Db at 21-NOV-10
released channel: dev_0
released channel: dev_1
released channel: dev_2
released channel: dev_3
released channel: dev_4
released channel: dev_5
released channel: dev_6
released channel: dev_7
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/21/2010 17:14:20
RMAN-06403: could not obtain a fully authorized session
RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not availableThanks

Thanks ,
But its not seems to be my case:
SQL> startup nomount pfile='initb3dev.ora';
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size                  1271616 bytes
Variable Size             301992128 bytes
Database Buffers          763363328 bytes
Redo Buffers                7114752 bytesrman TARGET sys/xxxxx@MYB3PROD CATALOG catman_b3prd/xxxx@rman AUXILIARY sys/xxxx@b3dev
Recovery Manager: Release 10.2.0.4.0 - Production on Sun Nov 21 17:34:27 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: B3PRD (DBID=3967311322)
connected to recovery catalog database
connected to auxiliary database (not started)
No problem to connect using sqlplus with @ .
No problem to connect with RMAN , to target/AXU/RMAN catalog
Yet , i am still getting the error message
Thanks

Q. Reader-Writer lock across unrelated processes?

What mechanism would you suggest to implement Reader-Writer locks across unrelated processes?
Though the documentation for pthread_rwlock_ functions state
Synchronization Across Process Boundaries
Each of the synchronization primitives can be set up to be used across process
boundaries. This is done quite simply by ensuring that the synchronization variable is
located in a shared memory segment and by calling the appropriate init() routine,
after the primitive has been initialized with its shared attribute set as interprocess.
but they work only if the processes are forked off from a given process which initialized the relevant synchronization variable and not if the processes are totally unrelated.

What mechanism would you suggest to implement Reader-Writer locks across unrelated processes?
Though the documentation for pthread_rwlock_ functions state
Synchronization Across Process Boundaries
Each of the synchronization primitives can be set up to be used across process
boundaries. This is done quite simply by ensuring that the synchronization variable is
located in a shared memory segment and by calling the appropriate init() routine,
after the primitive has been initialized with its shared attribute set as interprocess.
but they work only if the processes are forked off from a given process which initialized the relevant synchronization variable and not if the processes are totally unrelated.

IBooks crashes on startup - Could not obtain real path to the container root

Hello,
I was able to open up iBooks when I first installed Mavericks, but now it will not launch. I get the menu bar items and then it throws an alert "Couldn’t communicate with a helper application. Try your operation again. If that fails, quit and relaunch the application and try again."
I also pulled the logs from the console
1/12/14 12:44:01.759 PM xpcd[77241]: com.apple.BKAgentService[5053]: registration request failed: (0x11, 0x0) Could not obtain real path to the container root (~/Library/Containers/com.apple.BKAgentService/Data): The operation couldn’t be completed. No such file or directory
1/12/14 12:44:02.035 PM com.apple.launchd[1]: (com.apple.BKAgentService[5053]) Job appears to have crashed: Illegal instruction: 4
1/12/14 12:44:02.035 PM com.apple.launchd[1]: (com.apple.BKAgentService) Throttling respawn: Will start in 10 seconds
1/12/14 12:44:04.579 PM com.apple.launchd[1]: (com.apple.BKAgentService) Throttling respawn: Will start in 8 seconds
1/12/14 12:44:12.936 PM com.apple.launchd[1]: (com.apple.BKAgentService[5081]) Job appears to have crashed: Illegal instruction: 4
1/12/14 12:44:12.936 PM com.apple.launchd[1]: (com.apple.BKAgentService) Throttling respawn: Will start in 10 seconds
... and goes on and on until click ok on the alert.
All updates installed. The only thing in '~/Library/Containers/com.apple.BKAgentService' is Container.plist
Any ideas?

Start "Terminal" and type:
mkdir ~/Library/Containers/com.apple.BKAgentService/Data"
It will add a missing folder that is needed.
iBooks should now launch.
I've had a lot of similar errors after restoring from Time Machine. I've also had to do the same things for quick look, "com.apple.quicklook.ui.helper" and "com.apple.lateragent", and iPhoto "com.apple.iPhoto".
After creating the Data subfolders they'd all miraculously launch!

Changing from dev to standard edition causes "Could not obtain information about Windows NT group/user error code 0x6e."

Hello,
We recently upgrade our SQL Server 2012 SP1 (64bit) dev edition to standard edition, after we purchased the required licence and it was deployed in production.
Since the edition change, we are now receiving the following error, with some of our jobs, which have an e-mail step in them, which is causing the jobs to fail.
Msg 14661,Level 16, State 1, Procedure sp_send_dbmail, Line 517
Query execution failed: Msg 15404, Level 16, State 19, Server BL-SVR15, Line 1
Could not obtain information about Windows NT group/user 'BLUELIZARD\savaa', error code 0x6e.
Any ideas how to fix this issue? We were also having a similar error, when executing the jobs, but changing the job owner to SA has fixed this issue.
Thanks,
Andy.

Hi,
Which user account you used for SQL Server service, domain account or local account?
If it is domain account, are you able to log in to a machine with it?
Make sure that the password of account is not expired.
Also, grant the user Allowed to Authenticate permission and see how it helps.
Refer to the below article:
http://geeks.ms/blogs/ozonicco/archive/2013/01/14/208266.aspx
Thanks.
Tracy Cai
TechNet Community Support

Hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit   I writ again my problem    i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5

On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
Apple Support Communities
Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
created by The hatter in Boot Camp - View the full discussion
This solved my question
This helped me
you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
This solved my question
This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5   Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
please help us by address site please please .....
<Edited by Host>

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

CS6 Could Not Save "filename" Because File is Locked

For many years I have been edit photo montages in Premiere Pro. When I would find a photo that needs retouching so I would open Photoshop, retouch the pic, save it, and the new image would magically appear on the PPro timeline. But in my CS6 suite, I get the error message "Could not save "filename" because file is locked, you do not have necessary access permissions, or another program is using the file". And this only happens when PPro is still open, regardless of where the CTI is on the timeline, or which pic on the timeline is selected. I never had this problem with any other versions of PPro and Photoshop. I don't want to shut down PPro everytime I need to retouch a pic.

That sounds like you've found a bug in PPro where it keeps the files open and locked when it shouldn't.
Unfortunately, you posted in the Photoshop forum where we can't help much with Premiere.
You probably want to post in the Premiere forum: http://forums.adobe.com/community/premiere/premierepro_current

File transport does not have read/write privileges for receive location???

Hi all.
I try to read an EDI-file from a file location.
In configured the receive location but when I enable it I get an error message in the log saying:
File transport does not have read/write privileges for receive location "Location" (Event ID: 7183)
The location is correct (I used the browse option) and the folder is shared with all users (full access for everybody).
How can I get rid of this error

There can be many reasons for this error. First of all try the KB article http://support.microsoft.com/kb/888498 . Then try the solution on this link http://bluebiztalk.blogspot.com/2008/05/file-transport-does-not-have-readwrite.htmlAbdul Rafay
http://abdulrafaysbiztalk.wordpress.com/
Please mark this as answer if it helps

Could not obtain a maintenance-read + write-Lock for DBQueue/QStream/jobID

Similar Messages

Maybe you are looking for