Create a BI client in SM7.0
To implement the E2E monitoring on SM, we need to create a BI client.
1) How to create a BI client on SM?
2) We have a client100 which is used for CHARM. Can we use the same client for E2E?
Thanks a lot!
Hi,
For the BI client, please kindly refer to the master configuration guide, also you will need to check in the IMG under BI
setup->general setup for these
SETUP BI CLIENT
CREATE BI user at BI system
connect source system
It is necessary to create a BI client for solution manager diagnostics
and we recommend using a separate BI client .
The reason for the separate client are the DataSources.
These are not delivered with the BI content and the system
with the DataSources has to connect to the BI system as a
source system after activation of the DataSources in the source system.
In the active BI client the DataSources must be replicated and then
the content can be activated.
Please follow the recommendation in SPRO for the client copy in this
case as well.
Source: Client 000
Source User: Client 001
Target: Your new client
Profile : SAP_ALL
Hope this helps.
Cheers
SH
Similar Messages
-
How to create a VPN client for Windows Phone 8.1?
We have our own VPN client for Windows and Android. I would like to create a VPN client for Windows phone 8.1. After referring these site I found that there are some third
party VPN plugins available for WP 8.1.
I checked OpenVPN but it is also not available for WP 8.1.
Is there any APIs available for creating a VPN client in WP 8.1 similar to
VpnService provided by Android SDK ?The VPN APIs for WP8.1 are not open at this time.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
Error while creating the HTTP client with destination GB_DPSRetrieve
Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
KishoreHi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar -
How to create a WEB client in EJB module in NB 4.1 ?
hi
I am using SUN AS and NB 4.1
I want to invoke a WS from an EJB. For some reason NB 4.1 doesn't allow me to create a WS client. Why ?netbeans forum may prove to be more useful because
this seems to be a netbeans specific problem; an EJB
can be a WS client and this works as is evident with
the Adventure Builder sample app from blueprintsI generated WS stub manually without NB 4.1. -
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
RichHi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
XML Parser Error while creating Web service Client using JAX RPC
hello evryone,
Im facing XML Parser Error while creating web service client using JAX RPC. Im using Net Beans IDE for development purpose. I have wrote configuration file for client. Now i want to create Client stub. However i dont know how to do this in Net Beans. So i tried to do it from Command promt using command :
wscompile -gen:client -d build -classpath build config-wsdl.xml
here im getting Error:
error parsing configuration file: XML parsing error: com.sun.xml.rpc.sp.ParseException:10: XML declaration may only begin entities
Please help me out.
Many thanks in advance,
KaceeCan i use the client generated using jdeveloper 11g to import into the oracle forms 10g, i.e., form builder 10g. Currently this is the version we have in our office.
-
Create a Secure Client for a Secure Web Service- is failing
Hi,
This is actually with reference to the webservice tutorial.I am trying the example on Create a Secure Client for a Secure Web Service and have followed all the steps mentioned,however I am getting the following error:
D:\JDev11gTp\jdk\bin\javaw.exe -client -classpath D:\Jdev11gTpInstance\mywork\WebServiceApplications\.adf;D:\Jdev11gTpInstance\mywork\WebServiceApplications\WebServiceProjects\classes;D:\JDev11gTp\webservices\lib\jaxws-api.jar;D:\JDev11gTp\webservices\lib\jws-api.jar;D:\JDev11gTp\webservices\lib\orawsmetadata.jar;D:\JDev11gTp\webservices\lib\wsclient.jar;D:\JDev11gTp\j2ee\home\lib\activation.jar;D:\JDev11gTp\j2ee\home\lib\ejb.jar;D:\JDev11gTp\j2ee\home\lib\jms.jar;D:\JDev11gTp\j2ee\home\lib\jta.jar;D:\JDev11gTp\j2ee\home\lib\mail.jar;D:\JDev11gTp\j2ee\home\lib\servlet.jar;D:\JDev11gTp\webservices\lib\jaxrpc-api.jar;D:\JDev11gTp\webservices\lib\wsserver.jar;D:\JDev11gTp\webservices\lib\wssecurity.jar;D:\JDev11gTp\webservices\lib\wsdl.jar;D:\JDev11gTp\webservices\lib\orasaaj.jar;D:\JDev11gTp\webservices\lib\saaj-api.jar;D:\JDev11gTp\webservices\lib\orawsdl.jar;D:\JDev11gTp\webservices\lib\orawsrm.jar;D:\JDev11gTp\webservices\lib\orawsrel.jar;D:\JDev11gTp\webservices\lib\jaxr-api.jar;D:\JDev11gTp\webservices\lib\orajaxr.jar;D:\JDev11gTp\webservices\lib\relaxngDatatype.jar;D:\JDev11gTp\webservices\lib\xsdlib.jar;D:\JDev11gTp\webservices\lib\mdds.jar;D:\JDev11gTp\webservices\lib\wsif.jar;D:\JDev11gTp\webservices\lib\fabric-common.jar;D:\JDev11gTp\webservices\lib\fabric-interceptors.jar;D:\JDev11gTp\jlib\jaxen.jar;D:\JDev11gTp\jlib\oraclepki.jar;D:\JDev11gTp\jlib\ojpse.jar;D:\JDev11gTp\jlib\jsr106.jar;D:\JDev11gTp\jlib\jsr105.jar;D:\JDev11gTp\jlib\osdt_xmlsec_jce.jar;D:\JDev11gTp\jlib\osdt_wss_jce.jar;D:\JDev11gTp\jlib\osdt_saml_jce.jar;D:\JDev11gTp\jlib\osdt_saml2_jce.jar;D:\JDev11gTp\jlib\osdt_core.jar;D:\JDev11gTp\jlib\osdt_cert.jar;D:\JDev11gTp\jlib\osdt_xmlsec.jar;D:\JDev11gTp\jlib\osdt_wss.jar;D:\JDev11gTp\jlib\osdt_saml.jar;D:\JDev11gTp\jlib\osdt_saml2.jar;D:\JDev11gTp\jlib\ojmisc.jar;D:\JDev11gTp\j2ee\home\lib\http_client.jar;D:\JDev11gTp\j2ee\home\jazncore.jar;D:\JDev11gTp\j2ee\home\oc4jclient.jar;D:\JDev11gTp\rdbms\jlib\xdb.jar;D:\JDev11gTp\j2ee\home\lib\javax77.jar;D:\JDev11gTp\lib\java\api\jsr173_api.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-impl.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-xjc.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb1-impl.jar;D:\JDev11gTp\j2ee\home\lib\oc4j-schemas.jar;D:\JDev11gTp\jlib\ojdl.jar;D:\JDev11gTp\jlib\ojdl2.jar;D:\JDev11gTp\jlib\fmw_audit.jar;D:\JDev11gTp\j2ee\home\lib\jmxri.jar;D:\JDev11gTp\j2ee\home\lib\jmx_remote_api.jar;D:\JDev11gTp\j2ee\home\lib\adminclient.jar;D:\JDev11gTp\j2ee\home\lib\jmxframework.jar;D:\JDev11gTp\j2ee\home\lib\jmxspi.jar;D:\JDev11gTp\j2ee\home\lib\xmlcfg.jar;D:\JDev11gTp\jlib\dms.jar;D:\JDev11gTp\jlib\orai18n.jar;D:\JDev11gTp\j2ee\home\lib\commons-digester.jar;D:\JDev11gTp\j2ee\home\lib\spring.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-policy-core.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pmclient.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pap.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-agent.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-secpol.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javamodel-rt.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javatools-nodeps.jar;D:\JDev11gTp\lib\java\shared\oracle.toplink\11.1.1.0.0\toplink-sdo.jar;D:\JDev11gTp\lib\java\api\jaxb-api.jar;D:\JDev11gTp\lib\xmlparserv2.jar;D:\JDev11gTp\lib\xml.jar;D:\JDev11gTp\jakarta-taglibs\commons-logging-1.0.3\commons-logging.jar -Dhttp.proxyHost=localhost -Dhttp.proxyPort=8099 -Dhttp.nonProxyHosts= -Dhttps.proxyHost=localhost -Dhttps.proxyPort=8099 -Dhttps.nonProxyHosts= HelloPolicyPortClient
Feb 1, 2008 5:13:43 PM oracle.j2ee.ws.common.context.ContextInterceptor init
INFO: Context provider properties file not found
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-AGENT busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-AGENT filter=false auditor=oracle.security.audit.Auditor@143a083
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-PM-LIB busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-PM-LIB filter=false auditor=oracle.security.audit.Auditor@15af049
SEVERE: WSM-04514 An MDS error occurred.
SEVERE: WSM-09012 No key, WSM-06002, was found in the resource bundle oracle.wsm.resources.policyvalidation.PolicyValidationMessageBundle.
javax.xml.ws.WebServiceException: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:466)
at oracle.j2ee.ws.client.jaxws.WsClientProxyInvocationHandler.invoke(WsClientProxyInvocationHandler.java:204)
at $Proxy28.sayHello(Unknown Source)
at HelloPolicyPortClient.main(HelloPolicyPortClient.java:35)
Caused by: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.integration.platform.common.InterceptorChainImpl.createPolicyEnforcementException(InterceptorChainImpl.java:217)
at oracle.integration.platform.common.InterceptorChainImpl.processRequest(InterceptorChainImpl.java:104)
at oracle.j2ee.ws.client.mgmt.runtime.SuperClientInterceptorPipeline.handleRequest(SuperClientInterceptorPipeline.java:91)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:309)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:290)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:444)
... 3 more
Process exited with exit code 0.
Can anyone please give any clue as to why this error is coming?
Thanks.Hi
Please refer to this thread
Re: Can I create a login/password protection in Muse for a HTML5 page or two? -
Error while creating the HTTP client with destination
Hi ,
I am getting this error while connecting to https location on receiver channel . The below error i am getting in SXMB_moni
Error while creating the HTTP client with destination
The receiver party is doing some security setting on there end and for that purpose we have provided the external IP address to them , after that we are getting the above error.
We have already installed the client certificate on our staging server , and have done the correct setting in SM59 and channel.Check few things..
1) I believe you use specify destination for the addressing type field in the comm channel. If so make sure you entered valid target URL address in the SM59 of type http destination.
2) Check the validitity of the certificate. You can import the certificate both in java and abap stack.
3) Make sure certificate is installed as expected.
4) Send the request and talk to the target system and check what error information they get in their log related to ssl. -
A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
Hi All
I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
Log Name: System
Source: Schannel
Date: 10/04/2015 9:21:17 AM
Event ID: 36871
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer:
Description:
A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers
Any suggestions on where to look?
ThanksHi,
According to the event log, the issue is related to Schannel instead of Exchange.
Please try the following steps:
1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
2.In Local Security Settings, expand Local Policies, and then click Security Options.
3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
4. Ran gpupdate /force
If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
How to create a mail client using JavaMail and please mention what other softwares are required to do so?
What can we use to store the e-mail addresses? File or Database?
How to send and recieve attachments using JavaMail?
Is it possible
If I am sending the same mail to many recipients how do I hide the irrespective e-mail ids (i.e. the recipient must be able to see only his
e-mail id)
If possible please send us the code along with its explanation.
Please help me (Urgent).How to create a mail client using JavaMail and please
mention what other softwares are required to do so?The JavaMail download bundle has several examples of
mail clients.
What can we use to store the e-mail addresses? File
or Database?Certainly you could use either. Depends on what your
purpose is for storing them.
How to send and recieve attachments using JavaMail?Read the FAQ.
Is it possible
If I am sending the same mail to many recipients how
do I hide the irrespective e-mail ids (i.e. the
recipient must be able to see only his
e-mail id)Use Bcc.
If possible please send us the code along with its
explanation.It's all in the JavaMail download.
Please help me (Urgent).If it's so urgent, you should've tried reading the FAQ first. -
Create an IM client in Adobe Air
how to create an IM client in Adobe Air using Xiff AS3 library?
Problem is if i define internal table under code initialization of interface it does not come in the Form ...
Please tell me how to define internal table so that it can appear in Form as well.
I simply wants to display records of KNA1...Suggest whatever way you know..
Regards,
Gurmukh -
How to create a Java Client from a wsdl file...
Hi,
I am looking for an available option for calling a Cobol unit from a Java application( front end). I've used the MicroFocus tool for creating a wsdl file from our Cobol unit.. Now i want to use this wsdl file for creating a Java Client..
Can any one suggest a suitable solution (software that makes use of the already existing wsdl file and generate a Java Client for that) ASAP....
Thanks,
roopaHey you can create java client using Eclispe or WSAD or far that matter any other IDE. crate a project save the WSDLs in a package. Right click on WSDL goto webservice option. From there you can generate client.
cheers,
sapan
Is it still open ?
cheers,
sapan
Edited by: sapan on Feb 25, 2009 1:17 AM -
How to create Web Service Client from wsdl with digital signature?
Please, help me to create Web Service Client from wsdl with digital signature. I know create Web Service client from wsdl file and I know how to add digital signature to XML with jwsdp, but I don't know how to do it together.
Thanks.I'm handling security wit JAX-WS handler. So I insert "manually" ws-security tag and I encrypt (and sign) message parts.
On client side, all works fine, but on server side I obtain:
---Server Inbound SOAP message---|#]
Decrypting message and rebuilding Valuees... |#]
Starting decrypt|#]
. dectypted.!
--found following string: <ns1:addiziona><num1>80</num1><num2>22222</num2></ns1:addiziona>|#]
...MESSAGE Restored.|#]
<?xml version="1.0" ?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns:ns1="http://calculator.me.org/" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"><soapenv:Body><ns1:addiziona><num1>80</num1><num2>22222</num2></ns1:addiziona></soapenv:Body></soapenv:Envelope>|#]
Error in decoding SOAP Message
Error in decoding SOAP Message
at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.toInternalMessage(SOAPXMLDecoder.java:89)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.toMessageInfo(SOAPMessageDispatcher.java:187)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher$SoapInvoker.invoke(SOAPMessageDispatcher.java:571)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOAPMessageDispatcher.java:145)
at com.sun.xml.ws.server.Tie.handle(Tie.java:88)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3MessageDispatcher.java:160)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3MessageDispatcher.java:89)
at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpoint(EjbWebServiceServlet.java:178)
at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServiceServlet.java:109)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.java:100)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:71)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Caused by: javax.xml.ws.soap.SOAPFaultException: Cannot find the dispatch method
at com.sun.xml.ws.encoding.soap.SOAPDecoder.raiseFault(SOAPDecoder.java:674)
at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.decodeDispatchMethod(SOAPXMLDecoder.java:152)
at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeBodyContent(SOAPDecoder.java:337)
at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeBody(SOAPDecoder.java:327)
at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeEnvelope(SOAPDecoder.java:250)
at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.toInternalMessage(SOAPXMLDecoder.java:81)
... 29 more
|#]
--->handleFault O_o<---|#]If you have any idea for solving my problem, then I can post my simple example :(
Bye! -
How to create web service client
Hi All,
I am new to web services .Can any body explain how to create web service client ....
Please give the give the discription step wise.
Thanx
ArunHi Krishna,
Yes it is possible.
Check this Link
[JDeveloper Web Service|http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2]
http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2
I strongly suggest you to go for Eclipse, instead of Netbeans or Jdeveloper incase of WebService. If you want to run your code in all the Server without making any changes go for Eclipse based development for Web Service.
Kindly let me know if you need some more inputs.
Regards,
Zack -
Can we create a local client copy for the RFID Client in discovery Box
Can we create a local client copy for the RFID(400 Client) in the Discovery Box,and if created which profile we have to select for the client and also at a time we can work on these both client or not .
This isn't possible with Live Mail. Acrobat has an add-in for Outlook (which you've used), but there is no similar function for Live Mail.
Maybe you are looking for
-
Report Generation using Citadel & Excel in VB
I want to generate report using citadel sql server, i,am using excel for report viewing. I have written a Visual Basic code for fetching data from srq to excel. The problem is when i fetch all the fields from sql it generate report, but when i gave a
-
How to insert a JPG file into a Table from a Form?
I create a Schema and a Table as follows: SQL> create user myphoto identified by myphoto; User created. SQL> grant connect,resource to myphoto; Grant succeeded. SQL> create table myphoto.photo_table 2 (photo_id varchar2(10) primary key, 3 photo_conte
-
I just received a phone message from 800-000-0000 that said i was selected to receive a 50.00 credit on my bill and to go to myvz50.com and sign in to my account? Is this phishing scam or is it real? Does anyone know? Thanks for the help
-
I have done a sizing for 500K records spanning across three domains - customer, material, vendor domains with material being the major contributor of 400K records. For memory, sizing (based on MDM sizing guide) comes to 16GB. I find it quite low cons
-
How to draw class diagram in Visio 2013
Hi All, Recently, I purchase a Visio 2013 Pro. I have used Visio 2010 before. In Visio 2013, Compared with Visio 2010, There are BIG changes in Visio 2013. I have several questions for Visio 2013. 1. I don't know how to set in/out parameter in Visio