Cover Flow cache is gone every time I restart iTunes.

The title pretty much says it all. Ever since I began running iTunes on my new MacBook Pro (Spring 2009, 3.06 Ghz with 4GB of RAM) I was pretty disappointed with how slowly Cover Flow worked. I had been using iTunes on a PC for a while, but I figured that on brand new top-of-the-line Apple hardware, iTunes and Cover Flow would fly.
The problem is, every time I restart iTunes, it appears that any Cover Flow image cache is gone. It seems like it has to re-lookup and re-load every image in my library as I scroll. It is usually smart enough to predict where a long scroll if going to end and pre-load the images at my destination, but every cover that I "flow" over during the scroll appears as just the default musical note symbol. Plus, moving around is choppy as it loads every image. I have to manually scroll through the whole library in order to force it to load every single cover and therefore respond smoothly as I scroll through. This keeps working until I restart the app, and then I'm back to square one.
Why is this happening?

Thank you to all that gave advice, none of the suggestions worked I'm afraid........ but I did find a solution to the problem, by accident......... Doing a normal sync still does not work...... So what I have done is, limited each file to just 1000 photos, and have ended up with 32 files now........... I have ticked the boxes     "Sync photo's from, selected files" and I sync with the first file ticked, then sync again with the second ticked, and so on, I know its long winded but they are now all on my ipod

Similar Messages

  • Apple TV Completely Re-syncing Every Time I restart iTunes

    After the last patch to iTunes (via Software Update), every time that I stop and start iTunes it does a full wipe of the Apple TV's hard drive and a full re-sync. Which takes almost an hour since I have over 3,000 songs.
    Any ideas what might be causing this new "feature"? It's REALLY annoying!

    Hello levy69,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning installation issues:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify  this pro

    lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify  this problem. i can not find ircat ir data etc  in the programme files. Thanks

    robmac76 wrote:
    can you tell me step by step how to recify  this problem.
    Yes:
    Step 1: Delete the preview cache.
    That's it!
    So, the trick is to find the preview cache.
    This document gives location:
    http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
    To be clear: it's a folder in with your catalog and you want to delete the whole folder but nothing else.
    If your catalog file path is "X:\My Catalogs\My Catalog.lrcat", then the preview cache "folder" will be:
    X:\My Catalogs\My Catalog Previews.lrdata
    So the trick is to find your catalog file, and since Lr won't open your catalog and run, you can't use it to find out.
    But you should be able to find it by searching your disks for *.lrcat files - do you know how to do that?
    Which OS?
    If you know the name of the catalog it will help, but also: it's probably NOT in with your program files.
    UPDATE: The above-mentioned document gives default name and location for preview cache, so if you haven't overridden the default, it should be right where that document said it would be - is it? (of course you need to know your user name too, but presumably you do, no?).
    R

  • Have to reconnect to my network every time I restart

    Every time I restart my computer, it fails to find my network even though the airport is on and the network is listed. I have gone through the network diagnostics which appears to work, but when I restart, it still can't find my network on its own for some reason. What's going on?

    I think you have a corrupt .plist...
    Maybe "/Library/Preferences/SystemConfiguration/preferences.plist", or "/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist", (or whatever interface you're using, if not airport).
    Back them up before trashing them, then reboot.

  • How do I stop my toolbar buttons disappearing every time I restart Firefox?

    My toolbar buttons disappear every time I restart Firefox 4.0.1. They used to disappear only every week or so. Then I tried the recommended fix at "http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox" dealing with file places.sqlite. Now they disappear every time I start, which is several times a day due to RAM usage sometimes approaching 1GB after a few hours. I am on Win 7 and have customized with tabs on bottom and to display the menu bar and put my buttons at top to save space. This is driving me insane. I have to re-customize the toolbars every time I open the browser. I did not have this problem with Ff 3.6. I have tried the safe mode and checked add-ons 1 at a time. Nothing changes except now it's every time instead of every week or so. I cannot switch to Chrome full time because they don't have all the add-ons I need for work. Please help.

    If you lose the toolbar customization then you do not have a problem with places.sqlite, but with the file localstore.rdf in the [[Profiles|Profile folder]].
    * http://kb.mozillazine.org/Corrupt_localstore.rdf
    Use the Google cache in case of problems accessing the MozillaZine KB (prefix links with cache:):
    *http://www.google.com/search?hl=en&ie=UTF-8&q=cache:http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Must reseat My x-fi express card every time I restart my computer

    AMust reseat My x-fi express card every time I restart my computerW I am forced to reseat my x-fi express notebook card every time I turn my computer on in order for it to work which is very frustrating since I do a lot of video recording by Firewire and need the card to work reliably. Once i reseat it into the express slot, it works fine, but not before then.
    I have a Dell XPS M730 running XP sp3.
    It is apparently a driver problem because if I forget to reseat during bootup, both Sony Sound Forge and Adobe Premiere Pro .5 freeze up when I try to load them at they are scanning for audio devices.
    So far I've tried:
    1) disabling the on-board sound card hoping to eliminate a possbile confilct.
    2. Downloading the latest drivers, etc.
    Does anyone have an idea of how to solve the problem?
    Thanks

    1. If you log in automatically, a bug in some versions of OS X will cause the desktop picture to revert to the default image at every startup. The only known workaround is to disable automatic login in the Users & Groups preference pane.
    2. If the selected Desktop picture is stored in an iPhoto library on an external drive, export it from iPhoto and move it to a folder on the startup volume. (Credit for this solution to ASC member janay.)
    3. If the desktop picture always reverts to a plain blue background, one of your login items may be causing the problem. The "TeamViewer" application can have this effect; see this thread. If it's not that in your case, rule out all other third-party login items as possible causes.
    4. If you have a MacBook Pro with automatic graphics switching, disable it temporarily in the Energy Saver preference pane, set the Desktop picture, then restart the computer and re-enable graphics switching.
    5. If none of the above applies to you, proceed as follows.
    Back up all data.
    In the Finder, hold down the option key and select
              Go ▹ Library
    from the menu bar. From the Library folder, delete the following item, if it exists:
              Caches/com.apple.systempreferences
    and move the following items to the Desktop, if they exist:
              Application Support/Dock/desktoppicture.db
              Preferences/com.apple.desktop.plist
    Launch System Preferences and test. If you still have the issue, put the items you moved to the Desktop back where they came from and post again. Otherwise, delete the items.

  • Is there a why to stop the box that pops up demanding a password to enable automatic downloads every time I open iTunes?

    Everytime I open itunes a box prompts me to enter a password to enable automatic downloads so I hit 'cancel' and it goes away, then it comes bck soon after. Is there a way of disabling this? It's as bad as getting pop up ads, only it's coming from Apple. VERY annoying.

    I have experienced the same problem. Here's what worked for me.
    I did all three so I cannot say for sure which step was the successful one.
    (1) iTunes > Preferences > Store. Uncheck everything that has to do with Automatic Downloads. (From now on if I want to check on the status of any downloads I will do it manually. No big deal. That beats having to enter my password every time I launch iTunes.)
    (2) iTunes > Store menu. Select Authorize This Computer. The response is that it is already authorized. The thinking here is that it resets the authorization.
    (3) iTunes > Store menu. Turn off Genius. (Bummer, because I kind of like Genius. Oh well.)
    (4) iTunes > Preferences > Advanced. Click Reset Warnings and Reset Cache. (Again, clean house to see if that helps.)
    So far this has worked. No more constant requests for my iTunes password upon launching iTunes.

  • Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

    Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • 'iTunes Software Licence Agreement' every time I open iTunes

    Since the most recent iTunes update, I'm getting the 'iTunes Software Licence Agreement' window every time I open iTunes (screenshot - http://img508.imageshack.us/img508/5265/68707078.png) -- to which I have to select 'agree' to access normally.
    Why? And anyway to stop this?
    Thanks in advance.

    *Replying to Gareth L*
    Though on my own account, its still comming up with the "set up" screens before it starts.. any other ideas i could try?
    iTunes setup assistant runs every time you launch, user-account-specific issue ... I think your other set of iTunes preference files (in your normal user account) might be damaged, Gareth. (Have experimented with this on my XP PC ... rebuild one set and the license agreement runs, rebuild the other set and the iTunes Setup assistant runs. So damage to the 'other" set might be causing your relentless-setup-assistant thing.)
    So, we'll try swapping out your other set of pref files. Here's Windows 7 instructions. Make a note of any custom preferences you have set up, because this procedure will return everything to default that wasn't returned to default by rebuilding the other set. You might also have to reinstall any third-party iTunes add-ons/plug-ins after doing this one, too.
    Here's Windows 7 instructions for rebuilding "the other set" *(Step 10* contains the crucial difference from the license-agreement-problem instructions).
    First, quit iTunes if you have it open.
    Next, you'll need to make sure you are set up to view hidden files and folders in Vista (or 7).
    1. From the Start menu, click Open.
    2. In the Organize menu, click Folder and Search Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
    5. Click OK.
    Next, you'll remove the iTunes preference folder (and contained file).
    6. In Computer, open Local Disk: C or whichever drive your documents are stored on.
    7. Open the Users folder.
    8. Open the folder with the name of the Vista (or 7) user account in which iTunes always shows the setup assistant in when launching.
    9. Open the AppData folder.
    10. Open the Roaming folder.
    11. Open the Apple Computer folder.
    12. Drag the iTunes folder out onto the Desktop.
    Now you'll rebuild the preference folder and file.
    13. Launch iTunes. This will cause iTunes to rebuild that preference folder and file. *The setup assistant will appear for you again.* (That is expected behavior when that particular preference folder and contained file are being rebuilt.)
    14. Now quit iTunes and launch iTunes again. If the preference folder and contained file have been successfully rebuilt, the setup assistant should not appear this time.
    ... any luck with that?

  • Every time I open iTunes I have to agree to the licence . . . . and MORE!

    Windows 7 64 bit  /  iTunes 11.0.4.4
    Every time I open iTunes, I have to perform the following repetitive steps;
    -Accept the license agreement
    -Click Agree on the Welcome Screen
    -Decline the default player offer even though I have checked the "do not show" box
    -Select "Show Menu Bar"
    -Select "Show Side Bar"
    This is getting real tiresome. Help in resolving this issue appreciated - IM

    I found the solution and copy/pasted the stept to take. I got it from another subject related to the problem on this thread and it works for me.
    Burwood (Christchurch), New Zealand
    Re: 'iTunes Software Licence Agreement' every time I open iTunes 
    Feb 12, 2010 6:11 PM (in response to EVVE)
    yep, let's investigate the preference files possibility. First, quit iTunes and log back into your usual user account. Next, we'll have to set your PC up to view hidden files and folders. From the Start menu, click Open.
    In the Organize menu, click Folder and Search Options.
    Click the View tab.
    In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
    Click OK. Now, in Computer, open "Local Disk C:".
    Open the "Users" folder.
    Open the folder with the name of your usual user account.
    Open the "AppData" folder.
    Open the "Local" folder.
    Open the "Apple Computer" folder. Drag the "iTunes" folder you see in there out onto the Desktop. Now launch iTunes. (This will cause iTunes to rebuild that set of preference files.) *The license agreement will appear for you again.* (That is expected behavior when that particular set of preference files is being rebuilt.)
    Cheers all

  • I have not been able to use iTunes for several months.  Every time I open iTunes, it freezes by computer such that there is about a minutes between each action.  I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.

    I have not been able to use iTunes for several months.  Every time I open iTunes, it freezes by computer such that there is about a minutes between each action.  I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.  Help!  I can't access my iTunes content.

    I have not been able to use iTunes for several months.  Every time I open iTunes, it freezes by computer such that there is about a minutes between each action.  I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.  Help!  I can't access my iTunes content.

  • I have a windows 7 64x SP1 and every time I install iTunes 12 I get this message when I try to ponen it:"This copy of Itunes is damaged and it has not been correctly installe. Please, install iTunes again.(-42404)". The instalation process runs smoot

    I have a windows 7 64x SP1.
    Every time I install iTunes 12 I get this message when I try to open it:"This copy of iTunes is damaged and it has not been correctly installed. Please, install iTunes again.(-42404)".
    The instalation process runs smoothly without any error message and iTunes has been installed in my computer before. The problem started with the update no. 12. Any idea what's going on? Thank you

    if itunes will not run, you probably have mangled windows badly
    one feature of windows 8 is the refresh that saves libraries,
    because you are using windows 7, you will need to backup all files to another storage device

  • Apple:  Give me a way to stop TV downloads on iTunes, or I stop buying shows on my AppleTV.  That simple.   I'm tired of automatic downloads filling my hard drive every time I open iTunes on my laptop.

    I'm tired of automatic downloads filling my hard drive every time I open iTunes on my laptop.  Tonight I had to go to iTunes to verify my payment info - even though I'd already done that two days ago - and before I can even access the iTunes Store, iTunes starts downloading 44 TV shows that I've purchased over the last few months on my AppleTV; before I could completely stop it, it had entirely filled up my hard drive - 180 GB.  There's NO reason there isn't a way to stop auto-downloads of TV shows - every other type of media has the ability to stop auto-downloads, and given that I have an AppleTV (for now!), why in pasta's name would I want to load them onto my laptop?!

    We are all itunes users just like you.
    You can leave feedback for Apple at:  http://www.apple.com/feedback

  • HT204406 Does iTunes match have to look for all music on my computer and send that data to and from Apple every time I open iTunes? This frequently makes iTunes crash before I even get to listen to one song. Installing the latest version of iTunes does no

    Does iTunes have to check all my music for match every time I open iTunes even when nothing has changed in the music folder?  This is just one problem I have with iTunes and match.  Every time I open iTunes, the first thing happening is iTunes checking my music and sending the information to Apple and then waiting for Apple to send back information about match. There is a third step that I have never seen iTunes actually reach as it always crashes before finishing this ritual with my music and match.  Since I paid for match I can no longer use iTunes to listen to any of my music. I like having match function on my iPhone because even 128 GB is not enough space to keep a music library and everything else needed on the iPhone.  But it's been a disaster with iTunes on my Windows 7 PC. I updated iTunes recently and the same problem continues.  I can't find any clear description of how match works but it seems if there has been no change to the music folder then the tedious and buggy process of checking all music for match and sending data back and forth to Apple every time iTunes is used should not be necessary.  Is there possibly something I have to change settings for to help iTunes start without so much to do?

    If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • HT1349 I don't have an Apple product. I accidentally signed up for iCloud because I thought I could use it with my iTunes on my PC. Now it won't go away. I have deleted the software but every time I open iTunes it demands I reopen my iCloud session. Help.

    I want to get rid of iCloud. I do not currently have an Apple product but thought I could use it with iTunes and my PC. I have deleted the software. I told iTunes to take it off my account, but every time I open iTunes there it is again, asking me to log into iCloud. I can't get Apple support because I don't have an Apple product. I don't know how to get rid of this!

    This is for a Mac, but may be similar for a PC.
    How-to: Safely delete an iCloud account from your Mac or iOS device
    http://9to5mac.com/2013/07/13/how-to-safely-delete-an-icloud-account-from-your-m ac-or-ios-device/
     Cheers, Tom

Maybe you are looking for

  • New Value Fields in COPA

    hi All COPA configuration with characteristics and value fields is already transported to QAS. I have created three new Value fileds in DEV and want to transport in QAS?

  • New external drive:  Copy existing masters onto it?

    This is a hard drive setup question. Current setup: 2013 iMac27 with SSD. Aperture on internal.  All masters are referenced on an external 1TB USB2 drive. Backup 1 is on a 3TB external using Time Machine Backup 2 is on CrashPlan cloud This has been w

  • Sync iPhone 4S - Moving from XP to Windows 7 or 8

    I'm currently running iTunes on an old and decrepit tower desktop running Windows XP, syncing both my iPod (80gb Gen 5 Classic I think) and iPhone on it. I also have a newer laptop running Windows 7 Home Premium, with iTunes installed and kept up to

  • Dock not showing in auto hide

    Hi, My dock is set to auto-hide, and I am using spaces. however my dock does not always show when in put my cursor at the bottom, I have to swap to and from another space to get the dock to show or unhide. My hot corners are also not working. any sug

  • PO item catagory K

    Hi, i have created frame work order po with item catagory K, If we enter material in po it takes G/L account automatically, my question is how this material is related to G/L Account ? please explain . Regards Prashanth