Counting rows on table with TEXTIMAGE_ON

For many-columned fixed length files I created and loaded this table:
CREATE TABLE [dbo].[Fixed_Length_Text_Files](
[Line] [text] NULL,
[Text_File_Id] [bigint] NULL,
[ID] [int] IDENTITY(1,1) NOT NULL,
CONSTRAINT [Fixed_Length_Text_Files_ID] PRIMARY KEY CLUSTERED
[ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
Any way to get a row count on this table for a specific text_file_id?
Because of the text column, the result is always 0.
Thanks,
Jnana
Jnana Sivananda

Select count(*) just gets 0, filtered or not.
Someone suggested Select count(1).
I'm going to try that.
Thanks,
Jnana
Jnana Sivananda

Similar Messages

Comparing count of one table with another

Hi,
I want to compare the number of rows in three tables with the number of rows in another table and see if they are equal
Here is what I have so far:
SELECT decode(the_count,100,1,0) from (select sum(num_rows) as the_count from user_tables where table_name in('LOCATION','DEPARTMENT','JOB'));
This compares the number of rows with 100. If they equal 100m, then 1 is displayed, otherwise 0.
I want to compare the_count with the result of select(num_rows) as other_count from user_tables where table_name='EMPLOYEE';
Any suggestions?

it is better to use the actual table.
select decode(cnt1.the_count,cnt2.other_count,'Number of rows equal','Number of rows not equal') comment
    from (select sum(row_cnt) the_count
            from (select count(*) row_cnt
                    from job
                  union all
                  select count(*) row_cnt
                    from salary_grade)) cnt1
          select count(*) other_count
            from price) cnt2;

Need to create a new row in table with same data as Primary key, but new PK

Hello Gurus ,
I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
Any ideas of how it can be done without much complication?
Thanks in advance for your reply.
Reards,
Swapneel Kale

user9970447 wrote:
Hello Gurus ,
I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
Any ideas of how it can be done without much complication?
Thanks in advance for your reply.
Reards,
Swapneel Kalesomething like
insert into mytable values ('literal for new pk',
                                       select non-pk-1,
                                                non-pk-2,
                                                non-pk-n
                                       from mytable
                                       where pk-col = 'literal for existing pk')

JSF: Problems adding rows to table with custom method

Since this being my first post, I find it only appropriate to thank the development team for such a huge addition to the application development world. You guys rock. You have cured my Java identity crisis. That being said...
I have been stumped for days. I'm making a simple web cart. I am trying to get two string values (name and price) passed through a custom exposed application module method ran on a backing bean. What I want the exposed VO module to do is, upon receiving the two strings, create a new row on the empty data controlled table I have built to store them. Basically I just need to add rows to a table with my custom managed bean. Most recent version.
I have written a test method to make sure my backing bean and exposed app module impl were working. This test works:
//WORKS
//CartInfo.java
    public String cb1_action() {
        AppModuleImpl am = new AppModuleImpl();
        am.testMethod();
        return null;
//AppModuleImp.java
    public void testMethod() {
        System.out.println("WORKS");
    }I found some code on how to add rows and unfortunately it isn't working out for some reason. Here is what is producing the error "Caused By: java.lang.NullPointerException" :
//DOESN'T WORK IN CUSTOM METHOD BUT WORKS WHEN DRAGGED ON TO THE PAGE AS A COMMAND BUTTON
//CartInfo.java
    public String cb1_action() {
        AppModuleImpl am = new AppModuleImpl();
        am.testMethod("test", "test");
        return null;
//AppModuleImp.java
       public void testMethod(String pName,String pPrice) {
        ViewObjectImpl vo = this.getCartVO1();
        Row r = vo.createRow();
        r.setAttribute("NAME", pName);
        r.setAttribute("PRICE", pPrice);
        vo.insertRow(r);
//The VO attributes for the DC are:
// Name : Type : Alias Name : Entity Usage : Info
NAME : String : NAME : (blank) : Transient
PRICE : String : PRICE : (blank) : TransientSo what I have so far is a table linked to my database. A user can select and click on a product on the row's individual Add button and using a modified selection listener, it returns the values to the backing_bean.
Then what I want it to do is have those variables passed to the other table. I just can't put it together.
Please if there is anyone that could send me in the right direction I would greatly appreciate it!
Thank you,
Jack

if i understand you, you want to call application module method when user clicks on add button on the UI and your table is from VO
so what i can come up for now is:
1) create variable binding from the iterator for both name and price.
2) on your UI action button :
<af:commandButton actionListener="yourbean.addToCart">
<f:attribute name="pName" value ="binding.<created name bind variable>"
<f:attribute name="pPrice" value = "binding.<created price bind variable>"
</af:commandButton>
3) custom Managed Bean:
//yourBean.java
public void addToCart(ActionEvent e){
// get binding here
// use executeWitParams method to send parameter to the function "testMethod" and execute
//AppModuleImp.java
public void testMethod(String pName,String pPrice) {
CardVOImpl vo = this.getCartVO1();
CardVORowImpl r = (CardVORowImpl)vo.createRow();
r.setAttribute("NAME", pName);
r.setAttribute("PRICE", pPrice);
vo.insertRow(r);
Hope this helps...
Let me know if not..
Thanks
Edited by: MavenDev on Oct 30, 2011 8:08 PM

Understanding logminer results -- inserting row into table with CLOB field

In using log miner I have noticed that inserts into rows that contain a CLOB (I assume this applies to other LOB type fields as well, have only tested with CLOB so far) field are actually recorded as two DML entries.
--the first entry is the insert operation that inserts all values with an EMPTY_CLOB() for the CLOB field
--the second entry is the update that sets the actual CLOB value (+this is true even if the value of the CLOB field is not being set explicitly+)
This separation makes sense as there may be separate locations that the values are being stored etc.
However, what I am tripping over is the fact the first entry, the Insert, has a RowId value of 'AAAAAAAAAAAAAAAAAA' which is invalid if I attempt to use it in a flashback query such as:
SELECT * FROM PERSON AS OF SCN #####' where RowId = 'AAAAAAAAAAAAAAAAAA'The second operation, the Update of the CLOB field, has the valid RowId.
Now, again, this makes sense if the insert of the new row is not really considered "+done+" until the two steps are done. However, is there some way to group these operations together when analyzing the log contents to know that these two operations are a "+matched set+"?
Not a total deal breaker, but would be nice to know what is happening under the hood here so I don't act on any false assumptions.
Thanks for any input.
To replicate:
Create a table with CLOB field:
CREATE TABLE DEVUSER.TESTTABLE
        ID NUMBER
       , FULLNAME VARCHAR2(50)
      , AGE NUMBER
      , DESCRIPTION CLOB
       );Capture the before SCN:
SELECT DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER FROM DUAL;Insert a new row in the test table:
INSERT INTO TESTTABLE(ID,FULLNAME,AGE) VALUES(1,'Robert BUILDER',35);
     COMMIT;Capture the after SCN:
SELECT DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER FROM DUAL;Start logminer session with the bracketing scn values and options etc:
EXECUTE DBMS_LOGMNR.START_LOGMNR(STARTSCN=>2619174, ENDSCN=>2619191, -
           OPTIONS => DBMS_LOGMNR.DICT_FROM_ONLINE_CATALOG + DBMS_LOGMNR.CONTINUOUS_MINE + -
           DBMS_LOGMNR.COMMITTED_DATA_ONLY + DBMS_LOGMNR.NO_ROWID_IN_STMT + DBMS_LOGMNR.NO_SQL_DELIMITER)Query the logs for the changes in that range:
SELECT
       commit_scn, xid,operation,table_name,row_id
       ,sql_redo,sql_undo, rs_id,ssn
       FROM V$LOGMNR_CONTENTS
    ORDER BY xid asc,sequence# ascResults:
2619178     0C00070028000000     START                  AAAAAAAAAAAAAAAAAA     set transaction read write
2619178     0C00070028000000     INSERT     TESTTABLE     AAAAAAAAAAAAAAAAAA     insert into "DEVUSER"."TESTTABLE" ...
2619178     0C00070028000000     UPDATE     TESTTABLE     AAAFEXAABAAALEJAAB     update "DEVUSER"."TESTTABLE" set "DESCRIPTION" = NULL ...
2619178     0C00070028000000     COMMIT                  AAAAAAAAAAAAAAAAAA     commitEdited by: 958701 on Sep 12, 2012 9:05 AM
Edited by: 958701 on Sep 12, 2012 9:07 AM

Scott,
Thanks for the reply.
I am inserting into the table over a database link.
I am using the new version of HTML Db (2.0)
HTML Db is connected to an Oracle 10 database I think, however the table I am trying to insert data into (via the database link) is in an Oracle 8 database - this is why we created a link to it as we couldn't have the HTML Db interacting with the Oracle 8 database directly due to compatibility problems (or so I've been told)
Simon

How I can insert one row on table, with columns settings: readonly = true

I have a problem. (jdeveloper 11.1.1.2.0)
How I can insert row on table (EditingMode= clickToEdit), with columns settings: ReadOnly = true.
When I make click on button create insert, ADF create one row on the table with output text invisible ( ReadOnly = true.)
I make double click, then output text is visible (ReadOnly = false)
I dont want make double click. I want output text is visible (ReadOnly = false), when I make click on button create insert
Thanks

Hi,
try changing the edit mode of the table when pressing the button and refresh the button. This of course turns the whole table into editable mode, but this is how it needs to work. Alternatively, you create an input form for the user to edit the new record and show the form in a popup or beneath the table. Then when the user submits the created row data, you refresh the table to shwo the new row
Frank

How to hightLight selected row in table with version 10.1.3 ADF

Hi there
I am experiencing a difficulty in getting the radio selected table row to be highlighted with 10.1.3 Jdeveloper.
i had looked it an example from this blog --
http://adf-rk.blogspot.com/2007/01/adf-oracle-form-like-overflow-in-adf.html
it worked, but the problem is that it does highlight the table cell's data background , but it doesn't hightlight the whole row.
can anyone have any idea of how to get the whole row working?

By setting the server platform,
<server-platform xsi:type="oc4j-1012-platform">
</server-platform>
you are enabling JTA integration and the external transaction controller. So if your data-source "jdbc/OracleDS" is a JTA datasource and the JTA transaction is being set to roll back then the insert should not get committed.
Verify that you are not trapping the exception further up causing the SessionBean not to rollback the transaction. Also turn on TopLink logging to verify what is occurring.
The active UnitOfWork uses the default connection pool, so your
<name>NamedConnectionPool</name>
is not required unless you are using it some other way?
Also when using JTA "uow.commit();" is not required, the JTA transaction is responsible for committing the unit of work.

Highlighting corresponding rows in table with mouseover

I have a requirement where I need to highlight multiple rows that are logically grouped together in a table. I was thinking of accomplishing this by:
1. Add an invisible column to the table.
2. Set the column's StyleClass in the code to some indicator.
3. Add a client listener to the table/row?? of type mouseover to identify the row being hovered over.
4. In Javascript, select all the rows that have the same StyleClass as the row being hovered over and set their background color.
I am having trouble with step #3 because I am unable to add the client listener to a table/row to identify the row that is hovered over. Note that the user is not clicking on the row so I cannot use the "current row".
If there is no way to identify the row, is there any other way to highlight multiple rows on mouseover?
I am using JDeveloper 11.1.1.5.
Thanks.

Hi Frank, I tried adding the clientListener to each cell renderer component but the problem I noticed with that was that the cell components do not always occupy the entire width of the column so the user has to hover over the cell which may be a tiny part of the cell.
I did however find an alternate solution using JQuery. So instead of adding the client listeners to each component, I added a JQuery .hover() function on document load. Below is the javascript that is loaded on the page load.
<af:resource type="javascript">
function initialize()
//the class name that will be looked at in the DOM and highlighted
var classToHighlight = "";
//TODO will need to use .live("hover") if using PPR on the page
$('.columnClass').hover(
function(data)
$($(this).attr('class').split(' ')).each(function()
if (this !== '')
if ( this.indexOf("bgHighlightClass") == 0 )
classToHighlight = this;
$("." + classToHighlight).css('background-color', 'orange');
function(data)
$("." + classToHighlight).css('background-color', 'white');
classToHighlight = "";
</af:resource>
<af:clientListener method="initialize" type="load"/>

Default select rows in table with checkbox

I want to display a datatable that has checkboxes in one of it s columns to select a row. How can I programatically select some checkboxes in the table when the page renders for the first time...
I tried the following below but was able to only get the row highlighted...is there a way to mark the checkbox as selected for that row ?
public void prerender() {
RowKey[] RK = this.objectArrayDataProvider1.getAllRows();
for (int i= 0; i< RK .length; i++ ){
this.getSessionBean1().getTablePhaseListener().setSelected(RK, new Boolean(true));
//THE ABOVE ROW ONLY HIGHLIGHTS THE ROW AND DOEs NOT MARK THE CHECKBOX AS SELECTED.
Thanks in advance for any help.
- Lakshmi

Hi,
For items created using APEX_ITEM.HIDDEN(), null values are ok
As far as I can see, there is nothing wrong with the SQL statement. I have just set up a test page [http://apex.oracle.com/pls/otn/f?p=267:189] using the following SQL:
select APEX_ITEM.CHECKBOX(1,EMPNO) " "
      , APEX_ITEM.HIDDEN(2, JOB) || ENAME "JOB_ENAME"
      , APEX_ITEM.HIDDEN(3, DEPTNO) || NVL(SAL,0) "DEPTNO_SAL"
from EMPI don't have your tables, so have used EMP instead, but the structure of the code is the same.
If you click the Submit button, you will see the submitted data shown next to F01, F02 and F03 at the top. Some of the EMP records do not have JOB values, so you will see that the F02 contains empty values for these - but F02 and F03 contain the same number of values (empty or not). F01 will only contain a value if the checkbox has been ticked.
Andy

Excel data transfer into SAP internal table with GUI_UPLOAD

hi all,
i m using SRM4 system and i wanted to develop one report which will upload data from excel and convert it into IT.
i know that many threads are posted on this topic.
but my requirement is slight different. in the system only one function module is available that is "GUI_UPLOAD" and we want that user shd not save file as tab delimited before calling this fm. instead, program shd take care of all these things...
please suggest something asap..
helpful ans will be rewarded..
thanks,
jigs.

Dear Jigs,
Please go though the following lines of code:
D A T A D E C L A R A T I O N *
TABLES: ANEP,
BKPF.
TYPES: BEGIN OF TY_TABDATA,
MANDT LIKE SY-MANDT, " Client
ZSLNUM LIKE ZSHIFTDEPN-ZSLNUM, " Serial Number
ZASSET LIKE ZSHIFTDEPN-ZASSET, " Original asset that was transferred
ZYEAR LIKE ZSHIFTDEPN-ZYEAR, " Fiscal Year
ZPERIOD LIKE ZSHIFTDEPN-ZPERIOD, " Fiscal Period
ZSHIFT1 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 1
ZSHIFT2 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 2
ZSHIFT3 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 3
END OF TY_TABDATA.
Declaration of the Internal Table with Header Line comprising of the uploaded data.
DATA: BEGIN OF IT_FILE_UPLOAD OCCURS 0.
INCLUDE STRUCTURE ALSMEX_TABLINE. " Rows for Table with Excel Data
DATA: END OF IT_FILE_UPLOAD.
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME,
BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK B2,
END OF BLOCK B1.
E V E N T : AT S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = '.'
CHANGING
FILE_NAME = P_FNAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Upload Excel file into Internal Table.
PERFORM UPLOAD_EXCEL_FILE.
Organize the uploaded data into another Internal Table.
PERFORM ORGANIZE_UPLOADED_DATA.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
*& Form UPLOAD_EXCEL_FILE
text
--> p1 text
<-- p2 text
FORM UPLOAD_EXCEL_FILE .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FNAME
I_BEGIN_COL = 1
I_BEGIN_ROW = 3
I_END_COL = 7
I_END_ROW = 32000
TABLES
INTERN = IT_FILE_UPLOAD
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " UPLOAD_EXCEL_FILE
*& Form ORGANIZE_UPLOADED_DATA
text
--> p1 text
<-- p2 text
FORM ORGANIZE_UPLOADED_DATA .
SORT IT_FILE_UPLOAD BY ROW
COL.
LOOP AT IT_FILE_UPLOAD.
CASE IT_FILE_UPLOAD-COL.
WHEN 1.
WA_TABDATA-ZSLNUM = IT_FILE_UPLOAD-VALUE.
WHEN 2.
WA_TABDATA-ZASSET = IT_FILE_UPLOAD-VALUE.
WHEN 3.
WA_TABDATA-ZYEAR = IT_FILE_UPLOAD-VALUE.
WHEN 4.
WA_TABDATA-ZPERIOD = IT_FILE_UPLOAD-VALUE.
WHEN 5.
WA_TABDATA-ZSHIFT1 = IT_FILE_UPLOAD-VALUE.
WHEN 6.
WA_TABDATA-ZSHIFT2 = IT_FILE_UPLOAD-VALUE.
WHEN 7.
WA_TABDATA-ZSHIFT3 = IT_FILE_UPLOAD-VALUE.
ENDCASE.
AT END OF ROW.
WA_TABDATA-MANDT = SY-MANDT.
APPEND WA_TABDATA TO IT_TABDATA.
CLEAR: WA_TABDATA.
ENDAT.
ENDLOOP.
ENDFORM. " ORGANIZE_UPLOADED_DATA
In the subroutine --> ORGANIZE_UPLOADED_DATA, data are organized as per the structure declared above.
Regards,
Abir
Don't forget to award points *

What is the problem with native dynamic sql when counting rows in all table

what is the problem with native dynamic sql when counting rows in all table?Giving an error "table or view does not exist". Thanks.
DECLARE
v_sql_string varchar2(1000);
v_no_of_rows number;
BEGIN
for i in ( select table_name from all_tables )
loop
v_sql_string := ' select count(1) from ' || i.table_name;
dbms_output.put_line( v_sql_string );
--execute immediate v_sql_string into v_no_of_rows;
end loop;
END;

Usually your problem can be described with 'Who cares'. I mean, for what reason do you do this? I doubt that there's a business need to get 100 % accurate answers for this. Normally such things are used to get a picture about the growth of data.
Personally I would prefer to have up-to-date statistics for all tables and just query the number of rows from there. Sufficient for me in < 99 % of all cases.
Just my $ .02...

SQL Developer 2.1 EA - count rows with filter on a table

This is a small problem that I came across today while using 2.1 EA. I opened a table and did a filter to narrow down the results of the table. Then when I right clicked on the search results and clicked on 'Count Rows'....I get the count of the rows in the table and not my search results.
Is this a feature or a bug?
Thanks,
Mike

In EA2, we get both the total and the filtered total, nice.
Only remark is we don't get a progress indicator anymore, and thus can't cancel a query that might take up hours to finish!
Please log a bug for this.
Thanks,
K.

Counting rows for db tables with 500 million+ entries

Hi
SE16 transaction timesout in foreground when showing number of entries for db tables with 500million+ entries. In background this takes too long.
I am writing a custom report to get number of records of a table and using OPEN CURSOR concept to determine number of records.
Is there any other efficient way to read number of records from such huge tables.
        OPEN CURSOR l_cursor FOR
        SELECT COUNT(*)
           FROM (u_str_param-p_tabn) WHERE (l_tab_cond). " u_str_param-p_tabn is the table name in input and l_tab_cond is a
          DO.                                                                              " dynamic where condition
            FETCH NEXT CURSOR l_cursor INTO l_new_count.
           PACKAGE SIZE p_pack.
            IF sy-subrc NE 0.
              EXIT.
            ELSE.
              l_tot_cnt = l_tot_cnt + l_new_count. " l_tot_cnt will contain number of records at end of loops
              CLEAR l_new_count.
            ENDIF.
          ENDDO.
          CLOSE CURSOR l_cursor.

Hello,
For sure it is a huge number of entries!!!
Is any key-fields?
Use a variable to keep a counter of the key-fields , for example row_table and also a low and high variable .
Try to use a do-loop and in this loop use:
do .
low_row = row_table.
low_high = row_table + 200.000.:increse the select every 200.000 entries
Do "select statement into table" based on the key-fields
For example : if the key-field is the docnr,
Do a "select into table itab where docnr >low_row
                                        and docnr < low_high"
Count the lines of itab and keep them in a variable.
free the itab.
enddo
Good luck.
Antonis

Query to return ALL rows even those with zero counts

Hi,
The following query will return only those rows that have a non zero count value:
select c.id, a.name, count(*) as XYZ from CON c, CUST a
where c.help !='1' and (c.id = a.id) group by c.id, a.name order by c.id;
The results are:
1 ME 3
3 YOU 4
What i want is to return all rows in CUST and the count, XYZ, that correspond to each row in CUST that matches the whare condition above, even if the count is zero.
ie
1 ME 3
2 WE 0
3 YOU 4
Can this be done?

You may want to get the counts then do the outer join. If you simply count with an outer join you will get 1 for 'WE' because there is a row in the cust table with 'WE'. This may work for you;
with
cust as (
   select 1 id, 'ME' name from dual union all
   select 2 id, 'YOU' name from dual union all
   select 3 id, 'WE' name from dual),
con as (
   select 1 id, '2' help from dual union all
   select 1 id, '2' help from dual union all
   select 1 id, '2' help from dual union all
   select 2 id, '2' help from dual union all
   select 2 id, '2' help from dual union all
   select 2 id, '2' help from dual union all
   select 2 id, '2' help from dual)
-- end of test data
select a.id, a.name, nvl(c.cnt,0) xyz
from cust a,
   (select id, help, count(*) cnt
   from con
   where help !='1'
   group by id, help) c
where a.id = c.id(+)

Issue in retrieving all the records from ADF Table with multiple row

Hi,
As per my requirement, I need to fill the table with multi selected LOV values and when user clicks on commit, I need to save them to database.
I am using ADF 11g, Multi select table. Using the below ADD method, I am able to add the records but if user clicks on cancel, I need to remove those from view and clear the table as well.
But the Issue I am facing is, in my cancel method, always I am getting half of the records. Lets assume table contains 100 records but in my cancel method, I am getting only 50 records.
Please let me know what is the issue in my source code.
ADD Method:
public void insertRecInCMProcessParamVal(String commType, String processType, Number seqNumber){
try{
Row row = this.getCmProcessParamValueView1().createRow();
row.setAttribute("ParamValue7", commType);
row.setAttribute("ProcessType", processType);
row.setAttribute("CreationDate", new Date());
row.setAttribute("CreatedBy", uid);
row.setAttribute("ParamValueSeqNum", seqNumber);
row.setAttribute("ProcessedFlag", "N");
this.getCmProcessParamValueView1().insertRow(row);
}catch(Exception e){
e.printStackTrace();
Table Code:
<af:table value="#{bindings.CmProcessParamValueView11.collectionModel}"
var="row"
rows="#{bindings.CmProcessParamValueView11.rangeSize}"
emptyText="#{bindings.CmProcessParamValueView11.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CmProcessParamValueView11.rangeSize}"
rowBandingInterval="1"
selectedRowKeys="#{bindings.CmProcessParamValueView11.collectionModel.selectedRow}"
selectionListener="#{bindings.CmProcessParamValueView11.collectionModel.makeCurrent}"
rowSelection="multiple"
binding="#{backingBeanScope.backing_app_RunCalcPage.t1}"
id="t1" width="100%" inlineStyle="height:100px;" >
<af:column sortProperty="ParamValue6"
sortable="true"
headerText="#{bindings.CmProcessParamValueView11.hints.ParamValue6.label}"
id="c1" visible="false">
<af:inputText value="#{row.bindings.ParamValue6.inputValue}"
label="#{bindings.CmProcessParamValueView11.hints.ParamValue6.label}"
required="#{bindings.CmProcessParamValueView11.hints.ParamValue6.mandatory}"
columns="#{bindings.CmProcessParamValueView11.hints.ParamValue6.displayWidth}"
maximumLength="#{bindings.CmProcessParamValueView11.hints.ParamValue6.precision}"
shortDesc="#{bindings.CmProcessParamValueView11.hints.ParamValue6.tooltip}"
id="it3">
<f:validator binding="#{row.bindings.ParamValue6.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="ParamValue7"
sortable="true"
headerText="Comm Type"
id="c2">
<af:inputText value="#{row.bindings.ParamValue7.inputValue}"
label="#{bindings.CmProcessParamValueView11.hints.ParamValue7.label}"
required="#{bindings.CmProcessParamValueView11.hints.ParamValue7.mandatory}"
columns="#{bindings.CmProcessParamValueView11.hints.ParamValue7.displayWidth}"
maximumLength="#{bindings.CmProcessParamValueView11.hints.ParamValue7.precision}"
shortDesc="#{bindings.CmProcessParamValueView11.hints.ParamValue7.tooltip}"
id="it4">
<f:validator binding="#{row.bindings.ParamValue7.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="ParamValue8"
sortable="true"
headerText="#{bindings.CmProcessParamValueView11.hints.ParamValue8.label}"
id="c3" visible="false">
<af:inputText value="#{row.bindings.ParamValue8.inputValue}"
label="#{bindings.CmProcessParamValueView11.hints.ParamValue8.label}"
required="#{bindings.CmProcessParamValueView11.hints.ParamValue8.mandatory}"
columns="#{bindings.CmProcessParamValueView11.hints.ParamValue8.displayWidth}"
maximumLength="#{bindings.CmProcessParamValueView11.hints.ParamValue8.precision}"
shortDesc="#{bindings.CmProcessParamValueView11.hints.ParamValue8.tooltip}"
id="it2">
<f:validator binding="#{row.bindings.ParamValue8.validator}"/>
</af:inputText>
</af:column>
</af:table>
Backing Bean Code:
DCBindingContainer dcBindings=(DCBindingContainer)getBindings();
DCIteratorBinding dcIterator=dcBindings.findIteratorBinding("CmProcessParamValueView1Iterator");
RowSetIterator rs = dcIterator.getRowSetIterator();
System.out.println("In Cancel Row Count is : "+ rs.getRowCount());
if (rs.getRowCount() > 0) {
Row row = rs.first();
row.refresh(Row.REFRESH_UNDO_CHANGES);
row.remove();
while (rs.hasNext()) {
int count = rs.getRowCount();
System.out.println("Count is : "+ count);
Row row = rs.next();
System.out.println("Row === "+ row);
if(row != null){
row.refresh(Row.REFRESH_UNDO_CHANGES);
row.remove();
Thanks.

Issue resolved.
remove selectionListener and selectedRowKeys....
code to get all the selectedRows.
RowSetIterator rs = dcIterator.getRowSetIterator();
RowKeySet rks = this.t1.getSelectedRowKeys();
Iterator rksIter = rks.iterator();
while (rksIter.hasNext()) {
List l = (List) rksIter.next();
Key key = (Key)l.get(0);
Row row = rs.getRow(key);
Thanks.

Counting rows on table with TEXTIMAGE_ON

Similar Messages

Maybe you are looking for