CPU, Memory, Disk Capacity Monitoring

Well I managed to get memory size of a pc (where my agent is located) using JNI and I don't think it's gonna be hard to get the other information (hopefully). However the memory size that I collect is only for one pc. What if I want to get the memory size of all pc's within a network.
Is it possible to request those pc's information without installing agent in each pc ? or Is there any better way of doing it ?
Does RMI require us to use 2 different applications or not ? Maybe I can use it
I don't mind in using C or C++ if neccessary, as long as I don't have to install my applications in all pc's. Thanks.
Regards,
Mustofa
Edited by: abiieez on Jan 7, 2008 10:35 PM

Is it possible to request those pc's information without installing agent in each pc ? or Is there any better way of doing it ?No. Wouldn't you consider it a security threat if it was possible?
Does RMI require us to use 2 different applications or not ? Maybe I can use itI don't see in what way RMI is related to the problem. One application can be configured to act as either server or client, but it still needs to be on both machines.
>
I don't mind in using C or C++ if neccessary, as long as I don't have to install my applications in all pc's. Thanks.You have to. (Or at least install something else on those machines)
Kaj

Similar Messages

Cpu, memory etc requirements for 10gAS

I intend to install 10gAS (BI + forms) because I want to implement discoverer 10g with E-business. My question is
(1) where can I get a document on the cpu, memory, disk space etc requirement for installing AS 10.2.1.0.2 on for example RHEL 5.0.
(2) My E-Business suite is on solaris.....but I want to put the 10gAS Discoverer 10g on RHEL. Do you see any problem?
Thanks
Edited by: user547023 on Sep 16, 2008 6:52 AM

http://download.oracle.com/docs/cd/B14099_19/getstart.htm
The link above is exaclty what I was hoping for. The books therein detail all the requirements for all operating system. I am just posting this for the benefit of people that may need it later on.

Monitoring of CPU Memory backplane for SG-300

Hi,
How to monitor of CPU Memory Baclplane for SG300-28 (SRW2024-K9-EU)..?
Thanks for your Input,,,,

See this link for the list of supported MIBS:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids12/cliguide/clisnmp.htm#wp1042408

Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

Prime Infrastructure/ Assurance is positioned today more towards managing network elements and network performance, rather than server infrastructure. We are in the process of adding Datacenter component support, with more focus on Nexus and UCS- due later this year.
Having said that, Prime Infrastructure allows the system user to add custom SNMP polling templates, which can then be used for polling any SNMP based values from any SNMP enabled device. These can be used to collect the information you specified below and the polled information will be available in dashboards and reports.

Monitor CPU, hard disk with Netmanager 1.1

Hi,
How can I monitor CPU, hard disk and interface with netmager 1.1 when I have servers with windows server 2003 or 2008 ?
regards

Did you initialize the disk yet? Go to Control Panel, Administrative Tools, Computer Management, and then click on Disk Management. You should now see the disk listed there. Right-click the disk and initialize it. You can get to disk management directly by hitting the WindowsKey+R, type diskmgmt.msc, hit okay or enter, and the disk management box below will show.

Newbie having problems with noisy fan and high CPU usage in Activity Monitor

I am new to the world of Apple and have got my hands on a hand-me-down PowerBook G4 version 10.4.11. It works fairly well for everything but the Internet.
One of the first symptoms i noticed was that watching stuff on youtube was slow and jumped a lot. I checked a few things out and looked the CPU usage in activity monitor and this was about 80% to 100% when on youtube or even moving from page to page. I'e tried loads of stuff including repairing disk permissions, emptying caches and relaunching finder when the preferences file is on the desktop (not really sure what that was supposed to do).
The next thing I discovered was that if i disconnected the laptop from the mains and played youtube and some other applications the whole thing would go into sleep mode very quickly. I have got temperature monitor downloaded now although I already know it is getting very hot.
PS when it heats up the fan turns on because I can hear a whirring sound...
Would really appreciate some insight into this as it seems to be a good runner otherwise.
PS2 I have loads of free space left in the disk usage tab in activity monitor.
Big thank you in advance

Welcome to the world of PowerBook!
One of the first symptoms i noticed was that watching stuff on youtube was slow and jumped a lot. I checked a few things out and looked the CPU usage in activity monitor and this was about 80% to 100% when on youtube
Virtually no G4s are dealing well with web video anymore. The video technology used by modern developers puts a huge strain on a G4 processor. As this a choice made by coders, there is not much you can do about it. Some people suggest adding RAM but the effect is marginal considering it's the processor that's taxed.
Notebooks get hot. The fans in my 1Ghz 17-inch PowerBook from 2003 kick in between 130 and 140°F. The danger point is not until in the vicinity of 100F so don't sweat it to much. Make sure you do not cover the case bottom by setting the computer on a thick cloth placemat, pillow or other bedding item, or on your lap without a lapboard. The bootom of the case is part of the heat dissipation system and needs air under it to work
A lot of PowerBooks have, by now, lost some or all of their "feet" that gve a little space under the case. Don't bother looking for official replacements--get the silicone door/drawer bumpers from the hardware store that stick on. I found some about 3/16" thick that let more air under my PB thatn the mostly missing originals.
The next thing I discovered was that if i disconnected the laptop from the mains and played youtube and some other applications the whole thing would go into sleep mode very quickly
Your battery is likely dead from old age. Batteries only last about 2-3 years. You are seeing a sign of the battery lacking sufficient remaining capacity to run the computer. Get this utility:
http://www.coconut-flavour.com/coconutbattery/
(you'll need the 2.6.6 version for Tiger) and post what is says about "Health" and "Cycles."

ISE dashboard - CPU, memory - data not available for PSN

Hi All,
Has anyone seen the ISE dashboard not showing stats for CPU memory for PSN's ? Admin node cpu and memory displays ok.
How is this data shared between the nodes ?
I did have some firewall issues between admin and PSN but this is now solved. I did note the same issue even when nodes were on same L2 network.

Confirmed this issue was caused by syslog dropped by firewall. Symptoms included dashboard wasn't updating for that node, and also no auth logs getting back to monitoring node.
ASA was permitting UDP 514 (syslog) but not UDP 20514.
I'm a bit confused on UDP 30514. In the guide it also says 30514 is syslog in one spot, and radius in another.

Create Notification for Cluster Share Volume Disk Capacity

I am new to System Center Operations Manager but am slowly learning. We are running SCOM 2012 R2 and I want to get notifications when there are issues in our 2012 Hyper-V Cluster, specifically when the free space on our CSVs gets below
100 GBs. I have a notification channel setup and I am receiving notifications on other issues on monitored servers as they occur. I have imported the Cluster, Core OS and Windows Server OS management packs which have enabled me to see in Monitoring
> Microsoft Windows Server > Performance > Cluster Share Volume Disk Capacity the Free Space for the CSVs in a graph, now what do I need to do so I can get a notification when the free space on our CSVs gets below 100 GBs or whatever other
level I want to set it at? Thanks.

Hi WSUAL2,
Have you created a separate Subscription for Disk alerts? Please refer below link for "How to configure notifications".
http://blogs.technet.com/b/kevinholman/archive/2012/04/28/opsmgr-2012-configure-notifications.aspx
In your case, you need to select the respective Cluster Disk monitor while creating new Subscription.
Check mark this --> "Created by specific Rule or Monitor"
Before that make sure that you are getting alert in console. By seeing Alert Details, you can find the correct Rule/Monitor name.
Regards, Suresh

Which is the Apple TV 2nd flash disk capacity ?

which is the Apple TV (2nd series) flash disk capacity ?
Thanks

Also of note it doesn't actually store anything indefinitely.
Say you rent an iTunes HD movie that might be 3-6GB or even more, it will buffer what is needed to the memory allowing seamless playback once enough has buffered (almost instant if you have >8Mbps). However say you decide to watch later and watch some trailers, youTube, Netflix etc then the pre-buffered content will usually get overwritten and if on a slow connection it may take many mins or even hours to pre-buffer again to watch.
Nothing is really synced to it though some photos can be synced, but again I suspect some may be purged if memory demands are high.

Cisco ISE CPU/Memory Upgrade

Hello Everyone,
I have a Cisco ISE in Vmware environment and i need upgrade the cpu/memory in my Policy Service Node.
How i can perform this? Its only increase the memory/cpu in vmware machine environment?
Tks.

Rafael,
That would be what I would strongly recommend since it is not documented on what the best practices are from Cisco and with ISE database being sensitve to how the hard disk are presented, I would strong suggest starting fresh in order to rule out any stablity related issues (if you face them) in the future.
Thanks,
Tarik Admani
*Please rate helpful posts*

Historical CPU/Memory utilization data and xm top interpretation

Hi All,
Can we get historical CPU/Memory utilization data on domU server. xm top command give real-time data.
secondly, how to interpret xm top command output.
xentop - 02:28:25 Xen 3.0-unstable
3 domains: 3 running, 0 blocked, 0 paused, 0 crashed, 0 dying, 0 shutdown
Mem: 16772032k total, 13863520k used, 2908512k free CPUs: 4 @ 2327MHz
NAME STATE CPU(sec) CPU(%) MEM(k) MEM(%) MAXMEM(k) MAXMEM(%) VCPUS NETS NETTX(k) NETRX(k) VBDS VBD_OO VBD_RD VBD_WR SSID
domain1 -----r 18153551 98.7 6299520 37.6 6307840 37.6 2 2 14008639723 134647867139 2 0 7405453 7224743 0
domain2 -----r 13574751 31.2 6299520 37.6 6307840 37.6 2 2 815959711 780254006 2 0 2732 2658 0
Domain-0 -----r 3807938 9.6 819200 4.9 no limit n/a 4 8 0 0 0 0 0 0 0
Does it implies that there are 2 virtual CPUs configured for guest(domain1), which at this moment 98.7% utilized. Doesn't it shows there is capacity problem?
In virtualization, are virtual CPUs dedicated to guests, or CPU cycles are available on demand. If this is the case, then one guest high utilization can slow down other guests as well.
Thanks,
Neeraj

Hi All,
Can we get historical CPU/Memory utilization data on domU server. xm top command give real-time data.
secondly, how to interpret xm top command output.
xentop - 02:28:25 Xen 3.0-unstable
3 domains: 3 running, 0 blocked, 0 paused, 0 crashed, 0 dying, 0 shutdown
Mem: 16772032k total, 13863520k used, 2908512k free CPUs: 4 @ 2327MHz
NAME STATE CPU(sec) CPU(%) MEM(k) MEM(%) MAXMEM(k) MAXMEM(%) VCPUS NETS NETTX(k) NETRX(k) VBDS VBD_OO VBD_RD VBD_WR SSID
domain1 -----r 18153551 98.7 6299520 37.6 6307840 37.6 2 2 14008639723 134647867139 2 0 7405453 7224743 0
domain2 -----r 13574751 31.2 6299520 37.6 6307840 37.6 2 2 815959711 780254006 2 0 2732 2658 0
Domain-0 -----r 3807938 9.6 819200 4.9 no limit n/a 4 8 0 0 0 0 0 0 0
Does it implies that there are 2 virtual CPUs configured for guest(domain1), which at this moment 98.7% utilized. Doesn't it shows there is capacity problem?
In virtualization, are virtual CPUs dedicated to guests, or CPU cycles are available on demand. If this is the case, then one guest high utilization can slow down other guests as well.
Thanks,
Neeraj

Ipad disk capacity/space decrease

After I update my ipad from 4.3.5 to 5.0, my disk capacity (total disk space) has decreased 1GB in total. anyone have solution to this??

Same boat. I was part of the beta, running it on AppleTV, iPad2, and five or six iPhone 4's. Bluetooth stack is the devil. AppleCare is your friend.
A read-only partition IOS was unable to over-write/delete at the time of the upgrade appears to be one on the list of things that could of happened. There have been a lot of CSS injection attacks, and the PDF exploit earlier on in the lower versions. There's some other stuff, but over all it's pretty secure. I found out about both those problems months before Apple released notice about them/started working on the patch - Somewhere around 4.2.6 - 4.2.8, Verizon thought I was a liar and I had to pay for 200 bucks worth of data charges, and I'm still fighting with iTunes over about 120 in charges. (Ever notice how when you type a password the last letter shows for a few seconds? They either had a VPN and were watching, or read it from device memory via keyhash or an insecure plaintext file saved with my password)
Anyways:
Look in your diagnostic logs under Settings, General, About, Diagnostics & Usage, and then Diagnostic Usage Data.
You might see a lot of logs listed with awdd_, or LatestCrash, or a bunch of other .plist related logs. See if you see anything in there that does not look normal. A lot of kernel panics/crashes is a good indicator of a bigger problem. You can also see in some of the logs a list of different libraries that were loaded, being used, threads, etc.
I honestly haven't come across a device yet that wasn't either A) Jailbroken or "Rooted" (without users knowledge, then they sandbox and/or use a library (libphide I believe it was) that hides/restricts everything from you. Turning on debugging in safari can show you when css attacks are attempted. Leaving java, cookies, bluetooth, and wifi off can help, but if someone wants in, well.. It's far from impossible.
B): MobileMe/iCloud replication is/was corrupt. I've had it replicating my push replications, downloading the same thing over and over then sending it back to the server again, eating up the "Other" Catagory (Documents and Data option in iCloud). Turning everything off to iCloud except find my iPad, deleting everything from the iPad by hand first (sounds silly, but you'd be surprised). then going to www.icloud.com, do a remote wipe, then do a manual recovery from iTunes and try reinstalling.
If that doesn't help to be honest you'll need to bring it to the AppleStore.
If want to take a screen shot of your log list of any of the ones showing crashes (probably will be several since it's rather long) i'll be glad to let you know if anything looks out of line. I've unfortunately got too much experience with problem children.
Good luck if I don't hear from you, my 64gb is showing 58.1 total capacity with 57.8 available on a "setup as new device" with no iCloud association as of yet.
I've replicated the problem manually on purpose on another device, and the "Read only" partition is/can cause this problem.

CPU memory increasing

Hi Every one,
we got an typical problem in our production Publisher instances(CQ 5.5) where CPU memory is getting increased to 60% in particular window 2 times a day. when we gone through log files we found that there are lot of index files, bundles version files, tar files getting generated. the path where it is getting generated is shown below
crx-quickstart\repository\workspaces\crx.default\index \...
crx-quickstart\launchpad\felix\ .....
crx-quickstart/repository/tarJournal/..
we googled and found apache Lucane indexing files will be stored under index folder (point 1 above),
Apache Felix Framework Bundle Cache is stored under launchpad\felix (point 2) AND Tar Persistance Manager is responsible for tar files generation.
what we dont understand is when CQ initiates this processes to run i.e., start indexing, start taking Bundle Cache, run tar persistance manager. Also we want to understand is there any link between all the three like on tar optimization running others like indexing and Bundle cache will be effected?
please let me know your response.

Hi Jorg,
We have a problem somewhat related to the above mentioned. We expect that our problem is around indexs and way CQ5.4 use indexes to refer to data from repository.
1) Does CQ allow reading different branches of a tree parallely?
2) Our application read different branches of tree using multiple threads (102) and we observe that it takes 30% more time when compared to reading whole tree using a single thread.
3) When we profile application it indicates that our threads run mutually exclusive. Memory (heap) usage is around 40% of total memory & CPU utilization is around 17% on an average basis and it oscillates between (10-40%) and never exceeds 40%. From application perspective we just kick off all threads using executor service and continue processing as each thread returns.
4) We will run this application somewhere between 15 & 20 times a day. Our observation is that 1st run of the day takes 50% more time when compared to subsequent runs. And it happens very consistently. We simulate this by re-starting the whole CQ application.
5) Now the problem gets more interesting, we changed settings in repository.xml to keep index in memory. For this we need to re-start our application twice. Once without index in memory (midnight) so that all index merging completes and then in the morning (8am) we will re-start our application with index in memory. Our whole CQ application will take 30 minutes to start without index in memory & it takes 7mintues to start with index in memory. But when we run our application takes almost double the amount of time(4.5hrs) to complete with index in memory when compared to 2.5hrs without index in memory.
Note :- All the details above are facts from testing without XIV SSD Cache which gets introduced now.
6) We have newly introduced XIV SSD cache (6TB) from IBM, which sits, on top of our SAN disks. This is a persistent cache and 80-90% of total hits, get data from this cache. When we run our application with index in memory it takes 4.5 hours to complete, but when we run our application with out index in memory it takes 1.3 hours to complete.
We are clueless now and thinking that way CQ5.4 manages indexes is the problem.
Any help will be greatly appreciated.
Thanks,
Harry.

Rendering constraints- cpu, memory

Imported a quicktime movie to FC (FC5.1) that needs to be rendered. It's taking about I5 minutes to do it. Looking at the CPU and memory monitors, I am only using about 30% and 50% respectively. Can I change any settings to optimize and speed this up or are there other constraints I'm unaware of?
Thanks.

How to get the CPU memory in JAVA?please send the
sample code for that..,No.
How to View the Memory Streaming(when do you do any
process) in JAVA?please send the sample code for
that..,No.
How to Allocate the Memory for one Process and
Remaining Memory for another Process in JAVA?please
send the sample code for that..,No.

RTMT CPU + Memory counters not showing

I just added a new subscriber to a cluster and the only issue I have is that RTMT is not showing the CPU + Memory stats for the new box.
It is showing disk usage and other statistics however.
Anyone else had this issue?

i see this at times and it fixes itself when you restart RTMT provided you dont get any AMC error or server unreachable errors when you log into RTMT.

CPU, Memory, Disk Capacity Monitoring

Similar Messages

Maybe you are looking for