CQ 5.6 client library - authorization failed on publisher
Hi,
I have been able to publish client library and can see them being added in the code in the "View Source" :
but when I click on any of the client libs created by me, all I get is an "Authorization Failed" message :
Could you please advice, how to fix this.
Thanks
Ankit
Hi Yogesh,
I used the embed property in /etc/design/geometrixx-media/clientlibs as show in the image :
and included the categories property of /etc/design/geometrixx-media/clientlibs, apps.geometrixx-media in my component as :
<cq:includeClientLib categories="apps.geometrixx-media.all"/>
but now my page has lost the css styling applied to it. Could you please suggest how to proceeed now ?
Thanks
Ankit
Similar Messages
-
BR0999E Loading of SQL client library orasql9.dll failed
Hi basis experts,
My SAP system is ECC 5.0 and the RDBMS is Oracle 10.2.0.2.0
I want to use transaction DB13 to make database backups, but it sendme
an error because it can´t connect to the database.
I try to use brtools to make a backup and sendme the error:
BR1001I BRSPACE 6.40 (39)
BR1002I Start of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0999E Loading of SQL client library orasql9.dll failed - please check
Oracle configuration
BR0310E Connect to database instance DES failed
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0280I BRSPACE time stamp: 2007-08-23 09.47.42
BR1007I BRSPACE terminated with errors
BR0292I Execution of BRSPACE finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them
or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2007-08-23 09.47.43
when I try to use any tool of brtools it sendme the same error all the
time.
I read that maybe I had an incorrect version of brtools, but in market
place I only found DBATOOLS Package for Oracle 9.2.x, this version
will work correctly with my Oracle 10.2.0.2.0????
How can I solve this problem??? Please helpme
Thanks in advance
Tania Rosasok,
go get BRTOOLS 7.00, you need that version to use brtools on Oracle 10g databases.
go at http://service.sap.com
entry by application group
SAP NetWeaver
SAP NETWEAVER
SAP NETWEAVER 2004S
Entry by Component
Application Server ABAP
choose proper kernel version (32 or 64-bit unicode or not)
Message was edited by:
Eric Brunelle -
10.6.4 Server L2TP VPN using external RADIUS - Authorization Failed
I'm using 10.6.4 with VPN L2TP configured successfully using local user database for authentication. Now i want to configure the VPN to use Steel Belted Radius server for authentication (that hooked up to another LDAP server) for authentication.
I've configured the VPN service to use the radius server, authentication to radius is occurring but i'm getting errors that the user is not authorized to use the VPN service.
Is there a way to configure 10.6's VPN service to authorize any user that successfully authenticates against Radius?
NOTE: I've played around with Server Admin's access for VPN, with it set to all users, everyone ect, this did not make any difference to the error i'm getting from the vpn service.
Here's the log out put when the connection fails.
2010-08-27 12:52:34 PDT Loading plugin /System/Library/Extensions/L2TP.ppp
2010-08-27 12:52:34 PDT Listening for connections...
2010-08-27 12:52:39 PDT Incoming call... Address given to client = 192.168.105.1
Fri Aug 27 12:52:39 2010 : Directory Services Authorization plugin initialized
Fri Aug 27 12:52:39 2010 : L2TP incoming call in progress from '[ip address redacted]'…
Fri Aug 27 12:52:39 2010 : L2TP received SCCRQ
Fri Aug 27 12:52:39 2010 : L2TP sent SCCRP
Fri Aug 27 12:52:39 2010 : L2TP received SCCCN
Fri Aug 27 12:52:39 2010 : L2TP received ICRQ
Fri Aug 27 12:52:39 2010 : L2TP sent ICRP
Fri Aug 27 12:52:39 2010 : L2TP received ICCN
Fri Aug 27 12:52:39 2010 : L2TP connection established.
Fri Aug 27 12:52:39 2010 : using link 0
Fri Aug 27 12:52:39 2010 : Using interface ppp0
Fri Aug 27 12:52:39 2010 : Connect: ppp0 <--> socket[34:18]
Fri Aug 27 12:52:39 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : lcp_reqci: returning CONFACK.
Fri Aug 27 12:52:39 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoReq id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : sent [CHAP Challenge id=0xc8 <086a03234947113037497f4326585a1f>, name = "OSX SERVER"]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoReq id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoRep id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoRep id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : rcvd [CHAP Response id=0xc8 <5ad3c0cb063694e473f51c9252e007f400000000000000003701b4fa8e7b844e072cddeceefa73 173d7415c85cae976700>, name = "USERNAME"]
Fri Aug 27 12:52:40 2010 : sent [CHAP Success id=0xc8 "S=934D6E79F45791A61C378789A4D719BC6F249574"]
*Fri Aug 27 12:52:40 2010 : CHAP peer authentication succeeded for USERNAME*
*Fri Aug 27 12:52:40 2010 : DSAccessControl plugin: User 'USERNAME' not authorized for access*
*Fri Aug 27 12:52:40 2010 : sent [LCP TermReq id=0x2 "Authorization failed"]*
Fri Aug 27 12:52:40 2010 : Connection terminated.
Fri Aug 27 12:52:40 2010 : L2TP disconnecting...
Fri Aug 27 12:52:40 2010 : L2TP sent CDN
Fri Aug 27 12:52:40 2010 : L2TP sent StopCCN
Fri Aug 27 12:52:40 2010 : L2TP disconnected
2010-08-27 12:52:40 PDT --> Client with address = 192.168.105.1 has hungup
Message was edited by: sarah maysI'm using 10.6.4 with VPN L2TP configured successfully using local user database for authentication. Now i want to configure the VPN to use Steel Belted Radius server for authentication (that hooked up to another LDAP server) for authentication.
I've configured the VPN service to use the radius server, authentication to radius is occurring but i'm getting errors that the user is not authorized to use the VPN service.
Is there a way to configure 10.6's VPN service to authorize any user that successfully authenticates against Radius?
NOTE: I've played around with Server Admin's access for VPN, with it set to all users, everyone ect, this did not make any difference to the error i'm getting from the vpn service.
Here's the log out put when the connection fails.
2010-08-27 12:52:34 PDT Loading plugin /System/Library/Extensions/L2TP.ppp
2010-08-27 12:52:34 PDT Listening for connections...
2010-08-27 12:52:39 PDT Incoming call... Address given to client = 192.168.105.1
Fri Aug 27 12:52:39 2010 : Directory Services Authorization plugin initialized
Fri Aug 27 12:52:39 2010 : L2TP incoming call in progress from '[ip address redacted]'…
Fri Aug 27 12:52:39 2010 : L2TP received SCCRQ
Fri Aug 27 12:52:39 2010 : L2TP sent SCCRP
Fri Aug 27 12:52:39 2010 : L2TP received SCCCN
Fri Aug 27 12:52:39 2010 : L2TP received ICRQ
Fri Aug 27 12:52:39 2010 : L2TP sent ICRP
Fri Aug 27 12:52:39 2010 : L2TP received ICCN
Fri Aug 27 12:52:39 2010 : L2TP connection established.
Fri Aug 27 12:52:39 2010 : using link 0
Fri Aug 27 12:52:39 2010 : Using interface ppp0
Fri Aug 27 12:52:39 2010 : Connect: ppp0 <--> socket[34:18]
Fri Aug 27 12:52:39 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : lcp_reqci: returning CONFACK.
Fri Aug 27 12:52:39 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoReq id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : sent [CHAP Challenge id=0xc8 <086a03234947113037497f4326585a1f>, name = "OSX SERVER"]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoReq id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoRep id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoRep id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : rcvd [CHAP Response id=0xc8 <5ad3c0cb063694e473f51c9252e007f400000000000000003701b4fa8e7b844e072cddeceefa73 173d7415c85cae976700>, name = "USERNAME"]
Fri Aug 27 12:52:40 2010 : sent [CHAP Success id=0xc8 "S=934D6E79F45791A61C378789A4D719BC6F249574"]
*Fri Aug 27 12:52:40 2010 : CHAP peer authentication succeeded for USERNAME*
*Fri Aug 27 12:52:40 2010 : DSAccessControl plugin: User 'USERNAME' not authorized for access*
*Fri Aug 27 12:52:40 2010 : sent [LCP TermReq id=0x2 "Authorization failed"]*
Fri Aug 27 12:52:40 2010 : Connection terminated.
Fri Aug 27 12:52:40 2010 : L2TP disconnecting...
Fri Aug 27 12:52:40 2010 : L2TP sent CDN
Fri Aug 27 12:52:40 2010 : L2TP sent StopCCN
Fri Aug 27 12:52:40 2010 : L2TP disconnected
2010-08-27 12:52:40 PDT --> Client with address = 192.168.105.1 has hungup
Message was edited by: sarah mays -
Couldn't initialize Oracle client library
Hi,gurus:
My IDES4.7 installed windows200 with DB oracle9I,it's ok before. but after i repaired the OS after a vital error, once i started the SAPMMC, first it's yellow, after a wile it's green but later the disp+work.exe turned grey.
the flowing is the log from dev_w2
Please do me a favor,thanks a lot.
trc file: "dev_w2", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 02 20:28:15 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' ...
B Library 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' loaded
B Version of 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno 00
M sid HFS
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 221
M intno 20020600
M make: multithreaded, ASCII
M pid 2404
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 2404) [dpxxdisp.c 1164]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M
M Wed Jul 02 20:28:16 2008
M DpShMCreate: sizeof(wp_adm) 13312 (832)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06DE0040, size: 2672144)
M DpShMCreate: allocated sys_adm at 06DE0040
M DpShMCreate: allocated wp_adm at 06DE17D8
M DpShMCreate: allocated tm_adm_list at 06DE4BD8
M DpShMCreate: allocated tm_adm at 06DE4C00
M DpShMCreate: allocated wp_ca_adm at 07029C40
M DpShMCreate: allocated appc_ca_adm at 0702E290
M DpShMCreate: allocated comm_adm_list at 0702FA00
M DpShMCreate: allocated comm_adm at 0702FA18
M DpShMCreate: allocated vmc_adm_list at 0705E818
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0705E840
M DpShMCreate: allocated wall_adm at 0705E848
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Jul 02 20:28:17 2008
M calling db_connect ...
C Prepending D:\oracle\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C *** ERROR => Couldn't initialize Oracle client library,
please check your installation!
[dbsloci.c 2015]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1282]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9696]
M
M Info for wp 2
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server shining_HFS_00 on host shining (wp 2)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 02 20:28:17 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9881
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 2 2404) [dpnttool.c 357]Hello Wang,
> C *** ERROR => Couldn't initialize Oracle client library,
Have you also restored / re-installed the oracle client libs on your windows system? It seems like the oracle client libs are missing.
Regards
Stefan -
Authorization failed when trying to connect Hyperion to BW 7.0
Hello gurus,
Using Hyperion interactive Reporting Studio, I try to access BW cubes.
I select OLE DB as connection type and SAP BW OLE DB provider, I am prompted for a BW system to connect to.
I then get the following error message:
OLE Error: 80040e4d
Error Source: MDrmSAP.2
Error Desciption: Authorization failed.
Using the same BW provider and the same BW user, I am able to connect form Excel.
So I wonder what the problem is.
Help really appreciated.
Alex-Hi Ingo,
I do not get any error while using the Universe Designer, I get this error when trying to connect a SAP BW related universe in Crystal Reports. There is no problem at all with WebIntelligence by the way. It is possible to connect a SAP BW related universe in WebIntelligence.
I use BO XI 3.0 with Crystal Reports 2008 and the SAP Integrations Kit client components are installed on the client machine.
Nevertheless the BO Enterprise system is not configured with SAP Authentification, but with an own authentification.
Best Regards,
Thomas -
ISE Alarm (WARNING): Dynamic Authorization Failed for Device
Hi all,
I am posting this discussion as previous posts that I have found in this forum have never been resolved or the resolution is not applicable to me.
I am using ISE 1.1.1.268 and WLC 7.2.111.3 and NAC agent version 4.9.1.6 on Windows 7 Client machines.
About once a day i get the error "ISE Alarm (WARNING): Dynamic Authorization Failed for Device".
The device it is reffering to is my NAD, a WLC 5508 running 7.2.111.3
I have looked at the logs and I cannot see anything in the logs which correcponds to this message so that I can troubleshoot further. Maybe I can if I am enabling the correct logging level on the correct ISE component.
Can someone suggest the components and the logging level that I should set to get some more detail about this error?
At the moment, I have only set debug logging on Active Directory. I have TRACE logging set on Posture, Runtime AAA & prrt-JNI.
I do not want to enable too much debug logs, so I was wondering whether anyone can help with a specific element that I should be debugging.
I thought debugging the posture element would be enough but when I look at the logs there is nothing there that relates to this message.
Can anyone help?
thanks
MarioFirstly, I wouldn't run a production deployment of ISE on 1.1.1.... 1.1.3 Patch 1 or 1.1.4 is the way to go.
Secondly, this error happen a lot, especially with Wireless, and it's not worth worrying about. I've had a couple of TAC cases opened for this and some similar errors, generally they're caused by a Client going to sleep, leaving the coverage area or otherwise leaving the WLC while ISE is trying to do something with it.
Only worry if you actually have a Client-impacting problem, which by the sounds of it, you don't. -
ISE: Dynamic Authorization Failed
Hi,
I am gettning warning messages in ISE saying
Cause:
Dynamic Authorization Failed for Device: 0002SWC003 (switch)
Details:
Dynamic Authorization Failed
It is not only on that switch but on all switches I have configured. I am using 3560 IPBase 12.2(55)SE6. I have configured them according to Trustsec 2.1.
My end devices are none-802.1x.
I can't figure out what is causing this error.
The thing is that I have not experienced any problem. In Live Authentications there are some 'Unknown' and 'Profiled' devices hitting the DenyAccess rule, but other then that everying is beeing Authorized fine.
Anyone got an idea what could be causing this error?
Regards,
PhilipThis is what I have found out.. Using ISE Version 1.1.1.268. If you go the logs page
Jan 10,13 7:39:12.147 AM
Dynamic Authorization failed
and then go to the details...
Failure Reason > Authentication Failure Code Lookup
Failure Reason :
11213 No response received from Network Access Device
Generated on:January 10, 2013 8:08:17 AM PST
Description
No response received from Network Access Device.
Resolution Steps
Check the connectivity between ISE and Network Access Device. Ensure that ISE is defined as Dynamic Authorization Client on Network Access Device and that CoA is supported on device.
...next check into Resolution Steps... -
5417 Dynamic Authorization failed
Hi guys,
Does anyone meet this Radius Error in Cisco ISE 1.2 and the switch 2960 12.2(55)SE7 ?
When i reauthentication the guest profile to the other profile using Radius CoA on the Self-Service Guest Workflow.
The error is :
Event
5417 Dynamic Authorization failed
Failure Reason
11103 RADIUS-Client encountered error during processing flow
Resolution
Do the following: 1) Verify shared secret matches on the ISE Server and corresponding AAA Client, External AAA Server or External RADIUS Token Server. 2) Check the AAA Client or External Server for hardware problems. 3) Check the network devices that connect the AAA peer to ISE for hardware problems. 4) Check whether the network device or AAA Client has any known RADIUS compatibility issues.
Root cause
RADIUS-Client encountered an error during processing flow
I checked all the resolution steps but the error sitll exsit.
I would greatly appreciate any help you can give me in working this problemAn internal error has been detected during the processing of an incoming RADIUS packet. Make sure that the client device is compatible with AD Agent, has been configured properly, and is functioning properly. Make sure that the same RADIUS shared secret has been properly configured, both in the client device and in AD Agent.
http://www.cisco.com/c/en/us/td/docs/security/ibf/setup_guide/ad_agent_setup_guide/ibf10_log_msgs.html -
Dynamic Authorization Failed - Posture with Guest Portal - ISE - WLC
Hello everybody,
I'm implementing a NAC solution based on Cisco ISE. Unfortunately, I'm facing a problem related to the CoA (Change of Authorization).
The guest can authenticate successfully via portal and then he is redirected to the page of client provisioning.
When he is compliant with the policy he gets access without any problem and this means that CoA works perfectly. The issue occurs when he has to remediate (download the file from ISE and install it). In this case, we need a change of authorization profile.
The authentication logs show that the posture status changed from non-compliant to compliant but the users doesn't obtain access .
Here are details :
Authentication Details
Source Timestamp
2015-04-30 18:43:13.179
Received Timestamp
2015-04-30 18:43:13.18
Policy Server
ISE-CISCO
Event
5417 Dynamic Authorization failed
Failure Reason
11213 No response received from Network Access Device after sending a Dynamic Authorization request
Resolution
Check the connectivity between ISE and Network Access Device. Ensure that ISE is defined as Dynamic Authorization Client on Network Access Device and that CoA is supported on device.
Root cause
No response received from Network Access Device after sending a Dynamic Authorization request
Username
User Type
Endpoint Id
E0:9D:31:07:**:**
Endpoint Profile
IP Address
Identity Store
Identity Group
Audit Session Id
ca0019ac00000003ae674255
Authentication Method
Authentication Protocol
Service Type
Network Device
WLC-1
Device Type
Location
NAS IP Address
172.25.0.202
NAS Port Id
NAS Port Type
Authorization Profile
Posture Status
Compliant
Security Group
Response Time
15002
Other Attributes
ConfigVersionId
4
RadiusPacketType
CoARequest
Event-Timestamp
1430415778
AcsSessionID
50149c2f-08fb-4f9d-b1b5-f655e71d039f
StepLatency
3=15001
Device IP Address
172.25.0.202
CiscoAVPair
subscriber:command=reauthenticate
audit-session-id
ca0019ac00000003ae674255
Session Events
2015-04-30 18:43:13.18
Dynamic Authorization failed
2015-04-30 18:41:44.159
Dynamic Authorization failed
2015-04-30 18:35:42.64
Guest Authentication Passed
2015-04-30 18:34:39.214
RADIUS Accounting start requestYou can use LWA for this . he WLC redirects the HTTP traffic to an internal or external server where the user is prompted to authenticate. The WLC then fetches the credentials (sent back via an HTTP GET request in the case of external server) and makes a RADIUS authentication. In the case of a guest user, an external server (such as Identity Service Engine (ISE) or NAC Guest Server (NGS)) is required as the portal provides features such as device registering and self-provisioning.
Refer to the following link for configuration example
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml -
Creating Client Installation Program fails
How do you install Remote Desktop on clients? Creating the client installation program fails every time I try. The error message is Apple unspecific ([translated] There was an error trying to access the required components. Please try again). This happens on the last page of the wizard.
Thanks.This command works far quicker for me IMO:
/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ki ckstart -activate -configure -clientopts -setmenuextra -menuextra no
Select your workstations and send the command as root. The above is all on one line. -
App store. Authorization failed. please connect to iTune
i was installing application from app store
and whenever i try to install it,
it keeps saying that Authorization failed. please connect to iTune.
and even if i connect with iTune, it still doesnt work.
please help me here..hi
My friend gave me some paid apps on a usb and i then put them into my itunes library, that worked. I then connect my ipod touch a start to sync. When it finishes it says "You are not athorized to use these apps". i tried athourising and deauthorising, still dosent work.
Can someone plz help me???????????? -
Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin WilsonHello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson -
Analysis Authorization failed for Multiprovider
Hi all,
We are facing an issue pertaining to the Analysis Authorization for a multiprovider. When we attempt to access a query base on a multiprovider, the program complains that it has insufficient authorization. So we did debugging in the customer exit and we realise it fails to populate the rest of the authorization variables in I_step = 0. Base on our initial investigation this only happens on queries on multiprovider, so is there anything I need to set or do to curb this error?
Many thanks!Best solution is to trace the authorization for your issue in ST01.
Switch on the trace in ST01 and start your work. if you face authoirzation check failed. look into the trace there you will find the logs and authorization failed for your userid.
And one more thing, have you got anything in SU53 as authorization check failed?
Hope this would help you. -
Hello! I recently replaced my tragically crashed Macbook Pro 2008 with a newer model and transferred my volumous iphoto library of 20 000+ photos to my new machine. To be able to use my iphoto '08 library with Aperture I had to upgrade the library in the iphoto '11 version. I left the computer on during the day, and when I got back it seemed to work fine. I browsed my library in Aperture and could see all the thumbnails, but looking closer I noticed a small yellow warning triangle with an arrow in the corner of some pictures. Turns out all pictures from before ~2010 are lost! When I wiev the photos I see nothing but the infinite black of the data void.
Here's how I've tried to fix the problem:
1. Opening the iPhoto Library package in Finder. All the folders for the earlier dates are there, but they are empty. I notice no incorrect or impossible dating, which seemed to be a common problem among users who's libraries where corrupted during the upgrade process.
2. Rebuilding the iphoto library in iphoto. No effect.
3. Recovering the iphoto library from my Time Machine Backup. SInce my old hard drive was just 200 GB, I stored all pictures older than one year on my external hard drive (note that about half of those pictures were successfully imported/upgraded). Both the internal and the external hard drive where backed up using Time Machine on a NAS from Seagate (Black Armor 110, 3TB). I was able to access backed up files on my external drive through Time Machine on my old computer, but since it is now rendered unbootable I tried using Migration Assistant to let my new computer inherit the old backup. However, I could not find the backup of the external drive in Migration Assistant, just my old internal drive. When I tried to access the backup volume on my NAS through Finder it didn't show up (I could find it that way on my old computer).
4. Googling "iPhoto library upgrade failed", or "Inheriting Time Machine backup of external drive", and similarily desperately specific phrases - Nothing useful. Other people seems to have had problems with corrupt Libraries, but I'm not sure that's the case here.
My pictures must exist somewhere on my computer and in a backup on my NAS. I just can't find them! Do anyone have a clue to what may have gone wrong? I'm afraid the computer might have gone to sleep during the upgrade, because I didn't thinkabout adjusting the power saving settings before starting it. But since pictures 1-8000-something are missing, it doesn't seem to have worked properly during the whole beginning of the upgrade, not just during the middle. As I knew I had a backup of the library I didn't worry about upgrading the single functional copy. From now on I will think thrice before doing anything as serious as this.
I am eternally grateful for any answers that might help me recovering my photos!
//Teodor Nilsonb) I split up my photo collection into two iphoto libraries. One for the new photos stored on my internal HD and one for photos older than one year stored on my external HD
And exactly How did you Split up your iPhoto library?
c) I used Migration Assistant in an attempt to access the Time Machine backup of my old MBP from my new MBP (by inheriting the backup). When I made my backups, I made sure Time Machine included the external HD. But Migration Assistant could only find the backup of my Internal HD with the library of new photos!
And again
You should not use Migration assistant on an iPhoto library - it generally does not work
and
d) When signing in and mounting the NAS in Finder, I used to be able to see a Time Machine backup folder/icon. Now I was unable to locate it.
I believe you are using your NAS for your Time Machine backup. If your Time Machine backup and/or your iPhoto library is on a NAS you will have problems - both need to be on Mac formatted volumes - the least troublsome is a volume formatted Mac OS extended (journaled)
http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US
Manually preparing a new disk for Time Machine
If you want to erase a disk before using it with Time Machine, follow these steps:
Open Disk Utility (located in the Utilities folder).
Connect the disk if it isn't already attached.
In the left side of the Disk Utility window, select the disk you want to use with Time Machine.
Optional: If you want to partition the disk, click the Partition tab and select a layout. Make sure "Mac OS Extended (Journaled)" is selected in the Format menu for the partition that will be used for backups. Click Apply.
Click the Erase tab.
Optional: If you want to securely erase the disk, click Security Options to configure, then click OK.
Click Erase.
After erasing, open Time Machine preferences in System Preferences and configure as described in the section above.
Are the iPhoto libraries kept on an external drive formated Mac OS extended (journaled)? Or are they on the NAS? - If you are using the NAS for iPhoto and/or Time Machine that is the source of your problems
LN -
hi
I keep getting error meesages on the ISE in regards to RADIUS
the error is
Dynamic Authorization failed : 1213 No response received from Network Access Device
i am using ISE version 1.1.1 and the NAD is a WLC running version 7.0.98.0
i use ISE to authenticate users via PEAP. I deleted the NAD and re-added it twice but i still keep getting this issue. this set up was working fine for the last few weeks.
i dont think location and device type would cause an issue to authentication under the NAD list
anyone have any ideas?the option i.e drop down box wasnt there. lookin at the compatibility chart of ISE 1.1.1 and WLC, minimum version for WLC is 7.2.103.0
Do you need to have RADIUS NAC enabled if the ISE is only used to authenticate corporate wireless users against AD. there is no CoA,
the other function is to use RADIUS as network management logon. to WLC using the AD. depending on the AD group , one could get priv 15 or priv 5 access. i am also using device attribute by location so that remote offices network enigineer cannot log onto the WLC. i.e i created a NAD , put it in a location and use that location AND the AD group to qualify for priv 15 access.
Coudl this policy interrupt the wireless RADIUS policy? Wireless policy is at the top of the list under authorization tab.
Maybe you are looking for
-
Polling DB Adapter example by Oracle
Hi, I am trying to implement the polling DB adapter example provided by oracle.I am using the option of deleting the rows after they were read.The below are my sql queries created. Polling SQL: SELECT TITLE, DIRECTOR, STARRING, SYNOPSIS, GENRE, RUN_T
-
after updating to 6.0.1 on my iphone 4 ... the wifi bearly works if at all and it dosent vibrate at all .. all settings are switched on ... any tips or ideas to these matters?
-
Regarding the Release Strategies not getting picked up for PR
Hi Gurus, 1 ) I have configured a new Release strategy with Plant,Total Value,AAC and Doc.type as the Characteristics.I have assigned that to a release class and assigned values to the characteristics. I have configured 6 release codes and 6 differen
-
Hi Experts, I am workin on the ESS Customizations. So I have deployed the following applications in EP server and configured the JCO connection in portal. Able to access the ESS package through portal. 1.BPERP4ESS_).sca 2.PCUIGP004_0-20000568.sca 3
-
IPod recognized on Mac computer but won't update!!! HELP!
I recently changed my computer from a Windows to a Macbook, and when I plug in my ipod it recognizes it on ITunes, and it comes up and everything, but then when I click "Update songs on Sarah's ipod" it doesn't do anything! What do I do??